Restore iOS sauvegardΘ

Similar Questions

• How to hide and restore iOS apps/files 9

  How to hide and restore iOS apps/files 9

  Awaimer wrote:

  How to hide and restore iOS apps/files 9

  There is no record to hide, they will still be on your home screen.

  You can back up apps into folders, simply pressing app until it wiggles and then move it with another application and a folder will be created.

• Restore IOS

  I tried to update the IOS on a router 2501. At the beginning of the upgrade, I got a warning that the file should be deleted. After the upgrade has been in effect for a period of time, the error message appeared: «...» "Error: required memory exceeds available memory;..." Software forced crash 0x111E... »

  This error messages are displayed in a continuous loop. Even when I stopped the router and turn it back on, I get the messages above contunually.

  Have any suggestions on how to restore IOS?

  The poster stated what is the address of the tftp server, but I don't see anything that indicates what is the address of the 2500.

  If they are on the same subnet (and especially if they are connected back to back, as suggested) then I think it should work.

  If they are not on the same subnet, and then another command is necessary to make this work. Configure the default ip gateway

  Otherwise mode rxboot the router does not have any possibility to get on the local subnet, since, as has been pointed out in rxboot mode the router acts as a host to IP and not as a router.

  HTH

  Rick

• Can I restore iOS iOS 10 7 backup?

  I'm updating the phone to my mother from iOS7 to iOS10.  During the update, I got and error and the phone only displays the message "Connect to iTunes".  When I connect to iTunes it tells me that the device must be updated or restored.  The update always fails.  If I do the restoration, and he is restored to iOS 10 I will be able to restore the backup iOS7 on the device?

  Yes, you can restore older backups to the latest version. Note that for iOS 10, you need iTunes 12.5.1 or later version. And the version of iTunes requires Windows 7 or later, or Mac OS 10.8.5 or later.

• Restore IOS 10 - bricks and very slow

  I tried to upgrade to IOS 10 via iTunes and got an error to connect to the phone. I got the plug in I tunes even if I plugged for the update. I unplugged and re-pluged. I tunes restore the software and firmware and asks if I want to restore the backup I had made before the update for IOS 10 attempt. I clicked on restore from last backup and it took over an hour and seems to be at a standstill. He said time 4 minutes for more than 45 minutes and no progress. What should I do? It's an IPhone 6 s more.

  Thank you

  Hello paulfrompalm harbor,.

  Thank you for using communities of Apple Support. It is my understanding that you were unable to restore from your backup to iTunes after the update to iOS 10. Backups to store some more valuable information in your iPhone. I know how it is important to revisit this content. I'm happy to help you.

  Please, try the following steps and test the issue after each step.

  1. Make sure you have the latest version of iTunes.
  2. Connect your device to your computer with a cable USB, then Select your device in iTunes. If your device does not appear in iTunes, you must correct this problem until you can continue. Or, if you have forgotten your password or your device is off, know what to do.
  3. Turn off your computer and your iPhone, iPad or iPod touch. Then turn on again them.
  4. If you use a Mac, skip this step. If you use a Windows PC and iTunes will not respond or never ends your backup, you may need to to update, edit, disable or uninstall your security software.

  If your iTunes backup could not be completed or you cannot restore from a backup

  If you continue to experience problems, follow the remaining steps in the link above.

  Have a wonderful day!

• IPhone cannot be restored (IOS 10 update)

  I downloaded the update of 10 new IOS on my Iphone 6s. Now, there is an Itunes logo on my screen. I have already connected my phone with Itunes but I can't restore...

  Help, please

  Like many other capfreak, your device is in recovery mode.

  You do backup your device before upgrading?

  If so, you can restore the device by plugging it into a PC / Mac and installing the previous iOS version you had before (possibly 9.3.5 If you yourself have updated iOS).

  CJ.

• Restore ios 9.33 to 9,32

  How can I restore from ios 9.33 iOS 9.32 on my iPad Wifi Air.  I was able to connect to my wifi to work without a problem utiul ios 9.33, after the upgrade, that it does not connect.  the screen of the imprint on my wifi to work uses a script based on java.  All previous versions of ios on my iPad until the 9.33 update workd.  I was wondering how to restore the update.  I hate to do, but I need wifi access at work.

