Change the size of the Composition?

Similar Questions

• Does anyone know how to change the composition of Adobe Creative cloud AE single app to the student member that includes the creation?

  Does anyone know how to change the composition of Adobe Creative cloud AE single app to the student member that includes the creation?

  Hi Danielle,

  Thanks, I tried to do but unable to communicate with anyone.

  Here you go: Contact customer service

  Thank you

  Kevin

• Changing the Composition resolution blurs my images.

  Hi, I would greatly appreciate any you could throw on an issue that we will have some light.

  We have some rendered images of 3DSMax to 380 x 320 pixels, and we have it as a sequence of images. We have about 150 rotations of spinning product already made to this size and these initially sitting in a flash model, so a user could turn product autour. The customer's Web site was redesigned and we must integrate these makes a model of different size, specifically 396 x 297 (which is the size of the new flash player). However, whenever we try to change the resolution of the composition of 380 x 320 396 x 297, the film seems to have been almost "fuzzy" and becomes blurred. It is not very pretty and we lose the images we made out. We do something wrong? We tried to place the pictures (380 x 320) in a composition of 720 p and it looks good, but as soon as we change the resolution to 1280 x 720 to 1280 x 719 it blurs it once again. We also tried to keep the same report that the original film but by changing just the height or just the width and the same issue occurs. Sometimes it's worse. We made sure it's too square pixels.

  I made sure that After Effects is up-to-date, and we made sure that OPENGL is off. This vagueness is not only evident in the preview, but also when we make out as a Quicktime Animation. We use After Effects 5.5 on Windows 7, but have also tried this on a Mac without result (for the hell of it).

  What happens here? Thanks in advance for any help you guys could offer, thank you. It has been the bane of my life for 2 days! I don't know that it's just my lack of understanding of the functioning of the pixels and stuff. I have read through the help documentation, but maybe I'm missing something?

  As long as your film is not resized as long as the position property is on whole pixel values there is nothing about the size of a composition that will change the sampling of pixels void (sharpness) of the sequence.

  If your film is an odd number of pixels high or wide, it will be softer in After Effects, it's in Photoshop because that AE will be zero the anchor point in the middle of the sequence and half a pixel off forcing sub pixel resampling. There is no way to avoid this except to manually reset the anchor point to a whole pixel value.

  If your film is vector art and this isn't an even number of pixels high or wide, you will have exactly the same problem that you have with rastor images, unless you set the continuously rasterize images. If set to continuous raster and vector art was created in Illustrator with nod to the set of pixels, then a line of 1 pixel (a point) in your vector image, even with the collapse of the transformations on will be rasterized in AE in a width of two pixels line because the line is not aligned with the composition pixel grid. That's a lot of difference if your work has thin horizontal or vertical lines. It's always a good idea to keep all illustrations an even number of pixels high and wide.

  If footage only looks sweet when rendering you are facing the same void pixel sampling problem when your publication is an odd number of pixels high or wide. All MPEG (including FLA) films must be an even number of pixels high and wide. This is how the compression. This is how the codec. If make you something to 295 X 333 pixels for a MPEG codec then rendering will be converted to an even number of pixels high and wide. This will soften the rendering. If it's H.264 (movies more flash are returned to the h.264 format) then you're stuck with a frame size requirements even tighter game.

  Check the anchor point of your film. If it isn't a whole pixel value, change it. Make sure it is positioned on a whole pixel value.

  Now change the size of the model at any number of pair of pixels high and wide, and the images will display exactly the same as long as your model and your film is square pixels. If your film or your composition is set to any other format of pixels then the image will soften. Can't do anything else.

• First substitute After Effect changed the composition with the previous edition.

  It is a strange...

