Change Type card for BC!

Similar Questions

• Anyone know where you are going to change credit card for your membership information

  where are you going to change credit card. I changed it for a few products, but no link to change other adobe products in my account

  Manage your membership and your payment. Creative cloud

  https://helpx.Adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting-creative-cloud.html

• Airport Extreme connected to TIVO: why I can not change Type firewall for IPv4.  Field displays IPv6 and is grayed out so I can't change.

  TIVO requires certain ports to be unblocked.  So I try to add the ports requiring TIVO.  But when you try to add the default Type of firewall IPv6 Port Mapping ports and I can't change the value of the IPv4 Port Mapping because the input field is grayed out and no is not accessible.  With Port IPv6 mapping I enter values in all areas except for the IPv6 address because I do not know what value to enter.  I think the button 'save' ' is not available to hit because the IPv6 address field is empty or not valid.  Note: my router Mode is ' Off (Bridge Mode).  Same questions if my router DHCP Mode.

  I changed my router Mode DHCP and NAT, then on the Type of firewall on the default page add ports, IPv4 Port Mapping and I could add ports but with this setting, I couldn't connect to internet in my Airport Extreme: my status remains orange light flashing.

  I use Comcast and my Airport Extreme is connected to my Comcast router using ethernet.

  I use my Airport Extreme as a router (wired and WIRELESS) and as a backup device.

  My TIVO is connected to my Airport Extreme using ethernet.

  How can I add the Ports requiring TIVO.

  Golden in the networking rule. ....... Never try to configure port mapping when you have two devices on the same network the two acting as a router.

  Unfortunately, this is exactly what you're trying to do.

  You have three options:

  (1) run the Comcast router "as what" and configure the port on the device of Comcast mapping... .the airPort Extreme must be configured in Bridge Mode when you do this.

  (2) lance to the AirPort Extreme router Mode of DHCP and NAT and configure the ports on the airport map... the peripheral Comcast must be configured to operate as a simple modem in Bridge Mode when you do this. 

  
  

  (3) lance to the AirPort Extreme router Mode of DHCP and NAT and configure the ports on the airport map... swap Comcast modem/router you have now for a simple modem (it will have only a single Ethernet port).

  In other words, either the Comcast is defined as the router and AirPort Extreme is in Bridge Mode... or... the AiPort Extreme is configured as a router and Comcast must be configured in Bridge Mode.

  If you choose Option 1, then we can not help you on a matter of Comcast router. In bridged Mode, the AirPort Extreme requires no configuration.

  If you choose Option 2 or Option 3, then we the following port values that the Tivo device needs:

  Public or UDP ports

  Public TCP

  UDP private

  Private TCP

  In addition, you need to find the MAC address for the TIVO.  It is a long code that looks something like this, for example:

  A1: B2: C3: D4: E5: F6

  A link to the Tivo instructions for port mapping would also be very useful.  I have done this with a TIVO in the past, but is for some years.

  If all goes well, an expert of TIVO will post to lend a hand.

• Re: How to change the RAM for internal video on the Satellite A665-S5060 card?

  Hello

  My question is how can I change the RAM for my internal video card? I found I only 64 and I want to change it to 256.

  I don't want no heavy games, I just want to change to 256.
  I tried to change it by accessing the BIOS, but I had no luck with it, no option for this, another way, I could do?

  Thank you!.

  Hello

  > my question is how can I change the RAM for my internal video card? I found I only 64 and I want to change it to 256.

  No, you can not do it yourself. The system will automatically change to the need for more ram.

• Impossible to change the credit card for future payments. System will not change. [was: Director of the CC company]

  We must CHANGE our credit card for future payments and it does not change it on the line.

  This is an open forum, not Adobe support... Click below to contact Adobe staff for help

  While the forums are open 24/7 you can't contact Adobe support at any time

  Chat support: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• I changed my card paymant and there is no progress, I still see information DAY for changes in payment options.

