Change the sample DAQmx and Terminal configuration mode

Similar Questions

• Programmatically change the sampling for AO / DO

  Hello

  I'm doing some AO / DO with a few tips, PXI, including a series PXI-6221 Mr., I wonder if it is possible to progammatically change the sampling frequency at a certain point in time.

  After awhile my program between a low-maintenance lifestyle and he needs go to exit rates very fast just to maintain some default values. I thought that the best way to proceed would be to change the sampling at very low frequency so the demand on the computer falls down, but the default waveforms are kept.

  Is there a way to do this? If not, is there another way to reach my goal? I also thought from another task, that outputs on the same at a slower pace, at the exact time that the first task finishes. However, it would have to occur at the exact time that the first task to complete; I can't wait for the other task to be cleared, the new task to be launched, etc.

  Thanks much for any reply.

  Djaunl,

  I think that what you want is non-regeneration.

  Try the example Cont Gen Wfm - Int Regeneration.vi Clk - no voltage at the entrance of equipment & output > DAQmx > tension.

• How can I change the default start in 32-bit mode mode

  This is the message I get when I try to download my music to Musicnotesorder: Sorry, this plugin requires that your browser run in 32-bit mode. To change the startup by default Firefox 32 bit mode, click on the screen and select the menu item: "Show me the window"Application information"so I can put the 32-bit mode myself" I don't know what screen they are referring. How can I change the default start in 32-bit mode? Leanne Norman

  1. Closing of Firefox
  2. Launch the Finder and open the Applications folder
  3. Make a right click or Ctrl-click the icon of Firefox.app
  4. Select "Get Info."
  5. Select or deselect the option "open in 32-bit mode".
  6. Close window "Firefox Info"
  7. Restart Firefox

• my fonts disappeared! When I go to change the system fonts and fixedsys... What do I do?

  I use Vista Home Basic and a little more than a month I've had problems with the script!  All the lines and symbols... I have restored until I can't do a day earlier that when this problem happened!  Finally, I changed the standard windows fonts and I use somethings, but much is still in the symbols (dashes, lines, etc.).  I went into my fonts folder in Control Panel and my folder is empty!  When I go to change the system fonts and fixedsys... What do I do?

  Hi Vickie,

  If you see only the fonts system and no additional (specific program) installed fonts, then you can try the following steps and check.

  Most likely, the fonts are installed on your computer are hidden. Did the same by following these steps.

  Method 1:

  a. open fonts by clicking the Start button, clicking Control Panel, appearance and personalization, and then clicking fonts.

  b. now click organize , and then click on folder and search options.

  c. click the display and check to select Show hidden files, folders and drives.

  d. click apply and OK. Check if you see all the fonts.

  (Make sure that show you the files hidden after the repair is done by selecting don't show hidden files, folders and drives.)

  Method 2:

  Try to perform the clean boot procedure and check if it helps.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  For more information, you can also read the following article.

  The problems of fonts

  You can also read the following article and check.

  Fonts: Frequently asked questions

  Hope this information is useful.

• How to change the mouse keyboard and mouse wireless in one click?

  Original title: How can I change the mouse to a single click? more it is difficult for an older person with arthritis.

  I would change the mouse keyboard and mouse wireless in one click. I have windows7. with windows xp, it was part of the accessibility options, but I can't find this option now. Any help would be appreciated. Thank you

  Hi knufyn,

  I certainly understand your concern and I will be happy to provide the steps to check if we can change the settings click on the mouse.

  Let us, perform the following steps and check if you are able to change mouse click settings.

  By default, the mouse is configured to use the double-click to open an item (single click to select) in Windows 7. To configure the mouse to use the single-click to open an item (point to select) setting, follow these steps

  un) Click Start

  (b) type appearance and personalization in the start search box, and then click appearance and personalization in the list programs.

  Note: If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  c) in appearance and personalization, click on Folder Options.

  d) in the general tab, click single-click to open an item (point to point)

  (e) click apply and click OK.

