Change the path of the DB

Similar Questions

• Change the path of the files system such as 'Music '.

  There is not a lot of space on the internal hard drive SSD in my Macbook.

  For this purpose, I'd like to keep some data types with a huge volume to another location, for example on an SD card in the slot.

  For example, I want to store my music files on the SD card instead on the internal SSD flash drive.

  Of course, I don't want to see the empty folder "~ / music" in my file structure.

  Question:
  Can I change the path ' ~ / music ' to ' / my-sd-card/Music?

  Thanks for your help.

  If you completely destroy the music folder in your startup volume/users/music folder (or the folder documents) there is a possibility another application can go get it or try to add files to it, then you should try and keep intact even if you do not plan to use or put the files into it.

  You can send a request to look in another folder for music.

  for example my iTunes on my El Capitan boot drive is mapped to watch my music in my folder shared user of Yosemite, and on another mac, it's on an external hard drive in a folder called 'music '.

  So what application do you need to do this in?

  In the case of iTunes, you can redirect the folder from the Advanced section in the iTunes preferences by clicking on 'change... '. "and navigate to the new location.

  record music from my boot drive is intact, but there is no files inside.

  

• How to change the download path or location in android fire fox

  Please give me answer, I'm not able to download any file

  When you try to download a file, you get an error message?

  By default, Firefox for Android uses the Android downloads folder because its default download location. You can change this as follows.

  Change the download location on Firefox for Android, please visit the topic: configuration preferences editor. You need to change two different settings to make this work.

  First, you must know the path of the folder to use. An application like ES File Explorer file manager will be useful if you do not have a file manager.

  (1) open a new tab to Subject: config (type about: config the Awesomebar and hit the arrow go or tap Enter).

  You can bookmark it for easy future access.

  (2) in the search box, type down and press enter

  3 scroll to browser.download.folderList and tap on modify, then change the value from 1 to 2 (from 'by default always' to the 'last used folder'). The change should appear after a few seconds.

  (3) scroll back up and press the big button "+" to the left of the search box to add a new parameter

  (A) the name of the preference should be browser.download.dir (this option stores the last used directory)

  (B) on the right side, type Boolean and in the popup, change it to a String

  (C) the value is based on the folder you want. For example:

  /sdcard/FxDown
  

  (D) then click on create (if you are too slow, it can erase and you will have to start)

  If you go back to your other tab and download something, it should go to the new folder.

  A little luck?

• How to change default paths in the Finder

  Hello world

  I would like to create a partition on the hard drive to separate the BONES of my personal data (documents, pictures, movies, music, etc.).

  How can I change the paths by default for Documents, Images, Photos in the Finder so that they "point" the the new structure in the other partition?

  Thanks for any idea!

  Mathieu.

  I don't know much on El Capitan. You used to be able to do with symbolic links that look like aliases, but are certainly not aliases.

  Some of these things you can do with the applications themselves. iTunes (and probably all) allow you to store media or even your entire library in a different location.

• Dynamically change the path of the report

  Is it possible to dynamically change the path where reports are saved. TestStand 4.1.1

  Glennjammin,

  You can set a path to the specific report for any sequence that you run via the entry points of process model using the reminder of your sequence ReportOptions. It will allow you to change the current settings in the Options report (including the path) for the execution of this sequence. This allows each of your sequences have unique report options.

  If I understand your question, you want to do is exactly what is meant recall ReportOptions.

  -Jack

• Change the path open the initial sequence of the operator Simple of TestStand with LabVIEW Interface

  Hello

  I use an Interface with LabVIEW TestStand operator similar to the TS IO Simple example.

  But I want to change the path when you click the button open the sequence file, I want a specific path.

  Any help is apreciated.

  Kind regards

  Daniel Coelho

  Daniel, you might be interested by this Knowledge Base:

  How can I change the default directory for the open file dialog box in TestStand?

  I searched ni.com for teststand of dialog box open the file and it was the fifth or so link.

• Programmatically change the file name and path for PDFCreator

  Hello

  I know that the creation of PDF files is a common question asked on the forum but I have yet to see someone with the same problem I encounter.  I'm following the example at http://decibel.ni.com/content/docs/DOC-4552#comment-12005.  I posted a question on this page, but write again here for the hopes of a quicker response.