  I changed my card paymant and there is no progress, I still see information DAY for changes in payment options.
  I connected, changed all the infro on my master card... How to upgrade?

  Please contact customer service in order to update the payment details. You can use: http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

• Inadvertently, I had a graduated filter changed all 326 images in my folder. How can I remove this change of images without affecting other types of changes, I did for the other images?

  Inadvertently, I had a graduated filter changed all 326 images in my folder. How can I remove this change of images without affecting other types of changes, I did for the other images?

  Select all images, ensuring that you are in the develop module. Auto-Sync lights up and then just delete the graduated filter. You will need to activate the graduated filter tool and click on the PIN for the filter you have defined and then press the delete key. Then, you want to disable automatic synchronization. Now, just highlight the image you want to add the graduated filter and do your thing with her.

• How can I change the credit card for automatic payments?

  How can I change my card number credit or debit on my account for automatic billing? My account has been compromised, and I need to change the map that I use.

  Hi Villabolo,

  We apologize for the inconvenience,

  would call you or chat with our helpdesk

  Contact no to our helpdesk: 1800-833-6687

  To Chat please click on http://helpx.adobe.com/contact.html (the steps)

  Let me know if you still not able to change your contact information

  Kind regards

  ~ Dominique

• How can I change the credit card for auto-pay information?

  How can I change the credit card for auto-pay information?

  for creative cloud: http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting-creative-cloud.html

• How can I change my number of credit card for my Adobe ID?

  Hello

  I would like to change my credit card number, but the Adobe site do not allow it.

  Support cat redirect me to a Chinese adobe page (I'm from the Hungary, cannot read Chinese..), then told me to call the local dealer support instead.

  Local support dealer told us that they cannot support the members of creative cloud, they are processed centrally by Adobe.

  Back to cat, again describing what I need a new agent...

  Got the same Chinese page him too well at first, then got the same advice 'call the local dealer' yet.

  After telling the agent that does not work, he gave me a phone number to call: 852 2916 2125, which never answers. And the agent has fallen ...

  I was not so much depressed on a support customer for years.

  Can someone please help me on how to change my number of credit card for my Adobe ID?

  Thanks for any useful help in advance.

  @mike cardeiro - the help document on changing billing is here http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting-creative-cloud.html #id_41289. If you have a problem like that reported lack of cloud Ltd, then clear the cache and cookies of your browser, restart the browser and try again. You can also try a different browser. You shouldn't have a problem, but I just wanted to notice how badly pushes the question where you do.

• "PP can now take full advantage of the PC with several GPU cards for export substantially accelerated time"

  On the features page Adobe clearly shows:

  Export multiple GPU support

  Premiere Pro can now take full advantage of computers with multiple GPU cards for export substantially accelerated time. Rendering and compression just got a whole lot faster.
  
  

  Can someone PLEASE be very specific as to how it works with the new 2015 CC?  I just bought my 2nd GTX 970 and SLI it had.  Now I read a lot of conflicting testimony online and can't seem to get a straight answer.  Please don't refer either items that are either outdated or forums.  Adobe CC 2015 was just released there not too long ago, which is what this new feature.
  

  Is having two 970's beneficial for first use SLI and AE?  Can I use the SLI bridge or not?   Can I turn in NVIDIA SLI Control Panel?  Or did I frankly just lose $330?

  Any educated idea would be GREATLY appreciated to help relieve this anxiety.  Thank you...

  
  
  
  

  Eric Bowen of computers ADK is frequently here on this forum, and with Bill Gehrke, can give you the best technique advises compared to your current and future workflow exact. Change style and which codecs you use are very important.

  Given that you JUST improved don't panic... There are a few simple adjustments, you can do to get the most out of your current equipment.

