SE "debug token does not apply to this device".
After graduating from "misssing of signatures required 881 result::failure
result::failure 881 debugging token does not apply to this device Try to hold the power button on top for 15 seconds to do a reset. Tags: BlackBerry Developers Satellite 3000 - X 11: Bios 1.60 does not apply to this machine I've seen this question asked a couple of times and it does not seem to have received a response. I can download the bios driver from the download section of the BIOS and install it in the floppy disk OK When I boot the PC with the floppy in there, a little chuggs (i.e. reads the floppy!) then he said to me: BIOS UPDATE FAILED! Someone actually managed to upgrade an S3000 - X 11 with 1.60 worm? The indices of anyone! KeV Hello I checked the BIOS file on the page of the Toshiba driver and the text in the more information section, said: Windows-based update Bios. You must download this file, if you want to update your BIOS from Windows. Apparently, these BIOS must be installed Windows! But a question: why do you want to update the BIOS? If the laptop works well, the update of the BIOS is unnecessary. I am running Vista Home Premium with Service Pack 2, 32-bit. For example, I have the 8.0.6001.18828 version. I use AVAST AV and Comodo Firewall. I've never had McAfee. I have 18 'Important' Windows Vista updates will not be installed: several updates, several windows Vista updates, etc. Back to 08/12/09 and 27/04/10 the most recent. They start to add up. Here is a screenshot of them: http://img94.imageshack.us/img94/5003/updatesl.PNG For about 11 of them, let's say in the meantime (until restarted), but then after the resumption, that they do not have to install but have no error code. The event viewer indicates that they are 'not applicable for this system' (then why they have been downloaded?). Who does not apply are: KB905866 KB971468, KB972270 KB979683 KB978601, KB977816, KB978338, KB979099, KB974318, KB980248, KB980232. The rest of them, as (for example, KB980182) will fail because of an error of 8007371 C. In Event Viewer, they all have a sequence of error similar to this one (it's for KB980182): ### 11:10 - Windows Servicing has completed the process of configuration KB980182 (update) package in State to install Requested(Install Requested) ### Things I've tried: 1. installation after a clean boot - at first, seems to be successful that I can get the list to the left of 1 or 2, but at some point given shortly after they all reappear. 2A ran the System File Checker that comes up: "Windows Resource Protection has not found any breach of integrity." 3 reset Windows Update components (manually or with the "FixIt" solution to http://support.microsoft.com/default.aspx/kb/971058?p=1) 4. stop of services related to Windows Update, rename system folders, saving and then associated DLL files by restarting services (as described here: http://social.answers.microsoft.com/Forums/en/vistainstall/thread/ed275467-5580-41dc-9ccc-3c1e22c6fd28)-same result 5 install in safe mode - gives me "Setup has encountered an error: 0x8007043c.» This service cannot be started in safe mode. ») 6. scan the hard disk for errors (e.g., check disc) - Nothing found 7. search for viruses, Trojans and malware - do not have 8. install with UAC, anti-virus and firewall off the coast - same result 9 install the upgrade preparation tool system for Windows Vista (KB947821) [January 2010] (with UAC, AV, etc off), but the installation 'failed' (no error code). Installation in safe mode it gives me the «...» "0x8007043c. this service cannot be started in safe mode." 10. manually install them - same result A short circuit contact MS have exhausted the options? Thank you. This is not a beta or Release Candidate build both fuhgeddaboutit and open a free support incident. PS: I think you will find that the updates are not installed due to infection hijackware, Kurt. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft Windows Server 2012 R2 - HF ALL them do not install as "does not apply to this computer. Hello A general question about patch installs. I have several servers which are all Windows 2012 R2. They don't have internet connections, so I have to install the patches manually. I have download the HF from the download page of the ISO (https://support.microsoft.com/en-us/kb/913086) every month. I collect them and install in a facility in bulk during a release cycle (once or twice a year). I just realized that no. HF have installed since JUNE 2014. Each HF that appears in the directory WindowsServer2012R2 do not settle with a message "the update is not applicable to your computer. Which is fine if that was true, but... I get this message for each HF ISO since June 2014. NOT a single HF, it's applicable to my computer. Would this be the case? No HF apply to my 2012 since June of 2014 server systems? This is my system information, and below that is the result of any attempt to install 95 HF C:\Temp>Systeminfo Host name: MYHOST
