Change the output state if the connection is lost

Similar Questions

• Cannot change the connection in JReport

  Sorry if this is in the wrong forum, but I couldn't find a forum for JReport if I am posting this here. I use JReport 9.1. I'm trying to change the connection of database for the report. However, at the login screen, the JDBC URL is grayed and I can't change the URL. You can see in a screenshot here . How can I change the URL?
  
  Thank you!
  
  Published by: mkdz on November 2, 2012 11:05

  Simply go to the designer and file > Options. Select Catalog and uncheck the top, Forbid-properties of the output of the data object. Reopen the catalog browser and you can change the properties. You can also change the datasource.xml and you can override the values of the catalog.

  Greg Harris
  

• When I try to log the p2p soulseek site, I get the error message "connection failed: socket error.» change the connection settings. How can I fix it?

  "socket error".

  When I try to log the p2p soulseek site, I get the error message "connection failed: socket error.» change the connection settings. How can I fix it? Is - this type of error called a winsock error?  It keeps happening to me on this site. What I've read, it happens when you make changes to a program before concluding that under its weight. Could it happen because I'm deleting files, I don't think that will be completed while the other files are D/Ling? That's what I'm doing wrong? I found a solution to correct an error in Winsock that is to enter the "command prompt" and type "netsh winsock. Will this work? (I'm sorry I have so many questions in this post, but I have had TO KNOW!!)

  Hello

  I suggest you send the question here for best support about the issue.

• Smartphones blackBerry how to change the connection mode for a BlackBerry Internet Service account on my 9700

  Got my first BB is the 9700 and I believe that my company doesn't have not BES, I must connect on my BIS via a computer to set up my work email (Microsoft Exchange Server). After having read about it and try, I get an error message on the Web site of my provider which basically means that I need to change the connection mode for a BlackBerry Internet Service account. I checked the site Web of Blackberry and the instructions do not work for my 9700. Can someone help me please?

  Thank you very much

  Buskroth

  the link provided should have addressed your question, if you "can't get there from here" - I would suggest that you contact your carrier because they need to move your account password enabled allowing connect you via a non - BB browser to set up your BIS email setting...

• Is there a way to change the connection string to the database by using the command line on the virtual machine?

  Hi, I use 1.5 space Horizon

  can someone help me by telling me where I can change the connection string for the database on the virtual machine itself.

  I was away, and our stuff has been migrated databases to another server. Now my horizon does not connect because it can not find the database. I can either on the hwconfigurator.xxx.com.

  Thank you

  What do you see when you go to https://hwconfigurator.xxx.com?

  You can try to change this property in /usr/local/horizon/conf/runtime-config.properties on your service - will (s) and the server restart of tc by using the command "/etc/init.d/horizon-frontend restart".

  datastore. JDBC. URL = jdbc:PostgreSQL: / //saas? = stringtype unspecified

• How can I change the connection to the NETWORK of a new Essbase cube?

  I developed a report EN by configuring Essbase 'A CUBE'
  
  Now, my client is that decommissioning, and they built a new Essbase "CUBE B"
  
  So, how can I change the connection to the NETWORK and assign a new cube?

  I guess that you have space to work.

  Within the workspace.

  1. go into tools-> change of database connections.
  2. Select the file that you want to change the source.
  3. click on OK
  4. change the Source with "replace with:" drop-down list, click OK.

  Dan

• How can I change the connections of source and target OWB?

  Hello, I have hurt to change the connection to the source in OWB.
  
  My login name of source is identical to the front. That DB name, schema name is now moving to connect to the source. Here are the steps that I did.
  
  1. went to control Center Manager and cancel the mapping of source.
  2. is go explore connection and right click on the connection to the source, and then click Open Editor. change the username, ip address, password, name of the comic.
  3. goes to control Center Manager and redeploy the mapping. It does not work... It is said, table or view does not exist.
  
  Is there somewhere else I need to change... Somewhere, Miss me...
  
  Any help is appreciated...

  Hello

  Go to the module using the mentioned location.
  Change the module, set the location of metadata to the correct location
  Go to data locations, the correct location should be with selected locations. If so, remove it and place it again.

  Now, go to the configuration of the module and go to the Identification
  Check the value of the location and make sure that it uses the correct location

  I think it is sometimes useful to change the location to another location and back to the correct location.
  I hope this helps.

  Kind regards

  Emile

• I copy student PS CS6 which works fine except when I'm disconnected from online, why is this and what can I do to make this work if the connection is lost. In addition, everything will work OK if I update to Windows 8 for windows 10?