  I am able to create a pdf file of the file test.txt.  However, I'm unable to change the path or file name.  No matter what I select the file is created with the name and the path set in the automatic recording of PDFCreator options.  As the file is created, the reference is correct.  It seems that the cOption call nodes do not work.  If I turn on the automatic backup in PDFcreator options, I am invited with a record as a window.  This means that my order to use AutoSave (in config Subvi) does not work.  Presumably, the autosavedirectory and the autosavefilename also do nothing.

  I am at a loss, because everything seems to be OK.  Any thoughts on what could be the problem?   (labview 8.6.1 PDFCreator 0.9)

  Hello

  Have you tried to download the latest version of PDF Creator? It seems that now it's 1.0.1. If there is a problem with the ActiveX interface, it can be solved in the latest version.

  -Zach

• Change the path of the file of the scanned Document

  Hi, can someone do that to me. I have a HP Deskjet 2515 all-in-one printer, I was wondering how to change the location of the file of the scanned photos or documents. Whenever I scanned a document, it was recorded on the forlder of my documents in the library. Please help me how this issue can be resolved.

  Hello

  To change the path of digital file, please see below.

  Open the wizard from HP printer > under Print, scan & Fax > scan a Photo or a Doc > advanced settings > Destination > under save location you select path

• is it possible to change the StationGlobals.ini path that points to TS?

  Any comment is appreciated!

  Hi Falcon,.

  If you use TS > = 4.0, you can change the Configuration of TS folder. It's StationGlobals.ini

  Configure--> StationOptions--> TAB preferences: change the path for "directory of Configuration.

  Hope this helps

  Jürgen

• all my components are grey in multisim11. Path to my configuration in the global preferences file is also grayed out, can not change the standard cfg

  all my components are grey in multisim11. Path to my configuration in the global preferences file is also grayed out, can not change the standard cfg

  Hi Escapermark,

  Take a look at these articles to the knowledge base, one should set the gray on the problem:

  http://digital.NI.com/public.nsf/allkb/609A763289E6E81D8625739F0052151F

  http://digital.NI.com/public.nsf/allkb/2719D00E36A4D53A8625721300685B3F

  http://digital.NI.com/public.nsf/allkb/B3D720348D55D0C5862575BA00560908?OpenDocument

• Change the path for every 24 hours

  I need a code to vi to change the path for each new file created. The file in the path will be a new file. Please please answer me.i don has an idea.

  The pseudo-code for this is

  IF (NEW FILE IS AVAILABLE IN THE FOLDER)

  {

  PERFORM THE CALCULATION IN THE OLD FILE;

  CHANGE THE OLD FILE INTO THE NEW FILE;

  }

  ON THE OTHER

  {

  LOCATE THE NEW FILE;

  }

  Please, please make the answer.

  As well as the tutorials in the link rules mentioned, Sam notes where it says don't not to communicate directly with users.

  You're going to have these, I think:

  

  "Give me six hours to chop down a tree and I will spend the first four sharpening the axe.  -Abraham Lincoln

  Here are some free training focused mainly on LabVIEW and hardware tools to help get started.

  Training center of NOR

  NEITHER start-up

  -Hardware Basics

  -Guide of MyRIO project Essentials (a lot of good simple circuits with links to youtube events)

  -LabVEW databases

  -DAQ Application tutorials

  -CRIO Developer's guide

  Learning OR training videos resources

  Introduction to LabVIEW for 3 hours

  Introduction to LabVIEW for 6 hours
  Paced self-study for students
  Self Paced Training beginner to advanced, required SSP
  LabVIEW training Wiki

• Change the path to the updates from microsoft updates vs. windows

  Fully updated, xp pro, ie8

  When you click Start, all programs, windows update, go to the updates of microsoft with the compatibility view

  which connection online for microsoft updates gets updates microsoft without compatibility view

  can I change the path for my start, all programs, windows updates to be updated from microsoft without view compatibiliy?

  Edit: have reinstalled os with a sp3 slipstreamed cd.

  Edit2: no sites are not listed in my compatibility view settings.

  There is no need to uninstall/reinstall MSE.

  1. open IE (only!) to Microsoft Update . Click change settings in the left pane. Scroll to the bottom of the page. To stop using Microsoft Update. Disable the Microsoft Update software and let me use Windows Update only (check).

  1B. Reboot for good measure.