I have a script that runs each HF installation... If I manually run them without the tools I get the same results is not the script... Install 95 patches
The repository path: U:\Patch Repository_4_1\2012_R2_HFs\ 1 Windows8.1 - KB2894852-v2-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
Thank you Dave Dave, It is a forum for specific consumers. You can find the Windows Server support in these forums: http://social.technet.Microsoft.com/forums/en/category/WindowsServer> Specific Windows Server security sub-forum: http://social.technet.Microsoft.com/forums/en-us/winserversecurity/threads> Hello I have a usb_dev_serial.inf of TI and a catalogue of security usb_dev_serial_amd64 and a folder containing the amd64 Hi Larry, Thanks for posting in the Microsoft Community Forum. According the description, I understand that the USB device does not work, rest assured that we will do our best to help you with this problem. Answering the question that helps us provide the best solution: 1. it worked before? The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues. Try the following and see if it helps. Method 1: Description of errors related to the 10 Code that generates the Device Manager in Windows on computers: http://support.Microsoft.com/kb/943104 Method 2: Install the latest driver for USB and check if that helps. To do; a. click Start, type devmgmt.msc in the start search menu. b. right-click on the USB device and click on Update driver software. Updated a hardware driver that is not working properly: http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly Method 3: Try connecting to another USB port and check if it helps. Hope this information helps. If you have any other questions feel free to respond and we would be happy to help. HDMI connector does not work on this device Data sheet: ASUS laptop Windows 7 Home Premium 1.3 Ghz 4 GB of RAM 64 bit OS HDMI does not connect with the TV and it works with my other laptop. I have pluged in the HDMI cable and turned on the TV input HDMI. How can I fix? Thank you for your help, Disco Hello rat Disco, 1. What is the brand and model of the TV? There could be various reasons as the TV is not compatible, cables not connected correctly. I suggest you run the hardware and devices Troubleshooter and see if that helps. Open the hardware and devices Troubleshooter If the problem persists, then I suggest you to try the steps from the following link: Connect your computer to a TV I hope this helps. Let us know if you have other problems with Windows in the future. Update for Windows Vista (KB973687) Installation date: 26/11/2009 23:14 Installation status: failed Error details: Code 80070026 Update type: Important Install this update to prevent applications from sending too many requests HTTP, while a well-known Document Type Definition (DTD) is included. After you install this item, you may have to restart your computer. More information: Help and Support: You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below: http://social.answers.Microsoft.com/forums/en-us/vistawu/threads When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update. In this way, you will receive the best help. See you soon. Mick Murphy - Microsoft partner Said updated stand-alone Windows Setup program do not apply to this system. I tried to download and reinstall the stand-alone windows installer, but get the message that no update available for this system or this download does not apply to this system. Standalone Installer, I think it's a system XP instead of Vista Home Premium 32 bits of the system. How can I uninstall the stand-alone Windows Installer and install one for Vista? Is it important that I have a desktop computer that has XP on it? I also rename the laptop with the Vista program to my name. Is it relevant. I tried to reverse the name Hi Rockyakauke25, This day stanalone you trying to install? Try to install the update in safe mode. Try to install the update in safe mode and see if you are able to install. Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed. To start in safe mode, follow the steps below: 1. remove all floppy disks, CDs and DVDs from your computer and restart your computer. Click the Start button, click the arrow next to the button lock and then click on restart. 2 , do one of the following:
