Change the parameter Prototype of a Module DLL TestStand Programmaticaly

Similar Questions

• Change the parameter [] strings in a sub - bound dynamically VI

  I'm in a situation where I need to use the sub-panels to dynamically bind subVIs for data entry. I also like having the calling VI to change the [] parameter strings several enumerations in the Subvi, but this doesn't seem to be possible, as the Subvi is not in edit mode. Does anyone know of a way around this?

  I read data from a file to initialize the enums, so that I can have the Sub - VI read the file instead, but I was hoping to do it once in the main VI and send strings to the subVIs to speed up execution.

  Thank you!

  derekemuff wrote:

  I read data from a file to initialize the enums, so that I can have the Sub - VI read the file instead, but I was hoping to do it once in the main VI and send strings to the subVIs to speed up execution.

  It's impossible.  Enums are set in stone at run time.  Oh wait, you try to use the script running.  Sorry, it does not work.  Note that the property for the [Strings] node for the enum is blue?  That tells you it is a script node and is useful for mounting screws over time edit.

  As RavensFan said, you use a ring.  Their data type is a real number.

• change the parameter db_recovery_file_dest

  Hello!
  
  We use oracle 10g on windows 2008r2. the flash recovery area is d:\fra. in recent months the amount of data has increased considerably, then move the fra to another (of course largest) partition/hard disk.
  
  now the question: is it possible to change the setting "db_recovery_file_dest' from d:\fra to e:\fra and then copy the games of backup and archive logs to the new location OR is - it enough to change the parameter and oracle knows that data before changing the setting must be placed in d:\fra? hope this is understandable... ;-)
  
  Thanks in advance!
  
  Ciao,.
  Christian

  Hello;

  Yes, you can change it and it should work fine.

  The catalogue will know on older backups, so it shouldn't be a problem.

  alter system set db_recovery_file_dest='e:\fra';
  

  No doubt it would change too: (at the same time)

  alter system set db_recovery_file_dest_size=??G scope=both;
  

  The audit is easy

  SQL>show parameter db_recovery
  

  Do NOT move the old files. Oracle will bark.

  If you want more than all of the files from an MRE old new FIU, follow the link

  http://download.Oracle.com/docs/CD/B19306_01/backup.102/b14191/TOC.htm

  Best regards

  mseberg

• A30 - still cannot change the parameter memory

  Hi, yesterday I asked if someone could help me change my memory of graphics chip integrated 32 MB to 64 MB on my satellite A30. Sascha suggested goin to view properties and adjusting the frame buffer, but there is no frame buffer setting.

  He says that the maximum memory for the graphics chip is 64 MB on my system, so I think there must be a way to change.

  Any help?

  Hi Neil,

  As Sacha has suggested how to change your frame buffer size is: -.

  1 Control Panel-> display
  2. click on the option "settings".
  3. click on the "Advanced" option
  4. click on the tab "frame buffer".
  5. Select your desired menu frame buffer size drop-down.
  6. click on 'apply '.

  Note that you can also do in the configuration menu of the BIOS (F2 during the boot process). Change the value of the AMU to your chosen size.

  Kind regards

• How to change the parameter default slot 'Style layer'-'Stroke '?

  Whenever I use "Layer Style"-> "Stroke", the default value is always red for 'Color' and 3.0 for the 'size '.  I would like to change the size and the color by default, so that I don't have the change of these parameters each time that I use "Style of layer"-> "Stroke".  Anyone know how to change the default settings?  Thanks in advance.

  Preset animations are the way to go. I have a library of more than 200 that I created to speed to the top of my work. Learn how to create them and use them by typing "create a preset" in the search help field in the upper right corner of the AE and dig through the resources you will find. The first link will get you started: using After Effects | Animation and effects presets overview

• Problems for existing VM after you change the parameter VT PowerEdge 2950?

