Change the Source Audio Multicam

Similar Questions

• Remote control Medai vs STR-DN1040 cannot change the source?

  I just installed my Sony STR-DN1040 home theater receiver and have a few questions about the media remote ap...

  (1) I have it all connected and registered and the ap is functional, but in "remote mode", it lists all entries in my (BD, cable/satellite, DVD, FM, etc) as buttons, I can support on and they light up and make a tone of confirmation on my iPhone 4s, but they do not change the source to the receiver.  The rest of the features seem to work and if I use the media remote ap for go to the GUI menu, I can arrow over 'look' and then select a source, and that works fine.  The problem is when you are in another room and want to power on the receiver, then choose an audio source and play without having to turn on the TV or be in this room, you can't (or at least I can't) because the hot-key source on the ap do nothing.  What did I miss?

  (2) I have programeed the 1040's physical remote to control my Samsung Blu - Ray player.  The Medai remote access point can now also control it, or is the 1040's remote physical a completely separate device?

  Thank you!

  Hello Apcrews,

  The STRDN1040 was intended to be used with the Sony 'TV Sideview demand' which includes many new features and replace the existing approx. remote media TV Sideview will will allow you to switch between inputs, however there is no visual feedback in the app, so you'll need visibility on the front panel of the receiver or GUI.

  The application will not work to control your player of Samsung BD. The reason is that you have programmed the 1040's physical remote to control the player of comic book via codes IR (infrared), these codes resident in actual distance rather than the receiver and the orders are sent directly from the 1040's remote control.

• Change the default audio device and the recognition of the application

  I'm new to Vista (home premium w/sp2) and I am confused by works the assignment of default device (control_panel-> sounds), specifically the device change with existing applications (running).

  I change frequently between the speakers and the headphones - however, the change of output device is not recognized by running applications, such as iTunes or Firefox and will not be recognized until I have completely quit and restart the application.

  Why?  It is extremely annoying and incoherent other well educated such as Mac OS X platforms.  I would just like to change the default audio output device, on the fly, without the need to restart applications.

  I do something wrong or Vista offers this functionality to the end user?

  Thank you!

  Hello Wyntr,

  Thank you for using the Microsoft answers Forum.

  Currently, the function of switching between audio output devices is carried out manually. To make the selection, you can click the sound icon in the taskbar, then click the button at the bottom of the volume control Mixer. In the properties of the volume, you can click on devices in the upper left corner and select the appropriate device to make it the default for applications open from then on.

  Let us know if this can help, or if you have additional questions on this subject.

  Judd
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• How to change the source of data in application with the deployment plan

  Hello

  JDev Version: 12.1.3

  I can't change the source data with the deployment plan bc4j.

  Any example on this requirement?

  Thank you

  Anil

  Well, if you take a look at:

  http://Biemond.blogspot.com/2009/04/using-WebLogic-deployment-plan-to.html

  (one of the links in the link you get), you will see Edvin Biemond answwer:

  "you must change the configuration of module of the Application so that it uses a data source. and in the deployment of applications disable deployment of jdbc connection.

  Now you is enough to make the good source of data on each wls and deploy ears. »

  The simplest (and probably the best) way is, as I told you, and you are also mentioned: open up JDeveloper and change declaratively and re-download the ears

• divide the extrusion - and then change the source (such as the font style)

  Hello

  My friend bought the Photoshop CS6 extended and we try to solve something in the 3D environment:

  We did an extrusion "divided" on the text so that we can change a few colors on letters to one and rest another color.
  Then I thought I want to change the font, then I must be able to change the source.

  1. How can I change source when a text is "split extrusion.

  2. is there a way for me to merge the split one and keep my changes of color on the individual letters? How do then?

  Best regards
  NISSE

  Simply, it does not work like that. When you split the extruding you create persistent meshes that can not be edited any more nor the source of the mesh can be changed. You will have to start from scratch.

