Change the syslog port

Similar Questions

• How to change the infrared port on Satellite M30 to be IrDA to be direct IR?

  Hello world

  I just bought a new watch that should be able to communicate with a pc via the infrared port (it's the Polar S710).
  Unfortunately, it does not work as the 'Protocol' of the watch is directIR, rather than be IrDA, as is my cell phone.

  I saw somewhere that it would be possible to change the infrared port of my laptop in order to operate in directIR. Anyone know the procedure? I think I could change something directly in the driver, but I did not how to deal with.

  I would be very grateful if someone could help me.

  Thank you
  SEB

  Hello

  I think that it of not possible to change the IrDA Protocol on the laptop.
  But have you tried to update the software polar?
  Consult the manufacturing site:
  http://support.polar.fi/PKBSupport.nsf/library?OpenForm

  If this does not help I think that only and an external solution as USB-> DirectIR dongle help

• change the com port assigned to the fax and scan

  I used fax and scanning for once.  I had to move my external modem to a different port.

  I don't know how to change the windows fax and scan com port manually.

  the wizard does NOT start, I guess because the fax is installed and worked until I had to change the number of COM port...  I need to change the number of pot with hundreds of research, it seems that no one knows how to change manually the Compote in windows fax and scan, unless they use the wizard.

  my assistant does not start. I guess I'm 'old school' I don't need an Assistant, I need to manually change the fax uses com port.

  :-), it's frustrating because help said only: click "fax" in the lower left corner, and they all assume the installation wizard starts and everything will be fine. :-(

  the wizard does not start. :-(

  I am desperate to get my fax work and need to know how to set the correct port number in a system that is installed and running, such as the wizard never starts.

  for anyone who goes out at the end of questions and ideas, I have a fax application stand alone who is working with the new port setting. It's just not a good app for my needs

  Please?

  Thank you

  John

  Post proposed by the moderator of the appropriate forum category

  Hi John,.

  You can follow the steps below to change the COM port for a modem:

  1. search the Device Manager.

  2 look for the Modem device, right-click on it, and then click Properties.

  • If the change settings button is present, you must click on it to make changes to the appliance. If the user account control dialog box appears, confirm that the displayed action corresponds to what you want, and then click continue.
  • If the change settings button is not present, the modem does not support the ability to change the modem settings. Refer to the documentation provided by the vendor of your modem.

  3. on the Advanced tab, click Advanced port settings.

  • If this option is not displayed, the modem does not support the ability to change the assigned COM port. Refer to the documentation provided by the vendor of your modem.

  If the same persists, we suggest that you post your query in Microsoft TechNet so that their support team will provide you in-depth assistance.

  Kind regards.

• Change the listening port for SSH on IDS

  Should what command I use to change the listening port on an IDS 4200 series? I listen on another port, and when I applied the S189/S190 update, it changed SSH port 22.

  Just out of curiosity, too, no one knows what else S189/S190 updates change?

  Thank you

  Jim

  Cisco supports only configurations using the CLI interface. The ssh port cannot be changed through the CLI. Modifying the files in config system via the service account is not a good idea and not supported.

• Where can I find the ability to change the com port settings in Windows 7

  Where can I find the ability to change the com port settings in Windows 7

  Port, Device Manager, select comport, right click, properties, Port settings

• Change the default ports for http and https

  Hello

  I'm trying to change the default ports for http and https

  I have a 506th PIX (which does NOT of NAT)

  I have the following: -.

  static (inside, outside) tcp 192.168.10.2 601 192.168.10.2 http netmask 255.255.255.255 0 0

  static (inside, outside) tcp 192.168.10.2 602 192.168.10.2 443 netmask 255.255.255.255 0 0

  access-list acl permit tcp any 192.168.10.2 eq 601

  access-list acl permit tcp any 192.168.10.2 eq 602

  Access-group acl in interface outside

  where 601 and 602 are the http port and https to be redirect to respectively.

