Change the VoP url in vCenter plugin
We notice that the VoP vCenter plugin accesses our server of VoP by IP address, which generates warnings of certificate. How/where can we change the current https://
Hello When this happens, the easiest way to fix is to remove the plugin from vCenter manually, by following this process: First, clear the checkbox for the Plugin from vCenter in VoP under settings-> General-> tab environment for the server vCenter in question. Then follow these steps to remove the plug-in to vCenter: Note: If the plugin continues to appear, you may need to restart the vSphere Client. Finally, re-check the plugin at the entrance of the vCenter server in VoP to have re - install the plugin making reference to the new IP address. In the future, before changing the IP address of VoP, remove the checkbox on the entrance of the vCenter server and save. Which will automatically remove the plugin entry, then you can re - check this last after the VoP IP is updated. Tags: Dell Tech Change the timeout of web vCenter client 5. I saw this question listed several times in the VMware communities, but he never responded. Is there a way to change the web client to vCenter session timeout 5? Changing the session timeout value is not implemented in vSphere 5.0.As now, the default value is 30 min. may be that we will have this feature in the next version (vSphere 5.1) Change the Service account of vCenter Hi all I was wondering how easy it is and what it is to change the service account of vCenter Local system as a domain account? Thank you Chris. TallChris wrote: Hi all I was wondering how easy it is and what it is to change the service account of vCenter Local system as a domain account? Thank you Chris. Hi please follow the steps below Yours, Hello have a look at the page template. Home--> Application Builder--> Application XX-->--> models shared components According to the Setup, you should find something like He simply change "#HOME_LINK #" to your desired URL/page. I hope this helps... Thank you change the simple url search engine Until I downloaded Weather channel destop, when I type any general term in the URL automatically, he went to google search. Now, when I type a general term in the URL box, he goes to ASK.com I have google in my search engine in the search box at right, but I want to make my search "go to" when I type in what either in the URL. Is any way I can change it to GOOGLE vs Ask.com? Thank you https://support.Mozilla.com/en-us/questions/906515 Thank you How to change the memory allocated for VCenter server, which is a virtual machine I'm trying reclassification of 3.5 to Vsphere 4.1 and I improved VCenter first, making it a virtual machine. However, when I created the server I did not allocate enough memory for it and I'm getting errors. How can I allocate more memory for the virtual machine while it is stopped? I can not allocate more memory, except if it is closed, but with it being the VCenter server if I stopped him so that I can access with the Vi client. Is there a service console command? I searched for a few hours and found nothing. Thank you!! Discover what the vCenter ON WHAT VM ESX host is marked (e), connect directly to the ESX host and find the vCenter VM and make the change. Hello I need to change the last part of the URL sent by post in the apex dynamically. I have a requirement that a person can register itself with a new user name and other details. When the user clicks on the button register after you have entered all the required values in the page all values will be inserted into the user_details_repository table in the database. At the same time an email with a url link is sent to the user admin for the assertion. When the admin user, click on the link it is redirected to a page where all the details submitted by this particular user is displayed. The admin user can confirm or reject the new user registration. If the admin user says, all the data repository of this particular user table will be inserted in a main table named user_details and data will be deleted from the repository table. Yet once if the admin user rejects, all the data repository of this particular user table will be deleted. For this, I have created two pages for this and all of the features mentioned above works correctly except change the link url each time a letter is sent to the admin user when a new user register itself. To send email, I created send e-mail process. I need to change the last word/part of URLs within html body according to the username provided by the new user. for example, the url to another user will be like this: http://localhost: 8080/apex/f? p = 103:9:3849261906471:NO:USERNAME:Namrata http://localhost: 8080/apex/f? p = 103:9:3849261906471:NO:USERNAME:Madhura