  Mylenium

• Change the source of the image to the symbol of the instance

  Well, I need a small slideshow of images, the code for the mouse events (click, mouseover, mouseout/mouseouthandler(), etc.), it is the same for all the images, then I create a symbol with an image inside, for this and drag-and - drop instances to the stage, but now I don't know how to change the source of the image of other symbols. The design-time when right click on any symbol instance that modify the symbol it is possible (not instance) and I don't know if it is possible to change the source of the image of any occurrence of code symbol.

  Thank you.

  Your code is just seems to me.

  Did you change the tag for div IMG image?

  By default, Animate inserts div for image tags.

  Below is the screenshot of which you can change the tag after selecting the image on stage

  

• Working with the source audio 5.1

  Can anyone recommend a good resource / tutorial on the use of origin in FCP X 5.1 sound source?

  Scenario: My new camcorder from Panasonic SC-V770K 5.1 surround audio recordings. I found that, in some areas as small theatres the rear channels pick up lots of unwanted noise, echo and the crowd.

  What I would do in FCPX is to adjust the levels of the rear channels down to focus on the audio to the front.

  But all the documents online and tutorials I found describe how to create a new 5.1 mix, not how to edit an existing levels. Surround 5.1 panoramic options are esoteric and not well documented, and all seem to place the existing channels at current levels in new 5.1 investments. Out the sound of the clip in 6 mono channels is slow work and means that I have to adjust separately and filter all the. 'Mono stereo + 2 2' and '3 StΘrΘo' options are not well explained, and if I switch between them I lose all my settings.

  Any help or advice on how to change an existing 5.1 audio track?

  More specific example: how to adjust the levels of the surround channels in a clip with audio 5.1?

  If I change the audio channel of the Mono 6 element I can individually adjust the level of each track, but the surround mix is lost and they are all pan in the Center. I have to manually the value each mono track stereo Pan, pan L/R and set levels. Great for a clip but there is no apparent way to automate this.

  If Pan Mode the Surround video, I can fix the respective rates of mixture and pan toward the Center with Attenuate. It is the closest, I came if they support Centre at the expense of the L/R.

  Is there an easier way to take a track existing 5.1 and say 'just turn this channel up/down '?

• Change the source of entry with the Caps Lock key does not

  It should be possible to change the input source with the Caps Lock key on macOS Sierra.

  and I checked "Toggle ABC of input source with caps lock shift" in system preferences > keyboard > input Source.

  However, it does not lock shift still only works as long as CapsLock

  I tried to reboot, reset the keyboard shortcuts, deactivation of Siri, reset NVRAM and reset the SMC, but still does not.

  I use only the default input source and have not installed and related programs to the keyboard or input source.

  Can anyone help?

  Thanks in advance.

  Greetings slwsbl!

  Thank you for using communities of Apple Support.

  I see that you want to change the input source with the SHIFT key on macOS Sierra. I understand the importance of wanting to use a specific key when changing inputs. I'm happy to help you with this.

  It is possible to do. Please take a look at the User Guide helps Mac, specifically, this section:
  
  

  Switch between input sources

  To switch between input sources, do one of the following:

  • Use the menu entry: Click on the menu entry in the menu bar, and then choose the input source. If an input source is dimmed, the current application does not support it.

  • Use the Caps Lock key: Press the caps lock shift key to switch between a non-Latin input (such as the Chinese or Korean) source and an input source Latin (for example, French or English).

    To use this method, you must select the option "use Caps Lock to toggle to and from" in the stream of input methods. Choose the Apple menu > System Preferences, click keyboard, and then click input methods.

  • Use keyboard shortcuts: Press control-Option-space bar to select the source of the following entry in the menu entry, or control-space to select the previous input source.

  Best regards.

• How can I change the source of history and bookmarks?

  I want to edit the source of history and bookmarks to another PC on the network on firefox 6.0

  You must change the path of the Firefox profile by the method mentioned in this article-

  _ http://KB.mozillazine.org/Thunderbird: _FAQs_:_Changing_Profile_Folder_Location #Modify_profiles.ini_to_point_to_the_new_location_ - _Advanced

  Well, this is an advanced method, it is relatively easier than other methods if you do it right.