  I copy student PS CS6 which works fine except when I'm disconnected from online, why is this and what can I do to make this work if the connection is lost. In addition, everything will work OK if I update to Windows 8 for windows 10?

  Yes, Photoshop should work fine without the internet connection, as this is the standalone version.

• Find data of select statement - Oracle 11 g after having changed the connection?

  IAM very very new to Oracle. Only yesterday I installed Oracle 11 G and created database - JafferDB
  
  Oracle SQL Developer, I created a named connection - JafferCon and also given SID... and the role is - SYSDBA
  And I excute the Sub statement
  
  insert into MyTable1 Values ('AAA1', 'BBB1', "CCC1")
  insert into MyTable1 Values ("AAA2", 'BBB2', "CCC2")
  
  Then I checked by a Select statement, it showed the values... No problem...
  But, as a test, I removed the connection and created a new tio of connection to the same database with a different name
  
  and when I checked by the Select statement..., it has not shown the values...?
  Made mistakes...?
  Thanks for the directions...

  After insert, update, or delete data in the database you must use the statement "commit" or "dismantling". If you want to 'save' the changes or cancellation, if you do not have to commit.
  Other users cannot see what new changes until you do the "commit".

• Change the connection style

  Hello I want users to be able to enter user name and password when they click on their account to logon windows. If you have installed windows stabilized, you get this "USER DIFFERENT" account that can do the same thing in the name of user and password?

  Thank you

  Thanks for the information.  I just downloaded and installed Microsoft Steady State 2.5 to see what you are taling about (although I don't really need the program in my situation, but I didn't know it even existed and I Koe case where something like this could help someone tha more the solution I provided so thank you to knowledge - just because I spend a lot of time on this Forum do me not to the) current all Microsoft products as he proves it).

  Now I see what you mean by alternative connection model and see how it varies what offers Vista. Vista has no way to change the screen to look like this - it can only use the very limited options he has available.

  Check out Stardiock to http://www.stardock.com/products/logonstudio/ , where you have a certain number of options of choice login screen (and links to hundreds more on the web).  I don't know if the one you want is one of those that are available, but it could be (and you can even find one that you like even better).  Reading further, this may just change the background of the connection - not the best so it may not apply in your situation (but I could be wrong). Frankly, I don't have the time to download and get it myself - but if you want to try, feel free to do so.

  To change the style of logon to the old style used by the previous operating systems, follow these steps:

  -Click Start
  -Click on Control Panel
  -Click on system and Maintenance
  -Click on Administrative Tools
  -Double click on local security policy
  -In the left pane, click the triangle next to local policy
  -In the left pane, click Security Options
  -In the right pane, double-click on "Interactive logon: do not display the last."
  user name ".
  -Click on active and then OK

  I spent 2 hours looking for options, but I can't find those that match what you want (or any way to actually change the style if Logon Studio doesn't do the trick.  I checked the registry to HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem\\\ entries, but could find no option to create the image that you are looking for (even if it can adjust the style of the screen in different ways).  If you decide to try this, make sure you first create a restore point and back up the registry just in case.

  I'm sorry, but I can't find what you want and I don't honestly think that it is available, even if a 3rd party product.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Power setting change the connection speed

  I don't know if anyone else has noticed this, but when I change my setting of symmetric power high performance on my laptop and when I start a stack and not connected to the adapter, I noticed a connection speed much more to my wireless router when I connect to the desktop computer. I'm curious because sometimes it wouldn't connect and join the star thingy and I have to reconnect but when I go to the balance or start on battery, the connection speed is almost instantaneous. I tried to uninstall my wireless driver and let the computer to reinstall the driver itself and it fixed a bit, I could connect automatically, more fast, but still not as fast as the balanced mode. Someone please tell me what to do because the problem is back.

  Hello Charles,

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  Have you made any changes to your computer hardware or software?

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the network troubleshooting and check.
  Refer to this article:
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If this does not help, then use method 2.

  Method 2:
  Please use the suggestions provided in this Microsoft support article and check.
  Reference:
  Why is my Internet connection so slow?
  http://Windows.Microsoft.com/en-us/Windows/why-Internet-connection-slow#why-Internet-connection-slow=Windows-7

  Important notes:
  Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• How to change the connection input language to English!

  Hello! everyone. I have Windows 7 on my laptop and it is protected by a password. I have the Nepali and English language in my laptop. Yesterday, when I restart my PC, it shows only Nepali keyboard in my login screen. But my password is in English. also I couldnot find language change option in the login screen. Please help me make the connection in English. I tried ALT + SHIFT to change the language, but nothing happened. Nepali language of all time is shown. WHAT SHOULD DO? Help me get out there!