  1. make sure your Samsung 850 pro has ONLY your operating system, programs and Windows swap file on it... nothing more. Turn off "Indexing" for all your disks in the system. You will need a separate and quick 'reader' for ALL your other files (images, previews, projects, export, media cache and cache files). The IDEAL reader for this is the new SSD Samsung SM951 PCI, which runs more than 1.5 GB/s.  The performance is going to be super fast. the use of this drive, but its capacity is LIMITED. You would then be advised to add drive hard level of large companies 'offload' all files to the guard. These recent hard drives crashed at 200 MB/s with a 128 MB cache on them and go up to at least 6 TB of size... they are not expensive.

  2. your CPU is designed to be overclocked... TAKE ADVANTAGE of that and try to get the highest stable frequency, you can with it, ensuring that you use a good cooling solution--probably water. Performance will get a significant boost of this MOST important factor.  Of course, your CPU has "only' '8 processors" with hyperthreading from the end superior Haswell E CPUs that can give you sixteen YEARS... but, SPEED of CPU CLOCK is KING and will affect your performance because MOST of the video are processed ONLY with the CPU. NVidia GPU support will BE GREATLY whenever SPECIFIC on your timeline functions are those which can be CUDA accelerated... i. e "scaling", "ultra key", "dissolves" and a host of effects and other features. When it is the GPU CAN speed up the heavy calendar saturated with CUDA effects by a factor of TEN TIMES when "made this preview," or, "exporting media" your CPU has a stock speed of 3.6 Ghz and will be turbo up to 3.8 on all 4 cores. MANY users are overclocking your processor to a stable 4.7 Ghz... Some are more than 5 GHz! You can see that an increase of a full Ghz would give you about 20-25% performance... it's a LOT!

  It has been said here on this forum that once the processor is more than 4 GHz, it's OK even to 4K.

  However, I've ALSO seen here, (Eric, I think), that certain types of 4K really needs to have a GPU that has a minimum of 4 GB of memory DDR5 video memory due to "frame problem", or "frame buffer".    Thus, a return of the 970 s and KEEP one, (if it has 4 GB of video memory or more). Use the return to SM 951 drive.

  3. make sure all your settings are properly defined. In Windows, power settings make sure that all settings are for OPTIMAL PERFORMANCE so that Windows reduce NOT anything automatically... I learned this lesson on my laptop... the DEFAULT settings have been throttling the CPU and the GPU all the time until I fixed it!

  Then, first, make sure that you have the correct settings to allocate the amount of memory for first use... Eric has said here, it should be at least 3 GB by thread (I think... it can called ' base'...) I forgot). In YOUR case it means assign 24 GB of system memory for first, (8 'threads' x 3 = 24 GB). The rest can be defined for use in 'other programmes' of course, you can experiment and increase the amount of 3.5 or another higher.

  4. do not panic... Bill and I have the same laptops Asus who two years now with the 765 m 2 GB NVidia GPU in them and the HQ of 4700 i7 CPU. We shitcanned included and 5400 RPM hard drive and we both installed two quality SATA III SSD in each of the two hard drive bays. We also each increased the memory of the laptop to 24 GB. Bill has already done a few projects 4K basic on his laptop and I have experimented with 4K on mine. On my laptop, basic editing is not a problem with 4K, but addition of video tracks and effects slowing it... However, the chronology which fixes not making it. YOUR machine correctly overclocked, with more memory than we and a SM 951 and a GPU 970 should do very WELL at the moment... I think.   Unless you want to spend 4 to 5 $000 on a new machine of Haswell E X 99!

  p.s. If you are working with 4K and 1080 p quality, you need a couple of good monitors. I recently bought TWO 27 inch Acer IPS monitors that are WQHD, or, 2560 x 1440 p in the resolution. They were rated very high in addition to a review and are IPS... the density of pixels is IDEAL... to 27 inches, 1440 p video looks LIKE 4 K!   The quality of the color and the image is amazing. My laptop powers BOTH monitors at full resolution! We use HDMI 1.4 and the other the 'mini displayport' 1.1 connection... (which is also called Thunderbolt version 1). This monitor is only $200 on the egg, (including a $50 discount). Others in this class are 6 to 7 cents.