• Cannot change the default audio playback device

  Hello

  I tried to get a sound via HDMI, but after hours of trying, each solution is to change the audio playback device by default (in the volume mixer). My PC allow me to do so! It just won't change current default device (digital output Realtech). Can anyone help? It's driving me crazy.

  PC is HP Pavilion Slimline model s5395a. Using Windows 7.

  Thank you, Bill.

  > I don't know much about computers
  Then, it is the question, if you want to change things in the bios.
  You can make changes so that the pc will not start, so be careful. If you don't change anything else, save.

  It is described here:
  http://support.HP.com/us-en/document/c01884922

  You can try some of the other steps first, access to the bios is described before step 10.
  You can 'onboard audio' the value 'Auto', or just turn it off.

  HTH
  C.

• How to change the Source with EditText text in my Script?

  Here is my code, actually, the thing is I want to change my myEditText text in my control panel:

  function myScript(thisObj) {
            function myScript_buildUI(thisObj) {
                      var myPanel = (thisObj instanceof Panel) ? thisObj : new Window("palette", "My Panel Name", [0, 0, 300, 300]);
  
                      res="group{orientation:'column', alignment:['fill', 'fill'], alignChildren:['fill', 'fill'],\
                                myEditText: EditText{text:'EditText text'},\
                                myButton: Button{text:'Button Name'},\
                      }"
  
                      //Add resource string to panel
                      myPanel.grp = myPanel.add(res);
                      
                      
                      var texto = myPanel.grp.myEditText.text.value
                      
                      var btn =  myPanel.grp.myButton
                      
                      
                      
                      btn.onClick = function (){
                          
                          app.project.item(2113).layer("TXT 1").property("Text").property("Source Text").setValue = texto
                          
                          }
                      
                      
                      
                      
  
  
                      //Setup panel sizing and make panel resizable
                      myPanel.layout.layout(true);
                      myPanel.grp.minimumSize = myPanel.grp.size;
                      myPanel.layout.resize();
                      myPanel.onResizing = myPanel.onResize = function () {this.layout.resize();}
  
                      return myPanel;
            }
  
  
            var myScriptPal = myScript_buildUI(thisObj);
  
  
            if ((myScriptPal != null) && (myScriptPal instanceof Window)) {
                      myScriptPal.center();
                      myScriptPal.show();
                      }
            }
  
  
            myScript(this);
  

  Something like this should work:

  function myScript(thisObj) { 
  
    var textStr = "";
  
    function myScript_buildUI(thisObj) {
  
    var myPanel = (thisObj instanceof Panel) ? thisObj : new Window("palette", "My Panel Name", [0, 0, 300, 300]);  
  
    res = "group{orientation:'column', alignment:['fill', 'fill'], alignChildren:['fill', 'fill'],\
    myEditText: EditText{text:'EditText text'},\
    myButton: Button{text:'Button Name'},\
    }"
  
    //Add resource string to panel
    myPanel.grp = myPanel.add(res);
  
    // I added the next two lines.
    textStr = myPanel.grp.myEditText.text;
    myPanel.grp.myEditText.onChange =  myPanel.grp.myEditText.onChanging = textStringUpd;
  
    myPanel.grp.myButton.onClick = function (){
  
    app.project.item(2113).layer("TXT 1").sourceText.setValue(textStr);
    //or tell the script to change the soureText property of the currently selected layer (remove the two slashes from the line below and add them to the line above)
    //app.project.activeItem.selectedLayers[0].sourceText.setValue(textStr);
  
    }
  
    //Setup panel sizing and make panel resizable
    myPanel.layout.layout(true);
    myPanel.grp.minimumSize = myPanel.grp.size;
    myPanel.layout.resize();
    myPanel.onResizing = myPanel.onResize = function () {this.layout.resize();}
  
    return myPanel;
  
