Problems for existing VM after you change the parameter VT PowerEdge 2950?

Similar Questions

• After you change the raw file in CS6, jpeg looks dull and has weird tinge to it. I tried all color adjustments, but the result is the same throughout, jpegs of LR5 and 13 elements looks nice and consistent. How can I fix it?

  After you change the raw file in CS6, jpeg looks dull and has weird tinge to it. I tried all color adjustments, but the result is the same throughout, jpegs of LR5 and 13 elements looks nice and consistent. How can I fix it?

  Make sure the jpg has embedded sRGB profile.

  In what application you view jpg files?

  The symptoms you describe are typical of images with Adobe RGB or ProPhoto read in an application that does not support color management.

• Problem with HP photosmart more B210a CN216B of printer after you changed the cartridge

  Anyone know why the ink can not come through when I install a new ink cartridge?  I changed the that many times before, but it does not print.  I should shake the cartridge, moisten the place where the ink comes out, clean the print head and if so, how?  Any other suggestions?  Thank you

  Hello

  Click here for the steps to install a cartridge.

  If you did above correctly and the problem persists, perform the below mentioned steps...

  On the printer, press the Setup > TOOLS > CLEAN printhead

  Note: You may need to perform the steps mentioned above for 2 - 3 times.

  Now try to print, it should work.

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as a accepted Solution!
  See a great post? Give a Kudos!
  I work for HP

• I have a problem with the connection to the computer after you change the user name.

  Original title: HELP

  I changed the username on my laptop and it is not letting me log

  I changed the username on my laptop and it is not letting me log

  Here you go:

  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your Windows 7 repair CD.
  3. Press a key when prompted to boot from the DVD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Configure Windows to a point before you have changed the user name.
  8. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key. This will save you a lot of trouble.

• 500-internal Server Error - after you change the user public apex

  Hello

  I executed change order use to change the password for apex_public_user new password but he beat Apex earpiece and entire work of workspace cant Apex now, how can I solve this problem?

  Apex 4.2.4,

  Thank you.

  Tony,

  When I run the apex.war file and specify the same values as before / previous samples below will suffice that or ive to modify other files after that because we already have existing environment with application developed, but I don't want anything an impact?

  java-jar apex.war of installation

  May 1, 2014 11:36:03 oracle.dbtools.common.config.file.ConfigurationFolder logConfigFolder

  INFO: Using the configuration file: / u01/app/oracle/apex_listener/apex

  Enter the name of the server database [localhost]:linux03.vbox

  Enter the database listening port [1521]: 1521

  Enter 1 to specify the database service name, or 2 to specify the SID database [1]: 1

  Enter the database service name: snap11g

  Enter the database user name [APEX_PUBLIC_USER]: APEX_PUBLIC_USER

  Enter the password for the database for APEX_PUBLIC_USER:password1

  Confirm the password:

  Enter 1 to enter passwords for users of database Services RESTful (APEX_LISTENER, APEX_REST_PUBLIC_USER), 2 to use the same password that you used for the APEX_PUBLIC_USER, or 3 to skip this step [1]: 2

  Update may 1, 2014 11:37:12 oracle.dbtools.common.config.file.ConfigurationFiles

  INFO: update of configurations: by default, apex, apex_al, apex_rt

  Thank you.

• Bootcamp (Win10) has not started after you changed the partition and updated at El Cap.

  I have a MacBook Pro (retina, 15 inches, end of 2013), 2 GHz Intel Core i7 with 8 GB of Ram.

  I had 2 system installed, Win 10 + Yosemite from the windows of beginning and the use of most of the time.

  Yesterday, I ran out of disk space and passed the partition in OS X with disk utility.

  While I changed the partition and I also upgraded to the El Cap.

  After all, I can't start by winning 10 more, although I could see my windows in the startup disk Control Panel.

  I checked some thread here and mess with command autour terminal, but nothing has worked for me.