  2. your shortcut on the start menu should now be updated to Windows . [1] use it (not the Tools menu pull-down option) to go to http://update.microsoft.com/windowsupdate. Assuming that it does NOT open in compatibility mode...

  3. "Flip" your source of default update appropriate Microsoft update by clicking on the option / link on the main page of Windows Update (IIRC).

  3B. reboot for good measure & test to see if the Microsoft Update shortcut on your Start menu will however open IE8 in compatibility view.

  PS: I don't have a WinXP box handy to test myself, but the last time I used the Microsoft Update shortcut on one of my client computers, it has not opened in compatibility view. As far as I know, MS may have changed something since then so YMMV.

  =============================================================
  [1] If you persevere with Windows Update as a source of update by default, MSE will always be 'auto-update' [even thought that Windows Update will offer more optional updates Defs] but will offer no updates to the ESM (e.g. new versions MSE) program or updates for MS Office, Silverlight, or Skype .

• How to change the default path for documents and settings

  How to change the default path for documents and settings

  I try to change in the registry, but the profile can create but error! had no choice to change the default path % lecteur_systeme % d: /.

  Hello

  I suggest you to download TweakUI, this could help you or get you headed in the right direction
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-XP

  Also this KB could help as well:
  http://support.Microsoft.com/kb/236621

  It will be useful.

• How can I change the path of the system permanently?

  using the path back change only lasts for the duration of the windows session.
  {Use windows vista with all upgrades so far}

  Thanks in advance.

  From the start menu open 'system '.

  Click on "advanced system settings" in the list tasks.

  On the Advanced tab of the System Properties dialog, click "Environment Variables... »

  Since the Environment Variables dialog, you can change the user (or profile) variables or variables of the system (all profiles).  Look for the variable 'path' and include the value of path you want and click ok.  NEW process (for example, a command prompt) will use the new environmental variables that you define.  Any existing process will keep existing variables until they are changed from the process or the process is completed and re-opened for re - load the new variables.

  This settings in system properties are persistent and will be maintained by reboots, sessions recorded off tension and new processes being begotten.  They are used whenever a process that uses environmental variables support.

  That you set from the command prompt by using the DOS command SET variable = value won't be resident for the duration of this process or session you mentioned in your post.

• I accidentally change the main drive d LABEL: volume 1 label D: (C :) AND IT does not FIND C:\Windows\system32\rstui.exe. How can I find this path?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages - Windows cannot find C:\Windows\system32\rstui.exe «»
  • Recent changes made to your computer: I accidentally change the main drive d LABEL: volume 1 label D: (C :) AND IT does not FIND C:\Windows\system32\rstui.exe. How can I find this path?
  • What you have already tried to fix a volume control simple back - I tried things like this before as to cause major problems. I'll do it right the first time.

  Read this tutorial carefully. Hpoefully it resolve issue you. I have no knowledge on this topic. Only offer you a tutorial of a VERY worthy site.

  How to add, change, or remove a drive letter in Vista

  http://www.Vistax64.com/tutorials/114767-drive-letter-add-change-remove.html

  t-4-2

  PS Sorry for the huge impression. A small bug in copy/paste.

• Cannot change the path to the program shortcut? Bad location targets after Regedit

  Hello.

  I hope someone is able to help. I recently bought a new PC that I decided to run Windows 7 on once more, with a personal dislike for Windows 8.

  The system is running 1 SSD for the OS and 1 HARD disk for other programs and files. Want to separate my OS from my HARD drive as much as possible, I searched these forums for a solution to allow me to place my Program Files and Program Files (x 86) on the HARD drive.

  In doing so - I found a Regedit solution which involved editing Reg keys under %systemroot%\syswow64\regedit 2 - I changed the ProgramFilesDir and ProgramFilesDir (x 86) values so that they are now pointing my F drive on my C drive.

  However, in doing so, I have found that although the programs install okay--when a shortcut is generated on the desktop and in the start menu, the path does not match the location of the files and rather oriented towards the drive C. I tried to go into the properties of the file itself and editing shortcuts so that they point to drive F - however support apply and okay - the path back to its previous C disk State , despite it clearly edition there are moments.

  Anyone had similar? Is there a solution I'm missing at this point? I'd love to hear it!

  Hello

  You can also publish this issue in Windows 7 IT Pro TechNet Forums: http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w7itpro

  Thank you.