· If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer. · If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8. 3. in the display Advanced Startup Options , use the arrow keys to select the option of safe mode you want and press ENTER. For more information about the options, see Advanced startup options (including safe mode). 4 log your computer with a user account with administrator rights. Install the prerequisite updates before applying a new update that is installed sp 1 for a successful installation sp 2. See the link for download of SP1 and installation http://TechNet.Microsoft.com/en-us/Windows/bb738089.aspx Try to run the system update readiness tool before installing the SP1 or SP2. Thank you, and in what concerns: I can't get Adobe Lightroom updates to 6.0.1 to 6.3. I get the update of the message U44M2P28 error does not apply. Can you help me solve this problem? Would you uninstall Lightroom and restart your computer, and then please follow mentioned below as follows: 1. first install Lightroom 6.0 from the link below: 2. upgrade to Lightroom 6.3 using the link below: http://blogs.Adobe.com/lightroomjournal/2013/06/keeping-Lightroom-up-to-date.html#lrcc2015 ~ Sarika I downloaded ps CC and CC bridge but camera raw has no load up automatically. I tried to download Camera Raw 6,7 Adobe, but it is said that this camera raw does not apply to me. Any thoughts? HI JohnnyFinley Photoshop and Bridge CC includes the latest camera raw Plugin 9.1.1.Camera gross 6.7 does not work with CC products. You should be able to see the camera raw version 9.1.1 if you have downloaded the version of Photoshop CC 2015 Alternatively you can manually download Camera raw here install plug in Camera Raw Concerning Assani windows Vista easy transfer this update does not apply to your system I'm trying to download the Windows easy transfer software to transfer data from my 32 bit Vista PC to a new Windows 7 PC. The software seems to download correctly, but when I try to run the program I get a message of stand-alone installation of Windows Update, saying: "the update does not apply to your system." Hi JSmith, You can check the following thread link and advice given by Halima S, technical support engineer. dominiquefortin wrote: We are in the process of migration of the APEX v3.2.1 on the database 10 g to v4.2.1 on database 11 g. APEX APEX is installed fresh on 11g. I was testing imported and exported of v3.2.1 application in v4.2.1. I was not able to activate the debug mode in the developer bar when the application runs. The url changes, but no debug information appears as was the case in v3.2.1. No debug information appears online in the APEX 4.x page. All of this appears in the debug window. I see a partial set of debugging information when I open then see the debug window in the bar of developer. This show of debugging is incomplete. By that I mean I don't see not session state change and I don't see any information in the function "wwv_flow.debug". Note that the debug window contains an interactive report that applies a default filter for the last visited page. You might not see the report of the desired page. Remove the filter from the page to see all the currently available debug reports. There are also separate reports for each page show/accept, then make sure that you select the correct phase. I read in a thread for an earlier version 4, toggle the debug field in edit application properties and apply, but that no longer works. Something to note is that when the debug field in edit application properties was set to NO, I don't have the error "Debugging is not enabled for this application" when you turn on the debug mode. I think maybe I saw a bug for this, but I can't find a reference at the moment. There is a global setting in administration somewhere I should activate to get debug information in the page as in v3.2.1? N ° all debugging information are now displayed in the debug window. Change password with the password token does not work My mother lost her password. So, we asked an e-mail with a password token and clicked on the link in the mail. Responses from the site sorry this token of password is not recognized, please try retyping or get password another token. Then we have copied and pasted the token giving the same result. We did this three days after another. So every day we ask you an email with a password token, and every day the site said us sorry this token of password is not recognized, please try retyping or get password another token. The system of resetting password with a token does not, at least not in the Netherlands. Does anyone have an idea how to solve this problem? Sorry, but the mentioned page asks you to connect with your name Skype and password, so that we cannot further. My mother has a balance of Skype credit that she doesn't use anymore. What is the problem with the password reset procedure? OK, after a very good conversation with Cherry B we discovered that the account is a Windows Live account, then we should change the password in Windows Live. The password reset procedure could mention this... Fix installation problem: "the update does not apply to your system. Greetings and thanks for reading. Currently, I