Change the two Parents Frame

Similar Questions

• change the timecode of frames in seconds?

  For the life of me I can't figure out how to change the timecode of frames in seconds someone can please give me a pointer. I've been using a calculator and I'm on a demo too. Not sure if it would make a difference

  Cmnd/CTRL + click on the display in the timeline panel.

• Change the number of frames per second

  It's very simple stuff - so I hope I'm missing an obvious answer... that is.

  I have an animation that goes 15 seconds and 16 fps. Total of 240 frames.

  I want to change to 15 seconds at 30 frames per second. A total of 450 executives.

  Is it possible to do - that will keep all the keyframes in relative place? Or I have to recreate the test specimen at 450 and pass each unique to his new position keyframe?

  Thank you for your help.

  T

  Unfortunately, no, you can't do that and keep the same length. You CAN change the frame rate, but increase the rate of 30 frames per second will make the scene twice as long because are presented twice as many images per second.

• Is it possible to change the bookmark parent of an existing favorite using Javascript?

  Anyone know if it is possible to change the parent of an existing bookmark bookmark, or the property of 'parent' is read-only?

  Also my understanding is that the parent property can be set to the new bookmarks, is that correct?

  Thank you very much. HJ

  You can probably use just "move": http://jongware.mit.edu/idcsjs5.5/pc_Bookmark.html#move

• change the ration of Frame Width Height of a Quicktime or other format

  I have a clip of 720 x 480 pixels.  I want to scrunch it to 720 x 200 how to create something this size?  I can't figure out how to change the ratio of ht/wid.

  Thank you, - bill

  Here's one way in CS4

  Create a new sequence with the right size 720 x 200

  

  then place your film in this timeline and select your video and sequences in the control panal effects make you "Uniform scale" is not checked, and then change the height of scale about 42 or whatever you want.

  

  If you have CS3 then you must start your project with your 700 x 200 to start with.

  Is that what you want?  It it scrunch

  Glenn

• Windows XP and Windows Vista updates-updates to update changes the two? __Updates is the Vista mess up to my desktop (Windows XP)

  I tried to update Internet Explorer 7 to IE 8 in Windows Vista (wireless), but when I do it will also update my Windows XP to IE 8. Windows XP can't handle the update and it mess.
  Why is that when I do updates on my wireless laptop my office is also updated?

  Hello Internet Explorer 8 is compatible with Windows Vista and Windows 7. Updates usually for IE8 are pushed for Vista and XP at the same time.

  Can you provide us with information as to what is happening exactly? You receive error messages?

  Let us know,

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to change the inner traits of two circles that overlap?

  Hello

  I have two circles that overlap with 2px solid feature. Now, I would change the two parts of the circles that are now in the circles of a dashed line. Something like this:

  

  But it only creates parts mode dotted lines. Here, I used the Pathfinder "gap".

  How can I do this correctly?

  Thanks for the tips!

  Luftikus,

  You can:

  (1) create two circles;

  (2) copy the circles and the Pathfinder > intersect copies;

  (3) select the original and unit of Pathfinder (or add to the box or whatever it is called in your version of form);

  ((4) select the path of the intersect 2) and apply the dashboard.

  This will give you the paths intersect in front and United in the back.

  The problem with the initial attempt to fracture that is filling the central aisle only leathers / covers half of the race of the external paths (because the fill extends to the center of the race). By having one United way in the background there is no line to hide cover. Pathfinder > unit or other after Parthfinder > fracture / can only provoke a group and fail to unite the two paths into one.

  (You may need to keep Alt/Option 2) and 3) depending on the version.

• Change the codec for a multicam project

  Hi all

  I have a situation with which I hope you all can help.  I have AVC-INTRA 100 720 p 60 sequences of three cameras recorded on P2 cards that I placed by mistake on a sequence of 720 p 60 DVCPROHD.  I then nested this sequence inside another sequence of 720 p 60 DVCPROHD I can modify multicam all cameras.  After completing the project, I had this time "duh" when I realized it was actually AVC-INTRA 100 feet and not the DVCPROHD footage.  Now I'm wondering how to change the two sequences for the correct codec.

  So I know that I can simply create a new sequence of AVC-INTRA 100, copy the entire contents of sequence 2 (my multicam activated sequence with all editions) and paste it into the new sequence of AVC-INTRA 100.  The question I have, is that it contains a sequence of nested for multicam editing, and the nest is pointing to the original sequence with the images from three cameras isn't always properly in a sequence DVCPROHD.  So, I'm wondering how to get the change codec in AVC - INTRA 100 for the sequence with the images from three cameras, can tell the nested sequence to now point to the correct location?

  God, I hope I explained that clearly.  As always, thanks in advance for the help.

  Mike Tomei

  Well, do you feel lucky, punk? Make a backup of your project before you file try this... and I make no guarantee that it works, although in my test, it has done.

