Probook HP 4430: battery test is not

Similar Questions

• Looks like I need a new battery (it does not load and it's like 8 years). Is it possible to test it before you go out and buy a new paste?

  I tried a couple of things I read everything, but the battery still does not charge on my dell inspiron E1505. For a while if I have figited with the charger, it would begin to load. I ordered a charger because plastic has been slightly cracked and waiting to happen. Other than replacing the battery or take it to see if something is wrong with the system cpu load, is there a way to tell, for sure, if it's the battery?  Wow! Just read the comments of the batteries Dell (fairer last warranty til is complete). Guess I should be Grateful he lasts that long.

  At the age of eight years, almost certainly the battery is dead and needs to be replaced.

  "verymuchnotatechie" wrote in the new message: * e-mail address is removed from the privacy... *

  I tried a couple of things I read everything, but the battery still does not charge on my dell inspiron E1505. For a while if I have figited with the charger, it would begin to load. I ordered a charger because plastic has been slightly cracked and waiting to happen. Other than replacing the battery or take it to see if something is wrong with the system cpu load, is there a way to tell, for sure, if it's the battery? Wow! Just read the comments of the batteries Dell (fairer last warranty til is complete). Guess I should be Grateful he lasts that long.

• Battery plugged in, not supported

  It just happened the other night. The battery is connected, but not charge. I did the whole disconnect AC, stop, take out the battery, etc. went to Device Manager, the whole 9 yards. When I do a battery HP battery test out as well. I don't know what is the problem and why it does not work. I got it for less than 2 months (HP Pavilion dm1-4142nr).

  Good morning dm1zalex,

  I regret that you have determined, it is the motherboard and need repair.  I suggest you contact HP support for assistance.

  If you want to test the card just to rule out it here's an ink to help you.  Using and testing the power adapter AC.

  Please call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number Plan of the Technical Support site .

• Tecra R850, battery "plugged in, not charging".

  Hello
  I'd appreciate some thoughts on the problem.

  The problem:
  The battery is not charged. The icon in the status bar indicates that the battery is "connected" but that it is 'not charging' and 'remember to change your battery.
  Something similar to:
  https://BD23.HTTPS.CDN.SoftLayer.NET/80BD23/142.4.51.106/images/consider-replacing-your-battery.PNG
  In addition, the battery charge indicator is off

  What happened:
  I was using the computer on battery power. During use, the message appeared that the battery is critical 3% and computer suddenly stop (or went to sleep/hibernate). It is possible that the battery was empty, since I was not charged for 2 days. Which was weird, is that I do not have the message that the battery is at 7%, which is normal warning that I get.
  The next day, I plugged the computer power cord started. At the start, computer called I want to boot into 'Safe Mode' or 'Normal '. I selected 'Normal '.
  Then I noticed the problem described above.

  History:
  Nothing in particular. Notebook is less than 2 years old. Battery was at six, now has dropped to about 4 hours, but had no previous problems. No power surge, does not drop the computer, etc...

  Comments:
  -L' computer works without battery, only on the power cable.
  -L' computer does not react if I put only the battery, without the cable, even if it is said that the battery has 9 percent. (he says there are 3% before the initial stop, however)
  -When I plug in the power cable, the battery charge indicator is on for 2-3 seconds (in orange) and then is off. This happens whenever I take the cable out, then in.
  -What is strange, is that every time when I disable networks wireless/mobile using "Flash Cards" and restart the computer, they are 'on '. Previously, this situation will only occur when the computer crashed, or I made him stop (holding the power button)
  -J' tried what was suggested on the forums of Toshiba:

  * 1
  §Remove cable power, battery, clean contacts, put everything back in place
  §Leave to load a few hours
  -> Indicator battery charge was not on a few hours after the

  * 2
  §Remove battery, start the computer
  §Go to the "Device Manager".
  §Uninstall method to control compatible ACPI Microsoft battery
  Computer §restart
  § ACPI Microsoft settle again
  Computer §shutdown
  §Put battery, start the computer
  -> No change, still do not charge, indicator is not lit

  * 3
  Also have interpreted 'Factory reset '.
  §Apres recovery and restart, there is no change
  §Cela time, when I turn off the networks wireless/mobile using 'Flash Cards', they remain "off" even when I reboot a computer, which was not the case prior to 'Factory reset '.
  §However, if I take the feeder and then place it in (while the computer is turned off) and then start the computer, wireless/mobile networks are once again 'on '.