  Hello! everyone. I have Windows 7 on my laptop and it is protected by a password. I have the Nepali and English language in my laptop. Yesterday, when I restart my PC, it shows only Nepali keyboard in my login screen. But my password is in English. also I couldnot find language change option in the login screen. Please help me make the connection in English. I tried ALT + SHIFT to change the language, but nothing happened. Nepali language of all time is shown. WHAT SHOULD DO? Help me get out there!

  In the upper left corner, there must be a panel of key exchange way like this... This picture is taken from one of my PC with windows 7 with the same parameter (here I have Sinhala and English key board)

  

• How to change the connection attribute in ODSEE?

  Hello
  Can someone help me how to change the default login of ODSEE attribute? By default, cn is used as username to sign in on ODSEE but I want to change it to the new attribute for example uid. All relevant information not found online? Anyone has an idea about this?
  
  Thanks in advance.
  
  Thank you
  Olga

  It isn't really a "connection attribute" for LDAP.

  As mentioned above, how you "login" really depends on the application.

  "Connect" (BIND) in the most common way, you send a LINK demand, and the DN of the user input and the password of the user.
  The LDAP server locates the input from the user through the DN, then encrypts the password provided and compares the encrypted value to the one stored in the user input.
  If they match, the CONNECTION succeeds, and this particular TCP connection is "connected".

  Where things differ between applications is in the way they get the DN of the user.

  No request (AFAIK) only requires the user to type in its DN.
  The user will enter his login name. This name will be stored as an attribute in user input. The only real constraint on the attribute is that he must have a syntax that allows human readable characters as the value (the login name) and there must be a method to ensure that the value is unique in all instances of the attribute (not 100% true, but suggests so for our purposes here).

  So we have a name - say "Fred".
  Using this name, that we must find the one and only entries that has the attribute that we will use (say cn) to contain the user name.

  There are basically two ways to do it.

  The most traditional method assumes that all user entries are stored under a specific node - lets say "or is people, dc is company, dc = com"
  so that the user DNs use CN as the RDN, would be Dn of Fred: cn = Fred, or = people, dc = company, dc = com.

  Simplistic applications will simply have a dn, something like skeleton: cn =, ou = people, dc = company, dc = com

  They will take the name of the user supplies and replace with this name, then use pray DN deadlocked.
  The problem is that this is not always the case that user input is stored together like that and some really pathetic apps will be "cn =" party hard coded so your user was worth better have a DN beginning with cn = and not uid =.

  Modern applications most often perform a search to locate the unique name. The research will use a filter something like (uid = fred) fo find the DN of the entry where the UID attribute has the value "fred". This unique name is then used in the BIND request.

  This second method is much more flexible, especially if the application allows you to specify your own search and does not assume its always going to start with "uid ="... Unfortunately, many applications still do.

  The only downside to this second method (apart from a little bit more work for the application developer) is that the application requires permissions to perform its search, the attribute he seeks REALLY needs to have an index of equality and, of course, overhead of a supplementary search for each user authentication.

  So - as noted above, you can use any attribute you want, but do depend on so your application is able to use.

• How do I change the connection to the source in OWB?

  Hello
  
  Currently my connection to the source has read/write privileges. For security reasons, I created reading only one schema in the source database.
  Now, I want to change my user name in the mapping of source.
  
  I'm going to explore connection.
  
  Click on the location
  Click on database
  Click on oracle
  right click on the name of the source (the existing one), click on the editor.
  
  When I click on the editor, I see all the modules are grayed out. I couldn't change anything.
  
  How can I change the username of connection current source?
  
  Any help is appreciated...

  You must cancel the registration of the location of OWB in Control Center Manager, then you can change the properties and save location. Don't forget this may impact deployed mappings that reference, so those who were to be redeployed (the connectors/dblinks more if they were far etc...).

  See you soon
  David

• Changing the connections of bridge without virtual network Editor

  I wish I could change the bridged network adapter without using the virtual network Editor, i.e. via a script or VIX. COM.

  The only files I found related to the virtual network editor are those located in the C:\ProgramData\VMware\, which none does not seem to allow me to specify the actual card to use in the bridge. While these files allow to specify which virtual network to use, I have to go a little further and change the real device for the virtual network. So instead of change between 'vmnet0' or "vmnet1", I need to change the NIC vmnet0 uses.

  I am running VMware Workstation 8.0.4 on Windows 7 64 bit.

  Thank you

  Luke

  On the Windows 2003 hosts, I used to do it like this:

  net stop vmnetbridge
  -then regedit key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\VMnetBridge\Parameters\Adapters
  -When does
  net start vmnetbridge