Change to save the hour setting.
I have a Dell U2711 deservi DVI from my Windows 8.1 with a card NVIDIA GTX 760 PC. If I leave the mouse and keyboard unused for about 5 minutes, the screen goes black. If I move the mouse, the screen reappears. My windows settings are for display never sleep, so I think that's putting something in the monitor. Is this true? If so, how do I change the time and/or switch off completely? Thanks, Jim
I found the solution. I had the screen saver Windows put blank screen after 5 minutes. Everything is OK now. Thank you.
Tags: Dell Peripherals
Similar Questions
-
Outlook express does not save the password setting
Original title: Outlook express
My outlook express keeps invites me to press ok for my saved password whenever I press a button, or after a period of 15-30 seconds. How to disable this option? I saved the password and I went to properties/server to uncheck the box saying: I need password authentication. How can I stop this incitement of popping up whenever I'm on my email several times?
Outlook Express keeps to request your password
http://www.dougknox.com/XP/Tips/xp_oe_passwords.htmSave the password setting will no longer exist in Outlook or Outlook Express
http://support.Microsoft.com/kb/290684 -
Change to save the file windows updates 8
I have an SSD of 24GO on which I have installed Windows 8, but the problem is that the drive is not large enough for its updates, so I was wondering how to change Windows update record the location of the file on another hard drive?
Hello
Thanks for posting your query on the Microsoft Community.
According to the description, I understand that you want to change the update of Windows save the location of the file on another hard drive.
I wish to inform you that there is no option to have Windows Update files to a location other than the system files. It is necessary to have Windows Update files to be saved on the same drive and the same partition as the operating system.
However, as you have limited space on your SSD, you can choose to disable the automatic updates of Windows and install only those who are well kept.
You can follow the steps described in the article below to turn off the automatic updates of Windows or to manage the way that Windows provides and installs available updates on your computer.
You can also check out the article below.
http://Windows.Microsoft.com/en-us/Windows-8/Windows-Update-FAQ
Hope this information helps. Please let us know if you need additional assistance. We will be happy to help you.
-
Original title: Excel file permissions
At my work, all except 2 computers are Macs. I'm one of the only Windows machines. I created an Excel file which I want everyone at the office to access and modify. We have put on the Mac server and changed the permissions for everyone to read and write. I also had that done on the Windows machine before placing it on the server. However, people on Mac machines can open, change it and save it without problem. But if one of the machines Windows opens, modifies and saves, it restores the Mac machines to read-only. Anyone know how to fix this?
Hi amber,
Please contact the Microsoft Community.
I would have you post here for further assistance.
http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking
Let us know if you have any other problem with Windows in the future.
-
Change to save the file after 20 seconds
Hello world
I am trying to acquire data at a frequency of 50 Hz (random numbers for this test) and send to a lower loop with an architecture of producer-consumer. I would change my saving file after 20 seconds (or N seconds) automatically.
I put a saving botton and a stop one but if I press the Stop botton, my VI does not close.
I really don't know what could be the problem.
Thank you in advance!
Hi Lorenzo,.
the block "Dequeue Elelement" has a defined timeout value. By default, one is - 1, it will wait indefinitely the incoming elements in the upper loop. So if you stop the upper loop, the bottom will keep waiting until you press "Cancel".