  Any thoughts?

  Thank you
  Miodrag

  On the picture, information is displayed: consider replacing your battery. This means that the battery is defective somehow.

  I guess you need the battery help, another tested good original.

  I don t Jules Destrooper that there is some sort of problem since you've already tried the factory reset recovery software and computer laptop. Problems of software, this procedure should resolve any software related issues. But it was not.

• The Car battery test (automobile)

  Hello world

  I'm new to Labview test and I would like to learn how it works for example of a car battery test, test diesel Injector and other parts for the automotive industry. I would ask your suggestion where I start. My question is not directly test a car battery, but my approach is to deepen my knowledge in particular to this.

  Best regards

  Ravi

  Hello

  Little case studies for battery management systems are listed here:

  http://search.NI.com/nisearch/app/main/p/bot/no/AP/global/lang/en/PG/1/q/automotive%20battery%20test...

  Go to NI.com and use search to find articles on a particular area.

  You can also call the local representative or who should be able to give you more details about your particular case.

  Hope this informationis helpful for you.

  Ravi

• HP ProBook s 4430: password of administrator BIOS on a HP PRoBook s 4430

  Hi gentlemen

  I have 2 HP ProBook s 4430.

  N ° 1 product XU013UT #ABA

  When I try to upgrade, he asks an administrator password BIOS that we don't have this password?

  No. 2 (not yet working)

  Product XB140AV

  What is the solution for NO1 for No2 work?

  Thanks in advance for your time

  HP Business Notebooks such as Probooks or EliteBook have more strict security consumer models in fact that they do not produce "stop codes', the password cannot be derived from the serial number and the code is stored in a memory not volatile to remove the cell RTC resets not the password in this case.

  Please take a look at this link.

  http://forums.mydigitallife.info/threads/49497-HP-Probook-Elitebook-BIOS-password-reset-utility

  Please Contact HP Business Notebook of support they should be able to send a SMC.bin custom file that you can use to reset the password at startup.

• Battery test

  I have a computer laptop dv6t and laptop off when I unplugged the power cord. In the lower left corner, the battery notification was 90% +. I went to do a battery test and it came out with

  Failure ID: 60FQQM-5K76JQ-MFH141-COEPO3

  Main battery

  Battery test: failed.

  I guess I need to replace the battery, but I want to just make sure before that I do.

  Hello

  As the battery Test is a not you will need to replace the battery.

  In case your device is still covered by warranty og call HP technical support or if your device is OQ you can replace the battery yourself.

• NB550D - battery icon does not always reflect the right balance of time

  I recently bought a NB550D and I must say that, first of all, I am very happy with it. It tends to be a bit slow, but I can live with that.

  However, my problem is that the battery icon may not always reflect the right balance of time. After a full charge, it can present 9 remaining hours but after a stop and restart it will be may show 75% and the remaining 3 hours. If I stop and restart it can show 75% and remaining 6 hours

  When I started the unit I enabled him to discharge completely (by means of) three times, as suggested by the seller in the store, but quite frankly it seems not a fall of difference!

  Any advice will be appreciated.

  Concerning

  Hello

  Like Tom, battery depands of working time on the use of the laptop.
  Battery time can always change.

  In addition, I would recommend calibrating the battery to ensure best performance.
  You must charge the battery until the led would turn to green (blue) and should unload completely the battery until the cell stops automatically.
  This process must be repeated several times.

• Large capacity of Portege R100 defective battery - LED would not turn

  Hello

  I recently bought a large battery capacity Toshiba for a replacement Dock Slim for my R100, Toshiba #PA3155.

  It was sold like new on eB *, but after installing to mmy R100, the LED for battery 2' wont turn on I tried to find a faulty contact but they look all "new" battery was supplied with stock Connectror coverage, so nothing seems to be broken.

  Maybe it's the high-capacity battery is broken? It takes some time until what he charged to somestate and then it will be recognized by my R100?