am trying to fix a problem of high performance mouse. During the game, the mouse staggers moving (or 'looking', through the mouse) left or right . I tried two different mouse and the problem persists. The mice and their software, both work fine when connected to an XP system. By raising the solution, I found this support page that seems to match symptoms more than all other pages (with the solutions, I have already tried) I found: http://support.microsoft.com/default.aspx/kb/932653/en-us?p=1 The page suggests that a service pack must be installed (already done) and otherwise, to try a fix . I got the patch in question, but when trying to apply the patch I am presented with an error message: "The update does not apply to your system." I understand that this question would happen if I had chosen the bits bad operating system (I chose x 86 for my 32-bit system, rather than the x 64 bit), but I chose the right bit system. I wonder how do I overcome this problem during the installation of the hotfix. I want to emphasize: I updated all drivers for the system (I had to shell out money for a driver update program because you are looking for that many drivers manually is virtually impossible), including the specific software for the mouse, the firmware of the mouse... None of them solved the problem. This fix may be my only remaining option to fix this mouse and I am unable to continue without help. Kind regards mousesupport12345, Explain when you experience the problem. It is only in the games? If so, is it all games or only some of them? Clean boot your PC then test the mouse and see if the problem persists. Mike - Engineer Support Microsoft Answers When I copy a CD in Windows Media Player 11 does not apply media information. With the XP sp3 operating system, I rip the CD purchased and Windows Media Player 11 does not apply media information. Either he gives and error saying that it cannot be done because I am not connected to the internet while I'm connected, or it can recognize my internet connection, but I have to do a manual search and manually apply the name of each track, even if they are present and order under each line I have to click to match the name of the correct track. It's so frustrating to have to fight manually for applied information on the media which is clearly presented, and after all, album art that shows correctly in the finder info media constantly refuses to fill in the library and I have to go to a separate Web site and copy and paste it in. Yes, he found elsewhere on the internet, with the help of the connection which was present all along! It's crazy, the info is already there! And why do I go online in any case the info is in the CD? This doesn't seem to be a problem with the previous players. Please provide a fix for this useless, frustrating dinosaur, waste of time, a process! Have you tried to delete temporary Internet files and the Cookies in Internet Explorer? If you temporarily disable your firewall software, which helps? This could be a third-party firewall, like Symantec, or the built-in Windows Firewall. Hello I'm updating of the bios in my tecra 8000 successful. "Finished WRITING successful ROM utility. LEADER BIOS: Tecra8000 v 9,30 " I can't turn on my laptop (press POWER), but the display is black and tecra does not not :((( When I find the old ve Satellite L30 - 10V - CD/DVD read not all drives because Windows 7 upgrade I have a Satellite L30 - 10V which I've updated Vista to Windows 7 (full version). I am now unable to read any CD at all. He thinks that all CDs are totally blank new CD Anyone has any ideas what could be the problem? Connect the temperature and moisture to put in operation the fan Guy! I need help on my connection how to connect the circuit? The first that I want to connect is my data of thermistor. Then I connect the temperature control to turn on the fan. How to do? Aloysius Low, student Toshiba Satellite M100 laptop P.N.: PSMAOL-OC9009 S.N.: 66201918K N.B.: No driver is available Gilles Tan Creating table in the desired tablespace HelloI created the CUZK_BACKUP tablespace:CREATE the TABLESPACE CUZK_BACKUP DATAFILE ' / oradata/RUIAN/cuzk_backup01.dbf' SIZE 3 G AUTOEXTEND ON NEXT 100 M MAXSIZE 15 G;Now I'm trying to create table in this space of table like this:BEGIN-zjisti, if Similar Questions
I have a laptop, satellite
Name of the model: S3000 - X 11
Model No.PS301E - 001VY-FR
Current BIOS 1.00 (I think that... Let me watch!... it is said: Phoenix Bios 4.0 release 6.0 and below: ATW03 BIOS VERSION V1.00)
(He tells me that this update's Satellite 3000 - PS301 only)
THIS BIOS UPGRADE ONLY TO NOT APPLY TO THIS MACHINE. Contact the good BIOS upgrade disk.
Please remove the disk and press any key to restart.
If you want to do the update of the traditional Bios, you must download the update of the traditional BIOS.
