Change the user information in R12

Similar Questions

• How to change the user name - peer-to-peer network

  I recently installed shareaza, is a peer-to-peer network as you know. the problem is that all of my folders have my name on it: that is to say, he will say sharedfiles/Jose/my documents. I tried to change my username on useraccount, but the name of Jose remains on everything. is there anyway I can change this? Thanks for any help

  Hello

  The fact is that the username will be created at the beginning of the installation of the OS.
  It comes to you account on the laptop.
  Each user account includes the folder my documents.
  In this case, you cannot change the user account if you have a single user profile on the laptop. The title of the user accounts, you can create additional user with different names.

  The other possibility would be to change the download source. But that you change somewhere in the program settings. Unfortunately, this program is unclear to me. In this case, I can give t you information where you will find this option.

• I have a problem with the connection to the computer after you change the user name.

  Original title: HELP

  I changed the username on my laptop and it is not letting me log

  I changed the username on my laptop and it is not letting me log

  Here you go:

  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your Windows 7 repair CD.
  3. Press a key when prompted to boot from the DVD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Configure Windows to a point before you have changed the user name.
  8. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key. This will save you a lot of trouble.

• Smartphones blackBerry how to change the user name of e-mail on a Blackberry Curve 9320.

  Dear community,

  I have a Blackberry Curve 9320. My company has recently changed their messaging system so I need to create a new e-mail account. Creating the account of electronic mail is not a problem. However. some settings need to be changed. When I go on settings, navigation key allows me to change the change the server info, type my password etc. However, I'm unable to change the user name. My device automatically generates a username of email that is not correct and I am unable to change because the navigation button jumps on this area. Can someone advise me on how a change the username of email on a curve 9320. Thank you.

  IT WORKED! Thank you very much. Force the unit to offer "I'll give you the parameters" was the thing. Have a great day.

• Change the user agent of the browser

  Hi all

  I am working on an app for Blackberry 6 and 7 using Webworks. I was wondering if it is possible to change the user agent of the browser.

  What I would do is, add a string to the end. For example:

  Default: ' Mozilla/5.0 (BB7) AppleWebKit/537.36 (KHTML, like Gecko) Safari/537.36 Chrome/33.0.1750.149.

  Mine: "Mozilla/5.0 (BB7) AppleWebKit/537.36 (KHTML, like Gecko) Safari/537.36 CustomText, Chrome/33.0.1750.149.

  Thanks in advance!

  The config.xml file, you can declare rim: userAgent value

  https://developer.BlackBerry.com/HTML5/documentation/v1_0/widget_element_834671_11.html

• How can I change the user of "My Documents" by default? »

  I'm changing the user to 'My Documents' which has initially set up a laptop from the MFG.  while I can use it to another employee. I changed the name of the computer, but how do I change the user of "My Documents" by default? »

  Hi W30330,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/deleting-old-user-accounts-and/08419300-ef7c-42e5-9027-f123128ebcf8

  I hope this helps!

• How can I change the user backup POS?

  Hi guys,.

  Wondering if or how I can change the user to backup of POS on my POS device. Is it possible to change the user after the installation is complete?

  Or I need to reinstall POS to do properly?

  thx for the advice

  Flo

  You can change the user in https://ip-adress/vdp-configure under Configuration.

  'Klick to change the configuration of vCenter' enter the PW the POS and you can change the user name of vCenter.

  A reboot is required after the change, and an integrity check will be performed during the restart.

  If the change will take some time...

  Paul

• Changing the user collection

  I need to limit the number of virtual machines that Ops Mgr is looking for licensing reasons.  I have my user configuration and permissions, but how do I change the user in the collection?  I left empty during the initial installation, so he has rights to look at everything right now.

  Thanks in advance,

  Aaron

  Hi Aaron,

  One of the selections for the vCenter in the Admin UI is "update" - allowing you to add your user to the collection.

• Change the user name in Smart View 11.1.2.1

  Hello
  
  Is it possible to force a change of username in Smart View 11?
  
  Once the user is connected to they need to restart the copmputer to change the user name.

  I thought of making a right click on the HFM application and clicking on logout would work, but it didn't. Instead, you must click on disconnect all. You can find it in the Smart Panel View, by clicking on the little black arrow next to the Home icon.

  Let me know if you still see issues.

  See you soon,.
  Mehmet

• How can I change the user name and password

  I successfully download the FVO and install the virtual appliance. It works very well with my blackberry. I can connect to individual servers or virtual Center.

  However I don't know how to change the user name and password.

  I would also like to know how it works?

  We have a BES server on our network and no configuration is necessary. I just turned on the device Mobile Access of vCenter and entered the ip address of my virtual Center and bingo, I can access through my blackberry.

  If you try to change the Appliance virtual username and password, you can use the standard linux commands (adduser, passwd, chgrp, chown, etc.,)

  The default user name and password so that the robot is root/vmware"."

• How to pre-fill the user information during the operation to assign tasks

  Hello

  I have a requrirement to pre-fill fields of the form (name, Email, phone etc) when a task is assigned to a user. Users are dynamically specified, so I use the user to find and services to assign tasks to locate and assign them to the user. Since I was a user variable that is the result of the operation of the user to find, I was hoping to get the user information with the attributes of the type of user.