  Here is the result of diskutil:

  Jerbins-MacBook-Pro: ~ the jerbinyuan list $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 251,0 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh HD 70.1 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft data base BART 30.0 GB disk0s4

  5: Microsoft database HOMER 150,0 GB disk0s5

  Jerbins-MacBook-Pro: ~ list of cs jerbinyuan$ diskutil

  No logical volume group CoreStorage found

  Jerbins-MacBook-Pro: ~ jerbinyuan$ sudo TPG - vv - r show/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 251000193024; SectorSize = 512; blocks = 490234752

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 490234751

  start index size summary

  0 1 MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 136992184 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  137401824 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  768 138671360

  138672128 58595328 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  197267456 292966400 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  490233856 863

  490234719 32 table dry GPT

  490234751 1 dry GPT header

  Jerbins-MacBook-Pro: ~ jerbinyuan$ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 30515/255/63 [490234752 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639] < unknown ID >

  2: AF 1023 254 63 - 1023 254 63 [409640-136992184] HFS +.

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [137401824-1269536]

  4: 0 b 1023 254 63-1023 254 63 [138672128-58595328] Win95 FAT-32

  Jerbins-MacBook-Pro: ~ jerbinyuan$ sudo dd if = / dev/rdisk0s4 account = 1 2 >/dev/null | hexdump - C

  00000000 2nd eb 58 90 42 53 44 20 20 34 34 00 02 20 20 00 | X.BSD 4.4...  .|

  00000010 02 00 00 00 00 00 00 20 00 f8 ff 00 00 f8 43 08 |... C. |

  18 00 00000020 7th e0 03 37 00 00 00 00 00 00 02 00 00 00 |... ~... 7..........|

  00000030 01 06 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |... |

  00000040 80 00 29 11 14 2f 2 a 42 41 52 54 20 20 20 20 20 |..) ... / * BART |

  00000050 20 20 46 41 54 33 32 20 20 20 31 c0 d0 bc 8F fa |  FAT32. 1... |

  00000060 00 7 c fb 8th d8 e8 00 00 83 19 bb 07 00 fc 5th c6 | | ......^.......|

  00000070 c0 ac 84 74 b4 06 0e cd 10 eb 30 cd 16 cd e4 f5 |... t... 0....|

  00000080 19 0D 0a 4th 6f 6F 2d 73 79 73 74 65 6 d 20 64 69 |... Nonsystem di |

  00000090 73 6B 0D 0 a 50 72 65 73 73 20 61 79 20 6 6 b 65 | SK... Press any ke |

  000000a 0 79 20 74 6f 20 72 65 62 6f 6f 74 0D 0 a 00 00 00 | is reboot... |

  000000b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |... |

  *

  000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |... U. |

  00000200

  Jerbins-MacBook-Pro: ~ jerbinyuan$ diskutil info/dev/disk0s5

  Identifier of the instrument: disk0s5

  Device node: / dev/disk0s5

  Set: No.

  Part of the whole: disk0

  Device / media name: BOOTCAMP

  Volume name: HOMER

  Gendarmerie: Yes

  Mount point: / Volumes/HOMER

  Personality of file system: NTFS

  Type (Bundle): ntfs

  Name (Visible to the user): Windows NT (NTFS) file system

  Partition type: Microsoft Basic Data

  Operating system can be installed: No.

  Media type: generic

  Protocol: PCI

  Smart: checked

  Volume UUID: 4EC75B8E-02A8-4B26-B7F3-5EA9D0A47FA9

  Disk / Partition UUID: 776C43C1-7E4C-4997-BDF5-A91FD406DEBD

  Total size: 150.0 GB (149998796800 Bytes) (exactly 292966400 512-Byte-units)

  Amount of free space: 18.5 GB (18479718400 Bytes) (exactly 36093200 512-Byte-units)

  Device block size: 512 bytes

  Allocation block size: 4096 bytes

  Support read-only: No.

  Volume read-only: Yes

  Location of the device: internal

  Removable media: no

  Solid State: Yes

  Thanks for help.

  Please follow the steps described in [help] can not boot Windows (8.1) after partition resizing .

• Cannot connect online after you change the settings system locale

  Hello

  Right now I have my locale Japanese system, it was originally English (United States). I can connect to the internet just fine until I have change the local back to English. Once I've got change for English I can't seem to connect online. I tried all the steps to fix the internet connection, but nothing helped.  However, if I set the locale Japanese system once again, my connection works fine as if there was nothing wrong with it in the first place.

