Change the connection style

Similar Questions

• When I try to log the p2p soulseek site, I get the error message "connection failed: socket error.» change the connection settings. How can I fix it?

  "socket error".

  When I try to log the p2p soulseek site, I get the error message "connection failed: socket error.» change the connection settings. How can I fix it? Is - this type of error called a winsock error?  It keeps happening to me on this site. What I've read, it happens when you make changes to a program before concluding that under its weight. Could it happen because I'm deleting files, I don't think that will be completed while the other files are D/Ling? That's what I'm doing wrong? I found a solution to correct an error in Winsock that is to enter the "command prompt" and type "netsh winsock. Will this work? (I'm sorry I have so many questions in this post, but I have had TO KNOW!!)

  Hello

  I suggest you send the question here for best support about the issue.

• Smartphones blackBerry how to change the connection mode for a BlackBerry Internet Service account on my 9700

  Got my first BB is the 9700 and I believe that my company doesn't have not BES, I must connect on my BIS via a computer to set up my work email (Microsoft Exchange Server). After having read about it and try, I get an error message on the Web site of my provider which basically means that I need to change the connection mode for a BlackBerry Internet Service account. I checked the site Web of Blackberry and the instructions do not work for my 9700. Can someone help me please?

  Thank you very much

  Buskroth

  the link provided should have addressed your question, if you "can't get there from here" - I would suggest that you contact your carrier because they need to move your account password enabled allowing connect you via a non - BB browser to set up your BIS email setting...

• change the line style for cell None

  Hi expert,

  How to change the line style for cell to zero.

  Respect of

  John

  my_cell.topEdgeStrokeColor = app.activeDocument.swatches.item("None");
  my_cell.leftEdgeStrokeColor = app.activeDocument.swatches.item("None");
  my_cell.bottomEdgeStrokeColor = app.activeDocument.swatches.item("None");
  my_cell.rightEdgeStrokeColor = app.activeDocument.swatches.item("None");
  

  Do not test, but should work.

• Is there a way to change the connection string to the database by using the command line on the virtual machine?

  Hi, I use 1.5 space Horizon

  can someone help me by telling me where I can change the connection string for the database on the virtual machine itself.

  I was away, and our stuff has been migrated databases to another server. Now my horizon does not connect because it can not find the database. I can either on the hwconfigurator.xxx.com.

  Thank you

  What do you see when you go to https://hwconfigurator.xxx.com?

  You can try to change this property in /usr/local/horizon/conf/runtime-config.properties on your service - will (s) and the server restart of tc by using the command "/etc/init.d/horizon-frontend restart".

  datastore. JDBC. URL = jdbc:PostgreSQL: / //saas? = stringtype unspecified

• How to change the border style of the list items in the apex

  
  Hi all

  We have created a few items from the selection list in the Apex and ask users to make changes to the border.

  I tried many ways, but he was not able to make changes, some could help me how we can change the border style of list items in Apex. By, the approach has been used by us

  Attributes of the element in the HTML form -> style = "" border: 1px solid #E5E4E2; "" [I speak that way] but no luck.

  Kind regards

  Sheikh tayeb.

  SruthiTamiri wrote:

  Hello

  Please find the details below

  APEX version # 3.2

  Internet Explorer version #7

  Mozilla version 12.0.

  Used theme #Blue

  Topic identification number is #12

  It is not possible to change the appearance of the borders of the selection list in IE7.

  To the borders of all the elements of the selection list style on a page in other browsers, include the following style sheet in the HTML Header page:

  .formlayout select {
    border: 1px solid #E5E4E2;
  }
  

  APEX 3.2 is no longer supported, and IE7 is obsolete. Upgrade to the current version is recommended.

• How can I change the connection to the NETWORK of a new Essbase cube?

  I developed a report EN by configuring Essbase 'A CUBE'
  
  Now, my client is that decommissioning, and they built a new Essbase "CUBE B"
  
  So, how can I change the connection to the NETWORK and assign a new cube?

  I guess that you have space to work.

  Within the workspace.

  1. go into tools-> change of database connections.
  2. Select the file that you want to change the source.
  3. click on OK
  4. change the Source with "replace with:" drop-down list, click OK.

