Change the path information for ESX ESXi hosts to access

Similar Questions

• Changing the DNS server for ESX hosts?

  Our network administrator will change the IP address of the DNS server.  In this way, we will change those corresponding to ESX hosts.

  We would like to know

  (1) can we change the DNS server on execution of the ESX hosts without going into maintenance mode?

  (2) under what circumstances the ESX host will do use DNS servers?

  (3) memory, we should add all the IP addresses of ESX host in the hosts file in the Service Console, where is this hosts file located at?

  Thank you

  Tony,

  Use "service network restart" command to restart the network service

  Do not forget also that...

  Very dependent on DNS HA, HA will not work without the correct DNS configuration. The servers ESX and vCenter server must be able to resolve the name (FQDN full) / IPs in both feel to get a working HA.

• I don't have my old alternative messages... and I need to change the security information for the code

  Hello. Hotmail sent me a 'code' to an old alternate email that I have no more. I had to give an additional email to renovate my security info. Now I can't access my password, security questions and the old email to change and receive the code which allows me to continue with my account. Help me please. I don't know if I have to wait 30 days... and my account will be ok... I've read far too many questions... but I can't. You will find the answer. Thank you

  Hello

  Given that the problem is related to the Microsoft account. I suggest you to send your request to new Microsoft Outlook.com community forum:

  http://answers.Microsoft.com/en-us/outlook_com

  Alternatively, you can contact support for Windows Live ID in order to make changes to your Microsoft account.

  http://Windows.Microsoft.com/en-us/Windows-Live/ID-support

  Thanks and greetings

  John

• Need to change the connection information for Windows 8 - can not connect to computer because associate login hotmail account has been deleted

  Long story short - the email address associated with my Windows 8, log in to my desktop computer has been deleted and now I can't connect to my computer at all.  Is it possible to access my computer without having to take my computer to a technician to reinstall Windows 8?  Any help is appreciated, thanks!

  Hello

  I understand that you have removed the Hotmail account and Windows does not let you connect as a result of this deletion. Unfortunately, there is no other way to enter to account without using the password (if the account is active).

  You can see the Microsoft Account self-help recovery article and check.

  Recover your account

  If no help, I would recommend that you post your query in Windows Live ID support for assistance.

• Change the path to the Round Robin of the newest storage used

  Dear Experts,

  For one of our guests (on two hosts total), which is presented with two data warehouses:

  -Storage 1 (works with RoundRobin vmware)

  -Storage 2 (works with most recent used vmware)

  I need to know if I can change it so that things work and there are two VM in this data store 'storage 2'.

  All the foregoing gave two data warehouses are working with (Round Robin vmware) with host 2nd in our environment

  Please notify

  Just did on one of the used data stores. No problems.

  Just follow this Article

  VMware KB: Changing the path information for ESX ESXi hosts to access

• Should we have the additional license for managing ESXi4 host?

  We have operated vSphere 4.0 hosts for a period of time.  We will implement ESX4i host in the near future.  We would like to confirm that we can use the existing vCenter Server for the management of the ESX4i host without additional costs.

  In addition, we currently Support Gold for ESX hosts, do we need to purchase additional ESXi support?  Is this host or CPU?

  Your opinion is requested.

  Thank you

  Post edited by: TonyJK

  you have 2 licenses. (you can find them when you connect with the customer for the vcenter tab in admin, licenses)

  1 for the vcenter itself

  1 for esx/esxi hosts.

  So yes, if your license allows 12 processors and you have already used 10 cpu, you can add 1 host more (esx or esxi) with 2 cpu.

  When you delete an esx server, you can of course add another esxi host.

• popular error; An error occurred when opening a virtual disk. Make sure that the converter server and source running machines have network access to the ESX/ESXi hosts source and destination.

  Once again; same problem, others have encountered but nothing seems to work.