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• You cannot change the output type and format in the page requests system - PeopleSoft process

  Hi all

  When I navigate to the PeopleSoft process scheduler page and try to run a process I see the output type and format web and txt only. I am unable to change the output type and format. All formats and types of output are marked as active in the system settings page. I'm super user of the system as well. I have as well the role of Admin ProcessScheduler. I would like to know if someone has already faced similar problems.

  Thank you

  Vimal

  

  Run the following SQL query to your OPRID:

  SELECT A.CLASSID, PSPRCSPRFL A.OVRDOUTDEST, PSOPRDEFN B WHERE B.PRCSPRFLCLS = A.CLASSID AND B.OPRID = '';

  Make sure that OVRDOUTDEST = 1.

  If it's 0 then you have to fix your configuration profile of the process as follows:

  -Main menu > PeopleTools > Security > list permission > CLASSID research (white list) back to top query

  -Go to the process tab

  

  -Click on "process the profile permissions

  

  S ' ensure that 'substitute an output Destination' is checked. Click OK, and then save.

  

  This should solve your problem.

• How to change the application apps and the sysadmin password

  Hi expert,

  I know not how to change the password application and sysadmin in the oracle application. but I have a doubt.

  What is required at the bottom of the application when you go to change applications and the sysadmin password in the oracle application.

  Please suggest me what is the proper way to change the apps and the sysadmin password.

  to change the password for apps I followed the command below.

  FNDCPASS apps/apps 0 System/Manager SYSTEM APPLSYS < new password for applications >

  for sysadmin

  FNDCPASS apps/apps 0 USER sysadmin < new passwd for sysadmin > System/Manager

  Please clear my doubt.

  Thanks and greetings

  pritesh Rodriguez

  
  

  
  

  I know not how to change the password application and sysadmin in the oracle application. but I have a doubt.

  What is required at the bottom of the application when you go to change applications and the sysadmin password in the oracle application.

  You must stop the services before you can change the password of user apps, and then run the automatic configuration after changing the password and eventually train services to the top.

  Stop down services or the AutoConfig running is not required for SYSADMIN (and other users of the application).

  Please suggest me what is the proper way to change the apps and the sysadmin password.

  to change the password for apps I followed the command below.

  FNDCPASS apps/apps 0 SYSTEM APPLSYS System/Manager

  for sysadmin

  FNDCPASS apps/apps 0 system/sysadmin USER Manager

  Please clear my doubt.

  What change Applications using the apps schema password change Utility (FNDCPASS or AFPASSWD) (Doc ID 437260.1)

  Loss of password SYSADMIN. How to know the password of the user SYSADMIN (Doc ID 1066661.1)

  Thank you

  Hussein

  
  

• PowerCLI Script to change the DNS servers and domain name

  Hello

  Brand new to PowerCLI, I'm trying to create a script that will change the domain name and the DNS servers of my ESXi servers. I found that I need to update the Vmware.Vim.HostDnsConfig to update these settings. I created the following script and the following error.

  $config = new-Object VMware.Vim.HostDnsConfig
  $config.domainName = "new.domain.com".
  $config.address = new-Object System.String [] (2)
  $config.address [0] = "10.69.69.80".
  $config.address [1] = "10.69.70.80".

  _this $ = get-view-Id "HostNetworkSystem-networkSystem.

  _this $. UpdateDnsConfig ($config)

  You can not call a method on a null value expression.
  

  Line: 1 char: 23
  

  + $_C. UpdateDnsConfig < < < < ($config)
  

  + CategoryInfo: InvalidOperation: (UpdateDnsConfig:String)], RuntimeException
  

  + FullyQualifiedErrorId: InvokeMethodOnNull

  I guessed the error message that I need to a value in the host name, I do not need to change the host name. So I create a variable to remove the host name and place it in the $config. Line received host name but still a mistake because the variable is pulling more information that I need.

  $hostname = get-VMHost | Select name

  $config. Hostname = $hostname

  When I insert the above code I have an error.

