Change the Source URI for outbound calls using VCS Expressway X8.2

Similar Questions

• How change the default resolution for windows to use when the monitor is not connected

  Hi, how can I set the resolution by default that windows uses when the monitor is turned off or not connected at all? My problem is that normally I use 1920 x 1080, but when I put the pc to sleep or just turn monitor and leave it like that for a while with a few app maximized, when I get back and turn the monitor on the resolution is correct but the enlarged window is resized to 1024 x 786 resolution. I tried to change in the registry DefaultSettings.XResolution a DefaultSettings.YResolution in all instances and it worked fine for a long time. Then some update that happened and now it no longer works. I reinstalled the system, but it still does not. How can I force windows to use always the 1920 x 1080?

  It seems that TMM disabling did the trick. Maximized windows are not yet moved to the left edge of the screen, well, those who have been maximized is maximized correctly as they should. I had to disable TMM through registry as I had no MMR in Task Scheduler.

  If anoyone is interested I've followed the instructions described here:

  http://superuser.com/questions/120983/how-to-disable-monitor-auto-detection-in-Windows-7

• Where can I see the source code for the controller

  Hi all
  
  My question is maybe stupid to some gurus of the ADF, but many people have found that R12 Pages have a lot of code and there is not too much documentation on how to customize a controller.
  
  1. I see the *.class of my controller in the $JAVA_TOP/oracle/apps/ar/cusstd/createcus/webui/ArCreCusCO.class on my server, BUT I don't see that any of the encrypted code when I open up JDeveloper. So I guess I'm doing it wrong.
  
  2. I want to change ArCreCusCO.class. I see a lot of people say Hey I've customized XYZ controller, but how they found the code and continue to change it is the least of my headaches
  
  3. do I need to configure something in JDeveloper so I can see Server classes to my JDeveloper - what they do, if so, how you do?
  
  4. I saw something in the help page saying adding components to the Extension of the OA the devil what?
  
  Thanks to illuminate some beginners in the ADF.
  
  With the new philosophy of Java, some of those 12 developers experience that we are not starting from zero because of this new architecture.
  
  Hector. -.
  
  p.s. any entry will be taken, but do not refer to the Oracle tutorial, is an example of cake I need some practical examples ;-)

  Hi hbono99

  (1.) you can .class c above java, which is the compiled code as source code is not provided by oracle, if you need this file '.class' to see the source code for decompile, JAD decompiler 1.5.8 version will be newer .well, it would be useful to see the source code, but sometimes decompiled class create problems when trying to compile again.

  2.), you can make changes in the ArCreCusCO.class after that decompilation and compile the same thing again to generate the class file, bcz you can put only class file on the server, BUT that would be fatal to change the standard class and the concept here to come of the Extension in the image, you need to extend this class. «XYZ custom "means the extesión of the class parent and make the extension u don't need not the source.»

  3.) u cannot see the source code of a .class in Jdeveloper, there is no such a parameter.

  (4.) to extend the need to ArCreCusCO.class you to create a workspace followed by creating a project in the workspace Jdeveloper
  process to extend the class

  a.) create workspace and project
  (b) create the same package in which resides the ArCreCusCO.class under the \jdev\myprojects\ in your Jdeveloper
  (c.) right click on the project, go to create the new class, here you will find the option to metion the package where you want to put the superior (normal package starts with a xx.oracle.-) the possibility of mentioning the nmae classs that you want to extend
  (d.) click ok at the end, you will get your extended class

  e.) source code usually has two methods ProcessFormRequest and processRequest, you can add the code according to the requirement.

  extension works bcz inside the method she calls super, so all first it runs all the methods of the parent class in your case ArCreCusCO.class and then control comes in extended class, now, your code will be run, which will be accomliseh your condition

  f.) tranaser the class file file expanded to the server, add this extended class with seeded page you need to customize the page, you will find the option to add your class, mention u your class with package to compete (the way that we import the file with their package names in our source code, here import is not necessary)

  thanx

  Pratap

• Change the default DPI for scanning in paint

  How can I change the default values for scanning for painting so that each scan is 300 dpi?

  I'll give you an answer. What the interrogator does not understand, is that MS Paint does not have a setting for the CIO. There is no default DPI setting in MS Paint. The setting is controlled by the scanner driver or scanner itself. MS Paint simply communicates with the driver for the scanner, which then continues to do the analysis, then once completed, he hands the digitized data back to MS Paint. Therefore, the parameters of the interrogator wants to know how to change are not in MS Paint. they are in the driver scanning interface. This driver determines how he manages the parameters after returning the scanned data to the connection/disconnection of call program, in this case MS Paint. Most of the drivers scan all right back to their default value. In the case of the user, it's 100 dpi, but another scanner, this could be 150dpi (common with many scanners a few years back), and by default most recent scanners often at 200 dpi. After scanning, you need to change the defaults anywhere from new, because once the scanner driver handed the scan back data to the calling program, it is no longer in communication with her. It doesn't matter whether you use MS Paint, Picasa, IrfanView, or any other program that connects to the scanner TWAIN. If you start with a scanner that has a default of 300 dpi, you would have thought that it was a question on. You can not insistent that no one answered your question if it is based on the wrong premise at first.

