Oracle Forms Win 7 64 - bit error INST-07407: unable to detect the platform of the machine or pieces of JVM

Similar Questions

• Win 7 64 - bit error 1402 Setup / Remove Programs r key blocked

  I tried to install MS Office 2010 and to install HP Officejet J4580.

  I tried to remove some programs.

  Win 7 64 - bit error 1402 Setup / Remove Programs r key blocked with unknown

  Hello

  1. do you receive the same error message when you try to install HP Officejet J4580?

  2 have you made any changes to the computer before the show?

  I suggest you follow these methods and check.

  Method 1: Run the application as administrator and check.

  Refer to this link: How to apply once with a full administrator access token?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-run-an-application-once-with-a-full-administrator-access-token

  Method 2: try to install using this printing software tool HP Officejet J4580.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Regarding the installation of MS Office 2010, you can visit this link and check if it helps. You receive an error message when you install an Office program or you open an Office program or a document

  http://support.Microsoft.com/kb/838687

  I hope this helps!

• a fatal error occurred while trying to sysprep the machine Windows 7

  Install a new copy of Windows 7 64-bit on a computer company dell laptop.
  After completing the installation, I used Windows update to get all the current patches and so forth.
  No other software has been installed. No antivirus at this stage.
  I have disabled the Windows Media Player Network Sharing Service
  I used the original sysprep on the W7 machine.

  I received this error message: a fatal error occurred while trying to sysprep the machine

  Log files show this:

  Setupact.log:
  2009-10-28 08:18:01, error [0x0e00ba] TOOL GeneralizeBcdStore: could not open the BCD to generalize object. Status = [0xC0000034] [gle = 0 x 00000012]
  2009-10-28 08:18:01, error [0x0e00b1] TOOL Sysprep_Generalize_Bcd: it was a mistake to generalize the bcd store. Status = [0xC0000034] [gle = 0 x 00000012]
  2009-10-28 08:18:01, error [0x0f0082] SYSPRP LaunchDll:Failure occurred during the execution of 'C:\Windows\System32\spbcd.dll,Sysprep_Generalize_Bcd', returned an error code 2 [gle = 0 x 00000012]
  2009-10-28 08:18:01, error [0x0f0070] SYSPRP RunExternalDlls: an error occurred running sysprep register dll, put an end to running sysprep. dwRet = 2 [gle = 0 x 00000012]
  2009-10-28 08:18:01, error [0x0f00a8] SYSPRP WinMain:Hit failure while processing sysprep generalize providers internal; HR = 0 x 80070002 [gle = 0 x 00000012]

  Setuperr.log:
  2009-10-28 08:17:54, error SYSPRP SPPNP: error 0 x 3 SDDL parameter on the C:\Windows\nvtmpinst\nvcpl.cpl driver file.
  2009-10-28 08:17:54, error SYSPRP SPPNP: error 0 x 3 listing locked files!
  2009-10-28 08:18:01, error [0x0e00ba] TOOL GeneralizeBcdStore: could not open the BCD to generalize object. Status = [0xC0000034] [gle = 0 x 00000012]
  2009-10-28 08:18:01, error [0x0e00b1] TOOL Sysprep_Generalize_Bcd: it was a mistake to generalize the bcd store. Status = [0xC0000034] [gle = 0 x 00000012]
  2009-10-28 08:18:01, error [0x0f0082] SYSPRP LaunchDll:Failure occurred during the execution of 'C:\Windows\System32\spbcd.dll,Sysprep_Generalize_Bcd', returned an error code 2 [gle = 0 x 00000012]
  2009-10-28 08:18:01, error [0x0f0070] SYSPRP RunExternalDlls: an error occurred running sysprep register dll, put an end to running sysprep. dwRet = 2 [gle = 0 x 00000012]
  2009-10-28 08:18:01, error [0x0f00a8] SYSPRP WinMain:Hit failure while processing sysprep generalize providers internal; HR = 0 x 80070002 [gle = 0 x 00000012]

  Questions about the deployment of clients in the domain is better handled in the ITPro Forums.

  These answers forums are more oriented to undergo only the consumer of system issues.

  Category: Windows 7 - ITPro.url

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• When I try to connect directly in multiplayer FSX without gamespy, every time I get an error message saying: unable to create the connection to the host.

  When I try to connect directly in multiplayer FSX without gamespy, every time I get an error message saying: unable to create the connection to the host.

  I need help
  Kind regards

  Thank you very much!

  To host successfully a FSX session what follows is the key enabling

  my client (s) to join my host FSX session!

  "Players Maximum (for a shared together plane 2) leave the locations reserved for friends to 0 set."

  6122 6112 UDP port translation FSX multiplayer traffic of my remote 2 wire gateway to my router Linksys Wireless N DMZ to access game FSX host...

  Only a single router in my configuration of the DMZ, the external network to the router,

  in this case, the 2 wires, had defined port forwarding.

  Am now enjoying Gamespy (R.I.P.) FSX free hosting for my MP FSX sessions via direct connection.

  5 high to the author!