Help, please. If there is another way to achieve the same thing please answer. Thank you Nilesh Hi Nilesh, You can use a Page element as a substitution variable in the body of the HTML message. for example, blah blah blah & P123_MY_PAGE_ITEM. blah blah blah The syntax is an ampersand in front of the name of page element and a point after the name. brgds, Peter How to change the URL path? Hi ChirOn, I have no configuration of IIS for me to test this, but this gives a shot: To redirect requests to another Web site or directory 1. in the services manager IIS, expand the local computer, right-click on the Web site or directory you want to redirect, and click Properties. Good luck! Best regards -Joe Of course, change the current authentication scheme and there change in the sign-out URL attribute. Scott What should I do to change the URL of our application? Change the useless URL of the changes much more that I said. Unless you put in place a few customizations. Nicolas. I have a podcast that has been updated automatically whenever I added a new post on my site. This has been implemented by a previous web designer in 2008, and when I updated my website, it kept the same info and just kept the podcast announcement. I now Drupal WordPress and it does not recognize anything. I tried to get in the podcast and manually download, but I see is what is shown on my podcast as if I'm received, not the owner. Any ideas how I can get in there and change it? Firstly, without your power poster and the iTunes Store URL of the page, it is not possible to assess exactly what is happening. I can't advise on the specifics with Drupal or Wordpress, if you can find documentation of the latter: https://en.support.WordPress.com/Audio/Podcasting/ If changing Drupal, WordPress, you have also changed the feed URL, you must go through a specific process to tell the store to change; the details are described here- MD vCenter Plugin version 2.5 problem storage array Hello OK, I installed the MD storage array vcenter plugin version 2.5 on my server vcenter. However, on my PC when I run the VI client I see under manage plugins, the ability to download and install the plugin. When I do that it fails with the error below: Storage array Dell MD-plug-in vCenter of Dell, Inc. 02.50.3600.0020 Any idea on how to solve this problem? (DNS works very well) Thank you Hello NZJJ, It seems that the file you downloaded is correct just seems to be a problem in accessing. Here is a link to the installation guide for the plugin. I'll make sure that you install as recommended by us & see if you still get the same issue. FTP://FTP.Dell.com/manuals/common/PowerVault-md3200_Deployment%20Guide6_en-us.PDF Please let us know if you have any other questions. How to change the name of host server IMO? Hi, guru. Is it possible to change the name of host server IMO? Architecture: Server A - Oracle RDBMS Server B - IOM: admin, IOM, soa. Version of IOM - 11.1.2.1.0 (If possible) it is necessary to change the server A server B in host names. During installation, the FQN to the server host names have been used. The procedure for changing the DB server host name is clear and simple. The question is on the server of the IOM. Unfortunately, I did find the documents that describe the process of change for the IOM system hostname. But fortunately the problem has been resolved. Shortly, the process is as follows: 1. in my case: db oracle 11.2, wls 10.3.6, iam 11.1.2.1.0, soa 11.1.6. System - DB Server + server of IOM. 2 VMS when copied to the new server. 3. change the configuration files of MAC, IP, two servers. 4. change the host name of the DB server. Restore the dbconsole EM repository (if used). 5. change the IOM servers configuration with wlst listeners. 6. change the source URL with wlst database IOM. 7 remove the cache, tmp, newspapers of servers. 8. replace all references to the old hostname with the new host name in the configuration files. 9 start the administration server. Change in $DOMAIN_HOME/servers/AdminServer/tmp/_WL_user/em/hsz5x1/META-INF/emoms.properties configuration file 10. restart Admin, start managed servers. 11 change DirectDB, OimFrontEndURL, BackOfficeURL, Rmiurl SOA Soapurl URL in MS (change management of the cycle of life-11 g Release 2 (11.1.2.1.0) management), urls detail task human workflow. 12. check the application code for direct reference for host name, change. How can I change the user backup POS? Hi guys,. Wondering if or how I can change the user to backup of POS on my POS device. Is it possible to change the user after the installation is complete? Or I need to reinstall POS to do properly? thx for the advice Flo You can change the user in https://ip-adress/vdp-configure under Configuration. 