Change the type of NICs using PowerCLI fails

Similar Questions

• Need ip vm info to change the type of network adapter

  Hello

  I need to change the type of network adapter on the virtual machines, but to do this I will need to get all relevant intellectual property information. This is because the server returns to DHCP afer restart, after the change of the NIC with the command below. I've seen various commands, but the simplest works only with 32-bit powercli which I did not present (or what I want). Does anyone do this?

  Thank you

  Get - vm servername | get-networkadapter | set-networkadapter -type 'Vmxnet3' -confirm:$false

  PowerGui FAQ.

  Q: how to start the administration Console in 32-bit mode on a 64 bit system?

  When you first install PowerGUI, on the last page of the installation there is an option to open the administration Console.  This option will open the default version of the administration Console.  The default version is 64-bit on 64-bit computers, or the 32-bit version on 32-bit computers.  Actually, on computers 32 bit, there is only one version, 32-bit version.  The PowerPacks to use a feature that is only available in mode 32 bits, so you can open the administration Console in this mode to use these PowerPacks.  To do this, you have a few options:

  1. from the start menu, open the programs PowerGUI, then x 86 folders and click the shortcut of PowerGUI x 86 to open the Management Console in 32-bit mode.

  2. in PowerShell, run the following command: & ${env:ProgramFiles(x86)} \PowerGUI\AdminConsole_x86.exe }

  3. in cmd.exe, run the following command: "% programfiles(x86) \PowerGUI\AdminConsole_x86.exe"

  Note that you can have only one instance of the Console of administration open at a time, so if you have already opened the Management Console in 64-bit mode, you need to close this window before you open the Management Console in 32-bit mode.  Also note that you may need to wait a few seconds after closing the window of the Management Console for the process to stop completely, how you can re - open it in 32-bit mode.

• Change the Type of the attribute at the request of the View object

  Hi all
  
  I use JDeveloper 11.1.1.6. I am trying to achieve the following problem.
  
  My Table has a column of type VARCHAR2, but this field is to store, say, displayed in canonical format "YYYY/MM/DD hh '. I want to show the date in a nice format, as October 30, 12 ' and be able to use the datePicker adf (date. MinValue) on the attribute.
  
  So I created an entity object, and I changed the type of the attribute of Date String.
  
  I also created a ViewObject and the test on request module retrieves a date but seems to not understand the canonical format and date it recovers is wrong (something like 5049-02-20 12:45:30.45).
  
  Since then, I work on EBS I oracle API access and so on, so I changed my query View object;
  
  SELECT St St myEO.ExpiryDate-> FND_DATE.canonical_to_date (myEO.ExpiryDate) SELECT as displayed in St St. (FND_DATE.canonical_to_date would be the same thing as to_date (date, format))
  
  When I run AppModule, NICE! It works, it retrieves the date without time and if simple format to give the attribute I can even get the format I wanted.
  
  The problem is that when I try to update and validate changes to DB, (I replace the doDML so I can analyze my Date to a string with the format YYYY/MM/DD hh: mm: as is supposed to be) I can't even the part update. Complains in the framework;
  
  Invalid state, another user has changed the line and blah blah blah and the problem is here:
  
  (oracle.jbo.RowInconsistentException) Houston-25014: another user has modified the line containing oracle.jbo.Key [592674 primary key].
  
  
  [178] compare entity did not attribute display
  [179] original value: 2013-06-28 (that I ran with my FND_DATE.) Procedure CANONICAL_TO_DATE)
  [180] target value: 5048-02-21 22:47:53.0 (I guess that the automatic distribution or conversion of the original string)
  OracleSQLBuilder [181]: ROLLBACK WORK point registration "BO_SP".
  [182] DCBindingContainer.reportException: oracle.jbo.RowInconsistentException
  
  Any suggestion? I'd really appreciate it.
  
  Edited by: Alejandro T. Lanz on 1st November 2012 06:34

  Well, in short :):
  When you try to update the line, frame checks the data in db and cached (from the entity object) value is different from the db value (because you Date and String objects), so that it will throw oracle.jbo.RowInconsistentException exception.

  Dario

• Change the type of sensor pressure strain for SCXI-1314

  Hello!

  I would like to ask how to change the type of strain sensor.