-
That's what I usually get
Version = 1
EventType = AppHangB1
EventTime = 130484980926451522
ReportType = 3
Consent = 1
UploadTime = 130484999275764608
ReportIdentifier = 563046df-ff59-11e3-8bdd-742f68a03d97
IntegratorReportIdentifier = 563046e0-ff59-11e3-8bdd-742f68a03d97
Response.BucketId = 685174449
Response.BucketTable = 5
Response.Type = 4
SIG [0]. Name = name of the Application
SIG [0]. Value = Dllhost.exe
GIS [1]. Name = Version of the Application
GIS [1]. Value = 6.1.7600.16385
GIS [2]. Name = timestamp of the Application
GIS [2]. Value = 4a5bca54
GIS [3]. Name = Signature of Hang
GIS [3]. Value = 0544
GIS [4]. Name = Type of Hang
GIS [4]. Value = 0
DynamicSig [1]. Name = OS Version
DynamicSig [1]. Value=6.1.7601.2.1.0.256.1
DynamicSig [2]. Name = locale ID
DynamicSig [2]. Value = 1033
DynamicSig [22]. Name = Signature extra Hang 1
DynamicSig [22]. Value = 05440983ee821818b723a3a237b2dce6
DynamicSig [23]. Name = Signature Hang extra 2
DynamicSig [23]. Value = babf
DynamicSig [24]. Name = Signature Hang extra 3
DynamicSig [24]. Value = babf43d786a32c16ae0772c4656c1c3a
DynamicSig [25]. Name = Signature extra Hang 4
DynamicSig [25]. Value = 0544
DynamicSig [26]. Name = Signature of additional 5
DynamicSig [26]. Value = 05440983ee821818b723a3a237b2dce6
DynamicSig [27]. Name = additional hang Signature 6
DynamicSig [27]. Value = babf
DynamicSig [28]. Name = Signature extra Hang 7
DynamicSig [28]. Value = babf43d786a32c16ae0772c4656c1c3a
UI [3] = COM Surrogate does not
UI [4] = If you close the program, you can lose information.
UI [5] = close the program
UI [6] = close the program
UI [7] = close the program
LoadedModule[0]=C:\Windows\system32\DllHost.exe
LoadedModule[1]=C:\Windows\SYSTEM32\ntdll.dll
LoadedModule[2]=C:\Windows\system32\kernel32.dll
LoadedModule[3]=C:\Windows\system32\KERNELBASE.dll
LoadedModule[4]=C:\Windows\system32\msvcrt.dll
LoadedModule[5]=C:\Windows\system32\ole32.dll
LoadedModule[6]=C:\Windows\system32\GDI32.dll
LoadedModule[7]=C:\Windows\system32\USER32.dll
LoadedModule[8]=C:\Windows\system32\LPK.dll
LoadedModule[9]=C:\Windows\system32\USP10.dll
LoadedModule[10]=C:\Windows\system32\RPCRT4.dll
LoadedModule [11] = C:\Windows\system32\IMM32. DLL
LoadedModule[12]=C:\Windows\system32\MSCTF.dll
LoadedModule[13]=C:\Windows\system32\CRYPTBASE.dll
LoadedModule[14]=C:\Windows\system32\CLBCatQ.DLL
LoadedModule[15]=C:\Windows\system32\ADVAPI32.dll
LoadedModule[16]=C:\Windows\SYSTEM32\sechost.dll
LoadedModule[17]=C:\Windows\system32\OLEAUT32.dll
LoadedModule[18]=C:\Windows\system32\CRYPTSP.dll
LoadedModule[19]=C:\Windows\system32\rsaenh.dll
LoadedModule[20]=C:\Windows\system32\RpcRtRemote.dll
LoadedModule[21]=C:\Windows\System32\netshell.dll
LoadedModule[22]=C:\Windows\system32\SHELL32.dll
LoadedModule[23]=C:\Windows\system32\SHLWAPI.dll
LoadedModule [24] = C:\Windows\System32\IPHLPAPI. DLL
LoadedModule[25]=C:\Windows\system32\NSI.dll
LoadedModule [26] = C:\Windows\System32\WINNSI. DLL
LoadedModule[27]=C:\Windows\System32\nlaapi.dll
LoadedModule[28]=C:\Windows\WinSxS\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_fa396087175ac9ac\comctl32.dll
LoadedModule[29]=C:\Windows\system32\apphelp.dll
LoadedModule[30]=C:\Windows\system32\netcfgx.dll
LoadedModule[31]=C:\Windows\system32\SETUPAPI.dll