  I would be happy to answer, because if the thing is broken, I need to return and do another fight on eBay... :(

  That's right, the second battery attached will not charge until one is not fully charged.

  Would be nice if you check this (just leave your machine a long day to charge two batteries) and give a short answer if kjo was right. :)

  See you soon

• Satellite A200-1UQ - battery charger does not work

  Hello

  I myself 1UQ A200 and my battery charger does not work.
  BTW Im from Türkiye.

  Can find the original, if I can't use universal battery charger?

  Thank you

  On the Toshiba site, you can search for a compatible charger and the reference number:
  http://EU.computers.Toshiba-Europe.com-online services & -online Options of PC Accessories devices & -Online Homepage Options & accessories PC

  If you have the part number, you can search with Google for this number. If you can t find something, you need to contact an authorized service provider. They can order all the parts of Toshiba.

  I hope I could help a bit.

• Lenovo Vibe X 2 AP battery Extension does not

  Hello, Lenovo,

  I should AP Lenovo Vibe X 2 of Flipkart offers launch day with extended battery for Vibe X 2, it has been so many P780.

  It works very well, but the last 15 days Vibe X 2 battery slice does not work, it is loaded, blue led lights appear but the phone does not, in my view, is not to connect to the phone.

  I went to the service center, but they are totally unaware of these accessories and its guarantee.

  Since then, I try to contact the customer for Lenovo, but without success.

  Help, please

  The (same)

• Battery indicator does not

  I just installed the update and now my battery indicator does not work. This shows only one question mark.

  mine is fine for the moment. I've updated earleir this AM.

  I did not notice one way or the other at this time here if it was ok

  seems that this blows away from the stuff and do it again after the first reboot. I would guess after some time, it will get fixed.

  It has set itself?

• Problem of 'battery installed is not supported and will not be responsible' ThinkPad X 230

  Hello

  I bought a real x battery 220 / 230 x. After I turn on the laptop, I got a message: the portable computer does not support this battery. I tried to update the bios but nothing happened. The power manager says the battery voltage, cycles, performance, battery LGC. If I unplugged the laptop, it is working so the laptop can use the battery but no charges. If it was not a genuine battery I do not see these description or should I also?

  Maybe it's not compatible with my 230 x because it compatible x 220 and the seller didn't know?

  I have attached a few photos on the problem. If someone knows anything about this please help me. Thank you.

  Link to image 1

  Link to image 2

  Comment to Moderator: Images > 50 KB (or total of > 50 KB) converted into programming. Community rules.

  Good day and welcome to the community.

  The 230 X works with the 44-series batteries, incorporating some new circuits which interacts with the x 230. As you have seen, the 230 X will run from a battery of 29-series, but it will not reload. The native X 220 with batteries series 29 series, but also works with the new series-44.

  Kind regards.

• I have laptop (hp probook 4520 s), the touchpad does not work. How can I turn it back on it?

  I have laptop (hp probook 4520 s), the touchpad does not work. How can I turn it back on it?

  This is a question which would probably respond by HP support, because it isn't really a Windows problem.

  Are you sure that the touchpad is not just turned off? Many laptops have switches, power switch, so you can rest your palm while typing one is not worry by pressing the key.

  Sometimes, there is a button above the key, a key on the Ko, or some have a stain on the pavement you waiting/tap/double tap/etc. to toggle the pad.

  If not, you could try to go on the site of HP and DOWNLOAD/reinstall assistance the SW for the touch pad.

• HP TouchSmart 300-1020: buttons HP Support Assistant diagnostic Test does not

  I have HP Support Assistant version 7.7.34.34, which - I think - is the right version for my TouchSmart from HP with Windows 7 64-bit 300-1020.

  When I try to run a diagnostic test (optical drive, USB key, sound card test, test test the printer, hard drive, keyboard, map chart, microphone, mouse), the button snaps (with mouse) for diagnosis, tests do not work.

  Basically... I click on the button for the desired... diagnostic test and nothing happens!

  Troubleshooting apparently buttons function very well... click on one and a convenience store starts.

  What can I do to "solve" the problem of Diagnostics button?  Thank you!

  You are welcome.

  Since your computer is 6 years old, I suggest that perform you a System Recovery.  I do this at least once a year because I like a computer that works like new without any problems.