  I must be able to connect with the English locale, so if anyone has any suggestions, I'd be very happy.

  Hello

  If connection involved any kind of ID / password etc you have to type in (or it is saved in the cache/shape) you will have to redo, or clear the cache.

  Language change can alter the charchters game and produce grabled id/pw and other identification information.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• What should I do on vCenter vSphere Web Client after you change the host root password?

  Hello

  When we implemented vCenter our Organization, we used a regular password to the account 'root' on each ESXi host.

  So, I installed vCenter and added the hosts on it to manage.

  When I added them, they've asked for the root password power connect.

  Ok. Everything was fine.

  Now, we want to change the password to root for each ESXi host.

  My question is: what should I do to make sure that vCenter will always be able to connect to the ESXi hosts, because the account used to connect the first time change his password?

  My question is: what should I do to make sure that vCenter will always be able to connect to the ESXi hosts, because the account used to connect the first time change his password?

  Nothing, after the host is added to vCenter, a user named vpxuser is created automatically on the ESXi host and vCenter uses this user to connect and manage the host.

• How to make a VB script on the computer after you change the files?

  Original title: HI! I have to run a VBscript on windows7 as modfying user (not administrator) files in c:\program files\mycompany. Is this possible?

  It works to disable the UAC. There is no way to let him work with UAC on? (Perhaps change somehow permissions files?)

  You have two options:

  • Turn off UAC (not recommended)
  • Change the script so that it generates a UAC challenge (to which the user must respond with an admin account & password).

• Satellite Pro T130 - problems in sleep mode after you install the update wireless

  After installing the 3G modem & updates on day of Wireless manager from 29 September, my laptop began to have trouble waking sleep mode. Most of the time I had to hard stop. I solved currently the changing options issued for the "sleep mode" in the Panel, for the most part by turning off the advanced features (hybrid sleep, sleep, sleep network adapters usb). However, I want to solve the problem no doubt, as the current options require more time to enter the mode 'sleep'.

  My laptop is a Toshiba Satellite Pro T130 running under Windows 7 64-bit.

  Please help us :-)

  You have installed the updates recommended by Tempro?
  You can send us you have installed versions?

  I assume that with the old versions you didn t have this problem?

• After you change the registration of my system, my internet connection is defective

  original title: limited internet access

  After the removal of elements of a program in regedit my computer was badly messed up:
  My comp can still connect wirelessly, but when I actually open firefox or any internet browser / program that requires internet connectivity, it does not work.

  I have also received various error messages including: host process for windows services stopped working and was closed.

  Then, I checked my event viewer and found 3 errors or if different:

  Unfortunately the model w / errors like I said has no internet connection, so I can't copy and paste, I'll try to describe every better prob I can w / words less:

  problem 1: (this problem occurring); StarCraft II stopped interacting w / windows
  problem 2: the system failed to initialize the name cache: error 0x80072af9
  problem 3: failing application: svchost.exe_MpsSvc
  and then the 2 and 3 start probs crop up a lot.

  I tried one suggestion: go to the command prompt and type sfc/scannow
  and he has found no problem.

  Please help, thanks a lot!

  Hello

  the computer you are using to find this network adapter

  go on faulty computer manufacturer's website and search for a driver and software download section

  keys to your look of defective computer model for the latest drivers, then download and save on the desktop or wherever you want on this computer you are on

  Copy the drivers on a flash drive and then transfer them to the other computer and install them

• Re: Creative cloud problem on new Mac after you use the Migration Wizard.

  It is a terrible response.  I've migrated three days ago and am still stuck in a never-ending cycle of errors trying to get CC to function on my brand new MacBook pro.

  Thanks for your follow-up.  I found myself on an online chat that guided me through a process to solve my problems.  The most common error was on the CC Apps page, where I have been informed a download error, with instructions to contact technical support or to download Creative Cloud.  It seemed that I needed a clean uninstall of CC, but whenever I tried to do, I received the message "CC uninstalled with some errors.  It's frustrating, because I was in need of a clean uninstall to reinstall, but I couldn't get a clean uninstall successfully.