LoadedModule[32]=C:\Windows\system32\CFGMGR32.dll
LoadedModule[33]=C:\Windows\system32\DEVOBJ.dll
LoadedModule [34] = C:\Windows\system32\devrtl. DLL
LoadedModule[35]=C:\Windows\system32\dot3ui.dll
LoadedModule[36]=C:\Windows\system32\dot3api.dll
LoadedModule [37] = to C:\Windows\system32\ATL. DLL
LoadedModule[38]=C:\Windows\system32\eappcfg.dll
LoadedModule[39]=C:\Windows\system32\hnetcfg.dll
LoadedModule[40]=C:\Windows\system32\slc.dll
LoadedModule[41]=C:\Windows\system32\GPAPI.dll
LoadedModule[42]=C:\Windows\system32\USERENV.dll
LoadedModule[43]=C:\Windows\system32\profapi.dll
LoadedModule[44]=C:\Windows\system32\wbem\wbemprox.dll
LoadedModule[45]=C:\Windows\system32\wbemcomn.dll
LoadedModule[46]=C:\Windows\system32\WS2_32.dll
LoadedModule[47]=C:\Windows\system32\wbem\wbemsvc.dll
LoadedModule[48]=C:\Windows\system32\wbem\fastprox.dll
LoadedModule[49]=C:\Windows\system32\NTDSAPI.dll
LoadedModule [50] = C:\Windows\system32\dhcpcsvc. DLL
LoadedModule [51] = C:\Windows\system32\dhcpcsvc6. DLL
LoadedModule[52]=C:\Windows\system32\UxTheme.dll
LoadedModule[53]=C:\Windows\system32\oleacc.dll
LoadedModule[54]=C:\Windows\system32\SPINF.dll
LoadedModule[55]=C:\Windows\system32\WINTRUST.dll
LoadedModule[56]=C:\Windows\system32\CRYPT32.dll
LoadedModule[57]=C:\Windows\system32\MSASN1.dll
LoadedModule[58]=C:\Windows\system32\VBoxNetFltNobj.dll
LoadedModule[59]=C:\Windows\system32\ndiscapCfg.dll
LoadedModule[60]=C:\Windows\system32\rascfg.dll
LoadedModule[61]=C:\Windows\system32\rtutils.dll
LoadedModule[62]=C:\Windows\system32\MPRAPI.dll
LoadedModule[63]=C:\Windows\system32\tcpipcfg.dll
LoadedModule[64]=C:\Windows\system32\DNSAPI.dll
State [0]. Key = transport. DoneStage1
State [0]. Value = 1
FriendlyEventName = Stopped responding and was closed
ConsentKey = AppHangXProcB1
AppName = COM Surrogate
AppPath=C:\Windows\System32\dllhost.exe
ReportDescription = a problem caused this program blocking interact with Windows.chk axelRB response from the link
-
Could not save the WRT54G Router settings!
Recently, I have reset the Linksys WRT54G Router because I can't get the page with a note to "CONTINUE", I used to have. I can also save the new setting. What comes out is a blank page. Pls help me. Thank you.
This problem is usually caused by suboptimal communication between the computer and the router. The most common cause for this is a computer software firewall problem, but there are also several other possible causes:
To view web pages of the router (and to solve problems "Cannot save settings"):
You don't need an Internet connection. 'web Pages' of the router are integrated into the router.
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is connected to the router.
In the non-working computer, temporarily disable your firewall software.Point your browser to 192.168.1.1, and then connect to your router. Your username must be left blank. Your password is "admin" (without the quotes), unless you changed it.
If you use Zone Alarm, do a right-click on the ZA icon in the taskbar (bottom right of screen) then click on "Shutdown ZoneAlarm" and see if that solves your problem. If this does not work, try the following with Zone Alarm: open the control center ZAISS, go to privacy, then temporarily disable Ad Blocking and Cookie Control and see if it solves your problem.