  I select a clip in the first and choose rendered in AE. I then edit, save the file in AE, AE nearby, date back to the creation and the version change is sitting pretty, no problems so far. I save the file in the first, which, in my experience, is the light of the foregoing, all must task and move on to the next item. I'm doing the same procedure... change in AE, open AE, make changes, save, go back to the first and there is the new replacement, no problem... except... the first clip I edited at AE was replaced by the other. I have therefore 2 identical compositions of AE where I have 2 different ones. Moreover, when I left first and open the first AE publication independently in AE it too has changed in the second composition, EVEN IF it has been registered in a separate file. I can understand sort of what happens, but how to avoid this happen and what happens to the first composition I saved?

  I trash your preferences and try again.  http://blogs.Adobe.com/genesisproject/2009/11/having_weird_behavior_with_an.html

  In addition, when you make your second model, make sure that your first AE project (including the model) is open.

  Hope this helps,

  Dennis

• help to change the size of precomp (weight and size using the script)

  Hi guys, need help with change precomp size (weight and size using the script), my problem in this... when I change the size of the model (height and weight) of GUI AE, AE change the size of the composition of the Center model, but if I change the size of the model of my script it change from upper left... so I need some how change in the center of scripts of composition or something like that?

  now I change size with this code

  MyComp.Width = myComp.Width.Width + 50;

  MyComp.Height = myComp.Width + 50;

  Hi Zipkiev,

  If you want to change the composition and all the layers it contains, there is a script: scale Composition.jsx that comes with Ae (in the Scripts folder) which does exactly the same thing.

  He puts on a scale by a factor uniform using a temporary null object. You can twist no uniform scaling by a factor.

  But if you want only to preserve the size of the layers and adjust their position so that their new position relative to the new comp Center is the same as previously, the script above can not help.

  In the simplest situation you just compensate for all positions of layers related by the same amount: [(compNewWidth-compOldWidth) * 0.5, (compNewHeigth-compOldHeight) * 0.5].

  Not sure it will work well in all situations (such as 3D with cameras).

  You can try it, it might work for you:

  COMP is the composition, newWidth, newHeight its new width/height

  var

  DX = (newWidth - comp.width) * 0.5;

  DY = (newHeight - comp.height) * 0.5;

  layer, n,

  p, j,

  value;

  COMP. Width = newWidth;

  COMP. Height = newHeight;

  for (n = 1; n<=comp.numLayers;>

  layer = comp.layer (n);

  If (layer.transform &! layer.parent) {}

  p = layer.transform.position;

  If {(p.numKeys===0)}

  p.value = value;

  value [0] += dx;

  value [1] += dy;

  p.setValue (value);

  }

  else {}

  for (j = 1; j<=p.numKeys;>

  value = p.keyValue (j);

  value [0] += dx;

  value [1] += dy;

  p.setValueAtKey (j, value);

  };

  };

  };

  };

• How to change the font size

  I must have hit the wrong button. When I booted my computer text and objects were suddenly tiny. I can't change the screen resolution, because it is already at the maximum: 1920 x 1080 pixels. I am unable to change the DPI setting.

  In Internet explorer, you can use these shortcuts.  Other browsers are similar.

  Zoom + (more) CTRL in
  CTRL + (Zoom out less)
  Scrolling CTRL + mouse wheel

  To change the size of the font used in the composition of e-mail Hotmail (using browser)

  1. sign in to Hotmail and go to your Inbox.
  2. click on Options then on more options.
  3. under writing e-mail click on signature and Message fonts.
  4. Select the font size, type of police and formatting you want at the top of the police of Message box (you can see how it will look on the sentence under).
  5. click on save.

• When you move the cursor, rather than move, the police often changes a size big or too small to see.

  Original title: "when I try to move the cursor, instead of move, the font size often changes to a huge size or one size too small to see. In addition, it can jump to the top or the bottom of the page. »

  More I use Vista, more I hate it!

  It came pre-loaded on my Fujitsu Lifebook. I had heard talk were many complaints about Vista and I wanted to stay with XP or Windows 7.  Each manufacturer of the laptop has been unfortunately Vista preinstallation.