'Klick to change the configuration of vCenter' enter the PW the POS and you can change the user name of vCenter. A reboot is required after the change, and an integrity check will be performed during the restart. If the change will take some time... Paul Change the VLAN ID on a group of ports on a vSS We are changing the subnet that our vCenter VM resides on that will translate into change us vCenters IP address, subnet mask and gateway. He also goes to say that we must change the VLAN ID on the port group. My question is, can we change the Port Group VLAN ID first or first change vCenters details?. (So it is in VST Mode physical ports on the switch are trunk ports with say VLAN 100 and 200 with the new 300 of VLAN to add) Very welcome any suggetions. :-) Use the vSphere client to connect to the host that is running the VM vCenter. In this session of vSphere client, you can (a) change the VLAN switch vSS (b) open a console for the VM vCenter and change the IP settings it The vCenter VM will lose its network connection, but your session will continue to run, because you are connectly directly to a host (and no to vCenter). If the vCenter server is connected to an Active Directory server, then make sure to use a local administrative account or a domain administrator with cached credentials to connect. Furthermore, after you change the IP address of vCenter you will probably run the issue described here: http://kb.vmware.com/kb/1001493, but the article contains a resolution for this. Product name: Macbook Pro 13 inch Retina early 2015. OS (when the problem started): Yosemite 10.10.5 OS (now): El Capitan 10.11.5 The problem So yesterday my Mac Wifi connection dropped suddenly. So, I moved to lightning Ethernet connection which has Upgrading to FF 8.0.1 QuestionI am running FF 8.0 on Win7 Pro 64-bit. When I "check for updates", FF 8.0.1 is not installed. According to the screen on Firefox, I'm running on "release update channel". Do I have to install the 8.0.1 update manually? Pavilion dv7: how to move the existing operating system from the hard drive to an SSD added I would like to add an SSD for my laptop, and then use it for the OS from W7, leaving the HD for data. Hi, I bought this HP Pavilion p7-1241 Dekstop 2 months. I intend to add an EVGA GeForce GTX 550Ti 192 bits (Fermi) 1 GB GDDR5 PCI Express 2.0 x 16 video card and I wonder if I need to improve my power of 300w. If I do need to update, how many watts d 23 Dec received automatic update message. I waited until I was ready to disconnect so that my system would automatically install before disconnecting completely. Overnight updates updated where still there. So I tried to install them one at a time.
Where the server vcenter or IP name is the name of your server vCenter or its IP addressSimilar Questions
Could someone explain how to change the LOGO URL (when I click on redirect logo should go not to the home page, but to any page I want to set manually).
Thanks for the tips.
Apex 4.1.
Sandro
Mandy
I find this code, but this one for OC4J
< html >
< head > < title > My OBIEE Application < / title > < / head >
< frameset lines = "0%, 100%" >
< frame src = "" noresize = "noresize" > "
< frame src = "move.html" >
< / frameset >
< / html >
Move.html
< html >
< Head >
< meta http-equiv = "refresh" content = "0; URL = http://localhost/analytics/saw.dll?Dashboard">
< / head >
< / html >
in
Published by: chir0n on January 27, 2010 12:30
Published by: chir0n on January 27, 2010 12:43
2. click on the home directory, virtual directory, or Directory tab.
3. under content from this source should come from, click a redirection to a URL.
4. in redirecting to the zone, type the URL of the directory of destination or of the Web site. For example, to redirect all requests for files in the directory of the catalogue to the NewCatalog directory, type/NewCatalog.
is there an easy way to change the LOGOUT url Specifies a page?
I changed my home page 9 page, it works well for the first connection, but when user logout and log back in there just go to page 1.
I check after disconnection of the user. the login page has trailing ': 1' indicating that he asks for page 1.
see you soon,
Joel
http://xxxxxxx.XXXXXXX.com:8095
TO
http://YYYYYYYY.YYYYYY.com:8095
installation of env: on PTools 8.47, Weblogic 8.1
What should I do to change the URL of our application? What do I need to create a new PIA or redeploy the existing? pls advice.
THX/t
In addition, certain routes may have their own definition of the connector.
People with disabilities
Dell MD storage array
Manager vCenter
The following error occurred during the download of the plugin script of https://172.xx.xx.xx:8088 /
vcenterconfig/configuration.xml:
Request failed because of a logon failure. (Unable to connect to the remote server)Maybe you are looking for