Change the maximum size of the JVM heap to 1024 gives error

Similar Questions

• How to change the AIR FLASH of 1024 x 600

  Hello

  I have change the screen of 1024 x 600.

  but when I go into the FLASH AIR application, it turns back1024x600.

  so, how do to change the AIR FLASH of 1024 x 600.

  I want to give my application in 2 ways.

  1024 x 600 and 600 x 1024.

  I understand that it is your solution:

  Since Flash builder:

  1. run-> debug configurations

  2. Select "desktop" as launch method, then click on the button set up

  3. you can change the resolution of your playbook device (simple switch width and height,...)

  OR... you can choose to create a new mechanism of the reverse resolution.

  Another solution:

  Add 'landscape' or 'portrait' to pass in the XML file. If I remember correctly this automatically changes the resolution of the windows.

  On the playbook Simulator:

  If you choose to run your application on the device and to change your simple orientationmode a drag with your mouse to the bottom right in the middle. The Simulator will change its orientation

• Cannot change the power state of VM: internal error

  Hello

  I freshly installed OS elementary which is based on Ubuntu.

  VMWare Workstation installation worked fine, but after creating my new virtual machine with a Win 10, the same message comes to me:

  Cannot change the power state of VM: internal error

  I looked a little in the log file, found this dump was set to zero, they changed in etc/security /, but that's all I've managed to find.

  Here is my log file

  Thanks a lot for your help

  PS: I'm leaving a beginner in the Linux world, so explanation would be welcome

  Hello

  Welcome to the VMware community forums.

  I don't think that the problem is related to a beginner linux user, it's a problem triggered by a specific hardware configuration.

  If you look at your log file again, there is an error just before the vmware process attempts to core dump. The dump is a reaction to the problem.

  vmx| E105: PANIC: VERIFY bora/vmcore/vmx/main/timeTracker_user.c:238 bugNr=148722
  

  If you then put the bug number into google, you get:

  http://KB.VMware.com/kb/1227

  Which indicates in return you can set a configuration file to specify the actual frequency of your processor.

  Your processor is an Intel (r) Core i5-3570 CPU @ 3.40 GHz

  The linux variant of the config.ini file they speak on windows hosts is/etc/vmware/config

  --

  Wil

• Moved from VM with Snap Shots, doesn't start: cannot change the power state of VM: internal error

  Hello

  Last week, I decided to move from a Windows host based Linux system. So I went through my VMs their power off and copied to another drive. I then installed 7 Centos and reinstalled VMWare Workstation 12 re-imported the virtual machine in VMWare and I tried to start.

  I received the following message...

  "Cannot change the power state of VM: internal error.

  Suspicious, I looked at the folder that contains the machine virtual and noticed it contained snapshots. DOH!

  I guess it is pretty bad, not sure where to start?

  Any help would be appreciated.

  Thank you

  James

  I copied VM, with and without clichés, without problems. Have a few running on OSX Fusion so

  The first thing I would check would be for folders and .lck files. If so, remove them.

  Lou

• When I try to change the color I get a "program error" pop up message. I tried to restart my machine, but it makes no difference. Any ideas?

  When I try to change the color I get a "program error" pop up message. I tried to restart my machine, but it makes no difference. Any ideas?

  To reset the preferences:

  1. quit Photoshop

  2. open Finder

  3. click go in the menu bar and choose go to folder

  4. type in ~/library and click Go

  5. open the Preferences folder and rename the folder Adobe Photoshop CC2015 Settings settings Adobe Photoshop CC2015 old

  6. Restart Photoshop and try to change the color to see if the problem still occurs.

• IM have downloaded on windows 10 software adobe reader DC. Cannot install the update 15.009.20069 - gives error 1635. the drive is not all the functions associated with it - does not seem to download documents - opens in mocrosoft edge despiye moxilla fir

  I downloaded the CD player on windows 10. Unable to install the 15.009.20069 update. gives error 1635. Reader is not all functions available - documents opens on the edge of microsoft despite moxilla firefox as my default browser

  Hi Jacqueline,.

  Please check the steps in the article that Sukrit Dhingra shared with you. If in case the issue is not resolved with who perform a clean installation of drive using the cleaning tool and install offline using. Links provided below.