  Some scanners allow control of the scanner itself. I use a HP (all-in-One) printer/scanner combination. I can configure default to the control panel of the printer/scanner at 300 dpi or whatever value I want; I often put it at 600 dpi. Then I can scan directly from the scanner/printer and still get 300/600 dpi scans. By default the program to manage the registered file type determines which program will be executed when the image is sent to the computer. It could be MS Paint or IrfanView or whatever. Very often, I send the scans on a SD card on the printer instead. When I'm finished, I have a SD card with images scanned at 300 dpi that I take to another computer. Because the scanner/printer has been set to use 300 dpi by default, MS Paint, IrfanView or any other program that launches a scan will get also 300 dpi scans.

  What the questioner needs is a scanner which allows its default value to or one that is default to 300 dpi in a first time. If you try a new scanner, you will find that the parameters does not return to 100 dpi, but instead has regardless of the definition of the scanner as default.

  Given that most of the pilots to simple scanner always return to the default devices, and in this case, setting this parameter scanner is only 100 dpi, you can use a software that is specially designed to solve this program with its own resolution settings. An example is called "search". In its interface, you choose what the desired resolution, then when it communicates with the scanner, he deals with the change in the value whenever a scan is requested.

  If you use color or grayscale is a separate choice outside the DPI setting. Some scanners can scan to a different resolution for shades of gray than they do for the color. Nevertheless, the problem and the solution is the same.

• Changing the default settings for printing in Office Picture Manager

  Anyone know how to change the default setting for printing in Office Picture Manager?

  I have a user who clams that when they try photo printing settings in Office Picture Manager has been configured to print bac2 and paper 4 x 6.  Now when it prints, it must use the drop-down list boxes to tell it to print from bac2 and paper 4 x 6.
  I changed the default settings of the printer to print from the bac2 and use paper 4 x 6, but they must still use the drop-down list boxes in Picture Manager.
  Thank you!

  Although I maded the changes to the properties of the Windows printer I had to do that to solve the problem.

  To solve the problem:

  1. once in the print of the image window there is a link 'Options '.... "at the bottom right.

  2. once it's a click a print settings window that opens there. You will need to click on the link 'printer properties '.

  3. now the printer Document Properties window appears. Change of Source paper and media here.

  4. click on the OK button and now it's good to go.

• Remote control Medai vs STR-DN1040 cannot change the source?

  I just installed my Sony STR-DN1040 home theater receiver and have a few questions about the media remote ap...

  (1) I have it all connected and registered and the ap is functional, but in "remote mode", it lists all entries in my (BD, cable/satellite, DVD, FM, etc) as buttons, I can support on and they light up and make a tone of confirmation on my iPhone 4s, but they do not change the source to the receiver.  The rest of the features seem to work and if I use the media remote ap for go to the GUI menu, I can arrow over 'look' and then select a source, and that works fine.  The problem is when you are in another room and want to power on the receiver, then choose an audio source and play without having to turn on the TV or be in this room, you can't (or at least I can't) because the hot-key source on the ap do nothing.  What did I miss?

  (2) I have programeed the 1040's physical remote to control my Samsung Blu - Ray player.  The Medai remote access point can now also control it, or is the 1040's remote physical a completely separate device?

  Thank you!

  Hello Apcrews,

  The STRDN1040 was intended to be used with the Sony 'TV Sideview demand' which includes many new features and replace the existing approx. remote media TV Sideview will will allow you to switch between inputs, however there is no visual feedback in the app, so you'll need visibility on the front panel of the receiver or GUI.

  The application will not work to control your player of Samsung BD. The reason is that you have programmed the 1040's physical remote to control the player of comic book via codes IR (infrared), these codes resident in actual distance rather than the receiver and the orders are sent directly from the 1040's remote control.

• I am not able to change the video quality for you tube. There are only two options 360 and Auto. Please help me.

  Hi I am experiencing strange problem for 15 to 20 days and I am not able to change the video quality for you tube. There are only two options 360 and Auto. Help me please if you can because I have a slow internet connection and I want to play video at 240, as it was before. Thanks in advance for your help.

  Could check you whether YouTube is to serve its HTML5 player or the player based on Flash? If you right click on the drive, short a context menu should appear. If the full Firefox context menu is displayed, press and release the ALT key to erase that. The last line of the menu short usually indicates which player he is.

  I'll assume HTML5 because...

  On Windows 7, Firefox should show a wide range of formats in the HTML5 player. However, if some of the features of media are disabled, preventing video MP4 decoding, then YouTube offers only 360 p (with WebM coding).

  If you have intentionally disabled Media Foundation and/or DirectShow in topic: config, then perhaps you would prefer to use the YouTube Flash Player? There are a few Add-ons that can force YouTube to serve you a Flash drive. Either of them will do, you don't need both:

  • https://addons.Mozilla.org/firefox/addon/YouTube-Flash-video-player/
  • https://addons.Mozilla.org/firefox/addon/YouTube-Flash-Player/

• I want to change the default printer for Firefox how can I do this?