  An error occurred when opening a virtual disk. Make sure that the converter server and source running machines have network access to the ESX/ESXi hosts source and destination.

  We have 1 physical servers, we need to see. Here is the environment. All 3 separated location, 3 all firewall separated

  1 physical servers

  -Internal IP address; 172.16.160.21
  -FARM Firewall

  vCenter Server

  -Internal IP address; 172.16.1.85

  -Local Office (ALX)

  Location of destination (ESXi host):

  -Internal IP address; 172.16.153.20

  -Firewall ROOMMATE

  
  Already completed:

  VMware KB: disable SSL on VMware Converter Standalone 5.x encryption   SSL disabled in converter-worker

  Firewall are open / Tunnel is open throughout the environment.

  I have attached the logs.

  Thank you very much

  POCEH; Thanks for the reply. But I wouldn't be pulling my gray hair if I knew what the problem was. I understand that there not for the peer but why...?

• Migrate the replication for patching ESXi host device

  Hi guys,.
  

  
  

  I'm trying to Storage vMotion/migrate vSphere replication device to different host for ESXi patches. I get the following message
  
  "This entity is managed by VR management solution. It is not recommended to edit it directly. Instead use the GPMC for the solution if you want to make changes. You want to proceed. "
  
  I use vSpere replication without the SRM device. What is the best approach to upgrade ESXi host where there is replication Appliacce. Should I just stop then move the unit, or is it possible to move it while it is running?

  
  

  Kind regards

  
  

  MQ
  
  

  Hello

  Moving the unit via the technology Vmware is perfectly fine.

  The message/warning you receive is just to warn you that this VM is a critic and you must be careful. The same message if you invoke the power out of this machine.

  Kind regards

  -Martin

• Converter does not have "an error occurred when opening a virtual disk. Verify that the Converter server and source running machines have network access to the ESX/ESXi hosts source and destination. »

  Hi all

  I'm having some trouble converting server physical windows using autonomous vConverter 5.5.

  error message:

  "An error occurred when opening a virtual disk. Verify that the Converter server and source running machines have network access to the ESX/ESXi hosts source and destination. "

  I have attached the bundle newspapers. Please notify.

  See you soon...

  Your error is:

  2014-11 - 04T 18: 27:27.587 - 08:00 [01236 info "Default"] GetManagedDiskName: Get disklib file name as vpxa-nfcssl: / / [a0110-vmgt70-001] WIN-MOVRCVCSITG/WIN-MOVRCVCSITG.vmdk@a0110tesxhyp01.datacenter.telenorservices.com: 902! 2 b 52 87 75 03 03 ff 49-67 2f 3 a 61 76 and 00 cd e1

  2014-11 - 04T 18: 27:27.587 - 08:00 [01236 WARNING 'Default'] [, 0] NfcNewAuthdConnectionEx [NFC ERROR]: unable to connect to peer. Error: Failed to search for host for a0110tesxhyp01.datacenter.telenorservices.com server address: the requested name is valid, but no data of the requested type was found

  2014-11 - 04T 18: 27:27.587 - 08:00 [01236 info "Default"] Sysimgbase_DiskLib_OpenWithPassPhrase failed with 'NBD_ERR_NETWORK_CONNECT' (error code: 2338)

  Check the manual on the required ports.

  HTH

• Change the default options for a NEW virtual machine in ESXI 5.1

  Hello

  I am looking for a solution change the 'default' options for a new virtual machine created in ESXI 5.1

  I want to have parameters such as 'cpu/memory HOT-add' default to enabled instead of disabled.

  There may be more options to change to a new virtual machine.

  All those who have an option to change the 'default' options for new virtual machines?

  THX

  You can change the/etc/vmware/config of vSphere host file and add the lines mem.hotadd = 'TRUE' and vcpu.hotadd = 'TRUE '.
  The settings then apply to any VM on this host when virtual machines are turned on...

  I just tried this on a 5.1 ESXi host and it seems to work perfectly...