  Operating instructions: http://www.redmondpie.com/you-can-downgrade-ios-9.3.3-right-now-while-apple-is-s till-signature-the-more-firmware /

• will not restore iOS iPhone 6 9.2.1

  I was scroll Twitter when I saw a post stating that if I put my iPhone time to January 1, 1970 and reset it using the home and power buttons, the apple logo would be displayed as the original apple logo, multicolored display 'Think differently' under him. So I followed the instructions, because I had nothing to do (at this point, my phone was working fine and there are no problems). I waited the original logo, but I got a normal white with the black screen. Start-up took much longer than normal, it is normally after a minute, at most, but this time he has been slain in the logo of apple for about 5 minutes. Then, to my astonishment, reverse color and it was a white screen with an apple logo black, something that a lot of articles on the claim of safari is the "iPhone white screen of death". Alternate display between the black and white screen screen every 2 minutes about, but never start. I put in DFU mode and connected to iTunes so that I can update it and not lose all the data on my phone. However, I clicked on update even if I believe that my iOS was already in 9.2.1. Everything worked fine during the update, so I thought it would work, but he only returned to the alternate screens. I decided to try the restaurant of DFU mode by iTunes. He checked the restore with apple and got through a status bar. He's still in the black screen with the white apple logo, and another State Bar appeared under him. It was at this point for an hour and a half, but the status bar is not at all filled, and the phone disconnected from iTunes because my phone 'timed out' even if I have not disconnected its cord. I think that the restore process has restarted itself several times because the empty status bar disappear about every 20 minutes or less and then reappears after about a minute. I read that the more data on your device, more required to restore full and I got about 50 GB stored on my 64 GB iPhone 6, but as I said the State Bar has never quite. What should I do?

  This has been discussed here several times. Some have reported that a DFU mode restore to fix it. Some had to take their phone to the genius bar so that it sets.

  There are certain pieces of evidence indicating that you can be able to successfully restore using DFU mode pending until your time zone passes midnight from GMT, and when you have restored it. For example, the time zone, in that I am GMT-5. If I completely borked my phone right now by pulling this stunt, it is possible that if I let it sit for at least 5 hours, when the clock has enough time to roll after midnight GMT, I'm able to get successfully working with a DFU restore again after that.

• Battery drains faster than normal after restoring iOS on iPhone 9.2 6 Plus.

  Hello everyone. Yesterday, I restored my iPhone with iOS 9.2 6 Plus using the latest version of iTunes. In every 1 minutes 4.7% of battery drains while watching a video offline.

  I have reset all settings, updated all my apps from the App Store and the battery drains fast continues. Can anyone fix or wait for the next update?

  Backup of your device

  Factory restore, set up as NEW.  Registration to iCloud will get your contacts, calendars, reminders and notes (other services, such as Gmail, Outlook, yahoo would be probably similar).

  Is there something in the system restore which is to drain your battery.

  Restore the minimum of your applications and test.  If all else fails, you can always restore back to the top again.

• Cannot restore iphone6 sauvegardΘ - out of memory

  Hi all

  I lost a few messages on my iPhone somehow and I try to restore from dos, I done a week before and quantified for the first time.

  When I click on the restoration of the back to the top and enter all passwords I get "restore in progress" on the phone, but after a minute or two, it then comes up:

  Cannot restore backup to Gemiphone not enough space on the phone.

  That is rubbish because there is a lot of space on my phone.

  Someone at - he had this? know any way to move, unfortunately is not another upward which is recent

  All advice appreciated, or decent applications that retrieve texts might be good too.

  Thank you

  GEM

  Suggest following the steps detailed here:

  If you are unable to make a backup of your iPhone, iPad or iPod touch - Apple Support iTunes

• ReSTOR Idevice sauvegardΘ

  Days ago I decied to re - install and clean install my OS and before I got a full upward on my mac and after installation when I wanted to restore my back upwards again on my mac I faced with an error that my back storage capacity is greater than my hard disk storage, and that he was unable to copy the files and documents now what can I do? Here I put a new mac and then restore after that or I can do something to get all files back lasted up to?

  Try to rerun the installation program Wizard and selectively restore items. When you get things most restoration, you can enter Time Machine to complete the recovery of your data.

  Setup Wizard - how to re - run

• Need files restored flashdrive sauvegardΘ

  I have a Toshiba vista 32 - bit home basic system. A virus got into my system and took awhile to clean completely. The system was blue projected with limited function. I did a system restore which has restored my office, but left many other region somewhat disabled (i.e. programs). I decided to reinstall my operating system with full recovery disk Toshiba. My computer works obviously very well, but I have a pny flash drive with my old saved files (backup), and when I tried to reload the files using backup windows and restore advanced, the computer gave a window message titled: lack of user account. The message states: files that you are restoring have security permissions to a user account that is not found on this computer. The missing user account is shown below (i.e., Randall Lowe-PC/Randall Lowe). Please use ctrl. Panel to create a user account with the same name. The security permissions in these files will be reallocated to this user account. CK. Box: restoring files without reallocating the security permissions. My old pc user name was Randall Lowe. My new is Randall. I created a user account Randall Lowe, but it did not work. Red window box appears and indicates: mapping and I.D. not correct. The name given (above) did not fit into the user account area. It looks like my name old/new pc, (Randall Lowe-PC). I used the option to bypass the security permissions. The download of the file ran but never loaded, no prompt message, nothing. How can I download my files? Thank you! R Lowe

  Original title: reloading files after format and disk operating system installation.

