Change the operational language of the program?

Similar Questions

• How tio changes the programs installation directory, I want to install?

  How tio changes the programs installation directory, I want to install? I'm trying to install a lot of programs is always installed in "Local disk C" that low memory space. Please tell me how can I install the programs in other folders such as "Local disk D and E and F. And also please tell me that the directory in which the widows is installed when reached about his memory limit, does windows performance issues.

  Win needs 15% free space for proper operation.

  Using various hacks registry posted on various sites to redirect the default program installation folder to another drive is not supported by MS and can cause problems.

  Most of the programs when you install them have the option for a custom install, where you can specify where / which drive to install, but not all programs have this option. Even if you install a separate drive various files/folders will be written on victory drive.

  If the drives D, E & F are separate partitions of a disk, you will need to modify/extend partition in win

• Display screen when changing the programs problem

  I have a C670 - 17L and just recently I started having problems when switching between programs on the taskbar. Already when I used to click to change the programs screen of the selected program would open quickly. Now, it's much slower - it shows behavior similar to discoloration in transition on a Powerpoint presentation. Instead of a good quick change, it takes a few seconds.

  The only changes I did install Mozilla Thunderbird and Norton Internet Security, but I don't see why that should make a difference.

  Any help would be greatly appreciated - it's starting to drive me crazy!

  >.. .and Norton Internet Security...
  Remove Norton from the system and check if there is a difference. As far as I know that Norton is well known for slow performance s notebook due to his activity in the background.

  If you want to have the right antivirus software install Avira antivir.

• How to change the programs that load when Windows starts

  In simple terms... How to change the programs that load when Windows starts?  Because my boot time is slow in arriving at my login screen!

  Download and run the "Autoruns" from Microsoft Sysinternals freeware:

  < http://technet.microsoft.com/en-us/sysinternals/bb963902="">

  It lists all programs that start at startup and allows you to disable it by simply removing a check mark.  This makes it easy to reverse in case something goes wrong.

  HTH,
  JW

• How can I change the program I want to open with pictures?

  I changed my autoplay for "photoshop elements" but still open in Picasa photos (after restarting twice). " Please help, thanks, IK

  Hello

  Perform the steps in the article to set the default program for a file and see if the problem is solved or not.

  Change the programs that Windows uses by default

  Hope that helps.

• I, stupid, changed the program by default to a BAT file to the cmd prompt, well, now I can't run the batch files now, please help!

  I, stupid, changed the program by default to a BAT file to the cmd prompt, well, now I can't run the batch files now, please help!

  Hi William,.

  Welcome to the Microsoft community.

  Batch file is a type of script file, a text file, containing a series of commands to be executed by the command prompt. When you run a batch file, it opens the command prompt to run the scripts.

  It would be great if you can answer the following questions:

  1. what happens when you try to run a batch file?

  2 are. what batch file you referring?

  3. the problem occurs for a particular batch file?

  First of all, I suggest you to check the commands written in a batch file. To do the same thing, just right-click on the batch file, and then click change. It will open Notepad with the list of orders scripted for this particular batch file.

  If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• Accidentally, I changed the program that opens the models LR, and now I am unable to restore.

  Can someone tell me how I can change the program back to LR?

  Maybe this video answers your question: http://lightroomkillertips.com/lightroom-video-installing-and-organizing-your-presets-in-l ightroom-5 /

• How can I change the programs 'start' in windows.

  I did a search and he was told to open Windows Defender and click Tools... etc. and change it there, however, I am running Windows Security Essentials, which automatically turn off Windows Defender... so I can't do it this way. Can anyone help?

  Thank you

  Hello

  If you must change the startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial;

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this program;

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• By pressing alt + tab to change the program or pressing tab to move to the next cell to enter a web page is causing Firefox to open new tab

  A new tab is opened in Firefox (started only today) when I do the following
  1. press alt + tab when in Firefox
  2. press tab to change the cell data entry in a web page
  3. press the direction keys (one of the up - down - left - right)

  Update Firefox to Firefox 13 (released today) and then try to reset Firefox. This will fix most of the problems with Firefox that people experience. Refresh Firefox – reset the parameters and modules

• Cannot use Alt - Tab to change the program and that it causes another similar question of program

  Hello

  When I hold Alt and Tab close, it will bring up a menu for me to choose some programs.  But the problem is now this menu will not stay longer than 2 seconds, I release the key for sure.   And at the same time, my other program has the similar problem, when I left click it used to bring up a temporary menu and I would move and choose, since I have this program Alt - Tab, I have this problem on the program (Ninjatrader).

  I tried to disable all services in windows and the boot menu, nothing works.

  I remember the laptop starting up during midnight, and the next day he has this problem.

  It's very strange and interesting.    Would be - this hacker or some sort of glitch in windows vista?

  Thank you.

  Hi MoreYummy,

  1. what desktop theme you are using?

  First try this step below and check if the program selection menu will appear.

