Change to Win 7 32 bit to 64 bit's Office also have both on the DVD?

Similar Questions

• Change to Win 7 64 bit to 32 bit

  Anyone have any ideas on how to change a lptop since Win7 64 bit OS to Win 7 32 bit. It would be a brand new computer so, in theory, that no software other files should be cahnged. But I don't want to buy another copy of the operating system and only new HP with the 32 bit OS computers are more expensive than 64-bit.

  Hello

  Sorry to say, but there is no way to change a 64 bits in a 32-bit operating system - the only way is to do a fresh install using a 32-bit installation disk.

  Kind regards

  DP - K

• WiFi work anymore; Win 7/64-bit; ASUS Zenbook w/Atheros; SSID of the network disappears & cannot be added manually network

  ASUS UX31E (portable) Zenbook running with an adapter Atheros WiFi Win 7/64-bit.  Netgear WNDR3700v2 router.  I'm the sysop House.

  Starting earlier this year, at the start, my home wireless SSID is 'seen' in the system as 'available' tray, but not connected.

  I try to connect, and it asks for the password (WPA2).  I enter the password, and it says that the connection could not be established.

  (I have three other machines of 7/64-bit Windows and Vista computers that connect wireless fine home).

  At this stage the SSID is no longer 'seen' in the system tray.  No wireless network is available, even if I'm 3 feet from the router.  (- I live in the country).

  Here's what I tried, which none have worked:

  > Run Wizard troubleshooting, including resetting the router.

  > Of course the WiFi card was activated.

  > Of course the adapter reported it was working properly, looked IPconfig & also checked for red flags in Device Manager.

  > Of course all the drivers are up to date and that all Windows updates have been correctly processed.

  > Tried to back off the WiFi driver, but no earlier version is available on the system.

  > Tried to use a previous restore point, but none worked.

  > Uninstalled the WiFi drivers and installed later from Asus support website.

  > Tried to run Norton Internet Security.

  > Erased partition o/s and restored as long as the plant.

  > Tried to run it before you reinstall Norton Internet Security.

  > Trudged through all the updates and I have tried several times more.

  Now in the center of network & sharing, when I try manually add my network - he said: "How do you want to add a network?" and I click on 'Manually create a network profile.'  I get "unexpected error has occurred."  This was not used to happen - I could add the network, but could not connect to it.

  -deb

  Hi Deb,

  Yes its possible that change the SSID will not work. WNDR 3700v2 offers however WEP? This is false.

  Go to wifi settings.

  This router has some firmware issues.

  So, try reloading the firmware.

  And then try without any security in your router.

  If his works then fine.

  If not then try to give address static IP on WLAN & try to connect.

  Best way to understand what question is to try with another card WIFI NIC (USB).

• Oracle Forms Win 7 64 - bit error INST-07407: unable to detect the platform of the machine or pieces of JVM

  
  I'll try to install Oracle Forms 11.1.2.0 on Win 7 64 bit and get INST-07407: unable to detect the platform of the machine or the pieces of the JVM.

  I followed the steps described in Oracle Forms 11.1.2.0 on Win 7 64 - bit bit JVM error but still unable to solve my problem.

  Here are the details of the version of the installed JDK.

  C:\Program Files\Java\jdk1.6.0_45 > java-version

  Java version "1.6.0_45".

  Java (TM) SE Runtime Environment (build 1.6.0_45 - b06)

  Java for 64-bit Server VM (build 20.45 - b01, mixed mode)

  C:\Program Files\Java\jdk1.6.0_45 > % java_home Echo%
  C:\Program Files\Java\jdk1.6.0_45

  C:\Program Files\Java\jdk1.6.0_45 > echo %path%
  C:\Windows\System32; C:\Windows; C:\Windows\System32\Wbem; C:\Windows; C:\Program Fi
  les\Java\jdk1.6.0_45\bin

  Installer: -.

  1 jdk-6u45-windows - x 64

  2 wls1036_generic.jar for 64-bit platform

  3 ofm_frmrpts_win_11.1.2.0.0_64_disk1_1of1

  Please advise. Thank you.

  I don't know if help.

  I have installed Oracle Forms 11 g on Windows Vista Home Edition (64-bit), had been an experience horrible (much testing), although eventually I got.

  If I'm not mistaken, I used this guide:

  Oracle WebLogic & Forms 11g Release 2 installation guide

• Satellite L750 - can I change for Win 7 64 bit and how?

  New Satellite L750 preloaded with windows 7.

  In the Setup process asked to choose the 64-bit or 32-bit operating system.
  Chose 32 bit and I am having second thoughts.

  I notice the difference? I can't change to 64 bit and how?

  Thank you

  > In the configuration of the process asked to choose the 64-bit or 32-bit operating system.

