change the password for root esxi and esx?

Similar Questions

• Help, I changed the password of root ESXi via powerCli, now I can not connect with the web client or the console.

  Help, I've changed the root ESXi via powerCli password, now I can not connect with the web client or the console, but I can still connect to powerCli. The command I used was;

  SE connect-VIServer esxihostname-user root - password newpasswd

  This production network btw, I have connected to each host and run the above command, these ESXi hosts are not on a domain

  y at - it something I have left out. I really appreciate any assistance that you people can provide.

  Thank you, Joe

  It is probably a longshot, but a lot of things in the land of windows is not sensitive to capital letters as Unix is.  I wonder if your new password you put through powerCLI mixed uppercase in it and if the capitalization was abandoned by command windows powerCLI Analyzer, or he interpreted as all capitals or something.   If you can still get through the powerCLI you could try to reset the password again to something simple without capitalization mixed case and if your password on ESXi strategy requires a special character, try something different than a "$", like a "_" (I find that a '_' is less likely than some other special characters (, as a '-' or a ' / ' to cause problems with analyzers.).

  Edit:

  Another thing, you can try before playing with the password once again, is to create a different username ESXi using powerCLI and see if the password ends up what you think, it should be, and if you can get with the client vsphere using it.  In this way, you can find out if there are some problems with certain characters or Cap through command powerCLI Analyzer without losing your remaining root by powerCLI access.  After some tests, you can understand what went wrong with your initial password change and may be able to fix it with less risk of losing access.  I also assume that you can not create a new username on ESXi who is able to change the root password no matter what authority give you it, otherwise, you could create a new username with PowerCLI, then connect to the client vsphere with it and change the password to root from there.

• Change the password for root to an ESXi host

  Hello

  I need help to get a script VCO that change password for root to an ESXi host.

  In PowerCLI is the Set-VMHostAccount cmdlet. I searched in VCO API... I have not found or something similar.

  I found the object of VcHostAccountSpec but seems it only works with "Host Profiles" and my licenses are Standard and Enterprise.

  http://www.VMware.com/support/Orchestrator/doc/vco_vsphere51_api/HTML/VcHostAccountSpec.html

  Any idea?

  Thanks, Roberto

  Another option would be to connect to the ESXi host with vCO plugin SSH and run the command "passwd" remotely. Haven't tried, but in theory, it should work.

  @Tim - we try to keep the compatibility of the existing whenever possible plug-ins vCO so PowerShell module should work with the latest vCO relies.

• Recently, I changed the password for the administrator and I forgot what it was.

  original title: password__ administrator

  Recently, I changed the password for the administrator and I forgot what it was. The profile of my son is set to standard, and I can't access anything whatsoever. I don't have another administrator account to change the password again. I have created a disk to reset password on the profile of my son and I'm going to change the password on the account and it will allow me to do to change the password, and then it pops up with an error, when I'm finished. I also tried to activate the net user administrator safe mode and it appears with and error 5 on that. Can someone help me please.

  Hello

  Unfortunately, it's in the code of conduct for these forums to help users to circumvent passwords and security settings. You will need to remember the password or reinstall.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• In the world, change the password for the connection properties?

  I use developer SQL to connect to several work areas and need to change the password for each of these months.

  Have a script that iterates through each of the database and changes the password.

  My problem is that I have to update all of my properties login for SQL Developer and have each connection updated to a new password.

  Short of manually changing each connection is possible for the global changes the password for these connections?

  Thank you very much

  No, but.

  There are password there lockers that allow you password auto - magically. The password is defined by the title of the window asking for the password. So if you held your passwords in 'the cloud', she would never put need up-to-date with SQL Developer.

  Is this really the same problem?

• How can I change the password for Agent DSCC on ODSEE 11.1.1.7?

  Hello

  Someone at - he met how to change the password for the DSCC Agent? I found not yet all orders that allows it.

  Mohammad

  Hello

  Sylvain, the links you give are not 11.1.1.7 for previous versions.

  There is no CLI to change the password of DSCC agent in 11.1.1.7. As agent DSCC has no data, I suggest to delete and recreate your agent by using the following path:

  • dsccreg remove-agent
  • dsccagent delete
  • create a dsccagent (use the same port as before)
  • dsccreg add agent

  No change on the servers of DS/DPS is necessary (no new registration...), if you keep the same port.

  It will be useful,

  Carole

• Anyone know how to change the password for the installation of Adobe Flash Player?