  Open your database project in a text editor; I like Notepad ++. Premiere Pro project files are more than XML documents, so we can decipher some of them and tweak it to do what we want. In the first place, what I list below is the line you're looking for, and the second, the line you want to replace it with.

  Here we go...

  1920,1440
  1,1
  
  0,0,960,720
  0,0,1280,720
  
  960
  1280
  
  1345473880
  1297106761
  
  1685483063
  1297107278
  
  EncoderPresets\SequencePreview\079a6181-acbf-4a6f-b1f2-fb44555a69e0\P2 720p 60Hz DVCPROHD.epr
  EncoderPresets\SequencePreview\cf2f7860-0e56-444f-a64f-74eafec54e44\I-Frame Only MPEG.epr
  
  079a6181-acbf-4a6f-b1f2-fb44555a69e0
  cf2f7860-0e56-444f-a64f-74eafec54e44
  

  It expected to do so. Once again, simply search for the first string in each group and replace it with the second; You can do this massively if you don't really have anything else that change made the multicam. What it should do is changing the size of the frame in the sequence (the first two), because DVCPRO HD is anamorphic and AVC-Intra is full-raster and then the latest re - configure the editing mode and preview of codec. It is a relatively simple change, since you are sticking to the same rate - which would be a more complicated way and probably break of the project folder. I think it will work, however.

  If it works... I love dark beers

• Change/Remove primary parent

  Hello

  I need to change the primary parent on behalf of Microsoft family safety from one parent to another parent.

  How can this be accomplished?

  Thank you

  Arlo

  Hello

  To change the primary parent account that is associated with your child's account, you need to remove the primary parent. This will remove all restriction settings you requested to your child. After removing the primary parent, you will need to restore on behalf of the child under the new primary parent and the installer restriction again. To do this, please follow the steps below:

  1. go to https://familysafety.microsoft.com and sign up using the primary parent account.

  2. after accessing it, you will see the main page and a list of family members who are associated with the account main parent. Click manage the list of the members of the family , this option is next to make a family member, a parent.

  3. on this page, you can remove the Member who is under your account. You can also remove the primary parent by clicking on the checkbox next to the name of the main account.

  4. Once you have chosen, all members that are related to your account will be also included.

  5. click on the Remove button and confirm the operation.

  Once this has been done, you will have to restore on behalf of the child under the new primary parent account. To do this, please follow the steps below:

  Add/Re-adding a child (with a Microsoft account) for parental control in Windows 8

  In Windows 8, you can use accounts of Microsoft as a user. You just link the Microsoft e-mail account to the new standard user. Follow these steps:

  Note: Make sure that you have an internet connection to create a user with a Microsoft account.

  1. press Windows key on your keyboard to access the applications screen.

  2. tap create an account (you will be redirected to search application screen automatically).

  3. click on settings (second option with the gear icon).

  4. click on create an account on the selection to the left pane. (You may be prompted for access admin select an admin user, and then enter the administrator password).

  5. in the account management window, click Add a user account.

  6. you will be prompted to add a user, enter the Microsoft account email address in the text box then click on Next.

  7. check This is a child account? Turn on family safety for PC usage reports.

  8. click on Finish.

  After you create the child account, you can then go to the Family Safety website, log in using the parent account and then manage restrictions and control of your child options.

  Let us know the result later.

  Thank you.

• Windows 7 changes the resolution of the screen at the start of what I had saved

  I recently bought a new monitor, which is a 22 AOC. I installed the drivers so that the computer detects hardware. Then I go to the screen resolution set at 1920 x 1080, that says that Windows is recommended. I then choose to preserve settings, then press OK.

  When I then restart the computer, the resolution changes right after the login screen to the old 1 of 1440 x 900 (which is the resolution of the screen of the old monitor).

  I tried researching this problem, but nobody seems to have exactly the same problem as me. Help! :)

  This problem also occurs when the monitor is turned off and turned back on again (I have my pc set to automatically turn off the monitor after 20 minutes).

  I had this problem since upgrading to windows 7 and it is very frustrating when you have to re - align icons and others whenever you turn on the monitor / PC back on.
  Fortunately, I found the solution after a few dedicated google searches, but this method requires you to modify your registry so please be very careful.
  Step #1: 
  Open your Start menu and in the search bar type in regedit and press to enter. UAC will pop up asking if you want to allow this program to make changes to the computer, simply press Yes.
  Step #2:
  In the left pane of regedit , you will see a list of registry keys;
  -Click on the small white arrow next to expand this key HKEY_CURRENT_CONFIG .
  -Develop System > CurrentControlSet > control > VIDEO
  
  
  Step #3:
  Now you should see one or more keys with random numbers and letters, for example my video key is {F92BFB9B-59E9-4B65-8AA3-D004C26BA193}.
  If you develop these keys, you will see another key in each of these named 0000
  
  
  Just click on these keys to 0000 to see their values, you are looking for one that has multiple values, for example Attach.RelativeX, Attach.RelativeY, etc.
  The appropriate key 0000 should also have a child key (which is the registry of your monitor settings, yay!) and mine is named Mon12345678 but yours may be different.
  