  Start the recovery process once more!
  Turn on the device, press F8 and choose fix my computer.
  Then the new window will open and there you can choose HARD drive recovery.
  Usually we have to ask once more what version you want to use.

• "Bluetooth"make it discoverable in my PC"option in Win 7 32 bit" is not available or cannot find the bluetooth settings

  Hi people, can someone help.  I am running win 7 ultimate (32 bit), never had a problem with the operating system to date.  I recently bought a dongle USB Bluetooth, plugged into a machine, my machine has seen and installed, but I can't enter Bluetooth settings in windows to make detectable windows?, is there a download link so I can recharge the missing or corrupt files of Microsoft?, the Bluetooth adapter did not come with any software and I tried the manufacterers website. Adapter BT-USB-M2 of www.Dynamode.com but the adapter works, I downloaded a third party software and still have problems, I think that windows add and install the adapter and see my headset via the adapter alone without software if I could only enter Bluetooth settings... that seems to be missing my version of windows?

  Help! stresses out me!

  Kind regards

  Guy

  Hi guy,

  Thank you for your update on the issue.

  According to my research, the Bluetooth is compatible to the Windows Vista operating system. Consult the following link:

  Dynamode: BT-USB-M2

  I suggest you to install the related software/driver in compatibility mode and check if the problem persists. You can check the following steps for assistance.

  1. Right-click on the downloaded driver file.
  2. ClickProperties , and then select the compatibility tab.
  3. Check enable the option run this program in compatibility mode for: , then select Windows Vista from the drop down.
  4. Click OK and install the driver.

  For more information, please visit: make older in this version of Windows programs

  Please post back your results for assistance.

• Satellite P755 - 11G: Win 7 64 bit - cannot activate BT after replacement of the module

  Hello

  On my laptop Satellite P755, I had to replace the Wifi/Bluetooth PCI Express Mini card because the original Atheros was broken and was no longer working.

  So I decided to buy a new Intel® Wireless-Dualband-AC 7260 card to replace.
  Has successfully replaced by itself.
  WiFi now works again.

  Now, I'm dealing to get BT running. With the old Atheros card I could activate BT by pressing FN + F8 and choose Bluetooth from the menu of flashcard on top of the screen.

  After the replacement of the F8 full option in flash cards had disappeared.
  I managed to solve the problem for the WiFi by adding the ID of the new material of the card Intel (PCI VEN_8086 & DEV_08B1 & SUBSYS_40708086) in the registry in the following locations:

  HKEY_LOCAL_MACHINE\SOFTWARE\TOSHIBA\ConfigFree--> InternalDevice176
  Hotkey HKEY_LOCAL_MACHINE\SOFTWARE\TOSHIBA\Wireless--> DevID_SupportRL175
  HKEY_LOCAL_MACHINE\SOFTWARE\TOSHIBA\WirelessAPL\BT WLANDP--> DevID_SupportRL176
  HKEY_LOCAL_MACHINE\SOFTWARE\TOSHIBA\WirelessDevice ID--> DevID_SupportRL176

  Now FN + F8 works very well for the WiFi, flash cards menu appeared again.
  But there is still no option to activate Bluetooth.

  Addition of the BT hardware in the registry (same locations as the WiFI) ID does not help.
  I can't get the point how the flash cards software manages to activate the bluetooth normally.

  Does anyone have an idea what it takes to get the Bluetooth in the menu flash cards?

  My system:
  Toshiba P755 - 11G
  Windows 7 64 bit

  See you soon,.
  Alex

  Hello

  You said that the original WLan module was to Atheros.
  As far as I know the module Atheros WLan additional needs for the installation of the filter for the Atheros BT driver package in order to use and activate Bluetooth.

  In the case of modules WLan Intel such package of filter is not necessary.

  I guess the Atheros BT filter driver package is always installed on this laptop and I think this might be the reason why the BT can not be activated properly.

  However, I recommend you to uninstall the filter BT mentioned driver package as well as Toshiba BT stack, driver Atheros WLan and the Toshiba value added package, and the Flash Cards Support utility. Clean the system using the CCleaner tool.

  Then install the Intel driver that would control the new Intel WLan card.
  Install the Toshiba BT stack and restart the device. Now follow with the installation of the Toshiba added value package and the Flash Cards Support utility. Reboot once again and check if you can use FN + F8 to activate WiFi and BT

• My computer recently started to freeze .i have win 7 64 bit pc. Ctrl alt PIF and the mouse do not work either. In the sound registry mainly id 10005 and event 7001

  For the error with the id 7001.