  Anyone know how to change the password for the installation of Adobe Flash Player? I have tried everything that I usually use and nothing works. My Adobe ID password works perfectly. I can't complete the installation without this, and it doesn't have a 'forgotten password' button to change it. Any help would be greatly appreciated!

  Thank you

  There is no password required for the installation of Flash Player, at least not on the side of the things Adobe.  It's probably the security of your computer, forcing you to you connect allowing the installation to occur.  Only you would know what would be the connection for this information.

• How to change the password for "admin" on the installation of Oracle Hyperion 11.1.1.3

  Hello
  
  I have installation hyperion 11.1.1.3 made with almost all possible components (HSS, Essbase, planning, FDM, etc.) on Oracle 10 g under the RDBMS.
  Security is managed by SSP for all components.
  
  Please let me what is the way to change the password for "admin"? (What is as simple as changing shared services console and refresh)
  Ask you please suggest the steps involved.
  
  Thank you
  Ankit

  Hi Pierre,.

  This is exactly how to change the password admin. connection to shared services, change the password and updating of security planning and essbase.

  See you soon,.
  Mehmet

• change the password for Weblogic9.2

  Hello
  How to change the password for Weblogic9.2?
  
  Thank you.

  The url, you need to use is one that is used to connect to your Peoplesoft application within the front-end application, until the first slash. And of course, the Web server must be running.

  Nicolas.

• Change the password for the user of IOM database

  To change the password of the database user who created and the user run the prepare_xl_db.sh. I changed the < encrypted password = "true" > "false" and changed the password in the xlconfig.xml and restarted the application server, but I can not connect. I get the error below. -What else is necessary?
  
  ERROR, October 30, 2008 09:31:56, 265, [XELLERATE. SERVER], class/method: XLJobStoreCTM/initialize some problems: error connecting to the database. Please check if DirectDB is correct in the Xellerate configuration file.
  FATAL, October 30, 2008 09:31:56, 265, [XELLERATE. PLANNER], QuartzSchedulerImpl-constructor for Exception
  org.quartz.SchedulerConfigException: failure occurred during recovery of employment. [See nested exception: org.quartz.JobPersistenceException: could not get the connection to data source 'noTXDS' DB: org.apache.commons.dbcp.SQLNestedException: cannot create PoolableConnectionFactory (ORA-01017: name of user and password invalid; connection refused)]
  ) [See nested exception: org.apache.commons.dbcp.SQLNestedException: cannot create PoolableConnectionFactory (ORA-01017: name of user and password invalid; connection refused)]
  )]]
  at org.quartz.impl.jdbcjobstore.JobStoreSupport.initialize(JobStoreSupport.java:429)
  at org.quartz.impl.jdbcjobstore.JobStoreCMT.initialize(JobStoreCMT.java:131)
  at com.thortech.xl.scheduler.core.quartz.XLJobStoreCTM.initialize (unknown Source)
  at org.quartz.impl.StdSchedulerFactory.instantiate(StdSchedulerFactory.java:753)
  at org.quartz.impl.StdSchedulerFactory.getScheduler(StdSchedulerFactory.java:885)
  at com.thortech.xl.scheduler.core.quartz.QuartzSchedulerImpl.initialize (unknown Source)
  to com.thortech.xl.scheduler.core.quartz.QuartzSchedulerImpl. < init >(Unknown Source)
  at com.thortech.xl.scheduler.core.quartz.QuartzSchedulerImpl.getSchedulerInstance (unknown Source)
  at com.thortech.xl.scheduler.core.SchedulerFactory.getScheduler (unknown Source)
  at com.thortech.xl.scheduler.deployment.webapp.SchedulerInitServlet.startScheduler (unknown Source)
  at com.thortech.xl.scheduler.deployment.webapp.SchedulerInitServlet.init (unknown Source)
  at com.evermind.server.http.HttpApplication.loadServlet(HttpApplication.java:2371)
  at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4824)
  at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4748)
  at com.evermind.server.http.HttpApplication.initPreloadServlets(HttpApplication.java:4936)
  at com.evermind.server.http.HttpApplication.initDynamic(HttpApplication.java:1145)
  to com.evermind.server.http.HttpApplication. < init > (HttpApplication.java:741)
  at com.evermind.server.ApplicationStateRunning.getHttpApplication(ApplicationStateRunning.java:414)
  at com.evermind.server.Application.getHttpApplication(Application.java:570)
  to com.evermind.server.http.HttpSite$ HttpApplicationRunTimeReference.createHttpApplicationFromReference (HttpSite.java:1987)
  to com.evermind.server.http.HttpSite$ HttpApplicationRunTimeReference. < init > (HttpSite.java:1906)
  at com.evermind.server.http.HttpSite.initApplications(HttpSite.java:643)
  at com.evermind.server.http.HttpSite.setConfig(HttpSite.java:290)
  at com.evermind.server.http.HttpServer.setSites(HttpServer.java:270)
  at com.evermind.server.http.HttpServer.setConfig(HttpServer.java:177)
  at com.evermind.server.ApplicationServer.initializeHttp(ApplicationServer.java:2493)
  at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:1042)
  at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:131)
  at java.lang.Thread.run(Thread.java:595)
  * Nested Exception (the underlying Cause).
  org.quartz.JobPersistenceException: could not get the connection to data source 'noTXDS' DB: org.apache.commons.dbcp.SQLNestedException: cannot create PoolableConnectionFactory (ORA-01017: name of user and password invalid; connection refused)
  ) [See nested exception: org.apache.commons.dbcp.SQLNestedException: cannot create PoolableConnectionFactory (ORA-01017: name of user and password invalid; connection refused)]
  )]