  
  Step #4:
  Now for the changes of the registry, 0000 and the keys Mon12345678 with the same parameters and values, I changed the two of them are identical. I'm not entirely sure of what a windows 7 uses, but it does not hurt to change both just to be sure.
  In order to change a registry key values;
  -Right click on the value name and select Edit...
  - where it says Base of select the decimal option
  -Enter the new numeric value, you want to enter in the data value: text field
  The parameters to change are;
  Attach.RelativeX - it's your screen X resolution, mine is set to 1360
  Attach.RelativeY - it's your screen resolution is, mine is set to 768
  DefaultSettings.XResolution -it's your screen resolution by default of X, mine is set to 1360
  DefaultSettings.YResolution -it's your default screen resolution, mine is set to 768
  Step #5:
  You're done! Click on file > output and your registry settings will be saved automatically.
  * Restart the system notes * A may be required before these settings take effect.
  
  
  
  
  Hope this helps everyone who has faced this problem!
  -DaMn

• change the configuration of rman in Data Guard envrionemnt

  Hello

  can I change configuration rman on primary and standby without having to stop the replication or swtich?

  the changes are replicated or I have to manually change the two sides? (and what does it matter if im using catlaog or not?)

  v11g

  Thank you

  The changes apply only to primary and standby databases, do not need to change or stop.

  So I highly recommend to read: https://docs.oracle.com/cd/E11882_01/server.112/e41134/rman.htm#SBYDB04700

• HELP ME PLEASE CHANGE THE LOG ON / LOG SETTINGS ON HP/WINDOWS 7

  
  

  Hello Mbaraket,

  Can you be more clear on what you try to change the behaviour of?

  Based on what you say, I think you are talking about the screen saver coming and locking your computer or power settings you have enabled to put the computer to sleep after a certain amount of time...

  Here's how to change the two...

  Adjust your power settings:

  ->-> Power Options control panel Edit power plans

  Set your screensaver:

  Panel-> personalization-> screen saver.

  Then uncheck the "on resume display logon screen" or extend the timeout.

• How can I change the color in this 'pieces '.

  Hello guys, I'm new to the forum and I am looking for help.

  I use a free template I downloaded from

  the internet, but I'm having a little problem.

  When I put the logo I want to use in the model, the color is not the original one,
  After a few minutes, trying to figure out how I could change it to the original version of the logo, I found an option 'fill' with a color that I could change...
  the problem is that when I change the color, all logo change at the same time, so I created 2 logos... an a while with the dark color and the other with red color

  so with this method, I could change the two colors on this "fill" option, and everything would be okay.
  the problem is that both logos evolve at the same time.

  I need to change the X RED and black motorcycle

  Another problem I have is: small pieces of the logo which all come together, they are all black... and I need to change it to the correct color.
  cause the text are in one color and the pieces are all black.

  

  Can you remove the background in one of the compositions and place the two compositions inside another new computer?

  Without seeing the actual model, it is not easy to troubleshoot...

  In the future, it will be much less frustrating for you if you take the time to learn the basics of AE. I would say this: starting After Effects

• Change the margins of the text book

  I'm rather "out of practice" with the ID now and the next problem will prove just how...

  Work on a book where I sank throughout the text. Now I have to change the margins on all pages, which I've tried to modify in master pages.

  The text, however, does not change the way it fits into the new margins. How do I properly?

  Owen,

  Luca

  Turn on release of Layout (layout > setting layout...) Before changing the margins and frames that are broken the margin guides should adjust to the new guides.

• Change the margins

  Hello

  I am a newbie. I created a web gallery in flash format.

  I would like to find a way to change the two topics.

  1. How can I adjust the margins surrounding the flash presentation? I would like to reduce the size of the margins to get rid of orders and the menu so I can incorporate this into a web page without taking up all of the extra real estate.

  2. I use the slideshow affecting only and I would firstly the flash presentation to start automatically once the page loads.

  Is this possible? Maybe in the java file?

  Adjust margins, etc in the Flash based Gallery is a bit tricky and more trouble than what it's worth, in my opinion. I would recommend one of the 2 solutions if you want to get into another Flash file.

  1. export the images and build your own gallery in your Flash file. It will give you more control over you want.

  If this isn't an option:

  2. review a few galleries of third party. SlideShowPro (www.slideshowpro.net) is a very popular option for export to Flash with many more options that you get from Lightroom out of the box.