• I HAV been trying to update my expiration date of credit card for 3 months.  When I go to lelien for "Update payment Details" and edit the expiration date and &lt; click &gt; save, I get an error saying my address in invalid.  I have several chat sessions

  Can someone please help...  Suggestions, how can I overcome this problem, in which case my Adobe Creative cloud subscription will expire today due to and credit card.

  I tried to update my expiration date of credit card for 3 months.  When I go to the "Update payment Details" link and change the expiry date then < click > save, I get an error saying my invalid address.  I had several chat sessions with support, called support and logged a ticket with support and every time they tell me to go to a particular link to update my contact information.  I do and I get the same error...   "My coordinates are not valid."  Now I'm in the position where my creative cloud membership will expire today everything simply because the Adobe address validation do not think that my address is valid.

  I got 'Cat' sessions with the support,

  I made a phone call to the support and

  I logged a ticket with support.  I'm really trying to pay my subscription.  Support ticket No. 0216009991

  Whenever I have contact the support they gave me a link to the site where I supposedly can I enter my credit card details.

  Whenever I went on the link provided, I'd get the same error.  "My coordinates are not valid."

  What I checked on my address.

  1. I look out the window and the view I get is the same as it was yesterday and the day, and in fact several years ago.

  2. I go out in the street, Yes, the street sign says the name of my street

  3. I go to my mailbox and it does not say the number of my mailing address

  4. yes I get the email to the address registered with Adobe

  5. yes I received the email from adobe delivered to the address

  6. I get the address of Google, yes I can find it on Google

  7. I converted to use the satellite view Google maps

  8. Yes, it's my house, with the 12 solar panels on the roof

  9. Yes, that's my black car in the driveway

  10. I check my reviews for my address Board rate, Yes, this is the address that I recorded with Adobe

  11. Yes, I had this same address registered at Adobe for the past 3 years.  So far I have not had a problem with my address

  12. I work with a software company that actually uses the address of Google, under license validation, built-in in their application.  I used this software to check to see if my address is recognized as valid.  You guessed it is recognized as valid.

  I did check my credit card

  12. Yes, I have, every time checked the status of my credit card with the Bank

  a. the card is valid

  b. the card's not over it's credit limit

  c. the card is not due

  d. the address registered to my credit card with the Bank is the same address that I recorded with Adobe

  Since the last link Adobe support gave me two weeks ago, to change my credit card details, I was able to key a new credit card in the fields (Yes it's good that I was forced to get a new credit card only for Adobe!   If I am that everything would be fine.

  But wait...   The details I provided this link have not been updated on the Adobe site.  (So I check the link... I was scammed to get my card number?)

  After investigation of the link, I'm fairly confident of the link provided is a true link to Adobe.  www.adobe.com/go/Secure

  Did anyone else had this type of problem when you try to update the expiration date of a credit card?

  The question is about to have an impact on my ability to process pictures for my photography business, it affects my ability to earn an income.

  So you could say I'm getting angry some of the stuffing!

  In summary...  I knew that my credit card had a new expiration date and I tried to update the expiration 3 months 3 months.

  Simply because the use of the validation of addresses, Adobe, has a few flaws, I was not able to update this information.  So Adobe today will stop my subscription.

  As I said in previous support tickets, chat sessions and telephone.  I'll be more disappointed if I am prevented from using software and Adobe cloud features.

  It is copied from an email I received during the night from Adobe...

  Continue to create with us

  Hi Thomas,

  Your Creative cloud membership will expire on August 23, 2015 (PT). We hope that you have been getting the best out of all that creative cloud has to offer. To extend your subscription, please update the billing for your account information, or add a prepaid card.

  Update your billing information (there is a link to where I can update the expiry date) pocztek sigh...   I still get the same error telling me that my address is not valid!