11:10 - Windows Servicing has not completed the process of change update 980182-39_neutral_PACKAGE of packaging KB980182 (Update) in Staged (Staged) State
11:10 - Windows Servicing has completed the process of configuration KB980182 (update) package in State to install Requested(Install Requested)
11:10 - Windows Servicing has not completed the process of change update 980182-38_neutral_PACKAGE of packaging KB980182 (Update) in Staged (Staged) State
11:10 - Windows Servicing has completed the process of configuration KB980182 (update) package in State to install Requested(Install Requested)
11:10 - Windows Servicing has not completed the process of change update 980182-37_neutral_PACKAGE of packaging KB980182 (Update) in Staged (Staged) State
11:10 - Windows Servicing has completed the process of configuration KB980182 (update) package in State to install Requested(Install Requested)
11:10 - Windows Servicing has not completed the process of change update 980182-2_neutral_GDR of packaging KB980182 (Update) in Staged (Staged) State
...
[several other of these errors, with '2' to 36, even numbers only]
...
11:11 - Installation failure: Windows failed to install the following update with error 0x8007371c: Cumulative security update for Internet Explorer 8 for Windows Vista (KB980182).
Name of the operating system: Microsoft Windows Server R2 Datacenter 2012
OS version: 6.3.9600 n/a build 9600
OS manufacturer: Microsoft Corporation
OS Configuration: Member Server
OS Build type: multiprocessor Free
Registered owner: Windows user
Registered organization:
Product ID: 00252-80025-36226-AA727
Original installation date: 13/06/2014, 08:04:39
Starting system: 16/03/2015, 14:34:45
System manufacturer: Dell Inc..
System model: PowerEdge R720
Type of system: PC x 64
Processor (s): 2 processors installed.
[01]: Intel64 family 6 model 62 Stepping GenuineInt 4
El ~ 2500 Mhz
[02]: Intel64 family 6 model 62 Stepping GenuineInt 4
El ~ 2500 Mhz
BIOS version: Dell Inc. 2.2.2 16/01/2014
Windows directory: C:\Windows
System directory: C:\Windows\system32
Starting device: \Device\HarddiskVolume1
Local system: en - us; English (United States)
Input locale: en - us; English (United States)
Time zone: (UTC-07:00) time of the Rockies (U.S. & Canada)
Total physical memory: 262 099 MB
Available physical memory: 249 337 MB
Virtual memory: Max size: 301 011 MB
Virtual memory: available: 288 015 MB
Virtual memory: in use: 12 996 MB
Office (s) swap file: C:\pagefile.sys
Domain: mydomain.sgn
Logon server: \\MYHOST
Corrections: 25 fixes installed.
[01]: KB2862152
[02]: KB2868626
[03]: KB2876331
[04]: KB2888505
[05]: KB2892074
[06]: KB2893294
[07]: KB2893984
[08]: KB2898785
[09]: KB2898868
[10]: KB2898871
[11]: KB2900986
[12]: KB2901125
[13]: KB2901128
[14]: KB2909210
[15]: KB2909921
[16]: KB2912390
[17]: KB2916036
[18]: KB2919442
[19]: KB2922229
[20]: KB2923392
[21]: KB2925418
[22]: KB2930275
[23]: KB2931358
[24]: KB2931366
[25]: KB2936068
Network cards: 6 interconnect installed.
[01]: Broadcom NetXtreme II 10 GigE (NDIS VB BCM57800
D Client)
Login name: ISCSI
DHCP enabled: no
IP addresses
[01]: 192.168.1.30
[02]: fe80::38c9:e59c:5ac2:e0a1
[02]: Broadcom NetXtreme II 1 GigE (NDIS VBD BCM57800
Customer)
Login name: NIC3
Status: Hardware not present
[03]: Broadcom NetXtreme II 1 GigE (NDIS VBD BCM57800
Customer)
Login name: MGMT
DHCP enabled: no
IP addresses
[01]: 7.48.64.32
[02]: 7.48.64.30
[03]: fe80::f14e:9339:9326:c7fd
[04]: Broadcom NetXtreme II 10 GigE (NDIS VB BCM57810
D Client)
Connection name: SLOT 5 Port 1_swport_VMRepwan
DHCP enabled: Yes
DHCP server: n/a
IP addresses
[05]: Broadcom NetXtreme II 10 GigE (NDIS VB BCM57800
D Client)
Login name: NIC2
Status: Hardware not present
[06]: Broadcom NetXtreme II 10 GigE (NDIS VB BCM57810
D Client)
Connection name: SLOT 5 Port 2_swport_VMOpswan
DHCP enabled: Yes
DHCP server: n/a
IP addresses
Requirements for Hyper-V: A hypervisor has been detected. Characteristics required for
Hyper-V will not appear.