  / Rubeck

• Change the path for every 24 hours

  I need a code to vi to change the path for each new file created. The file in the path will be a new file. Please please answer me.i don has an idea.

  The pseudo-code for this is

  IF (NEW FILE IS AVAILABLE IN THE FOLDER)

  {

  PERFORM THE CALCULATION IN THE OLD FILE;

  CHANGE THE OLD FILE INTO THE NEW FILE;

  }

  ON THE OTHER

  {

  LOCATE THE NEW FILE;

  }

  Please, please make the answer.

  As well as the tutorials in the link rules mentioned, Sam notes where it says don't not to communicate directly with users.

  You're going to have these, I think:

  

  "Give me six hours to chop down a tree and I will spend the first four sharpening the axe.  -Abraham Lincoln

  Here are some free training focused mainly on LabVIEW and hardware tools to help get started.

  Training center of NOR

  NEITHER start-up

  -Hardware Basics

  -Guide of MyRIO project Essentials (a lot of good simple circuits with links to youtube events)

  -LabVEW databases

  -DAQ Application tutorials

  -CRIO Developer's guide

  Learning OR training videos resources

  Introduction to LabVIEW for 3 hours

  Introduction to LabVIEW for 6 hours
  Paced self-study for students
  Self Paced Training beginner to advanced, required SSP
  LabVIEW training Wiki

• Just changed my account information for payment, but payment results in a week, enough time for the new payment will be held for the new account?

  Just changed my account information for payment, but payment results in a week, enough time for the new payment will be held for the new account?

  HI Lucas,.

  I see that you have tried to change the billing details, but they were not properly updated.

  Please get in touch with the customer: -.

  Contact the customer service

• Should the RAM for an ESXi host replaced the same ones remaining?

  Hello

  We are running a cluster of servers ESXi 5.1 - 2 of them are Xeon E7440 2.4 GHz (64 GB of RAM) and 1 of them is Xeon X 5460 3.16 GHz (32 GB of RAM).

  Currently, the use of the memory of all three ESXi hosts are about 60%.

  We will replace the Xeon X 5460 server with a new physical server.  We would like to ask for your opinion how much RAM you must order (my manager of door on the cost of the new server).

  Thank you

  Hi again Tony,

  1. No, it is not high at all. You should begin to worry about this, after reaching approximately 85-90%.
  2. My short experience with clusters of memory-unbalanced, adding that more memory would be a lot like the DRS manages memory locations & 'kindness host' in the right direction, but I'm not really sure how that would turn out in the long term. If you decide to present more memory to your server, it would be possible to upgrade the other two guests sooner than later
  3. Yes, ask the seller would be the right thing to do. Please note that you will need to put in place an enhanced vMotion to conform to your next "older" CPU then, because you'll have something other than X 5460. I guess you'll have to "intensify" a generation or two, depending on what you have found.

• Impossible to change the path for the shared virtual machines

  Hello

  as long as user root, in the Preferences menu, shared, VMs when I change the location and

  (1) push apply 1 time, the path is created in the right place on the hard drive but when I want to share a virtual machine and move toward this path, the default path is the default: / var/lib/vmware... not the one created by the menu setting.

  Cannot change the location for the shared virtual machines.

  (2) push apply several times: odd error menu

  

  OS: Linux mandriva 64

  Any ideas?  Is this a way to manually change the path in a config file?

  Best respect

  Out of work station - stop pass.
  Then edit datastores.xml - don't know where the files on Linux - I expect it be in/etc/vmware/hostd or something like that

• How to change the path to the use of the esx command line logic unit number

  Hi friends,

  We want to change the path to the lun, the scripts are there?

  Thank you.

  Check if http://www.vmware.com/support/developer/vcli/vcli41/doc/reference/vicfg-mpath.html nigra

  If you have found this information useful, please consider awarding points to 'Correct' or 'Useful'*.