  • When I use the word processor Works Windows, sometimes without warning he automatically becomes italic police without any input from me.
  • If on Windows works WP or on any page of e-mail online, when I starts to move the cursor, a little 'target' - as the icon appears when the cursor was and, either changes in font size of microscopic or 500% or more.
  • On the Internet page of wole can shrink or get huge.
  • At other times, with one touch of the mouse or touchpad, rather than the font change, the cursor may disobey my entry and the end to the top at the bottom of a page where I won't be, or somewhere else. When I get back to the expected location, it can repeat the same action three or four consecutive times before to behave normally again.  This makes typing manuscripts or very frustrating messages sometimes, not to mention a lot of lost time.
  • When you try to type copy from a printed script, if I don't keep control of the screen I can finish with margins stange, italic where they belong or phrases that are moved where they belong.
  • Sometimes when I'm trying the high - lite a word or phrase so I can drag it to another location, it will refuse to high light, making necessary use rear brace to delete the words I want to drag and retype the words to the new desired location.
  • Another problem is that the will of cursor down stubornly and turn several times since the location of the Center to the extreme side so that the rest of the page is covered.  Vista seems to have a mind of your own.

  This set of problems seems to migrate from MS Word to MS Works, Web pages, and e-mail message composition.  I thought it was the new computer initially. I even returned it to Fry's electronics for maintenance two times.  I mean, they just excanged for another new Fujitsu Notebook.  When I got home, the replacement computer have behaved in the same way, which indicates that it's the software, not the hardware.

  Funny thing - now that I complain on this topic in this forum and have written this much, it doesn't have behaved badly again!  The ghost of Vista must have been scared and went into hiding.  ;-)

  Yet once more I use Vista, more I hate it!  -especially since I was in the middle of writing a book for publication.  In light of the frustration and the loss of my precious time because of these persistent bugs in recent months, I wish MS would trade my copy of Vista for Windows 7.  MS seems to be getting a reputation for releasing Beta quality software and call it a finished product.  You would think that MS wakes up to the fact that consumers expect to have for their money.  Everyone has the same problems?

  Are there realistic solutions out there?    Hmm, no spell no checker on this page.  Sorry for the typos. :-)

  You can get in trouble with your mouse device drivers, firmware and/or software.  This may be due to a Microsoft Update or any number of things (and could have happened to these two machines, if you did the same thing in both cases).  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you should get for your mouse at the very least and I consider the keyboard as well and make sure they are compatible with your device, and your version of Vista) and all you have time to do - they can help way beyond simply solve this problem) leave the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows:http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  Also, your mouse may have the functionaality to change the font sizes and jump from one end of the screen to another by doing some things.  Read the user manual and/or research through start / Control Panel / mouse to see if this is the case and if so, it may be able to be disabled.  The problem with some of these "features are that if you don't know about them they can cause difficulties when they activate for apparently no cause when you actually not what caused the feature must be enabled." It took me a while to realize the CTRL-0 would change my IE screen at 100% size and I first thought there was something wrong until I discovered the problem by chance.  I say that, because the odds of two computers with the same exact defect are astronomical - it looks more like a problem as described above or a certain type of function you are unaware of (perhaps in combination with a keyboard input that is why I suggested that you update those as well).

  I hope this helps.  If not, I am sorry to say that your best option would be to go back again to see if they can reproduce the problem (you use your way computer in case it is something you do) and either repair or replace again (or change to another computer entirely).

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Resize the image sources - change the size of the images database

  Hi all

  I have a trivial problem, but I can't deal with it. I have a project with compositions called slides. Each slide have JPG image as layer and this image is assigned 100% to 106% Resize effect (two keyframes). The images have their own folder. I need to replace all the images but the problem is that the new images have different sizes, for the most part, they are bigger than originals. When I right-click the imported images directly on I don't see any options to change their size (single space reserved or solid). When I double click them to open it in a new tab I don't see no resizing tool and layer menu is grayed out for the most part.