  "The network list Service depends on the network location awareness service which failed to start because of the following error:

  The dependency service or group was able to start. »

  -

  -

  7001

  0

  2

  0

  0

  0 x 8080000000000000

  60397

  System

  BazilAChaudhry

  -

  Network list service

  Network location awareness

  % 1068

   

  For the error with the id 10005

   

  DCOM got error '1084' trying to start the ShellHWDetection service with arguments "" to start the server:

  {DD522ACC-F821-461A-A407-50B198B896DC}

  -

  -

  10005

  0

  2

  0

  0

  0 x 80000000000000

  60391

  System

  BazilAChaudhry

  -

  1084

  ShellHWDetection

  {DD522ACC-F821-461A-A407-50B198B896DC}

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Put the computer to boot and see if the problem persists.

  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Note: follow step 7 to reset the computer to start as usual after the boot process.

  http://support.Microsoft.com/kb/929135

  Hope this information helps.

• HD has changed, now win 7 it says is not authentic but cannot run validator due to the error 0xC8000247

  Hello

  My hard drive died recently and I had 2 put new drives (RAID 1). However, windows (win 7 Home premium) I think that's not true, and when I click to solve, it downloads WindowsActivationUpdate which does not (error 0xC8000247). I'd appreciate any help to solve this!
  Thank you in advance.

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• HP Envy 17, Win 7 64 bit - how to re - install windows when the old hard drive failed?

  The laptop won't boot and drive fails Diagnostics to market. Restore does not work and take the hard drive on the laptop & connection on my desktop I can not access the recovery partition. The laptop is out of warranty.

  I have a replacement drive, but as I have no install disc and cannot access the recovery partition how can I reinstall the Windows OEM 7 new hard disk?

  Any help would be appreciated.

  If the full 25-character windows activation key is visible on the Microsoft Windows COA on your laptop, you can download an identical iso file from here and install Windows.

  Download the drivers from the HP support for your laptop computer portal. Put them on a flashdisk usb (USB key) for ease of installation.

  Use the Microsoft Windows 7 USD\DVD download tool and a 4 GB usb (thumbdrive) flashdisk for the fastest and most reliable Windows installation medium.

  The value in this way you can have your laptop in a usable state while you wait for your ordered recovery disk.

  Best regards
  ERICO

• Win 7 32 bit wudfsvc service does not start because the wudfpf driver is not loaded

  Hello

  I'm unable to connect USB devices like camera and phone the driver installation fails. The error can not remember (logging this from another machine) but something like "service not loaded or marked for deletion. Concluded that the Wudfsvc service is not started, even if it is marked as automatic. When I try to run it manually I get an error. Looking at the event log indicated that the dependent wudfpf driver is not loaded. I looked, and the driver is it physically in C:\WINDOWS\system32\drivers. Not sure where to go from here.

  Thank you

  Can you open regedit and navigate to the following registry key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\WudfPf

  In this key, in the right window, is an ImagePath value

  Are the data for ImagePath what follows? :

  system32\drivers\WudfPf.sys

• Win 7 64 bit worked until all current updates of the th? KB 2810046, Ko 2817360, KB2310138, Bing 1.2.nutts already installed sound keeps trying to reinstall every day bitch

  The system fails to recognize that the updates are already installed. What is the cause. Ditto 4 updates every day after day after day... redundant

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

• I just installed windows 7 (32 bit) and now I have installed all the drivers.

  Hello Sir/Madam

  My product number is A3U66PA #ACJ, OS is WIndows 7 Professional 32 bit.

  My problem is that when I installed all the drivers and tried to connect to my local network, he showed LAN not connected and when I open "Change adapter settings" them has no LAN icon.

  I went to Device Manager their ethernet controller driver showed not found error and the driver not found unknown device.

  Hello:

  The first is the Realtek ethernet controller wired.

  Here is the link to the driver for it.

  Download the 5th on the list (Win7 and WinServer 2008 R2 Auto Installation Program (SID: 1497589))

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  The second is the sensor hard drive protection.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-76187-1&cc=us&DLC=en&LC=en

  Paul

• I use the color picker to select a background color, then try to create a new document using this background color. The appearance of the color changing at this time. It is a new problem. I have successfully used the procedure several times in the p

  My background color changes when I try to apply it. I put the color using the color picker. Then I try to create a new document with the same background color. But that change of a very different color. What I am doing wrong? I've used the previous procedure, several times, without this problem.

  The new document has a different color profile. Make sure that they are the same.

  The same result of RGB numbers in different colors in different color spaces. Or in other words, the color space defines the specific color produced by a certain set of numbers.

• Win8 32-bit upgrade for win 8 64 bit

  I bought Win 8 32 bit via download using the wizard.  It's the right version for my computer and I don't have the disc.  Now, a few months later, my PC has melted and I am building a new machine 64-bit from scratch.  I was able to save the hard drive.  How to convert or move to Win 8 64 bit?  Do I have to buy the whole OS again, buy the correct CD and do a clean install, pay and repeat the download?

  Thank you.

  https://techingiteasy.WordPress.com/2013/02/14/how-to-migrate-from-32-bit-versions-of-Windows-to-Windows-8-64-bit/