  Download Adobe Reader and Acrobat cleaning tool - Adobe Labs

  Adobe - Adobe Acrobat Reader DC Distribution

  To set the default on Windows 10 drive, try the steps from here: Reader/Acrobat is not the default PDF owner | Windows 10 threshold 2

  Thank you

  Abhishek

• Tecra S11 - change the resolution with FN keys gives an error

  Hello

  When I change the resolution of the screen with FN + space key combo, then background turns white and the icons on the desktop disappear. Windows 7 Professional / Tecra S11

  When you try, after FN + space press WIN + D (see the "D" esktop) combo and white background will appear.

  It's a Toshiba sw related issue or Win7

  Thank you

  Hi petersm,

  You may notice the behavior even if you change the screen resolution by using the options of the display driver?

  Maybe you need to reinstall Toshiba added value Pacakge that controls the FN keys

• How to change the screen resolution of 1024 x 768 to 1600 x 900

  original title: How can I update my computer for the new screen resulition my old system just to 1024 x 768 and my new moniter is 1600 x 900

  My computer is fine, but I like update the resolution of the screen, it is only 1024 x 768 and I would that he 1600 X 900, what can I'd to make do this

  Hello

  Thanks for posting in the Microsoft Community. Looks like you want to change the screen resolution of 1600 x 900.

  We need additional information about this problem to help you better:

  1. what version of Windows are you using?

  2. What is the brand and model of the computer?

  Visit this link to learn more about the operating system that you use:

  Operating system Windows am I running?

  http://Windows.Microsoft.com/en-in/Windows/which-operating-system

  Visit this link if you use Windows 7 to change the resolution:

  Change your screen resolution

  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

  Visit this link if you are using Windows Vista for change the resolution:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  In addition, check if the graphics card drivers are updated:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

• Darks Satellite L350 - 03 M: after changing the display resolution of 1024 x 768

  Hello

  I just bought a Satellite L350 - 03M and the resolution is set in 1440 by 900 and I want put it in 1024 x 768.

  When I do that I get 2 black inches around all 4 sides.

  Can someone tell me if there is a updated driver that can help? I have the same graphics card in my computer hp laptop, and it works beautiful changing screen resolutions.

  I tried the toshiba drivers for my laptop to type, but he says that they are up-to-date.

  What is a Canadian series laptop? It seems that Yes

  In any case
  If your laptop was using the Intel graphics card then check drivers for Intel graphics card Manager in the control panel.

  There is an option called image format Options.

  If I m not mistaken not it must be a framework which would set the full display screen

  So check it out!

• Trying to expand the space system restore automatic gives error 0x8007007B

  I just had a problem with a driver and wanted to use system restore.  To my great regret, my computer did not a single restore point.  When I went to do it manually, I found that its maximum use was 0% for the restoration of the system in the C drive.  I tried to increase it, but every time I press on apply or ok (an increase of any amount) the following message appears:

  "Could not apply the settings for the following reason: the file name, directory name or volume label syntax is incorrect." (0x8007007B).
  When I press ok, he said: "there was an unexpected error in the property page: (same message as above).»  Please close the property page and try again. »
  I've done the obvious reboot and so on, and it allows me to create a manual restore point, but won't automatically set restore points or be it me to increase the disk quotas.
  Any help would be greatly appreciated.
  (I use a clean install of Windows 7 Professional 32 bit, on a 3 GHz Pentum D, 1 500 gb SATA I partitioned the drive, 4 GB DDR2 and standard components, no software or special equipment).

  Hi sss68,

  Welcome to Microsoft Windows 7 answers Forum!

  The error 0x8007007B occurs when the system is configured to store restore points to a location or a bad way.
  Set the path to the appropriate Windows 7 restore point.
   