    }  
  
    var myScriptPal = myScript_buildUI(thisObj);
  
    // I added this function.
    function textStringUpd() {
  
    textStr = this.text;
  
    }
  
    if ((myScriptPal != null) && (myScriptPal instanceof Window)) {
              myScriptPal.center();
    myScriptPal.show();
    }
    }  
  
  myScript(this);
  

  I've added comments to indicate the changes that I made

• change the source tables in the materialized view

  If I change the name of the source table in a materialized view, I have to delete and recreate the MV? For example, My MV uses a table from a DBlink. Instead I want to physically copy the table in the schema, and then create the MV using the local table, then change MV to use the remote table and I expect to start refreshing the MV for incremental data. Can I do it?

  No, you can't.  Oracle has no way of knowing that the modified table (name) is identical to the original table.

  Hemant K Collette

• Change the "Source name" in animating text

  How to do (or what I can) change the name of 'Source' in the text animation. What clique top nothing happens.

  When a layer is selected in the timeline, all that you have to do is press the Enter key, the keyboard just right above the SHIFT key, and then type a new name. This will rename any layer but will not change the content of a text later. To change the content click twice on the text layer in the timeline panel to select all of the type, and then type new words.

• Change the source file of the insert text with a script

  I'm looking for a way to replace existing-insert text in a document with the contents of another file (by reference), using scripts. I have a document c:\referer.fm, in which there is an insert text which the source file is: c:\A.fm

  I also have c:\B.fm, and now I want to change referer.fm so that is no longer the overlay of text contains the text of A.fm, but the B.fm.

  I tried this:

  var doc is app. ActiveDoc;

  var textinset is doc. FirstTiInDoc;

  var pathtosource is textinset. TiFile;

  pathtosource = "c:\B.fm";

  textinset. UpdateTextInset();

  But it does not work. I guess that the "pathtosource" parameter can be done this way. If someone knows a way to do it, I would greatly appreciate your help!

  David

  Hello David,.

  You do not manipulate the text overlay, but a copy of the file in the text box. Your "pathtosource" parameter is a local copy of the property that you read from the actual text insert.

  Try this code instead:

  var doc is app. ActiveDoc;

  var textinset is doc. FirstTiInDoc;

  textinset. TiFile "c:\\B.fm".

  Note that the backslash must be escaped with the backslash to make it work in a JavaScript string. To make your script Fail-Safe, test the name of file textinset before changing. You do not have the textinset that you expect to have, as might also be INSET text on master pages and reference. All inserts text are in a single linked list.

  Also, update the text tagging along after that changing the path may not always work, as compared to FM, last changed the file date text inset with the last time that the textinset has been updated. To force the FM to update the textinset, you must include the following line of code after changing the filename text inset:

  textinset. LastUpdate = 0;

  Then, you can call the UpdateTextInset() method and it will work.

  Good luck.

  Jang

• How to change the source of mounting clips?

  Hello, I am looking for a way to replace the mounting clips without having to re - manually set the points of entry/exit on the replacement clips.

  I need to replace the clips mounting with clips of a clip from different sources (identical) - but using it in and out of the points.

  Another way to say what I'm doing: for a given element in the editing, change the file reference from one element to another clip in the structure of bin file... to know the new source is identical in every respect.

  I guess it would also work if I could just replace the original clip to the source in some way by another element of the source in my bins of project, in a way that maintains my entry points and (again, the source of the staples are identical and are duplicates in my bins).

  I am very new to the first, so apologies if the answer is obvious for the silverbacks among us... ;-)

  + recognition of 1 brownie points / eternal if someone can be an easy way to do that, while all such clips are offline. I do a lot of work for this project on my trip when I don't have access to the media player. (Travel by bus, it is - don't worry I'm not driving and edition!)

  I think it has changed for CS6, but I could be wrong.  Try the keys Shift + Alt + drag.

  Jeff