Some Zone Alarm users reported that the addition of 192.168.1.1 to their address list "of trust" solved the problem. This trick can also work with other firewalls.
If you use Noton Internet Security with the add-on Pack, don't forget to disable the blocker and ad blocker. Some users have reported that they needed to uninstall all Norton Add-on Pack.
If you can not get anything to 192.168.1.1 then perhaps this is not the address of the router. Go to 'Start' > all programs > Accessories > command prompt.
A black DOS window will appear. Type "ipconfig" (with no quotes), and press the Enter key. Look at the "default gateway". It is 192.168.1.1? Point your browser to the 'default gateway', can connect you to your router.If the above fails, unplug your modem router, then try again. If it solves your problem, then you probably a "modem-router" rather than a regular modem. A report with this problem and also specify the brand and exact model of your modem (not router) number.
If all above fails them, turn off your entire system, unplug it from the wall, wait a minute, then lights up, then try again.
If all the above tips fail, then reset the default router: power down the router and unplug all the wires. Wait a minute. Switch on the router, let it fully boot (1-2 minutes), then press and hold the reset for 30 seconds button, then release the button and allow the router to reset and restart (2-3 minutes). Turn off the router. Wait a minute. To connect to a computer, cable, a router's LAN port. Initialize the system. It should work.
If you still have problems, then you must download and install (or reinstall) the latest firmware for your router. After the update of the firmware, you must reset the default router, and then configure the router again from scratch. If you have saved a router configuration file, DO NOT use it.
-
I use Windows 7 with firefox as my default browser. When I download a program using firefox, I wonder if I want to save the file, and then must go to the download folder to start the download. When I download using internet explorer, I gives me the ability to run the download at the time where it is downloaded instead of save the download. Is there a setting I can change to allow me to run downloads when using firefox instead of record?
Hi shortwedge3,
You can use the OpenDownload2 extension for the run option when downloading files with Firefox
-
I tried different routes to add the standard brand of tools to my page, but it doesn't seem to be a way to save the change. Never had this problem before. I'm working on a Surface Pro 2.
Hi smartguy927,
Please open Acrobat, go to the menu help & "Repair Installation", also check the updates, if any please install.
Now, try to reproduce the problem.
Kind regards
Nicos
-
How to save the changes to the size of the text
How to save text size increases. The zoom feature will return to the previous setting when I change web page. I wasn't able to change the size of the font using the font setting in the Tools tab.
You can use an add-on to set the zoom level for all sites. For example, NoSquint and Default FullZoom Level.
-
Original title: cannot set a power scheme in Power Options
Cannot set a power scheme. When I try to save the scheme, "Manager power strategy impossible to define the... two revision levels are incompatible."
How can I fix it?
Hi BernieHopkins,
1 have you properly previously defined the power scheme?
2 have you made any hardware changes or software on the computer before this problem?
3. What is the full error message that you receive?
If you receive the same error as mentioned in this link, you can follow this link & check if the problem persists.
Hope the helps of information.
Please post back and we do know. -
How can I change the default setting of font size and type when using e-mail?
When sending an email, I have a default setting of the Arial font to 10 points. If I change what it comes down to Arial next time I use it. I don't know how to change the default setting.
Hi Robin,
What e-mail program you are using (name and version)? Windows Mail, Windows Live Mail, Outlook, a program that you access through your browser (and if yes, what name and version of the browser?) something else (and what version and/or year of this product)?
What Version of Vista you are using (for example, 32-bit Vista Home Premium SP2 or other)?
Thank you!
P.S. I am pretty sure that the procedure is simple and can be done-, but it varies depending on whether you use, so I want to provide the information that is applicable to you.
**********************************************************
EDIT: Just a few alternatives which may help:
If Windows Mail, go to Tools / Options / compose / font settings (ditto for fonts Signature if you use signatures) and change it to anything you want. Save the changes and close Windows Mail, and then reopen it. Your default sending policy should now be what you set with this configuration.