  I changed the webserver accordingly

  I get the error message

  "No group of translation not found for tcp src outside:189.x.x.x/50232 dst inside:192.x.x.x/80" (trying to access port 80)

  "I also have ' fixup protocol http 601.

  I had access to the internal and external web server before attempting to change the default ports

  Any ideas where I'm wrong?

  See you soon.

  I apologise for not thinking correctly.

  the static method must be:

  static (inside, outside) tcp 192.168.10.2 80 192.168.10.2 601 netmask 255.255.255.255 0 0

  static (inside, outside) 192.168.10.2 tcp 443 192.168.10.2 602 netmask 255.255.255.255 0 0

• How to change the rmi port in atg

  Hi guys,.

  How to change the rmi port in atg

  who is the component to change port rmi in atg?

  The rmi port is defined in the component/atg/dynamo/Configuration. so in this Configuration.properties, you can change the value of the rmi port.

• Change the default port

  Can someone point me to a document that describes the steps to change the default port (8080) to another port on an existing Foglight environment?

  The Foglight Management Server (FMS) port is configured in FMSHOME/config/server.config:

  # These options are required, they must be configured for the server starts

  #

  Server.http.port = "8080";

  Server.HTTPS.port = "8443";

  You can change them by modifying the config file and restart the FMS.

  BUT:

  Remember that all Management Agent Foglight (FglAMs) use this port to send data to the FMS.

  Foglight users may have bookmarked FMS URLs with the original port number.

  Under Unix, a process must have permissions root a low numbered path (if you thought to change port 80)

  To make the seemless transition, you should consider implementing some sort of system (for example with an Apache web server) port forwarding so that agents and users who use the original port will not break.

  Kind regards

  Brian Wheeldon

• Change the listening port

  I am running Oracle 10.2 on Solaris. I want to change the listening port of 1521 to 2690. I've read that I'm supposed to change /opt/oracle/product/10.2.0/db_1/network/admin/listener.ora and restart the receiver. Here's my listener.ora:
  
  OPENVIEWLISTENER =
  (DESCRIPTION =
  (ADDRESS_LIST =
  ((ADDRESS = (PROTOCOL = tcp (PORT = 2690))(HOST=flare)))
  SID_LIST_OPENVIEWLISTENER =
  (SID_LIST =
  (SID_DESC =
  (GLOBAL_DBNAME = openview)
  (ORACLE_HOME=/opt/oracle/product/10.2.0/db_1)
  (SID_NAME = OpenView))
  )
  
  
  After the reboot, it is still the 1521:
  
  bash-beginning of lsnrctl $ 3.00
  
  LSNRCTL for Solaris: Version 10.2.0.1.0 - Production on 24-AUG-2008 16:53:33
  
  Copyright (c) 1991, 2005, Oracle. All rights reserved.
  
  From /opt/oracle/product/10.2.0/db_1/bin/tnslsnr: Please wait...
  
  TNSLSNR for Solaris: Version 10.2.0.1.0 - Production
  System settings file is /opt/oracle/product/10.2.0/db_1/network/admin/listener.ora
  Log messages written to /opt/oracle/product/10.2.0/db_1/network/log/listener.log
  Listen on: (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=flare.halcyoninc.com) (PORT = 1521)))
  
  Connection to (ADDRESS = (PROTOCOL = tcp)(HOST=) (PORT = 1521))
  STATUS of the LISTENER
  -----
  Alias LISTENER
  For Solaris TNSLSNR version: Version 10.2.0.1.0 - Production
  Departure date 24-AUG-2008 16:53:34
  Uptime 0 days 0 h 0 min 0 sec
  Draw level off
  Security ON: OS Local Authentication
  SNMP OFF
  Parameter Listener of the /opt/oracle/product/10.2.0/db_1/network/admin/listener.ora file
  The listener log file /opt/Oracle/product/10.2.0/Db_1/network/log/listener.log
  Summary of endpoints listening...
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=flare.halcyoninc.com) (PORT = 1521)))
  The listener supports no services
  The command completed successfully
  