• Kodak esp5250 printer 3520 error code unable to detect the edges of paper

  error code Kodak esp5250 printer 3520 unable to detect the edge of the paper?

  Please see

  http://support.en.kodak.co.uk/app/answers/detail/a_id/25352/kw/3520/selected/true .

• I am running vista ultimate SP2 32 bit. I'm unable to complete the installation. Support for koadak says that I need to update my windows install. When I go on the site microst, I don't know that one to download. Help!

  I am running vista ultimate SP2 32 bit.  I'm unable to complete the installation. Support for koadak says that I need to update my windows install.  When I go on the site microst, I don't know that one to download. I am running vista ultimate SP2 32 bit.  I'm unable to complete the installation. Support for kodak says that I need to update my windows install.    Help!

  Update your OS via windows update (start > Control Panel > Security > windows update).

• I tried to download the free trial version for creative cloud, and at about 40 per cent installed it says error ex 20 "unable to extract the files?

  I tried to download the free trial version for creative cloud, and at about 40 per cent installed it says error ex 20 "unable to extract the files?

  This is the temp folder permissions problem usually.

  Here are a few solutions, Re: creative cloud hangs at 42%

  You can also consult Re: creative cloud hangs at 42% why? WINDOWS help links.

• Tecra A11 - VAP installation failed on Win 7 64 bit error 0x8146045B

  Hello

  I need help. The flash on my phone card tool was out of use. I downloaded the value added package in the 1.3.5 version and tried to install. Installation fail after having extracted the Exe file compressed with the error "Setup PVAT error. [0x8146045B] ". I thougt the error may occure while I not remove the installed software before. So I uninstall the value-added package. After reboot and without installation of value added new package the same error.

  How can I install value added package again?

  Tecra A11, Windows 7 64 bit

  Concerning
  TS

  Hi TSAGI,.

  I had a similar problem with the package of added value, so I also removed the previous version first. But after the reboot, I used the freeware CCleaner tool to clean the registry and delete the old keys of VAP. So just download CCleaner and run it, after this restart again and try to install VAP.

  Check this box!

• WiFi work anymore; Win 7/64-bit; ASUS Zenbook w/Atheros; SSID of the network disappears & cannot be added manually network

  ASUS UX31E (portable) Zenbook running with an adapter Atheros WiFi Win 7/64-bit.  Netgear WNDR3700v2 router.  I'm the sysop House.

  Starting earlier this year, at the start, my home wireless SSID is 'seen' in the system as 'available' tray, but not connected.

  I try to connect, and it asks for the password (WPA2).  I enter the password, and it says that the connection could not be established.

  (I have three other machines of 7/64-bit Windows and Vista computers that connect wireless fine home).

  At this stage the SSID is no longer 'seen' in the system tray.  No wireless network is available, even if I'm 3 feet from the router.  (- I live in the country).

  Here's what I tried, which none have worked:

  > Run Wizard troubleshooting, including resetting the router.

  > Of course the WiFi card was activated.

  > Of course the adapter reported it was working properly, looked IPconfig & also checked for red flags in Device Manager.

  > Of course all the drivers are up to date and that all Windows updates have been correctly processed.

  > Tried to back off the WiFi driver, but no earlier version is available on the system.

  > Tried to use a previous restore point, but none worked.

  > Uninstalled the WiFi drivers and installed later from Asus support website.

  > Tried to run Norton Internet Security.

  > Erased partition o/s and restored as long as the plant.

  > Tried to run it before you reinstall Norton Internet Security.

  > Trudged through all the updates and I have tried several times more.

  Now in the center of network & sharing, when I try manually add my network - he said: "How do you want to add a network?" and I click on 'Manually create a network profile.'  I get "unexpected error has occurred."  This was not used to happen - I could add the network, but could not connect to it.

  -deb

  Hi Deb,

  Yes its possible that change the SSID will not work. WNDR 3700v2 offers however WEP? This is false.

  Go to wifi settings.

  This router has some firmware issues.

  So, try reloading the firmware.

  And then try without any security in your router.

  If his works then fine.

  If not then try to give address static IP on WLAN & try to connect.

  Best way to understand what question is to try with another card WIFI NIC (USB).

• Error when viewing PDF forms: "Windows received an HTTP error message: 403 (refused) of detected «perass.state.nm.us»»

  Received an error message where it says "Windows received an HTTP error message: 403 (refused) of detected 'perass.state.nm.us'. '.  I get this error message after connecting and trying to open/view the forms in PDF format.  Can anyone help?

  Original title: problem display forms in PDF format after connecting to the site of Governor

  Hey Ern,

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. You made any hardware or software changes the computer recently?
  2. You have a wired or a wireless connection?
  3. You have a router connected to the computer?

  The question could arise if it is missing or damaged Internet Explorer files that the display of the script on the page or if the Hosts file is damaged or contains incorrect information. To resolve this problem, I would suggest trying the following methods and check if the problem persists.

  Method 1:

  Try to start the system in safe mode and check if the number is reproduced. If this isn't the case, then clean the computer starts and check if that helps.