************************
If Windows Live Mail, this MVP following is courtesy of Michael Santovec,:
"You use the Windows Live Mail (WLM) installed on your PC or the.
Hotmail/Live.com Web site? If in case of doubt, by reading an e-mail message has
Help (ALT + H). If the help pop-up menu and the last item will say 'on '.
Microsoft Windows Live Mail"you use the WLM (2008/2009) program. If she
'About Internet Explorer', says, you use the Web site. If the House of Ribbon
Select instead of the Help menu, you are probably using the version of WLM 2011. TO
check the selection ALT + F, about.For questions of Hotmail (Hotmail.com/Live.com/MSN.com), use these forums
(Including the use of the website of Hotmail and Hotmail account problems)http://windowslivehelp.com/product.aspx?ProductID=1
Set the default font for new messages - only applies to messages in HTML format
-WLM-2008/2009: tools (ALT + T), Options, dial
"- WLM 2011: ALT + F, Options, Mail, compose. -
Hi Experts,
The scenario is:
When I open a report and set the prefix 'SET VARIABLE LOGLEVEL = 2, DISABLE_CACHE_HIT = 1;' then I save it. Then I close this specific report then reopen this report. The "SET VARIABLE LOGLEVEL = 2, DISABLE_CACHE_HIT = 1;' is not saved in the report in the section prefix in the Advanced tab."
Is there a way to save the LOGLEVEL VARIABLE SET = 2, DISABLE_CACHE_HIT = 1; in a report to get the request log?
Thank youHey,.
After he wrote the declaration of prefix.
You can click on "Sql Set" before you save the report.
After you set the sql and save the report.
Try restarting the services once more. And the report, check to see if your changes are saved.
-
Shuttle point - save the changes
The shuttle point integrated is a good way to view and edit data to multiple values. If the data comes from a single line and column (delimited), using the internal order process line Fetch and automatic DML to read/write, it work well.
But what happens if the data from multiple lines in a source table? Say 10 lines are selected (right hand of shuttle) off a 50 LOV. The Source of the element of the shuttle has just the query to retrieve the 10 lines and the APEX engine automatically converts multiple values into 1 delimited value required by the shuttle.
But when it comes to saving the changes in the shuttle, there is no easy way to identify what has changed. Say I deselect the option 1 and select 2 new items in the left side of the shuttle. Value of the element in the session state is delimited by colon 1 string containing the currently selected values. How this translates into the ELIMINATION of 1 and 2 INSERTs necessary against the base table?
I can think of to save the front-subimit value in a hidden element, comparing it to the value of after-submit and stuff like that, but that seems a lot of work. What this kind of thing done effectively?
Thank youHELEN wrote:
But when it comes to saving the changes in the shuttle, there is no easy way to identify what has changed. Say I deselect the option 1 and select 2 new items in the left side of the shuttle. Value of the element in the session state is delimited by colon 1 string containing the currently selected values. How this translates into the ELIMINATION of 1 and 2 INSERTs necessary against the base table?
I can think of to save the front-subimit value in a hidden element, comparing it to the value of after-submit and stuff like that, but that seems a lot of work. What this kind of thing done effectively?