  Method 1

  Try pressing the keys CTRL + Windows + TAB. You can then press TAB to cycle through the windows. (You can also press RIGHT ARROW or ARROW down to navigate forward one window, or press LEFT ARROW or UP ARROW to navigate to the back office.) Press ESC to close Flip 3D.

  Using Windows Flip 3D
  http://Windows.Microsoft.com/en-us/Windows-Vista/using-Windows-Flip-3D

  Method 2

  Check if the problem persists in safe mode.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
  Restart the computer to return to normal mode

  Method 3

  If the problem persists in safe mode, then it is possible that the system files are corrupted on the computer where the origin of the problem.
  I suggest that you run a SFC scan, which would be a system file corrupt on the computer search and replace.

  Scan SFC enforcement procedure:
  1. click on the Start button
  2. in the Start Menu, click all programs Accessories followed
  3. in the Accessories menu, right click on the command line option
  4. in the menu that appears, click on the option "Run as Administrator"
  5 If you have the enabled User Account Control (UAC) you will be asked to consent to the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.
  6. in the command prompt window, type: sfc/scannow then press enter
  7. a message is displayed to indicate that "the analysis of the system will start.
  8. be patient because the analysis may take some time
  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue
  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.
  11 after the scan finished, close the command prompt window reboot the computer and check.
  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista installation CD.

  For more information please visit the link below.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I change the programs that start automatically when I turn on my computer?

  I have several programs that slow down my departure upward.  I didn't not use programs and would that they won't start does not automatically.

  I have several programs that slow down my departure upward.  I didn't not use programs and would that they won't start does not automatically.

  First of all, note that you should be in * all * the programs that start automatically, not only with those who are in the system tray. Not all the programs auto-start manifesting by an icon in the status bar.

  On each program, you don't want to automatically start, check its Options to see if she has the choice to not start (make sure that you actually choose to not run, not simply a "don't display the icon" option). Many can easily and better be arrested like that. If this does not work, run MSCONFIG from the start. Run the line and on the Startup tab, uncheck the programs that you do not want to automatically start.

  However, if I were you, I wouldn't do this just for the purpose of the minimum number of running programs. Despite what a lot of people tell you, you should be concerned, not with the way * a lot * of these programs you run, but * that *. Some of them can seriously affect the performance, but others have no effect on performance.

  Don't stop all programs to run willy-nilly. What you need to do is to determine what each program is that its value is for you and what the performance cost is running all the time. You can try searching the Internet and ask questions about the details here.

  Once you have this information, you can make a smart informed decision on what you want to keep and what you want to get rid of.

• is it possible to change the programically application icon?

  Hello

  Is it possible to change an icon from the app itself, IE on the writing of the file of the icon or the change of the. Bar, etc. I know that I don't have write access to the assets ect but is there a way to get around this?

  Thank you

  Hello-

  You cannot change the descriptor of bar or resource assets in bars signed and sealed, except through an update/version of the software.

  An alternative, could by removing & recreate application on the homescreen shortcuts but this is not possible using the current SDK. This may be available on upcoming kits.

  Why do you want to change the icon of the application programmatically?

  Thank you
  Kareem.

• urgent! How to change the program simultaneous .out file naming rule

  I want to change the output to sysadmin. < request_id > name.
  where and how to make this change?
  Thanks in advance!

  Hi Tao;

  I want to change the output name in sysadmin. .

  Check it Please Note: how to change the output File Naming Convention [1034453.6 ID], I belive that you will find some answer in

  Respect of
  HELIOS

• How can I change the program that opens pdf files attached to e-mails?

  When I double-clicked first a pdf attachment in an email, a pop asking what program to use and if I still wanted to use this program. I select an application to open these types of files and then check mark the box "Yes". However, I selected the wrong application. Now, this application tries to open all PDFs. I need to change it to the correct application. How do I do that? Thank you.

  Tools (Alt - T) - Options - spare - Incoming
  Search PDF in the column "Content Type". Then set the action that you want in the "Action" column.

• How do I change the program used to open mailto links in windows 8

  I would like to use Firefox to open Mailto links in Windows 8. I found this article of support, but it is not relevant for Windows 8: https://support.mozilla.org/en-US/kb/change-program-used-open-email-links?esab=a & as = aaq

  When I open Control Panel-> default programs and try to associate the Mailto with Firefox, the only options it gives me are "Mail" (the Metro app I'm moving away) and "seek an app in the store. No Firefox. How can I get Firefox to show up in the list of applications that can be associated with Mailto? Thanks much for any help.

  john99,

  OK, I am clear now. Thanks again for taking so much time to help. I am very grateful.

• Accidentally changed the program by default to open all the exe. files for the wrong program and need a fix

  Any help for my dumbass would be appreciated. Laughing out loud

  Hi davidlangston,

  What version of Windows you are running on the computer?

  Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
  Difficulty of broken desktop shortcuts and common system maintenance tasks

  Note: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Method 2: Run the fixit available in the article below to fix the problem automatically

  When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program

  http://support.Microsoft.com/kb/950505

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  You might want to know

  What version of the operating system Windows am I running?
  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running