  I would add that some best solution from Adobe seems to be necessary for users who migrate between Macs.  I was quite careful to follow the instructions from Apple, including the update of apps installed before the migration.  I was expecting some problems during this migration, but honestly, the only problem I had was with Adobe CC.

  In case this is useful with future users, here are the instructions of Nirvan in Adobe support that finally solved my problems:

  Mudassir: Close the creative Cloud Desktop application.

  Mudassir: Please open a Finder window, click go > go to folder.

  Mudassir:, and then type as ~/Library/Application Support / and press ENTER.

  Mudassir:, Please rename the folder Adobe as Adobe_old

  Mudassir: Now open the folder search to spend once again, in this type/library/application support / this time and then click OK.

  Mudassir: Notice that this time it's just/library and the ~ symbol is not included.

  Mudassir: Now, rename new folder Adobe in Adobe_old

  Mudassir: Now open the finder window and press it command + shift + U key.

  Mudassir: It will open the Utilities folder, then remove the Adobe Application Manager and cloud file Adobe Creative.

  Mudassir: Please now open utilities activity monitor.

  Mudassir: Then find below process and end them one by one, if they are present:

  Mudassir: 1 cloud creative

  Mudassir: 2 CoreSync

  Mudassir: 3 CCLibrary

  Mudassir: 4 Office Adobe services

  Mudassir: 5 broker IPC Adobe

  Mudassir: 6 demon Adobe Crash

  Mudassir: You can complete the AdobeUpdateDeamon as well.

  John McGrann: Is not smoking. I should try to force quit?

  Mudassir: Yes, you can try to force quit.

  Mudassir: If it does not, please ignore it. After awhile, it will automatically timeout.

  Mudassir: After that, please download and install Creative Cloud Desktop application using the link below:

  Mudassir: http://creative.adobe.com/products/creative-cloud/

  Mudassir: Please click on applications.

  Mudassir: Also, you can remove the folders that we have renamed as Adobe_old under the places below:

  Mudassir: 1. ~/Library/Application Support /.

  Mudassir: 2 / Library/Application Support /.

  Thanks for your follow-up, if - I appreciate it.

• error code when sent for test printing after you install the new printer on windows 8

  Installed a panasonic KX-P1121E printer on windows 8. I got an error code when sending for printing of the test. And not able to print. Help, please.

  Hello

  Please provide more information for me to better understand the issue.

  1. how the printer is connected to the computer? Is it wireless or wired?

  2 do you have updated printer drivers?

  3. What is the full error message you get when you try to print?

  These steps will help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

  Method 1: check if the printer is correctly installed.

  You can check the link for more information about how to install a printer.

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows-8/install-a-printer

  Method 2: you can check the link for the troubleshooting steps.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  You can check the link to download the drivers.

  http://Panasonic.NET/PCC/products/printer/windows_compliance/windows_8.html

  If please get back to us and let us know if this helps to resolve the issue.

• Configure the application server after you change the database

  Dear all,

  We use ORACLE EBS R.12.1.2. Database: 11.1.0.7. 2 RedHat linux servers.

  We are validating failover scenarios keep oracle database data.

  Scenarios is that; We fail on the primary database and primary database role has opted for sleep.

  Should what changes we make on the Application Server?

  Should we change configuration of application server to connect to the new database (name, address of db server... etc). and how?

  Thanks in advance,

  Shareef

  PL see Section 6 in MOS Doc 1545920.1

• Unable to connect to ESXi via vSphere Client after you change the setting LAN card

  Dear friends,

  I changed my setting of the NIC (from 100 M to 1000 M) via VMware vSphere Client. And now I can't connect to my server ESXi. Because I can not connect to the ESXi server, the network card user interface of the parameters provided by vSphere client is not available. How can I recover it? Thank you if someone could help it.

  Welcome to the vmware forum!

  Try this

  [root@server root] # esxcfg-NICS-s-100 d full vmnic0

  Of

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1004089