  What I am doing wrong? :(
  
  

  user527462 wrote:
  I am running Oracle 10.2 on Solaris. I want to change the listening port of 1521 to 2690. I've read that I'm supposed to change /opt/oracle/product/10.2.0/db_1/network/admin/listener.ora and restart the receiver. Here's my listener.ora:

  OPENVIEWLISTENER =
  (DESCRIPTION =
  (ADDRESS_LIST =
  ((ADDRESS = (PROTOCOL = tcp (PORT = 2690))(HOST=flare)))
  SID_LIST_OPENVIEWLISTENER =
  (SID_LIST =
  (SID_DESC =
  (GLOBAL_DBNAME = openview)
  (ORACLE_HOME=/opt/oracle/product/10.2.0/db_1)
  (SID_NAME = OpenView))
  )

  After the reboot, it is still the 1521:

  bash-beginning of lsnrctl $ 3.00

  LSNRCTL for Solaris: Version 10.2.0.1.0 - Production on 24-AUG-2008 16:53:33

  Copyright (c) 1991, 2005, Oracle. All rights reserved.

  From /opt/oracle/product/10.2.0/db_1/bin/tnslsnr: Please wait...

  TNSLSNR for Solaris: Version 10.2.0.1.0 - Production
  System settings file is /opt/oracle/product/10.2.0/db_1/network/admin/listener.ora
  Log messages written to /opt/oracle/product/10.2.0/db_1/network/log/listener.log
  Listen on: (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=flare.halcyoninc.com) (PORT = 1521)))

  Connection to (ADDRESS = (PROTOCOL = tcp)(HOST=) (PORT = 1521))
  STATUS of the LISTENER
  -----
  Alias LISTENER
  For Solaris TNSLSNR version: Version 10.2.0.1.0 - Production
  Departure date 24-AUG-2008 16:53:34
  Uptime 0 days 0 h 0 min 0 sec
  Draw level off
  Security ON: OS Local Authentication
  SNMP OFF
  Parameter Listener of the /opt/oracle/product/10.2.0/db_1/network/admin/listener.ora file
  The listener log file /opt/Oracle/product/10.2.0/Db_1/network/log/listener.log
  Summary of endpoints listening...
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=flare.halcyoninc.com) (PORT = 1521)))
  The listener supports no services
  The command completed successfully

  What I am doing wrong? :(

  Your listener.ora sets a listener named OPENVIEWLISTENER. You have not specified the name of the listener when starting it and so he went with the default values (name of the LISTENER listener and so on). The command you are looking for is lsnrctl start OPENVIEWLISTENER

  concerning

  Niall Litchfield
  http://www.orawin.info/

• How can I change the default port 443 on Windows Server Essentials 2012?

  I'm trying to install on my server remote access, but port 443 is already in use with another server on the same configuration broadband, so I need to change to allow access.

  Also, what should I change on the computers to connect to this port

  Concerning
  Steve

  Hello

  Welcome to the Microsoft community forums!

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/winserveressentials/threads

  
  If you need to change the port for remote access,

  You can search on a lot after u come and change port 443

  
  http://social.technet.Microsoft.com/forums/en-us/winserverTS/threads
   
   
  Hope this information helps.

• Need to change the com port number, but users do not have administrator rights

  Our users don't have administrator rights, however, there are a few pieces of software that communicates with the hardware using COM ports.  Since they don't have administrator rights, you may not click on advanced in the communications port to set the port to the necessary com com.

  I found reg hacks online that say will open the advanced screen to allow the com to be changed, but none that I've found work successfully.

  Can someone tell me the correct registry setting that I need to grant permission to in order to open the advanced under properties tro communications button and have the available com port number to change.

  Thanks in advance.

  Hello

  You have the computer connected to a network or domain?

  It is not possible to access advanced screen or advanced without administrator rights. I suggest you to contact the administrator of the system to help about it.

• Can I change the server port, but Windows Mail continues to change at 25

  I can get my outgoing mail working by changing the port from 25 to 587, but whenever I close the Windows Mail application and re-open it, it comes back to port 25 (and will not work). Thanks for the help!