  I tried to use the service to set the value to set the form field (Email) with the email of the user that is object type attribute

  / process_data/MyForm/Object/Data/XDP/datasets/Data/Form/User/email-> /process_data/facilityAuthority/object/@email

  However I get the following error when I try to do - com.adobe.idp.dsc.util.InvalidCoercionException: can not compel object: [B@335d of the type: [B type: interface org.w3c.dom.Document.]]

  Is it possible to retrieve information from the user to the user object? If yes how values for the attributes of the user (name, Email and phone etc...) so that I can fill in the form?

  Thank you
  Nicolas

  Hello

  Please cast chain e-mail before you assign it.

  Example of

  / process_data/MyForm/Object/Data/XDP/datasets/Data/Form/User / email-> string (process_data/facilityAuthority/object/@email)

  For more details, please refer to the forum http://forums.adobe.com/thread/492826

  Thank you

• What does "change the user myuser account unlock" do?

  What is the statement "change the user myuser account unlock" do? I'm looking at a few examples to use the oracle data pump. He asks me to unlock the account.
  
  TIA
  Ravi

  You can not access a locked account. You can connect to an unlocked account (open).
  ALTER USER myuser ACCOUNT UNLOCKING unlocks the account if you can connect using it.

• change the user of the BONE

  Hai all,
  
  Plan to change the OS user for oracle database applications...
  
  
  The database is currently owned by oratoure, I intend to change as follows:
  
  
  (A) create a new user, oramoure
  (b) assign the Group dba
  (c) change of complete ownership of the directory to oramour (where oracle apps_st and tech_st) is
  (d) attach the file of the environment to the bash profile...
  (e) provide access to oramoure to/tmp and/var/opt/ora *.
  
  
  nothing else to do?
  
  
  
  Kai
  
  Published by: KaiS on October 18, 2008 22:53

  Kai,

  Please refer to the following note and follow the steps in the evolution of the property of the database files (skip the steps of cloning):

  Note: 558478.1 - cloning of a house database and change the user/group that owns
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=558478.1

• Information required when changing the user password special appl

  Hello
  
  We have a requirement where we need to change the password for the following users.
  
  IBEGUEST
  IBE_ADMIN
  IRC_EMP_GUEST
  IRC_EXT_GUEST
  OP_CUST_CARE_ADMIN
  OP_SYSADMIN
  ASSISTANT
  
  Let me know whether autoconfig/application closing or not while we change the password?
  
  Version:-EBS 11.5.10.2, DB 11.2.0.2
  
  I think that neither autoconfig, nor do I need to stop all the services to change the above user passwords. But please confirm!

  Vicky1 wrote:
  Hello

  We have a requirement where we need to change the password for the following users.

  IBEGUEST
  IBE_ADMIN
  IRC_EMP_GUEST
  IRC_EXT_GUEST
  OP_CUST_CARE_ADMIN
  OP_SYSADMIN
  ASSISTANT

  Let me know whether autoconfig/application closing or not while we change the password?

  Version:-EBS 11.5.10.2, DB 11.2.0.2

  I think that neither autoconfig, nor do I need to stop all the services to change the above user passwords. But please confirm!

  It is not necessary. Please note that changing the password for all users of the application (except the GUEST user) does not require running AutoConfig or bouncing the application services.

  What is the Impact of a seeded Oracle users disabling? [418767.1 ID]
  Is it safe to Date Some Applications end users as a GUEST? [783428.1 ID]
  Configuration Guide for Oracle E-Business Suite 11i [ID 189367.1]

  Thank you
  Hussein

• I gave a comuter the person who owned it died. How can I change the user name and password?

  A few months ago, I gave a comuter the person who owned it died. The window indicates Micrsoft Window XP Professional-HP. My problem is that I do not have access on behalf of users and password. What should I do?

  Hello

  Many on this forum suggests that when you "inherit" a PC, you should do a clean install of Windows to delete the unwanted "baggage" that the previous owner has left behind. For example (but not limited to) viruses and criminal and illegal downloads. Such a procedure will reset all the passwords anyway. The PC may have a factory reset mechanism still intact. Visit the manufacturer website for more information, or we do know the number of brand, range and model of your PC for assistance.

  If you are using XP Home Edition, the built-in Administrator account probably doesn't have a defined password. You can start in safe mode, where this account will be selectable when connecting. It allows to connect and change the password of any other connection.

  To start in safe mode, keep hitting F8 twice a second after turning on the PC until you get the start menu where safe mode is selectable by the up/down arrow keys, and then press ENTER.

  If you are using XP Professional, try to connect using the built-in Administrator account. You don't need to do it in safe mode (although you can if you wish). If your normal login screen is a display of the user symbol and hit ctrl-alt-del twice to get to login to text entry. Type administrator as the user name and try a blank password.

  See also http://support.microsoft.com/kb/321305

  Other than the foregoing, this forum has a policy of unknown passwords

  http://support.Microsoft.com/kb/189126

  Tricky