  Thank you for being a part of the creative cloud,

  The creative team Cloud

  Good creative team...  I REALLY WANT TO STAY IN THE TEAM, AS YOU CAN SEE FROM THE FOREGOING, THAT I REALLY TRIED TO SOLVE THIS PROBLEM SEVERAL TIMES OVER THE PAST 3 MONTHS.

  I tried to include as much information as possible in what I said earlier, I expressed in a way that will hopefully provide a little humor, but at the same time to portray the frustration I'm feeling right now.

  Honestly, I don't know what more I can do.  It seems that I have no other recourse start litigation for loss of income coming from Adobe address Validation errors.  There is a real chance that I will be litigated against because I won't be able to complete contracts.

  There must be a healthier solution of mind that court proceedings.

  Kind regards

  Thomas Croll

  (Tom)

  Tom, let me some time. I I will get these verified case and will contact you.

• How can I change the setting on my Apple to change the settings for automatic renewal at normal setting

  How can I change the setting on my Apple to change the settings for automatic renewal at normal setting

  I get a fresh fresh message on my credit card and I need to stop this setting automatic renewal for apple applications.

  If you mean cancel the renewal auto-renewal subscription and then follow these instructions: view, change or cancel your subscription - Apple Support

  (I asked for your message to be moved to the forum of the iTunes Store, where you have posted is for questions about the iTunes U app.)

• Best graphic/video card for my mac

  Hi people, I would like to know the last vid card which could be used for this old mac intel. any help would be appreciated, and thank you very much in advance

  The product identifiers
  Brand	Apple
  Family of products	Mac Pro
  The model ID	MacPro1, 1
  Model number	A1186
  Motherboard
  Video output interface	PCI Express
  Ports of e/s motherboard	FireWire (IEEE1394a) x 2, FireWire (IEEE1394b) x 2, RJ45 Lan Port x 2, USB 1.1 x 2, USB 2.0 x 5
  Bus speed	1330 MHz
  Technical characteristics
  Expansion bays	2 x 3.5 "(accès externe), 2 x 5.25" (external access), 4 x 3.5 "(internal access), 4 x 3.5" third-height (internal access)
  Expansion slots	PCI Express x 16 x 1, PCI x 3
  Hard drive
  Hard drive interface	Serial ATA
  Memory
  RAM technology	DDR2 SDRAM
  Max RAM taken in charge the size	32GB
  Memory RAM Slots Qunatity	8 x DIMMS
  Max cache	8 MB
  Video
  Video outputs	DVI x 1, x 2, Mini-VGA DVI
  Audio
  Audio input	Line (3.5 mm), stereo input jack
  Audio output	Analog Audio, headphone, Line-out, speaker (s)
  Networking
  Data link protocol	Ethernet
  Networking type	Dual integrated 10/100/1000 network card
  Dimensions
  Depth	18.7 in..
  Height	20.1 in..
  Width	8.1 in..
  Weight	42.4 lb.
  Various
  Form factor	Tour
  Release date	August 2006
  Exterior color	Silver
  Other features	64-bit Ready, virtualization technology

  http://www.macvidcards.com/index.html

  Tip: Mac cards replacement Graphics Pro money Tour (2006-2012)

  graphics card for Mac Pro system 2006-07

• Satellite C650D - driver graphics card for Win XP

  Hi all

  I deleted my newly bought laptop Windows 7
  Mainly because I'm very comfortable with XP and don't want anything too flashy with RAM

  Now, I installed XP and all the drivers are good with the exception of the video
  It doesn't seem to be a compatible video driver for Win XP and although I found 1 somewhere on the net the mobile installs it and then nothing happens... Center of how ATI catylist or something...

  Any suggestions?

  Thank you kindly

  Jonathan

  Hello

  On the European driver Toshiba page I could find a driver for graphics card for Satellite C650D
  [ATi Display Driver v8.723.2 | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 312 & selProduct = 5388 & selSh ortMod = 984 & language = 13 & selOS = all & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 2 & ID = 76170 & OSI D = 10 & driverLanguage = 42]

  I recommend you this driver.