  To remove this error , perform the following solution:
  To set the path of the appropriate Windows 7, restore point as follows:
  1. click on start.
  The Start Menu appears.
  2. type sysdm.cpl in the start search box and press .
  The user account control window will prompt you for permission to run the program.
  3. click on continue.
  The System Properties window appears.
  4. click on the System Protection tab.
  5 under automatic restore points, clear all invalid location or duplicate
  6. click on verify drive C: with the Windows Logo
  7. click on apply, and then click Ok
   
  Create a system manually restore point:
  1 open the system by clicking the Start button, clicking Control Panel, clicking system and Maintenance, and then click System.
  2. in the left pane, click System Protection if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. click on the tab System Protection and then click on create.
  4. in the System Protection dialog box, type a description, and then click on create.
   
  Follow the document below for additional guidance on the creation of System Restore Point:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-restore-point

  It will be useful.
   
  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum.

• Select this OPTION to generate XML data from the table using XMLELEMENT, XMLAGG gives error ORA-19011 string buffer too small

  My select statement fails with the error:

  
  

  The ORA-19011 string buffer too small

  
  

  The select statement looks like:

  
  

  SELECT TO_CLOB)

  XMLELEMENT ("accounts",

  XMLELEMENT ("count",

  XMLATTRIBUTES)

  rownum AS "recordId."

  To_date('20130520','YYYYMMDD') AS "datestarted."

  123456 AS "previousBatchId."

  56789 AS 'previousRecordId '.

  ),

  ....

  .... .

  .....

  XMLFOREST)

  SIG_ROLE AS "SignatoryRole."

  To_char(TRANSFER_DATE,'YYYY-mm-DD') AS "TransferDate."

  NVL(Reason,0) AS 'reason '.

  ) AS the 'transfer '.

  )

  ()) AS CRDTRPT

  OF ANY_TABLE;

  • It looks like I can choose only 4000 characters using the SELECT statement (please, correct me if I'm wrong)

  I'd use the XMLGEN package. But the environment team says no mounted drives in the future with the arrival of the EXADATA.

  NO HARD DRIVE MOUNTED, NO ACCESS TO THE DATABASE DIRECTORIES

  No UTL_FILE

  I need to use the REEL spool the resulting XML data of the SELECT query.

  SQL is a standard in my org, but I can do with a PL/SQL solution also to load data into a table (cannot use a COIL with PL/SQL)

  What I do is:

  1. a column of type CLOB to a xml_report of the loading of the above SELECT query table
  2. Then using SELECT * FROM xml_report to SPOOL the data to a file report.xml

  No need of XMLTYPE data behind. Xml data stream is fine for me.

  In addition, I need to validate the XML file, also using XSD.

  Problem is that the resulting lines of the select query are supposed to be from 15000 to 20000 bytes long.

  Oracle database version: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  A Suggestion or a solution to this problem would be appreciated.

  (Sorry for the use of "BOLD", just to make it more readable and highlight the imp points)

  Bravo!

  Rahul

  It looks like I can choose only 4000 characters using the SELECT statement (please, correct me if I'm wrong)

  You use the right method.

  There is an implicit conversion from XMLType to the data type VARCHAR2 as expected by the function TO_CLOB, where the limitation, and the error.

  To serialize XMLType to CLOB, use the XMLSerialize function:

  SELECT XMLSerialize (DOCUMENT

  XMLELEMENT ("accounts",

  ...

  )

  )

  OF ANY_TABLE;

  For the rest of the requirement, I wish you good luck trying to spool the XML correctly.

  You may need to play around with the SET LONG and SET LONGCHUNKSIZE commands to operate.

• The JVM maximum heap size

  I upgraded the memory in my server today from 1 GB to 4 GB.
  
  Went to set the size of the heap max 2 GB instead of 512 MB, and CF wouldn't restart.
  
  Manually changed the file config and is went back up to 1 GB (even a doubling of the size) and all is well.
  
  Tried to manually edit to something greater than 1 GB, and CF server would not restart.
  
  I did a lot of research on this and found conflicting info, etc..
  
  East Alexander, c. Adam or anyone out there who knows the suggested/best/reasoning for setting?
  
  CF MX 6.1 updated; IIS 6, Windows 2003 server, SQL 2003 sp 4.
  
  Thank you
  
  Mike

  There are approximately 1.3 GB limit by the JVM heap. It's one thing to 32-bit.

  Send with a 64-bit JVM, then you can go higher. But Adobe only goes to support on Solaris.