  During the IOM installation datasources are created to access the database.
  Then when you change the password for the database user, you must set the password in the data sources.

• Vista always forces me to change the password for the connection

  I know that Vista is old, but we have an old computer that works yet that we allow our children to use. Periodically, we have to change the password for the connection. Is there a way I can stop this?

  I know that Vista is old, but we have an old computer that works yet that we allow our children to use. Periodically, we have to change the password for the connection. Is there a way I can stop this?

  See:
  http://www.howtogeek.com/HOWTO/Windows-Vista/why-does-my-password-expire-in-Windows/

• Changed the password on Windows Live and it has changed my password:)

  OT: I'm sorry, I just got an answer that is not accurate. Windows Live and Hotmail ARE THE SAME! BECAUSE WHEN YOU CHANGE THE PASSWORD THAT IT MODIFIES THE OTHER. I was told that it is 2 different passwords?
  Hi all

  I wanted to see if Windows Live and Hotmail was the same thing, and someone told me that they are 2 different passwords and not the same thing.

  I changed the password on Windows Live and it has changed my password:)

  Thank you, Angelo

  Hi Angeloecheverra,

  The question you posted would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the support you want.
  http://windowslivehelp.com/product.aspx?ProductID=15

• need to know how to change the password for access to the computer

  I'm changing my password on the computer so that my son can not use it

  To change the password for your user account, click on Panel > user accounts > change your password . Boulder computer Maven
  Most Microsoft Valuable Professional

• First Cisco VIEW - change the password for the admin GUI of CLI

  Hello

  We had someone install an instance of VIEW with the Vmware EGG file, but it seems that they never take the GUI password (admin) during the installation phase.

  Does anyone know the process to re-run the configuration script or to change the password for the admin of the SSH session, so we are able to connect to the GUI?

  Thank you

  Andreas

  Hi Andreas,

  Sorry, that I was not able to respond until the EGG has been redeployed, however, it is possible to change the CLI from the server admin password.

  1 SSH on the server VIEW

  2 cd to/usr/local/cisco/dcm/fm/bin

  3 «./addUser.sh--help' to view the syntax of the command.

  The syntax for the addUser.sh script is «./addUser.sh .  The adduser script to add new accounts to users or change the password for the existing user accounts.

  4. to change the admin password, the command should look like this,

  «./adduser.sh admin .

  If you have forgotten the password for the database, you can find it in the file, usr/local/cisco/dcm/jboss-as.7.2.0-Final/standalone/conf/postgres.cfg.xml.  Use the 'cat /usr/local/cisco/dcm/jboss-as.7.2.0-Final/standalone/conf/postgres.cfg.xml' command to print the contents of the file to the screen.

  -Eric

• Hi, can I change the password for alloracle online in production? -example - FNDCPASS apps/apps 0 System/Manager ALLORACLE WELCOME

  Hello

  can I change the password for "alloracle" online in production? -example - FNDCPASS apps/apps 0 System/Manager ALLORACLE WELCOME

  version: oracle EBS 12.1.3.

  Concerning

  Kumaran S

  Hello Kumaran,

  For security reasons, I would not be advised to do.

  If it's not prod, some customers follow which. But it's sold to the customer.

  However, for the production, it is not recommended.

  Hope this helps!

  Kind regards

  Hugues