  So far, I found that I have three possibilities:

  1. resize as a layer in the composition of each slider. Unfortuately I don't see any way to change the database size, so resize here means add another keyframe or change existing. If I change the first keyframe on the layer in the composition of the slide then I have to proportionally resize the last of them. There are about 20 slides this process would be quite painful

  2. resize the images before importing - with PSP, GIMP or same IrfanView. It would be a much better solution than before however, this means a blind resizing - without no preview as the composition. Whenever I want to change the size a bit, I have to import image again. Painful.

  3 convert the images to the compositions,

  Convert each JPG file in composition, put this composition as the layer to each composition drag next to layer JPG, transformation of copy of layer of JPG to the composition of the image layer and delete the JPG layer. Long process but the effect is exaclty as I want and the project is fairly durable for any other modification of the image. However, in larger projects where there are many effects assigned to layers, it would be very painful.

  So is there an easy way to change the sizes of the imported images database? I can't believe that in such a huge program like After Effects, there is no way for such a simple task. I believe firmly im just something missing.

  You can resize your layers in Ae with scale parameter. (transform-> scale). If there is no animation, you need not place a keyframe. for example, you can resize your layer to 46% and decide to evolve for a while, so the first keyframe will be 46%, and the last keyframe is 83%.

  Yes, I know that if you have layer with no keyframes for the scale property then scaling ways to change the size of its base. However, in my example, I have two frames - 100% and 106%. If I import large image so I have to resize. If im on the first keyframe, and then it wil change its size to 100% for example, 56%. But the last keyframe is not changed - its still 106%. So that means animation past from 56% to 106% - image develops much more quickly than in an original animation.

  But now I found that I can select all the points of the keyframe by clicking on the entire property scale and resize proportionally when I resize the image, all the points of the keyframe. It's the simplest and most effective solution for me!

  Thanks for the help!

• Cannot change the size of the trigger

  whenever I try to change the size of the trigger, it returns to its original state as soon as I let go of the mouse. This is a problem because now all my goals are overlapping.

  I don't know if this is necessary, but it is a picture with a smooth rolling inside the trigger that is connected to a composition of light-box with a slide show placed inside that.

  any help?

  I'm assuming you are trying to set the trigger smaller, if you do this make sure that there is nothing else inside the trigger that is greater than to be the trigger. most of the time for me, I have a text box in mine

• Change the size of video FootageItem in layer

  Hello

  I replace footage in a layer by using the following code (earlier in my code, I said 'sex'):

  var targetVideo = "pathTo/my.mov";

  var myFile = File (targetVideo);

  If {(myFile.exists)

  importOptions var = new ImportOptions (myFile);

  var theImport = app.project.importFile (importOptions);

  layer.replaceSource (theImport, true);

  }

  This replaces the layer source and seems to keep the values of property such as the scale and rotation,

  which is nice. But my video goal is thus more large (higher resolution) to my video source.

  and I would size down so that it looks the same after replacement, while preserving the properties of transformation applied to the source layer.

  
  

  I cannot just resize the layer or the layer.source because it gives me an error:

  'Cannot change attribute 'width' to the point 'myVideo.mp4' because the element is neither a model nor solid. "

  I guess I could try to nest the strong layer or within a model, and then change the size of the parent layer.

  Would it be the way to go or there at - it an easier way to deal with this?

  Thank you!

  Jeff.

  I did some digging in the literature ( restrictive - http://download.macromedia.com/pub/developer/aftereffects/scripting/After-Effects-CS6-Scri Guide.pdf ) and there is no way to change the width or the height of an element of footageSource or AVItem if its source is a footageSource. You can change the width/height of a solid/element layer. This is logical - normally, if you select a solid layer and go into «Settings of layer/solid...» ", you can set the dimensions, but you can never do the same thing for a footage item. Think about it - the way you redimensionnerez images in your compositions using simple scale transformations. Therefore, the solution would be to scale x and y of your new images to match the old images. So, something like this:

  1 calculate and record the width and height of your images before, taking into account possible scale.