  If you want more, go to the company and turn additional instances.

• Change the frequency AO AO DC voltage scanning scan?

  Hi all

  I am very new to labview, but find the forums and examples extremely helpful. I probably spend 50 + hours to familiarize myself with tutorials and general information, but I am at a point where I need your help.

  I'm unable to change the example "AO frequency sweep" found here (see custom_sweep_1.VI) to allow me to sweep the voltage.  My instinct is that I don't need of the ' waveform buffer generation VI ' and that I should be able to remove the associated entries since I'm only interested in a sweep of DC voltage. It is also called create_log_frequencies.VI, and I'm fairly certain that I can use it as written and simply change "frequency", "tension". My work of the custom_sweep_1 changes are attached as custom_sweep_Voltage.

  The problems I am having with the edition of custom_sweep_1 are:

  (1) I don't think I understand very well how or if the parameters associated with waveform buffer generation VI relate to a sweep of DC voltage.

  (2) an extension of 1): the loop depends on the samples and Cycles by buffer and I don't know how / whether to replace these values

  (3) the .VI DAQmx Timing (sample clock) receives its sampling frequency of output waveform buffer generation VI, but I think I can use 1/scan time to replace this (?)

  (4) the DAQmx Write.VI gets waveform buffer generation data, but if I can get around this VI and AO tension of wire directly to write DAQmx then I think I can use minimum voltage as my entry of data (?)

  (5) after the implementation of these changes, the custom_sweep_Voltage runs, but I get error 200609:

  "The possible reasons:

  Generation cannot be started because the size of the selected buffer is too small.

  Increase the size of the buffer.

  Choose the size of the buffer: 1
  Minimum required buffer size: 2

  "Task name: _unnamedTask<3A>"

  I also note that I tried other ways to create the sweep of voltage DC VI:

  (1) I have tried change the tracer IV example (found here), but it's much more confused than change the frequency sweep.

  ( This tutorial and sample 2) block diagram looks like straighforward, and I also work on understanding what Assistants DAQ 1,2, 3.

  Any return would be great. I think it is clear that at the very least, my poor understanding of 'buffer' is if the cause of my confusion about the change of frequency scan, please do not hesitate to share any information you have.

  Thank you very much for the help,

  -Esperanza

  Additional information on my project/progress using labview follows below:

  My final goal is to determine whether or not the resistivity of a sample of organic driver changes over time. For this I want to compose a VI simultaneously sweeping the output voltage DC-5 to 5V periodically during 24 hours and measure the voltage drops to my load resistance (to determine the current in the circuit) and the sample. I use a USB 6259 DAQmx and that you have correctly configured my circuit. I work two screws that I created with the DAQ assistant and by changing some of the examples, I found online. Output voltage (of an AO) but I have to manually select the voltage value. The second reads voltages in three samples of interest and writes the data to a PDM file. If you've read this extreme sensation and still make a contribution, my next goal after finding how to sweep the voltage is to combine this with my VI measure VI. I think it will be relatively simple, but still, I rejoice in all your comments!

  I solved this problem. I have changed my approach to be similar to the last link in my post. AO frequency scan approach is much more complicated that I need. Thanks for the help.

  -Esperanza

• How can I check the JVM memory usage?

  Hi all
  
  I had a number of applications that run in Weblogic running in the same JVM. Is there a way to monitor the memory usage of the JVM heap for a particular application?
  
  If I do

  ps -ef | grep java

  I can see the process, but how can I check the FMV of each of the applications memory usage? Thank you very much.

  No Linux command will be made available within a JAVA virtual machine running an application server and understand how much his memory belongs to a specific web - app.

• How can I change the target directory for NOR-DAQ 6.9.3?

  I try to install NOR-DAQ 6.9.3 on a new laptop computer.  I tried to change the target directory, but the installer does not allow me to change it.  Is it possible to change the directory?

  When you say that the installation program does not let you change the directory target, you receive an error?  In my view, is it possible to change the target directory by selecting the feature in the feature tree, then by manually changing the target directory to the bottom of the installer.  When this is done, a pop up will occur who says a new folder will be created to save the files to.