  Step 1:

  Safe mode is a diagnostic mode in which you are connected with only the minimal necessary services and active pilots. Check if the number is reproduced.

  Start your computer in safe mode

  Note: In the advanced startup options, select safe mode with network .

  Step 2:

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.
  How to perform a clean boot in Windows

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  If the problem persists, try the following method.

  Method 2:

  Read the following article and check if it helps.

  Get help with the Web site (HTTP error) error messages.

  If the problem persists, try the following method.

  Method 3:

  1. Go to Start, click all programs and open the Accessories.
  2. Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, click OK, or alternatively click on Yes.
  3. In the command prompt, type the following commands and press ENTER after each command:
     ipconfig/release
     ipconfig/renew ipconfig/flushdns
  4. Close the command prompt and restart the system.

  See if the problem is resolved.

  If it is not resolved, follow these steps if you are connected to a router.

  1. It turn off, unplug, unplug it and wait 5-10 minutes.
  2. Shut down the computer.
  3. Wait 5 - 10 minutes.
  4. Reconnect the router, restart the router and don't plug it in yet.
  5. Start your computer, connect to Windows and connect the router to the computer.
  6. Try to connect to the Internet.

  If the problem persists, try to update the firmware on the router, you can get this update from the manufacturer's Web site.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Customer HFM 11.1.2.2 error - "cannot continue - unable to load the resource file.

  Version: 11.1.2.2.306

  Desktop Client (11.1.2.2) installed and when I try to open the client I get an error message saying

  "Cannot continue - unable to load the resource file.

  Note: I have uninstall and installed once more, still the same error and I tried to install 11.2.2.000, 11.1.2.2.306 customers HFM, still useless

  Please suggest

  He worked installing Client HFM 11.1.2.2.306 64bits, previous, we tried 32 bit that, reason why the origin of this problem. Now resolved.

• Error 'nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll is not found"when you connect to the computer.

  Original title:

  Problem: I use DeLL Desktop.When I connect, these messages appear on my screen: nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll not found. Re-installing the application may fix the problem. Pls help. Thank you.

  Hello
  1. what version of Windows is installed on the computer?
  2. are you aware of any changes made to the computer, before the show?
  Assuming you have Windows Vista or Windows 7, follow the steps mentioned below.

  Method 1:
  

  Step 1: Perform a boot minimum troubleshooting and check which application reports this error
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: once you have determined the problem by using a clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

  Step 2: reinstall the application.
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Method 2:
  Run an analysis of auditor of system files on your computer and check for the issue.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  I hope this helps.

• You can determine whether 32 or 64 bit Vista product key or serial number, the machine does not start?

  You can determine if 32 or 64 bit Vista product key or serial number?  The machine does not start and I need to order the OEM from HP recovery disk?

  Hello

  HP will know when you give them the serial number of your machine.

  They should have a record of it.

  See you soon.

• Oracle Forms 11g - ORA-12154: TNS error

  Well, until I post my info, I searched and searched all over Google, OTN, Experts-Exchange, etc... to try and figure this one out and I am puzzled. So here goes. I get the dreaded ' * ORA-12154: TNS: could not resolve the connect identifier specified * "error. This is my environment:
  
  ----------------------------------------------------------------------------------------------
  Server: Red Hat Enterprise Linux 5 version performs the following:
  Oracle Database 11g (Rel 1): 11.2.0.10
  Oracle Fusion Middleware 11g (rel. 11.1.1.2.0) Forms Server
  
  I can connect via SQL + no problem
  ----------------------------------------------------------------------------------------------
  Client: My Windows XP Professional PC.
  
  I can't TNSPING the SID of the database, no problem.
  I can connect via SQL + no problem
  I can connect via TOAD to the db without problem
  I can connect to Oracle Enterprise Manager through the web interface, no problem
  
  I have 2 houses Oracle (Oracle 8.0.6, Oracle 11.1.0.1) on my PC. The current House is currently the 11g one. I have my background on my PC Setup very well.
  
  The problem is when I try to run an example of form through the web, I created, the login prompt appears and I get my name in username/password / database SID and it is, I get the error. Of the clues as to what I should look for? Ultimately it is an application that all users will access and they should not have to worry about anything whatsoever to have installed on their PC.
  
  Thank you

  Keep in mind that file tnsnames.ora forms 11g is under $ORACLE_INSTANCE/config

• win 10 64-bit error 0xc0000142 trying to open

  I have installed Premiere Pro 2015 CC on a new installation of 10 64-bit windows.  When I try to open it, I get the message that the application could not be started-(0xc0000142).  It works fine on my 64 bit Windows 7 computer.  Put in Compatibility Mode for Windows 7 made no difference.

  I have uninstalled, reinstalled, downloaded and installed it again.  I get the same result every time.

  HP Pavilion DV7-4065dx

  8 GB Ram

  AMD Phenom II processor 3

  Intel graphic chipset

  Help someone?

  DCAudio

  Hi Dave,.

  Update for Premiere Pro CC 2015 (9.2) for a fix.

  Thank you
  Kevin