DSLR-A380 will not take photo and resets all settings
My DSLR-A380 has had this problem under and turned off for a while now, but now it seems finally kaput. The camera turns on good and works as normal, except that the pictures will not save. When the trigger is depressed, it looks like he took the picture, the FVO screen goes black as if previewing the image loading, but then it resets and there is no saved photo. I had several people try to take photos and in different scenes/light, and it's the same problem. For a while, this seemed to happen randomly whenever I turned on the device. Sometimes it would work. Sometimes not. Now, it seems to be permanent. I tried to change all of the possible settings, but the given parameters to zero when I take a picture, including the aperture, shutter speed and ISO. The same problem occurs with Auto, manual or any other scene/priority setting.
Battery is fully charged. Memory card room, is released and inserted correctly. The only reason I can think is that I dropped the camera on the concrete on a year and a half. He fell from lens face down. But I use the camera since then. It's only this week that it is dead.
The camera needs to be repaired or replaced? I wouldn't replace the camera if there is a small patch.
Strange things happen when the rechargeable batteries are aging. The fact to keep settings to reset is the most significant symptom, and that being the case, I don't think that there is more need to do a "hard reset." In fact, he wouldn't have enough 'juice' to format a new card.
Tags: Sony Products
Similar Questions
-
My i-phone 5 will not take photos or videos
My i-phone 5 will not take photos or videos
Start here: get help with the camera on your iPhone, iPad or iPod touch - Apple Support
-
Camera will not take photos or make videos.
I use the LX-7000 LifeCam, and it will not just take pictures or start recording a video. For photos of troubleshooting specific;
I can't capture photos, or I can't see the video.
Check the following:
- Audio and video settings are properly adjusted. For more information, see audio and video settings.
- Closed all other programs that may be using the LifeCam. (You don't have to close your instant messaging for the LifeCam program work.)
- Your LifeCam lens is not covered or blocked and that the LifeCam has enough lighting.
- Try to disconnect and reconnect the LifeCam.
- Try to disconnect other unused USB devices.
- Try using a different USB port on the computer. Connect to a USB 2.0 port, if you can.
- If you use a USB hub, try unplugging the hub and rather the LifeCam directly on your computer.
-I just checked and made sure everything on that list is done but it still won't let me click the photo icon, which also indicates that I have to click to take a picture. What could be wrong?
Hi GabeisHungry,
You can try the following steps and check if it helps.
Uninstall and reinstall the drivers for the life Cam.
1. click on Start
2 type devmgmt.msc in start search and press ENTER.
3. in Device Manager , look for the device for life cam right click top and select the Uninstalloption.
4. restart the computer, the life cam plug-in and verification.
You can try to update the latest drivers by following the link:
You can also check out the following link and try the suggested steps:
Set the empty preview, "initialization error" or 'no camera not connected' error in the LifeCam software
http://support.Microsoft.com/kb/933311
Hope this information is useful.
Boumediene. K.
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
When taken in Webcam, it is recognized but will not take photo
I buy a webcam for my pc. When I plug it to the PC it recognizes, but it won't take a picture. I try to restart my pc and it still does the same thing. I buy, so I can use it to communcate with my daughter and see my little girl who lives in new jersey.
If it comes with an installation cd, and then install the drivers for the webcam from the installation cd.
most cd installers will be autorun when inserted in the cd/dvd players.
If prompted, select your webcam model from the list and follow the additional installation instructions.
After installation of the webcam driver, click the webcam shortcut to change the settings so that you can now create or take photos/videos.
-
I can't print because a barrier print job is in the queue and refuses to move. I try to remove it and it will not delete. Its label as file mtml (mtml:A07448 - 1464-4478 - one...) I plugged the printer off and unplugged and waited, but he still does not move.
I was unable to delete the file in question.
-
WMP library went crazy! The song in my library are missing. When I try to delete files from my library, it won't remove them and when I try to add new files to the library, it will not add them. Help, please!
Hi ljatos,
You can try this link to add folders to your library?If you're still having problems, you can try to restore your windows media player.(1) Perform SFC first. Follow the link on how to make SFC (http://support.microsoft.com/kb/929833)
(2) turn on / off Windows Media Player again.
a. go to start and in the search type 'Turn Windows has or not'.
b. click on the "Turn Windows features on or off".
c. check the "media features.
d. restart the computer.
You can also try restore (http://windows.microsoft.com/en-us/windows7/products/features/system-restore) your computer to the final point where windows media player worked.
Or you can use the previous versions of windows media player that comes from restore points or windows backup.
Or you can try to run 'Fixit '.
http://support.Microsoft.com/mats/windows_media_player_diagnostic/
-
Lightroom will not export photos and crashing constantly
Lightroom exports photos. He is so slow what anyone and seems to crash just as I have no star to choose library / develop / print etc.
Please help if I cancel my subscription and find something else
I had an album to convey to a client tomorrow and now can not...
Please press F5 on the keyboard, and it should display the Panel.
-
Original title: I have an an OEM vista upgrade and the pc will not take my product code. It is said that it will expire in 2 days. Thanks, Mike
I have an an OEM vista upgrade and the pc will not take my product code. It is said that it will expire in 2 days. Thanks, Mike
Hi Mike,
Thanks for posting your question in the Microsoft Community.
I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.
To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:
1. What is the error message that is accurate or complete?
2. have you made any recent hardware or exchange of software on your computer before the show?I suggest you to go through the following articles and check if that helps.