  I use SCXI-1314 and one of my pressure sensor is a type of 4-wire. (Output 100mV, excitement: 10vdc)

  , but I want to replace the sensor by another type of current output type. (Output 4 ~ 20mV, excitement: 12-30Vdc)

  I checked the output voltage cable 4. (Defined as full-bridge OR max)

  Power + = Ex +.

  Food - = Ex-

  CH+        =  S+

  CH-         =  S-

  However, I don't know how to connect the type 2-wire with SCXI-1314.

  In addition, I don't have enough experience on the types of bridge (bridges and whole, quarter half)

  Can you explain what I need to do?

  One thing you migth try is to put a 5 Ohm resistor in the current loop. causing a drop in voltage 100mV on resistance, however check the soil conditions.  Since you will need a new calculation of sensitivty sensor anyway you can use a resistor 4.7 Ohm or 2 10 ohms in parallel... just find a good match between your 1314 input voltage range and the 4-20mA.

  And you will have an external power supply for the sensor.

• Can you change the type of device to 'USB Raw resource' to GPIB controller?

  I'm trying to configure a GPIB FL Contec GP - IB (USB) controller in MAX.  I could so he can register through the creation of a pilot of the Assistant driver VISA, but it fits as a "gross resource USB" rather than as a GPIB controller.  I can send and receive information from the controller, but it does give me an option to search for connected devices of GPIB communicate with them.  Is it possible to change the type of the device, maybe by manually changing the driver created by the wizard of the NI-VISA driver?  Thank you for your time.

  N ° do not use MAX at all. You can just create a GPIB-USB controller on your own. You should contact the seller.

• Change the type of serial number of UUT

  Hello

  I am a new user of Teststand and I would like to change the type of serial number to USE.

  or add condition number of the operator to write in the information of the object to measure dialog box.

  I want the serial number that have just number 20 and no letters.

  If the serial number is different, the dialog box should reappear as at the beginning.

  Hope that I was clear.

  Thank you

  You will need to replace the PreUUT callback and then build some sort of algorithm to verify the serial number desired.

  I've attached an example of how do.

• How to change the type of insurance policy indicator on front panel

  Hello

  I want to change the type of digital indicator police led style. I have the police. But, how can I change the type of indicator of independent policy and not only not by changing the type of policy application. I checked the property node available are only color, size, justification, but type.

  Yoppy.

  Go

   

  LED > right mouse click > Create > property Node > Label > police > name

   

  then use (or)

   

  Digital > right mouse click > Create > property Node > digital text > police > name

  Kind regards.

   

• Change the Type of Interpolation of waveform graphic part

  Hello dear colleagues,

  How can I change the type of interpolation to a graph of waveform in part? Check the attached photo.

  I don't want yellow interpolation to the beginning of the measure.

  I know that the interpolation can be modified with the property node, but this has an influence on all points.

  Any idea?

  Thank you very much.

  

  Hi maximint,

  -NaN values used to hide unwanted in the plot points

  -use separate plots when you do not want the "edges" in land line

• How can I change the type of chassis in an existing CompactRIO project?

  Hello

  I have a built in LabView 8.2 for a chassis 9101 cRIO. Now, I want to bring to LabView 2009 and use it on a chassis of 9104. I would have thought this should be simple, but there is a VI on the FPGA itself. When you compile, I get the error "the device type that has been set up in this function does not match the actual type of the device. I don't want to have to remove the frame of the project & add it back (losing all the settings it can have) - is there a way just to change the type of target, but keeping the relevant parameters?

  Thanks for any help!

  Dave

  Hi Dave,.

  Once you've practiced it several times it is actually a piece of cake.

  Right click on the project select new target or device

  Rember just to specify rather than the current goal.

  Otherwise, you will have a conflict.

  The new target is initialized to the Ip (0,0,0,0) then re address assignment standard.

  Copy (drag) all the components for the new device (RT & FPGA if included)

  Note it's manual labor rather than you have to 'say' labview what material he must understand!

  concerning

  Xseadog

• Is possible to change the type of node WINS with cmd command on a windows operating system that is not joined to the domain?

  Is possible to change the type of node WINS with cmd command on a windows operating system that is not joined to the domain?

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

   
  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/threads
   

  Hope this information is useful.