  Hello

  We have ESXi 4 installed, a number of servers windows 2003 32 bit running but need to install Server 2008 64 bit. Didn't know that these parameters were until he is tried to install 64 bit OS and got the error message. I read through other posts, but haven't seen a direct answer to this question:

  Are there any negative potential impact for my 32-bit servers existing after I enter and change VT enabled, NX enabled?

  Thank you

  cwhicks wrote:

  Are there any negative potential impact for my 32-bit servers existing after I enter and change VT enabled, NX enabled?

  No.; for 32-bit Windows 2003 by default execution mode is binary translation, if VT is enabled in the BIOS.

  If your Windows 2003 guests are running with SP2, you may find that you can get better performance by changing the mode of execution to VT - x (or VT-x/EPT on systems with EFA).  Before SP2, you definitely want to stay with binary translation.

• Change the parameter value in RTF model

  Hello
  Sorry if possible change a setting value of RTF model?
  Thank you for the ideas!

  Why can't use you the variable xdoxslt changed for her?
  Initialize the variable with a value of parameter.
  Reset the condition variable and use it.

• In the previous version of Firefox, I could close the window and still have my tabs intact when I reopened it. Why 4 FF closes all tabs and does not give me an option to save? (And if so, where can I change the parameter?)

  In the previous version of Firefox, before closing a window with tabs open, he asked if I would "save and close", "close all tabs" or "Cancel". FF4 comes to warn me that I am fill these tabs and wonder is I want to continue, without giving the option to save my search for later use.

  See if this post will help you

  https://support.Mozilla.com/en-us/questions/801145

  GW

• Definition of the parameters of the VI in LabView Action Module with TestStand API

  I started playing with the API, TestStand, and I have questions on how to configure a TSAdp.LabViewModule.

  I use a few examples of NOR and the community of developers to get started:
  http://www.NI.com/example/30263/en/
  https://decibel.NI.com/content/docs/doc-18401

  These examples work as I expect and I understand them.  I am struggling with how to specify VI parameter values in the module when the step type is 'Action '.  In other words, how to set these parameters?

  

  All the examples I see use of step types that have defined fields, which are accessible through the API with 'AsPropertyObject '.  The action type, by default, has the result field.

  Set the values of the parameters of a VI with the API TestSTand?  If so, how?

  Thank you

  Jacob

  Well, I thought about it on my own so I figure I'd share the solution:

  

• Changing the setting multichannel for VM RDM disk

  Hello

  I'm looking for a way to automatically change the parameter all RDM (for VMS) records multi-channel

  Do you know how to achieve this.

  You can try this

  # Get all RDMs
  $RDMs = Get-VM | Get-HardDisk | where{$_.DiskType -like "Raw*"} | %{$_.ScsiCanonicalName}
  
  # Set multipath to fixed (can also be RoundRobin or MostRecentlyUsed
  Get-VMHost | Get-ScsiLun | where {$RDMS -contains $_.CanonicalName} | Set-ScsiLun -MultipathPolicy "Fixed"
  

  ____________

  Blog: LucD notes

  Twitter: lucd22

• How to change the size of the hover in Spry Panel, but not the rest of the site?

  Hi guys, I need to add more tabs which means I need to reduce the size of the font of my style of H2 and its stationary state. However, when I set it is 10 pt in sprytabbedpanels2.css it remains 14 in live mode to view until I also change the parameter to 10 points in my Arrowmark.css file, which then shoves upward stationary behavior of links elsewhere in my site.

  Is there a way to set the hover in the stylesheet of tabbed panels and will not affect the rest of the site? Or I do something wrong?

  My site is www.wakatipucollection.co.nz/wholesale

  Thanks in advance for the help.

  JO

  Hi Jo.

  Watch out, I'm not an expert, but in my way of thinking, your CSS Spry needs link Pseudo-classes to specify a special font size so that links in your tabs. Normal size attributes H2 or the police has no effect on the text which is a link.