  FOR INFO:

  Please do:

  • Keep the topics of conversation on track. It is normal to disagree with another user poster, but don't take the thread off the track to do. Always address your comments to the person who asked the original question, not other posters. Discussions can be blocked in the forum comments if necessary.

• Piecemeal restore cold sauvegardΘ

  Hello
  
  I want to create a copy of our dev database to another server.
  We have Oracle 10.2.0.4 server running on the Solaris 10 operating system.
  
  This database has a @ 120 GB and had a lot of application data.
  
  Now, I want to create a copy of the DB without having the application data.
  
  If I can do the following?
  
  1. take cold backup of this database.
  2 copy the binary oracle controlfile, the log to the target server.
  3. copy the data for the UNDO, TEMP, SYSTEM tablespace files and SYSAUX target.
  4 restore / create the new database? -will you please give me the steps to do this?
  
  Thank you
  DR

  Technically, you can do this. For steps 1 through 3, you need to do is to
  CREATE CONTROLFILE without files tablespace data that you want to exclude.
  OR
  b. ALTER DATABASE DATAFILE DROP... at the stage of the MOUNT, later followed a DROP TABLESPACE

  However, consider that your data dictionary contains definitions of all the objects in the application (Tables, indexes, procedures, views etc.) but no data. You would not be able to use objects. You may be able to extract definitions (I don't know if DBMS_METADATA fails if the object does not exist). However, you could easily do that with an export with LINES = COMPRESS N = N of the Production database.

  Therefore, you could create an empty database using DBCA and then import the norows, nocompress export of Production, if you need the application object definitions in your development / test database.

  Hemant K Collette
  http://hemantoracledba.blogspot.com

• Is it possible to do the restore DB sauvegardΘ FS?

  Hi all
  
  I would like to share the question I recently confronted... Here's the scenario
  
  We took cold backup dB (calibration to 900 GB) of disk, via RMAN. We took FS (file system) backup of this backup disk to tape using Legato MML. There is demand to restore the DB using the same backup and be hosted on another server. We had two options:
  
  (1) do a restore of FS to the target (in the same directory structure) and to restore with RMAN
  
  (2) PCS of all backup sets to the target (in the same directory structure) and to restore with RMAN
  
  We chose the first, but it was a lot of time... I believe that another time demanding.
  
  I doubt if its possible do DB restore directly from (FS backup disk to tape backup) tape rather than do restore FS and do restore DB?
  
  I thank you for your answer as soon as possible, we expect several of these applications in the near future
  
  Concerning
  Jils

  Hi Jils,

  Temporarily your san migration will be (much) faster compared to the tape backup and restore.
  Anyway after you configure rman, the fra and the NBM (coldbackup) procedure would be:

  Make a backup of the fra:
  connection target;
  Connect the catalog rman/define_pwd@define_rcv;
  stop immediately;
  bootable media;
  backup database;
  ALTER database open;

  The fra to tape backup:
  connection target;
  Connect the catalog rman/define_pwd@define_rcv;
  run
  {
  allocate channels c1 type 'SBT_TAPE ';
  allocate channel c2 type 'SBT_TAPE ';
  backup recovery area;
  output channel c1;
  output channel c2.

  }

  On the second server

  connection target;
  Connect the catalog rman/define_pwd@define_rcv;
  # could be that you must set the dbid
  # set dbid = define_dbid;
  STARTUP NOMOUNT;
  run
  {
  allocate channels c1 type 'SBT_TAPE ';
  allocate channel c2 type 'SBT_TAPE ';
  Restore controlfile;
  SQL 'edit the editing of the database';
  restore the database;
  SQL ' alter database open resetlogs;
  output channel c1;
  output channel c2.

  }
  Kind regards
  Tycho

• Help restore from iCloud backup iPod touch iOS 6.1.6

  Do to restore an iPod touch from backup, using iOS 6.1.6?

  Yes, as long as the device that does the backup iOS 6.1.6 and during restoration iOS 6.1.6 or later

  To restore backup see:

  Restore your device from an iCloud or iTunes backup - Apple Support

  https://support.Apple.com/en-us/HT204184

  If you restore from a backup of iCloud apps will be automatically downloaded. If you restore from backup iTunes, applications and music must be in iTunes since synchronized as music media library and apps are not included in the backup of the iOS device what iTunes does.

  You can re-download most of iTunes purchases by:

  Download after purchase from the App Store and iTunes Store iBookstore

  https://support.Apple.com/en-us/HT201272