Error message when you start Windows Vista: "your activation period has expired".
http://support.Microsoft.com/kb/925616Resolve activation problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-activation-problemsHow to activate Windows Vista
http://support.Microsoft.com/kb/940315How to contact a Microsoft Product Activation Center by phone
http://support.Microsoft.com/kb/950929For more information:
Validation failed? These scenarios may help to explain why.
http://www.Microsoft.com/genuine/downloads/FailureScenarios.aspx?displaylang=enIf anything in my post is not clear or if you have other questions, do not hesitate to let us know. It is our pleasure to be of service.
-
Hi, I keep getting a message on my task bar that says I need to update my Microsoft account password. But whenever I have it try says there is an error and will not take my password. I can't connect to my outlook to check the mail of Mr. I already tried to change my password, but even with the new password I get the same results. Help, please! Thank you!
Hey Kevin,
If the issue that you are facing is everything by signing to Ebay, I suggest you to contact the Ebay support for assistance.
Please see the link below to learn more:
http://pages.eBay.com/help/account/contact-customer-support.html
If you need help with Windows, get back to us, we will be more than happy to help you.
Thank you.
-
I bought the DC of Adobe Acrobat pro and completed the info online, but when I use the cd with the product code key it will not take the code? What do I do then?
Thanks Anubha Goel, final I got it to work... The serial number in the physical box that you buy in the store wasn't the number for the software. It was the serial number in the cloud, very difficult to know when you see a serial number in the box with the Cd online. But thanks for the reply to my post. I'll be in offline mode after clicking on answer... Thank YOU Ana Maria
-
It seems that wrapped text will not host photo resizing without cutting and pasting the image resized, is - what the Muse way is suppose to work?
It would be the default path to wrap the text with the image when you work in Design view.
This document explains more:
https://helpx.Adobe.com/Muse/using/wrapping-text-image.html
Thank you
Sanjit
-
Why the iPhone 6plus will not open photos app on mac pro for IOS 10 update.
Why the iPhone 6plus will not open photos app on mac pro for IOS 10 update.
A message appears on the iphone asks you to trust the computer it is attached (mac pro 10.10.5)You type 'Confidence' and nothing happens. the photos on mac app publishes this message.
This Mac not yet have been granted access to the media on 'my iPhone '. To import media to this Mac, press 'Trust' on 'my iPhone '. You must first unlock the device.
This actually solved for me after going to settings, General, reset, reset the location and privacy... and then plug in the unit and pressing the trust... hope that works for others.
-
My iPhone will not send photos or other documents directly from in Apps
My iPhone 5 has always been able to send photos directly from the Photo App, as well as sending PDF files directly from the Pages App or other documents from other applications. Now, it is no more the case. After hitting the "send" - button, you hear the his "Whoosh"but nothing is actually sent! ".
I discovered only after people complained to me for not getting points I thought that I had sent.
When you import the same documents in Mail, there is no problem at all they are sent. The problem exists only IN applications.
I tried to restart the phone several times as well as resetting - no change.
It isn't a question of 2 check points.
I would be very grateful if someone knew the solution to this problem.
See you soon!
I think the next thing I would try is to reset all settings. Settings > general > reset > reset all settings. This will return t e the device settings, to where they were out of the box - to the factory settings. You will need to enter all the settings again including WiFi passwords.
If this does not work, back up, restore settings, and then restore the backup. If it still does not work, restore like new.
How to clear your iOS device and then set up as a new device or restore from backups - Apple Support
The backup of your iPhone, iPad and iPod touch - Apple Support
Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support
-
IPod classic 120 GB Version 2.0.1 PC model MB562LL
EQ off while playing with headphones and will not on. No EQ settings are sensitive. Center dial is pressed in EQ mode, IPod switches back on the settings Menu. This happens for all settings of the EQUALIZER. I did a hard reset by holding down the Center button and the menu button, but it did not work.
Try to go to the display settings on the iPod. Select reset settings (bottom of screen). This resets all settings on board by default (the data are not affected). Try to use the settings of the EQUALIZER again.
-
The iPhone running Skype, will not take a call, it's like the ring time is set to zero, it takes callers I would but gives the caller a busy year, any help please, thank you Ken
I had the same problem - fixed it:
https://support.Skype.com/en/FAQ/FA10981/how-do-i-delete-my-shared-XML-file
Make sure that you log out of Skype on your iPhone and PC. After you delete the file, restart Skype on your computer and connect to recreate the file. The journal of Skype on your computer and in to Skype on your iPhone.
Maybe you are looking for
-
Satellite L30-105 (PSL33E) Windows Vista does not see the DVD - ram UJ-850 s
Hello I have a Satellite L30-105 (PSL33E) with windows Vista. Windows Vista does not recognize the DVD - ram. BIOS recognize DVD-ram. I tried to download the drivers for the DVD-ram, but they are not on the side of Toshiba. Who can help me to get the
-
Is it possible to synchronize music and photos from iTunes from multiple computers?
We have two MacBook Pro - one for me and one for my children. Currently, I manage all the music and pictures via my Mac (synchronization of iOS devices), so there is a place for all the music and photos. However, children now want to be able to manag
-
Mac Mail response and forward problem
Today, without making any changes to my Mac, I found myself unable to reply or forward emails. I use El Capitan 10.11.2 and Mail 9.2 (3112). When I click on the button opens a blank message window, but it does not display the message to that I say, a
-
Siri will not stop me give a military even if time the "time of 24 hours' has been disabled in my settings. How do I change AM/PM?
-
How to extract 1 ASA and put them in the new table
Hello Can someone tell me how to extract a table and put in the new table. (eg. I have a table with no 1 to 1000, I would extract only 1, 30, 60, 90,...) ? Please advise me. Thank you concerning