  This may look like

  . TabbedPanelsTabHover a: link {}

  do-size: 9px;

  }

  . TabbedPanelsTabHover a: visited {}

  do-size: 9px;

  }

  . TabbedPanelsTabHover a: hover {}

  do-size: 9px;

  }

  . TabbedPanelsTabHover a: active {}

  do-size: 9px;

  }

  You have time to try it?

• How to change the SGA and PGA in 10g r2 RAC

  Hello
  
  How to change the SGA and PGA in 10g r2 RAC, its Linux.

  Hello

  Here's the way I followed to change the SGA and PGA in CARS.
  --------------------------------------------------------------------------------
  Action plan to change the parameter memory in the environment(5/21/2010) of production

  Note:
  =====
  Practice must be done in the DEV/TST environment before going to Production.
  Although the procedure can be applied in the testing environment the evolution of values
  used in the test environment should be amended since number of RAM are not the
  even between the production and test servers.

  1 changes to these two parameters in one of
  the prod instance, e.g. PROD1
  ====================================================
  Connect as sysdba on sqlplus
  --------------------------

  Change:

  ALTER system set sga_target = 28G scope = spfile sid ='* ';

  Change:

  ALTER system set pga_aggregate_target = 4G scope = spfile sid ='* ';

  SQL > alter system set pga_aggregate_target = 4G scope = both;
  SQL > show parameter pga_aggregate_target;
  -should see the number altered on both instances

  Change:

  SQL > alter system set sga_max_size = 28G scope = spfile sid ='* ';

  SQL > alter system set sga_max_size = 28G scope = spfile;

  SQL > alter system set sga_target = 28G scope = spfile;

  3 stop PROD database (two instances must stop)

  $> srvctl stop database d PROD
  $>. / $ ORA_CRS_HOME/bin/crs_stat - to check the status of the database

  4. establish the PROD database (two Forum should be high)

  $> srvctl START database-d PROD
  $>. / $ ORA_CRS_HOME/bin/crs_stat - to check the status of the database

  connection in both cases as sysdba to check
  --------------------------------------------

  SQL > show parameter pga_aggregate_target
            
  SQL > show parameter sga_max_size
  -should see the number of change always there in both cases
  -According to step 1

  -After confirmation above two parameters are changed on both instances.
  -then make the syntax below in a case

  (5) check that everything is ok

• Change the location of the folder images/i /. Not the alias

  Hei, is possible to change the parameter is used during installation to something else? without having to reinstall?
  a few versions on the same server, is needed was already in use.
  
  Simon

  Hello

  You can change the prefix of image with reset_image_prefix.sql script that you can find files of Apex facility.
  You must run the script as SYS

  Kind regards
  Jari

  Published by: jarola 7 October 2010 21:48

• How to change the setting of Application Def - status to build to Run/construction

  Hello
  
  I made the following changes to a test application.
  
  Application-> definition

  Availability
      Build Status -> Run and Build Application (old value)
                      Run Application Only (new value)

  Because soon, I made the change above, now I am not able to change the application.
  following message is displayed when I click on the application

  This application is installed but not editable.

  How can any idea, I change the parameter back to Run and Application to build
  
  Thank you.
  Deepak
  
  Published by: Deepak_J on January 27, 2010 15:40

  Hello

  You need to privilege admin workspace to do
  Home > Administration > manage Services > Manage Build Application State

  Or instance admin can also change

  BR, Jari

• Dynamically change the path of the report

  Is it possible to dynamically change the path where reports are saved. TestStand 4.1.1

  Glennjammin,

  You can set a path to the specific report for any sequence that you run via the entry points of process model using the reminder of your sequence ReportOptions. It will allow you to change the current settings in the Options report (including the path) for the execution of this sequence. This allows each of your sequences have unique report options.

  If I understand your question, you want to do is exactly what is meant recall ReportOptions.

  -Jack