  Dan

• Cannot change the connection in JReport

  Sorry if this is in the wrong forum, but I couldn't find a forum for JReport if I am posting this here. I use JReport 9.1. I'm trying to change the connection of database for the report. However, at the login screen, the JDBC URL is grayed and I can't change the URL. You can see in a screenshot here . How can I change the URL?
  
  Thank you!
  
  Published by: mkdz on November 2, 2012 11:05

  Simply go to the designer and file > Options. Select Catalog and uncheck the top, Forbid-properties of the output of the data object. Reopen the catalog browser and you can change the properties. You can also change the datasource.xml and you can override the values of the catalog.

  Greg Harris
  

• How to change the paragraph style to each paragraph that contains only one anchored object?

  Hello

  I have a document in word that should be converted in indesign. The document contains instructions, each step followed by an image.

  I managed to import the document into Indesign and applied a paragraph with numbering style to everything (text, image).

  Now, how do I change the the paragraph style to each paragraph that contains only an image? I need to get rid of the numbering.

  Thanks in advance.

  If the images are all anchored objects, you can use find/replace to find the anchor point and change the paragraph style only once for all paragraphs.

• Change the font style in a paragraph Style

  I have a code which changes the font of my paragraph style, but I also need to change the font style. I have the following code and the applied font style line is to throw an error.

  myStyle = app.activeDocument.paragraphStyleGroups.item("Headings").paragraphStyles.item("Heading 1");
  myStyle.appliedFont = "Microsoft JhengHei";
  myStyle.appliedFontStyle = "Bold";
  

  The code works without the last line in, but when he is in I get this error:

  

  I looked on the site Jongware under Font Style:

  http://jongware.mit.edu/idcsjs5.5/pc_ParagraphStyle.html

  RichardM0701 wrote:

  As in the model DOM is misleading or my code is wrong?

  Surely not! (This first one, by the way.) Check this page of DOM; ther eis no such thing as "appliedFontStyle" for paragraphs.

  You can give a more his style associated with an object police do (what you must look first), or as a string, but the string must have a special format:

  "family style [tab]".

  and since this is Javascript, you must type the tab as '\t ': character

  myStyle.appliedFont = "Microsoft JhengHei\tBold";
  

  (You also must be sure that this police more combo style actually exists, or well ID will always throw an error.)

  This 'trick' is not in the presentation of the DOM commands, because (uh) Adobe don't think to mention. But you should not use the command for the basic syntax reference, for that you need to read Adobe's Javascript Programming Guide, and I'm sure he gets mentioned in there.

• How can I change the connections of source and target OWB?

  Hello, I have hurt to change the connection to the source in OWB.
  
  My login name of source is identical to the front. That DB name, schema name is now moving to connect to the source. Here are the steps that I did.
  
  1. went to control Center Manager and cancel the mapping of source.
  2. is go explore connection and right click on the connection to the source, and then click Open Editor. change the username, ip address, password, name of the comic.
  3. goes to control Center Manager and redeploy the mapping. It does not work... It is said, table or view does not exist.
  
  Is there somewhere else I need to change... Somewhere, Miss me...
  
  Any help is appreciated...

  Hello

  Go to the module using the mentioned location.
  Change the module, set the location of metadata to the correct location
  Go to data locations, the correct location should be with selected locations. If so, remove it and place it again.

  Now, go to the configuration of the module and go to the Identification
  Check the value of the location and make sure that it uses the correct location

  I think it is sometimes useful to change the location to another location and back to the correct location.
  I hope this helps.

  Kind regards

  Emile

• Photoshop CS5 x 64 crash when changing the layer styles

  Hey there,

  I searched and searched through the entire interweb, but almost no one seems to have never had such a problem, so I think it is the right place to ask and hope to be helped . Short version is: Photoshop CS5 (x 64) is constantly crashing when you change a layer style.

  Recently, I installed my CS5 Design Premium on a new laptop (Fujitsu Lifebook AH351) and I have serious problems with Photoshop CS5. On the first run, everything was fine, and he keep like this for a while. Now every time I try to edit a layer style Photoshop crashes immediately. I did not need to change anything, just open the layer style, press OK and Photoshop has disappeared. I can work around by resetting the preferences that works until the next reboot, no matter if I change anything on the settings or not. Tried this on the initial version of the PS and the last update (12.0.4). Once I have reset settings yet, I can work again on the layer styles. Any of you have a similar problem or an allusion to what I could look at?