  2. replace the film.

  3. use transformations to scale on the new layer of film to match the dimensions of old images.

  You're going to need some math to figure out how to do things, but this should be the gist of it.

• changing the size of the model

  I have a composition that is used the layers which are 2000 x 2400... the size of the model is the same size.  It turns out that I need the animation at 118 x 220.  When I changed the parameters of composition (width/height) size change BUT the image of interest is cut.  I need to make sure that all of the image pprears in 118 x 220.

  Please tell me that there is a simple way.  I can't wait to go back in the PS to change settings.

  Thank you, - bill

  CS4

  Go to file > scripts > script samples. There, you will find a model of resizing script. That's what you use for your project. He's going to do a much better job than nesting or resizing in the output module. I recommend never resize a composition in the output module.

• YouTube slow to change the size of the screen

  Just updated to FF42 and noticed a problem with the change of YouTube screen size. More specifically, when I change the screen full-size and vice versa full to view normal change it is significantly more slow then before. I don't see this problem on Chrome or IE9 and he started with the 42 FF update. Must be something the way FF42 manages the resizing of the screen. I look forward to comments from person. Thank you

  About: config change these:

  full-screen - api .transition - duration.enter
  full-screen - api .transition - duration.leave

  200 200-1 - 1

• Can I change the font size of the subjects email in my Inbox

  I'm changing the font size in the Inbox for a friend with a visual impairment. I am not able to find an option to do it though. Is this possible?

  I think that you need an add-on.

  https://addons.Mozilla.org/en-us/Thunderbird/addon/theme-font-size-changer/

  http://Xenos-email-notes.simplesite.com/416814616

• How can I change the font size on my tab headings and bookmarks menu? The fonts have inexplicably increased in size and I can't find an option to change them.

  Without any evident input from any of the users on my PC, the police in my topics tab, field toolbar and bookmark URL has increased. I can't find any options to make them smaller. I changed the font for my content page and main menu but I'm stuck with large large fonts out of proportion to the securities tab, toolbar field and bookmarks URLs.

  RanchInNevada

  Try to use this extension.
  https://addons.Mozilla.org/en-us/Firefox/addon/theme-font-size-changer/

• Font and size: how to change the default (for outgoing e-mail)?

  I'm going to 'Write', I put it in the address, etc., and when I start typing my message, the font size is tiny, the font is Times, although sub
  Format - fonts, I see Helvetica and size is extra-large. Sometimes using "fixed width" gives me a better font size. I then choose a font of
  "Choose a font", and I'm all set. However, I have to go through the same procedure for each e-mail! Help!

  Try changing the settings in Tools - Options - display - (tab) - (article) fonts & colors - formatting, enter a default font and the font size to use when NO other formatting is specified.
  Now press the button on the same line,
  in the next window, make sure that the police and & the font size you want entered in the selection boxes.
  Under the control of the police - the two boxes ticked? Your choice.

• Is there an add-on that will change the defalt for only a single Web site text size?

  I would like to change the size of the default text of a site without changing anything else. E.g. onelook.com. Can I change the size of several ways, but I have to change it every time I'm looking for a Word. I don't want to change windows or Firefox. Just this site.

  Make sure that you are not Firefox running in permanent private browsing mode (don't remember history).

  • https://support.Mozilla.org/KB/private+browsing

  In case you use 'Clear history of Firefox closing' or otherwise to clear the history.

  • do not delete Site preferences
  • Compensation of the "Site Preferences" clears all exceptions for cookies, images, pop-up windows, installation of software, passwords, and other specific data from Web site.

  You can also check for problems with the content file - prefs.sqlite in the Firefox profile folder.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  Also check on the topic: config this site specific zoom page is enabled.

  • http://KB.mozillazine.org/browser.Zoom.siteSpecific

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config