  Exception by calling 'UpdateDnsConfig' with '1' or the arguments: ' year error occurred during the configuration of the host.
  Line: 1 char: 23
  + $_C. UpdateDnsConfig < < < < ($config)
  + CategoryInfo: NotSpecified: (:)) [], MethodInvocationException)
  + FullyQualifiedErrorId: DotNetMethodException

  When I look at the $config I see the following.

  DHCP: false
  VirtualNicDevice:
  HostName: @{Name = ESXI01}
  Domain name: new.domain.com
  Address: {10.69.69.80, 10.69.70.80}
  SearchDomain:
  DynamicType:
  DynamicProperty:

  Of course the @{Name = ESXI01} will not work. Someone can explain how to get a host name in a variable and pass it to the Config.Hostname?
  

  You should be able to do easily by using the command "set-vmhostnetwork.

  I don't think that you can just write to VMWare.Vim.HostDnsConfig.

• How can I change the user name and password

  I successfully download the FVO and install the virtual appliance. It works very well with my blackberry. I can connect to individual servers or virtual Center.

  However I don't know how to change the user name and password.

  I would also like to know how it works?

  We have a BES server on our network and no configuration is necessary. I just turned on the device Mobile Access of vCenter and entered the ip address of my virtual Center and bingo, I can access through my blackberry.

  If you try to change the Appliance virtual username and password, you can use the standard linux commands (adduser, passwd, chgrp, chown, etc.,)

  The default user name and password so that the robot is root/vmware"."

• Change the page size and text in Firefox 35.0.1

  I had a small red P at the top right of Firefox that changed the page size and the fonts that I lost after a reset: How do I get it back?

  Do you mean this extension?

  • Default FullZoom Level - https://addons.mozilla.org/firefox/addon/default-fullzoom-level/

  You can check the "Old data Firefox" folder on the desktop to see what extensions you previously had.

• A way to change the font, size and "BOLD" to each page?

  Due to problems described here https://support.mozilla.org/en-US/questions/1012057?esab=a & s = & r = 0 & as = s I erase that I need something (an extension, perhaps) I want to recognize and change the font size and "BOLD" fonts in each page.
  Is there something like this?
  Maybe also for the bookmarks bar...

  You can use the NoSquint extension to define the size of the font (zoom text/page) and the color of the text on web pages.

  • NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

• Can I change the new memory and at the same time to replace the Rams?

  Can I change the new memory and at the same time to replace the Rams?

  If a MacBook Pro RAM and drvie hard can be modified/improved depends on the submodel and we do not know yours. There are dozens of variations of the MacBook Pro issued since 2006, and you do not want guessing us!

  Please do "about this Mac" in your Apple menu to get this:

  

  Notice the line that I have highlighted with the red arrow. Please tell us what your computer has in the thr same place. However, do not post any serial number.

  With the exact submodel we can better advise you of any available upgrade paths.

• Satellite 1900-303: changed the BIOS settings, and now I can't boot from the CD drive

  Can anyone help, I inadvertently changed the BIOS settings, and now I can't get the CD player to boot the pc back to the default settings, Windows xp seems to work ok as is the cd player.
  If someone has the original settings, I would be grateful for any help.

  Derek has soon

  Hello Derek

  Use the F2 key to enter the BIOS settings and change the order of boot devices. This option is under the STARTUP tab. Otherwise, you can insert the recovery CD when the unit is turned OFF. Turn it on and immediately press the C button. keep it down for a few seconds and unit is forced from the CD/DVD drive.

• How to change the secret question and answer if I've forgotten my email of rescue?, how change the security question and answer and if I've forgotten my rescue by email?

  How to change the secret question and the answer if I've forgotten my email to rescue?

  You have to ask Apple to reset your security questions. To do this, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.

  
  (137073)

• Change the screen startup and connection to the new theme

  How can I change the screen startup and connection to a theme driven as something the matrix? I know that some people have created programs that can do this, but prefer to stay with microsoft to do this, if possible.

  Microsoft is not all programs that allow you to do.