  The Lifebook has of a decent feature which I think somehow the culprit in this case: it has an on-board graphics unit and a separate GPU (nVidia GForce GT 525 M) that can be added in on a program basis. Indeed, Photoshop recognizes and allows me to enable the OpenGL functions as well, so from there, it seems. The internal GPU cannot be disabled because connect you your monitors.

  Some data on my system:

  Fujitsu Lifebook AH531

  • Intel® Core™ i5 - 2410M
  • RAM: 8 GB DDR3 1333 MHz
  • 750 GB SATA HDD 5400 U/Min
  • Windows 7 Home Premium x 64 (updated)
  • NVIDIA® GeForce® GT 525M with 1 GB of VRAM

  Photoshop CS5 x 64
  

  • no plugins to use/install
  • any settings not changed, not even shortcuts

  Thanks in advance

  enoversum
  

  WindowBlinds was probably to blame.  It's a bad app that changes the window settings and made generally bad things for the environment of the user interface to achieve a different look.

  There may be more options for things you can do (bad) to Windows, such as the screws of the metric of the display with the software from StarDock, simply because Windows is more popular - but if you don't about frivolous things with your system it can be as clean and steady work as a Mac system , if not better.  Mac have many of their own problems.

  -Christmas

• Insert a table in a mail, how can I change the color/style of the border?

  Hello, I think my question is simple, that I just haven't found how to change the color and style of the borders of a table that I inserted in an e-mail.

  Thanks in advance for your help

  Do exactly as described by guigs2.

  This image will help... see below.

  As before open table properties. Make sure you select 'Table' and then click 'Advanced Edit' button

  In HTML tab attributes

  • Type "bordercolor" in the "attribute".
  • in value, you can use the word for example: blue or type a string for example HTML color: #3333ff
  • Click OK to close the advanced properties editor
  • Click 'Apply' to see color.
  • Click OK to close the properties of the table.

  If you don't know HTML color string, you can find some here.
  In a normal write the message, click on the text color icon to open a small window of text color. When you select the color, it will show you the html string of the color, which must be the hash tag # before letters them and numbers.

• Power setting change the connection speed

  I don't know if anyone else has noticed this, but when I change my setting of symmetric power high performance on my laptop and when I start a stack and not connected to the adapter, I noticed a connection speed much more to my wireless router when I connect to the desktop computer. I'm curious because sometimes it wouldn't connect and join the star thingy and I have to reconnect but when I go to the balance or start on battery, the connection speed is almost instantaneous. I tried to uninstall my wireless driver and let the computer to reinstall the driver itself and it fixed a bit, I could connect automatically, more fast, but still not as fast as the balanced mode. Someone please tell me what to do because the problem is back.

  Hello Charles,

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  Have you made any changes to your computer hardware or software?

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the network troubleshooting and check.
  Refer to this article:
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If this does not help, then use method 2.

  Method 2:
  Please use the suggestions provided in this Microsoft support article and check.
  Reference:
  Why is my Internet connection so slow?
  http://Windows.Microsoft.com/en-us/Windows/why-Internet-connection-slow#why-Internet-connection-slow=Windows-7

  Important notes:
  Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• How to change the connection input language to English!

  Hello! everyone. I have Windows 7 on my laptop and it is protected by a password. I have the Nepali and English language in my laptop. Yesterday, when I restart my PC, it shows only Nepali keyboard in my login screen. But my password is in English. also I couldnot find language change option in the login screen. Please help me make the connection in English. I tried ALT + SHIFT to change the language, but nothing happened. Nepali language of all time is shown. WHAT SHOULD DO? Help me get out there!

  Hello! everyone. I have Windows 7 on my laptop and it is protected by a password. I have the Nepali and English language in my laptop. Yesterday, when I restart my PC, it shows only Nepali keyboard in my login screen. But my password is in English. also I couldnot find language change option in the login screen. Please help me make the connection in English. I tried ALT + SHIFT to change the language, but nothing happened. Nepali language of all time is shown. WHAT SHOULD DO? Help me get out there!

  In the upper left corner, there must be a panel of key exchange way like this... This picture is taken from one of my PC with windows 7 with the same parameter (here I have Sinhala and English key board)