As the table changed with the values of the shuttle contains one column other than the PK and the shuttle update column, this can all be handled with reusable one DML MERGE statement and a utility function:
begin merge into shuttled_states ss using ( /* The merge source requires a set of matched pairs: the selected shuttle values against the corresponding values in relevant DB rows, for example: shuttle_st db_st ---------- ----- X X -- X is in both shuttle selection and DB rowset Y -- Y is not in the shuttle selection but is in DB rowset Z -- Z is in the shuttle selection but not DB rowset We therefore need to leave the X row in the DB unchanged, delete the Y row, and insert the Z row. This query should also contain other columns and values required in matching rows in the merge, or in inserted rows. */ select shuttle.column_value shuttle_st , db.st db_st from table(string_to_coll(:p37_states)) shuttle full outer join shuttled_states db on shuttle.column_value = db.st) t /* Match conditions normally include matching PK and/or other values to get the relevant DB rowset, but the main requirement here is a predicate that matches using the DB value column from the shuttle/DB rowset pair. */ on (ss.st = t.db_st) when matched then /* This is where the restriction applies. Although we don't actually want to update any matched rows as they are unaffected by the shuttle selection, the MERGE can only delete rows that have been updated. However we can't update any of the columns used in the match, so there needs to be at least one column available that can be set to the same value to mark the row as updated... */ update set ss.state_name = ss.state_name /* ...which makes it possible to delete rows that are not selected in the shuttle. */ delete where t.shuttle_st is null /* Where there's no match the value is newly selected in the shuttle and is inserted as a new row. (Other values required should be included in the query, or handled in a trigger.) */ when not matched then insert (st) values (t.shuttle_st); end;
This method uses to transform the selected values shuttle of a string delimited by two points in a set of SQL. The function provided by Oracle apex_util.string_to_table returns a PL/SQL associative array that is not appropriate for this. If it is possible to convert a string into lines purely using SQL, these methods are rather obscure and only can be reused by cutting-and-pasting. A simple function that returns a collection of standard SQL type can be used as a set of rows in a query through the SQL TABLE operator and is highly reusable:
create or replace function string_to_coll (p_string in VARCHAR2) return sys.ODCIVarchar2List is l_table apex_application_global.vc_arr2; l_list sys.ODCIVarchar2List := new sys.ODCIVarchar2List(); begin l_table := apex_util.string_to_table(p_string); l_list.extend(l_table.count()); for i in 1..l_table.count() loop l_list(i) := l_table(i); end loop; return l_list; end;
For purposes of demonstration, this one uses the predefined sys . ODCIVarchar2List collection type. In real life, you would create your own, and of course the function would be in a package, not stand-alone.
-
Do you want to save the changes you made
Hi guys,.
I need your help
I ve a form that retrieve data on employees.
There are 8 blocks in the form,
I created a when trigger click mouse to display a LOV
declare
a Boolean value;
Start
a: = show_lov ('TEST');
pc_execute; -calling a procedure
END;
but it gives you want to save the changes you have made?
and I tried to delete it by setting the level of message system = 25
but no advantage,
And if I write:
declare
a Boolean value;
Start
a: = show_lov ('TEST');
GO_BLOCK ('ORG_EMP_INCREMENT_HISTORY');
pc_execute; -calling a procedure
END;
the message will disappear, but the query will run not all blocks
ANY suggestions
Best regardsEl-Hamdulellah
Pls to mark your Question and the correct answer...
and erase what was you meant to do?
To help others with the same problem...
Kind regards
Abdetu...
Maybe you are looking for
-
A Wi - fi connection starts [Mid2015 15 "MBPr, 10.10.5]
In the last 18 hours, I read a lot of discussion on a connection Wi-Fi-problems in Yosemite, and while I did find one corresponding symptom description, I tried each end (NVRAM, MSC, stolen prefs, command line, new location, new user... "I don't know
-
Hello My safari will display all the images, for example Google Logo, image profile of everyone here and much more. So I was wondering how I can fix this problem? Either way, I have 3 accounts on my computer, works on the other two, but not mine. Tha
-
Open g vi in the project folder
If I used a few open g vi and I want to include these vi in my project folder, so that all my vi are under the same folder. What is the best way to achieve this? What I have to do a source distribution?
-
Dv6535tx HP Pavilion upgrade to Windows 7 notebook. What softpaqs are needed?
Hi, I live in Australia & just got a laptop HP Pavilion dv6535tx of second hand on which the previous owner had installed Windows7 but no driver HP, so many things didn't work (e.g. fingerprint, Webcam reader), so I think that there will be others al
-
How can I check for Java