  You should always back up when you use a Microsoft product.  Your hard drive may die too.  But deleting the e-mail account does not delete messages, and repair the database will not ruin it.  I have not had one person complaining about this program (WMUtil) except for one person who said their antivirus software falsely reported that the file is infected (it was not).

  Steve

• Device's built-in FTP Explorer: change the target port?

  I have a simple NAS server that I like to use at school, but my router messes up when I try to open the default FTP port, which is 21, so I need to change the port.

  To access the NAS I use the built-in functionality of Windows Explorer FTP because I can't run a FTP program.

  The thing is, just now I managed to access the server without fault, but our router keeps closing the port, while it is properly set up now.

  Now my question is, when I enter ftp://sitenamehere in the search bar of Windows Explorer, can I specify which port to use?

  Obviously, I could continue with the purchase of a new router, but I don't have the funds for it right now.

  Help to alleviate this will be great.

  Thanks in advance for reading.

  ****.

  Just found out there is a problem with the server itself.

  The port is closed because the router sees not the server as an active device as I run it in safe mode.

  Seems I have to find a solution for this. Damn.

• How to change the http port in EBS 12.1.3

  Hi all.

  I configured App & DB to use the port 9 pool during cloning.

  For some reasones, I need to change the port http request 8008 to 8,000, but DB port must remain 1529.

  If I may continue the document: https://support.oracle.com/epmos/faces/DocContentDisplay?id=760590.1 ? My version of the EBS is 12.1.3.

  So I need only change my CONTEXT.xml lines (as in the example below) and run the automatic configuration on the Application layer? :

  < web_port oa_var = "s_webport" oa_type = "PORT" base = "8000" step = range "1" = "-1" label = "Web listening Port" > 8000 < / web_port >

  < activewebport oa_var = "s_active_webport" oa_type = "DUP_PORT" base = "8000" step = range "1" = "-1" label = "Active Web Port" > 8000 < / activewebport >

  < login_page oa_var = "s_login_page" > http://myhost.Oracle.com:8000/OA_HTML/AppsLogin < / login_page >

  < chronosURL oa_var = "s_chronosURL" > http://myhost.Oracle.com:8000/oracle_smp_chronos/oracle_smp_chronos_sdk.gif < / chronosURL >

  < oa_var = "s_endUserMonitoringURL" > http://myhost.Oracle.com:8000/oracle_smp_chronos/oracle_smp_chronos_sdk.gif < / EndUserMonitoringURL >

  < externURL oa_var = "s_external_url" > http://myhost.Oracle.com:8000 < / externURL >

  < httplistenparameter = "s_http_listen_parameter" > 8000 oa_var < / httplistenparameter >

  Thanks in advance.

  Hello

  The approach that you mentioned is correct.

  The document that you referenced is to follow in this case.

  Kind regards

  Bashar

• After the upgrade to 6, security server does not change the listening Port

  Came across a weird situation where after upgrading a server security 6.1.0 - 2509221, it does not change the listening SSL port during the upgrade, it was not on the standard SSL port.

  It was initially configured to listen on 444 before the upgrade, after the upgrade, I tried to go back to 443 and a netstat-ban shows that it is listening on port 444.

  I double checked the config.properties file and there is no entry for serverPort, and configuration shows 443 in the admin View handler.

  -Re-apply the configuration via the web page does no change, always tuned to 444.

  -Don't restart the service of security server no change, still plays on 444.

  -Restart of the server, no change, still plays on 444.

  -Statically placed serverPort = 443 in the config.properties, always tuned to 444.

  All ports are verified open, 443, 444 and so I think I could have hit a bug. Someone else has security servers that listen on non-standard ports SSL?

  A complete reinstallation of the Security server is provided, changing the port to listen 443, shouldn't have to do that well.

  You checked config.properties, but did you check in locked.properties for the port setting see if it's been moved there before and during the upgrade? Locked.Properties replaces all the configuration settings.