  When I choose to print in Firefox it uses my printer copier not my default printer. So how can I change the default printer for Firefox?

  In Firefox 'by default' is the last used printer. If you switch to a different printer, Firefox to remember that a new 'default' - unless you have disabled this setting in all: config. Print.save_print_settings

• How can I change the default zoom for the new tab only?

  The new tab in Firefox 33 zoom is too high to see all 12 of my thumb nail. I changed it using ctrl - but the next time I opened a new tab, the zoom is 100%. How can I change the default zoom for the new tab only?

  I posted a style rule to shrink the tiles, which allows several of them on the page, but naturally reduces their legibility. You can experiment with the dimensions to find a look that works for you.

  https://userstyles.org/styles/106326/shrink-new-tab-thumbnails

  I use the Stylish extension to experiment because of its preview function that allows me to see the effect quickly. You can install it from the site of modules, then after restart of Firefox while searching for his "S" icon in the toolbar to manage Styles so you can edit and experiment.

  https://addons.Mozilla.org/firefox/addon/stylish/

• How can I change the default language for the spell checker? -solved, somehow...

  As the previous thread was closed without a real resolution - https://support.mozilla.org/en-US/questions/941350?esab=a & s = & r = 0 & as = s

  I managed to solve this problem on my end by reinstalling just firefox using the location of the language of the dictionary by default that I wanted to leave here - http://www.mozilla.org/en-US/firefox/all/

  A shame that the main download page does not select the relevant location for you and still more for changing the default language for the spell checker built is so much kak. Well.

  Right-click web page

  • [x] check spelling

  Language > choose language for spell check...

• How to change the audio output for the metronome

  Hello

  I would like to send the metronome (and speech signals) for monitors to the scene in the ear.

  I understand that I can do this in MainStage using different output for the above titles vs. the rest of the 'Concert '.

  I tried to follow the instructions of the Manual:

  Change the audio output for the sound of the metronome

  1. Choose the MainStage > Preferences > General.
  2. In the section of metronome on the general tab, choose another audio output on the shortcut menu to exit.

  PROBLEM

  1. on the general tab, only the outputs 1-2 are available/selectable (likely, these are also by default for all "Concert")

  2. Why is this process in the manual if it is not executable (without doing something to another additional Set up)?

  3. it's probably among the requirements of setting up more critical even easier for using MainStage with a live band, so why am I having to ask for help at all!

  Rant on (its been a long day)

  Grateful for any help to solve cela. I guess I can send the metronome (such as a click track) and speech signals on the same outputs, which are separated from the rest of the Concert... or should I change the outputs on the other tracks and keep the outputs 1-2 for the metronome marks / voice?

  Thanks in advance for all advice and my apologies for my frustration. JM

  To access the output audio, you need an audio interface with several outputs.

• How can I change the filter settings for the e-mail account of my child?

  How can I change the filter settings for the e-mail account of my child?

  Hi Schaefle,

  May I know if you refer to web filtering? If Yes please visit this link to learn how to change the filter settings.

  Note: for to work in web filtering settings, you must install and configure the filter of family security on each computer your child uses.

  For more information on parental controls, please visit http://windows.microsoft.com/en-US/windows-live/essentials-help-center

  Thank you!

• How to change the default path for documents and settings

  How to change the default path for documents and settings

  I try to change in the registry, but the profile can create but error! had no choice to change the default path % lecteur_systeme % d: /.

  Hello

  I suggest you to download TweakUI, this could help you or get you headed in the right direction
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-XP

  Also this KB could help as well:
  http://support.Microsoft.com/kb/236621

  It will be useful.

• How to change the product key for Office 2007?

  Original title: product key used.

  When I loaded Office 2007 I used a product key with any additional use.  I try to enter a different product key, but impossible to find how to do this.  Can you please direct me to the correct site to do this?  Thank you!

  Hello

  It would be easier to uninstall it and then reinstall it by using the different product key.

  How to change the product key for Office XP, Office 2003 and for Office system 2007" http://support.Microsoft.com/kb/895456 http://www.mydigitallife.info/how-to-reset-or-change-Microsoft-Office-2007-product-license-key-or-volume-license-key-VLK/ See you soon.

• Change the default format for burning discs of this system active files in the ISO image format

  How can I change the default format for burning discs of this system of active files to ISO image format?  I don't want the active file as the default system and really don't want to have to choose what I want to use the default every time.  It's boring. I have Vista x 64 on my computer and have not yet adapted to all the changes in XP.

  Thanks, but it's not useful.  It is more that an 'improvement' Microsoft did that, as I fear, is a total and far failure to be an improvement.  It also means that I'll just use a 3rd party program to burn all my CD/DVDs.  You know if I wanted to be able to remove, reformat, etc.. CD/DVD I would use those rewritable.  That's why they exist.