for Microsoft Windows Server 2012 R2 Datacenter x 64
2 Windows8.1 - KB2894856-v2-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
3 Windows8.1 - KB2920189-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
4 Windows8.1 - KB2926765-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
5 Windows8.1 - KB2928120-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
6 Windows8.1 - KB2931358-x 64.msu patch status: ALREADY INSTALLED - JUMP
7 Windows8.1 - KB2931366-x 64.msu patch status: ALREADY INSTALLED - JUMP
8 Windows8.1 - KB2933826-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
9 Windows8.1 - KB2939576-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
10 Windows8.1 - KB2953522-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
11 Windows8.1 - KB2957151-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
12 Windows8.1 - KB2957189-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
13 Windows8.1 - KB2957689-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
14 Windows8.1 - KB2961072-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
15 Windows8.1 - KB2961887-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
16 Windows8.1 - KB2962872-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
17 Windows8.1 - KB2964718-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
18 Windows8.1 - KB2964736-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
19 Windows8.1 - KB2965788-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
20 Windows8.1 - KB2966072-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
21 Windows8.1 - KB2966826-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
22 Windows8.1 - KB2966828-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
23 Windows8.1 - KB2971850-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
24 Windows8.1 - KB2972213-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
25 Windows8.1 - KB2972280-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
26 Windows8.1 - KB2973114-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
27 Windows8.1 - KB2973201-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
28 Windows8.1 - KB2973351-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
29 Windows8.1 - KB2974008-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
30 Windows8.1 - KB2976627-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
31 Windows8.1 - KB2976897-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
32 Windows8.1 - KB2977292-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
33 Windows8.1 - KB2977629-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
34 Windows8.1 - X-KB2978668-64.msu patch status: DO NOT APPLY to THIS COMPUTER
35 Windows8.1 - X-KB2982794-64.msu patch status: DO NOT APPLY to THIS COMPUTER
36 Windows8.1 - KB2982998-v2-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
37 Windows8.1 - X-KB2987107-64.msu patch status: DO NOT APPLY to THIS COMPUTER
38 Windows8.1 - X-KB2987114-64.msu patch status: DO NOT APPLY to THIS COMPUTER
39 Windows8.1 - KB2988948-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
40 Windows8.1 - KB2992611-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
41. Windows8.1 - KB2993651-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
42 Windows8.1 - KB2993958-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
43 Windows8.1 - X-KB3000061-64.msu patch status: DO NOT APPLY to THIS COMPUTER
44 Windows8.1 - X-KB3000483-64.msu patch status: DO NOT APPLY to THIS COMPUTER
45 Windows8.1 - KB3000869-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
46 Windows8.1 - KB3001237-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
47 Windows8.1 - KB3002657-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
48 Windows8.1 - KB3002885-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
49 Windows8.1 - X-KB3003057-64.msu patch status: DO NOT APPLY to THIS COMPUTER
50 Windows8.1 - X-KB3003381-64.msu patch status: DO NOT APPLY to THIS COMPUTER
51 Windows8.1 - KB3003743-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
52 Windows8.1 - X-KB3004150-64.msu patch status: DO NOT APPLY to THIS COMPUTER
53 Windows8.1 - KB3004361-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
54 Windows8.1 - KB3004365-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
55 Windows8.1 - KB3005607-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
56 Windows8.1 - X-KB3006226-64.msu patch status: DO NOT APPLY to THIS COMPUTER
57 Windows8.1 - KB3008923-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
58 Windows8.1 - KB3008925-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
59 Windows8.1 - X-KB3010788-64.msu patch status: DO NOT APPLY to THIS COMPUTER
60 Windows8.1 - KB3011780-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
61. Windows8.1 - KB3013126-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
62 Windows8.1 - KB3013455-v2-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
63. Windows8.1 - KB3014029-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