• in windows 7 I can't find a way to change the type of photo paper glossy

  in windows 7 I can't find a way to change the type of glossy photo example

  I have an epson r1800 and a 595 epson all in one help please

  I use photoshop elements 10

  original title: impression of the printer

  Perhaps the following links will propose a few ideas:

  Windows 7 - choice of print options
  http://Windows.Microsoft.com/en-us/Windows7/choosing-print-options

  Windows 7 - print a photo
  http://Windows.Microsoft.com/en-us/Windows7/print-a-picture

• Compact virtual hard disk and change the type of drive in static

  Hi all

  I want to change the type of my dynamic static vm disk and now I want to compact the virtual hard disk memory for this virtual machine but I want to it without affecting the control points of this virtual machine that I created earlier. I use the SCVMM 2012 administration console. Any reg suggestions it will be useful.

  Thank you

  You should post your question in the following forum for help and appropriate responses:

  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt

• How can I change the type of image file to download on a site like walmart or walgreens for printing?

  How can I change the type of image file to download on a site like walmart or walgreens for printing?

  In general, they will accept the image in the format, that it was taken (if it was taken by the majority of cameras or cell phones).  But if so, you have a few options.

  The most simple and integrated solution is Microsoft Paint.  Yes it is from the 1980s, but it still works and changes of a good job for a time.  Just to right click on the photo file, choose open with and choose paint.  Then go to file > save as and save this return as the file type you want it to be (like PNG or BMP or JPG, quality declining in the JPG option).

  If you need more options like changing the quality he uses during conversion, another free option (of the very very many) is Paint.NET, an open source free image editing program. http://www.dotPDN.com/downloads/PDN.html

  There are also programs that can do it in bulk, so you can highlight 300 photos and do convert them all at once.  You can do this for free or with tools like Photoshop.

• ORA-1403 when change the type of file to APEX_APPLICATION_TEMP_FILES browser storage

  Hi all

  I'm new to APEX.  I use APEX 5.0 and try in site APEX Oracle using load data wizard to download the csv file.

  I managed to download data when the browser file storage type is obsolete WWV_FLOW_FILES.

  However, when I change the type of storage of Table APEX_APPLICATION_TEMP_FILES, system will prompt ORA-1403 when I click 'Next' to the Source of data loading page.

  Exception logging: Sqlerrm: ORA-01403: no Backtrace data: ORA-06512: at the "APEX_050000.WWV_FLOW_DATA_UPLOAD", line 564 ORA-06512: to the "APEX_050000.WWV_FLOW_PROCESS_NATIVE", line 975 ORA-06512: at the "APEX_050000.WWV_FLOW_PROCESS_NATIVE", line 1172 ORA-06512: to the 'APEX_050000.WWV_FLOW_PLUGIN', line 2017 ORA-06512: at the "APEX_050000.WWV_FLOW_PROCESS", line 188

  Someone able to guide how to diagnose this problem?

  Thank you, Dorothy

  DorothySG wrote:

  I'm new to APEX.  I use APEX 5.0 and try in site APEX Oracle using load data wizard to download the csv file.

  I managed to download data when the browser file storage type is obsolete WWV_FLOW_FILES.

  However, when I change the type of storage of Table APEX_APPLICATION_TEMP_FILES, system will prompt ORA-1403 when I click 'Next' to the Source of data loading page.

  Exception logging: Sqlerrm: ORA-01403: no Backtrace data: ORA-06512: at the "APEX_050000.WWV_FLOW_DATA_UPLOAD", line 564 ORA-06512: to the "APEX_050000.WWV_FLOW_PROCESS_NATIVE", line 975 ORA-06512: at the "APEX_050000.WWV_FLOW_PROCESS_NATIVE", line 1172 ORA-06512: to the 'APEX_050000.WWV_FLOW_PLUGIN', line 2017 ORA-06512: at the "APEX_050000.WWV_FLOW_PROCESS", line 188

  Someone able to guide how to diagnose this problem?

  It's bug #21478903: error when changing from APEX_APPLICATION_TEMP_FILES to download files

  Use the deprecated option for now.

• [JS] How to change the type of stroke?

  app.selection[0].strokeWeight = 3;     // app.selection[0] = [object TextFrame]
  app.selection[0].strokeCornerAdjustment = StrokeCornerAdjustment.DASHES;
  

  Hello.

  I tried this code, but error.

  error message: property is not applicable to the current state.

  How to change the type of dotted line?

  You must use the strokeType method, try this

  App.Selection [0] .strokeWeight = 3;

  App.Selection [0]. StrokeType = "dashes (3 and 2).