64 Windows8.1 - KB3018943-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
65 Windows8.1 - KB3019215-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
66. Windows8.1 - KB3019978-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
67 Windows8.1 - KB3020393-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
68 Windows8.1 - KB3021674-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
69 Windows8.1 - KB3021952-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
70 Windows8.1 - KB3023607-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
71. Windows8.1 - KB3036197-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
72. Windows8.1 - KB3021953-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
73. Windows8.1 - KB3022777-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
74 Windows8.1 - X-KB3023266-64.msu patch status: DO NOT APPLY to THIS COMPUTER
75 Windows8.1 - KB3023562-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
76. Windows8.1 - KB3024663-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
77 Windows8.1 - KB3029944-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
78. Windows8.1 - KB3030377-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
79. Windows8.1 - KB3031432-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
80 Windows8.1 - KB3032323-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
81 Windows8.1 - KB3032359-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
82 Windows8.1 - KB3040335-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
83. Windows8.1 - KB3033408-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
84 Windows8.1 - KB3033889-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
85 Windows8.1 - KB3034196-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
86. Windows8.1 - KB3034344-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
87. Windows8.1 - KB3035017-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
88 Windows8.1 - KB3035034-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
89 Windows8.1 - KB3035126-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
90 Windows8.1 - X-KB3035131-64.msu patch status: DO NOT APPLY to THIS COMPUTER
91. Windows8.1 - KB3035132-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
92 Windows8.1 - KB3037634-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
93 Windows8.1 - KB3039066-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
94 Windows8.1 - X-KB3044132-64.msu patch status: DO NOT APPLY to THIS COMPUTER
95 Windows8.1 - KB3046049-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
`~`
the DLLs below. When I used the Add Hardware Wizard to load the .inf, properties of the pilot were "this device cannot start. (Code 10)"
Does anyone have a suggestion?
Thank you
Larry
2 have had any changes made to the computer before the question?
2. do you get an error message or error code when you connect the HDMI cable to the TV?
http://Windows.Microsoft.com/en-CA/Windows7/open-the-hardware-and-devices-Troubleshooter
http://Windows.Microsoft.com/en-CA/Windows/connect-computer-TV#1TC=Windows-7
http://support.Microsoft.com/kb/973687
http://support.Microsoft.com
Welcome to Microsoft answers community forum!
The system update tool:
http://support.Microsoft.com/default.aspx/KB/947821
A software update is available for the Windows Vista installation:
http://support.Microsoft.com/kb/937287
Then download and install Service Pack 2:
http://www.Microsoft.com/downloads/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en
Hope this information helped!
Aziz Nadeem - Microsoft technical support.
Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.
We are in the process of migration of the APEX v3.2.1 on the database 10 g to v4.2.1 on database 11 g. APEX APEX is installed fresh on 11g. I was testing imported and exported of v3.2.1 application in v4.2.1. I was not able to activate the debug mode in the developer bar when the application runs. The url changes, but no debug information appears as was the case in v3.2.1. I see a partial set of debugging information when I open then see the debug window in the bar of developer. This show of debugging is incomplete. By that I mean I don't see not session state change and I don't see any information in the function "wwv_flow.debug".
I read in a thread for an earlier version 4, toggle the debug field in edit application properties and apply, but that no longer works. Something to note is that when the debug field in edit application properties was set to NO, I don't have the error "Debugging is not enabled for this application" when you turn on the debug mode.
I created a zero of application form and debug mode does not work either.
There is a global setting in administration somewhere I should activate to get debug information in the page as in v3.2.1?
Luke
Please post with the information requested here: what to post in the Windows Update forum
Visit our Microsoft answers feedback Forum and let us know what you think.Maybe you are looking for