change USB mode

Similar Questions

• Structure of the menu of the Sansa Clip +: change USB Mode no display

  Hey,.

  I have a Sansa Clip + with a display of death.

  I need to change the USB Mode of DPW, Meteorological Service of the Canada.

  Can someone please tell me the structure of the menu in order to change the USB Mode put down using the screen?

  Other clues would be appreciated.

  Thank you!

  I just found the solution:

  Sansa Clip +.
  1. turn off the device.
  2 press and hold the Center button while connecting the device to the computer.

  http://KB.SanDisk.com/app/answers/detail/A_ID/61/~/enabling-or-forcing-MSC-mode-on-your-Sansa-player

  So now I can install Rockbox and set up the clip + so that it displays all the entries menu...

• Impossible to change the mode of the transceiver (4-wire 2-wire) for 485 USB serial port

  I'm trying to set up a USB-RS485 device, according to this knowledge base document:

  http://digital.NI.com/public.nsf/allkb/1D516C10D7EDFAC6862571110073B8F4

  However, all advanced under the port com series options are grayed out and is not possible to change the mode of the 4-wire 2-wire transmitter/receiver. How can I activate these?

  Thank you.

  On Windows Vista and later versions, these settings can only be changed in MAX as an administrator. Just right-click on the icon and choose 'Run as administrator' and everything should be made available to you.

• Problem with the files not showing (after changing the USB mode)

  I have a sansa fuze 4 GB. version V02.01.09A. OS: Vista Service Pack 1. My rocket was working fine until about a week ago, when it stopped charging. but after installing the new norton 360 sansa is more appeared in my computer or Windows media player at all. I tried updating the driver but it says that the pilot was already up to date. I tried other USB ports again (front and rear), did not work. I decided to change the USB mode and it has finally started to load again in MSC mode.

  now, for the problem I currently have and, when I click on sansa via my computer and go to the music folder, it says "this folder is empty". I unplugged and watched in my music list, and all the music is there. I tried to put a new song on the player, disconnected, and when looking through the songs of the player the new song is here. I reconnected it, the new song is in the music folder, but the other songs are not listed. In addition, I have a microSD card that is listed as "o" in the car, all the songs I had on this appear, but not those on memory internal to the sansa.

  How can I get again list all music files in the folder?

  Note: I do not sync as it has only some of the songs I want on my sansa. the way I add songs is to copy and paste to the folder of the sansa player

  Okay, I don't know why or how, but it works now in MTP mode. I saw you are solutions, but I decided I'll just change the mode before trying to have ideas. until I reconnected it I also removed the microSD card, and it worked perfectly (make a backup of my songs). the problem could have the sd card in all this time?

• No USB mode choose?

  Hello, I want to hook my m4 Xperia radio with usb, but first, I need to change the mode (file type, by default on SD card, don't ask me because I am not an expert but I know what to do). So the problem is theres no option to change my phone it don't miss (how?). I'll upload screenshot soon.

  Hello

  I'm afraid there is no setting to change the USB connection mode. The phone only supports MTP as connectivity USB mode.

• Which drive external HARD support all of the settings to change the mode 'sleep'

  Hello

  Could someone tell me the current disc toshiba external hard with all the parameters to change sleep mode? Or disable at least.

  THX

  Hello

  Power options are not controlled by external HDD but Windows OS.
  Akuma is right; Configure the settings power Windows 7 in order to disable and enable the mode 'sleep'.

  Welcome them

• try to change the mode of feeding for a user account, the instructions worked to change the administrator account, but changes do not appear on user accounts.

  On my HP 510 laptop, I want to change the power mode to one of the user accounts.  It cannot be changed of in the user account, so I followed these instructions: log in as administrator, do the selection desired in the list of available eating patterns (Control Panel, Power Options, eating patterns), click on apply, then log in as administrator.  I find that the selected power mode has been applied to the administrator account, but not to one of the user accounts. I tried to change in the user account, but still receive the "access denied" response

  I recently installed Microsoft Security Essentials. My reading of various internet stations indicate that some older antivirus programs may have hindered this process of power management. I was not able to discover how to inactivate Security Essentials, so did not try to change the mode of power without interference from her.

  Another indicated position of the potential interference of the BIOS settings. I don't know how to check if this may be the case. I have MS Windows XP Pro SP3 installed. I have automatic and current updates.

  Thanks for any help, you can suggest.

  Hello

  You can change the setting in see Group Policy for this document:

  http://TechNet.Microsoft.com/en-us/library/cc730920.aspx

  Or change temporarily the user to an admin account, make the changes and then return as a standard user.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Sansa e280 is not usb mode in the menu settings and is not recognized by pc

  My sansa e280 is recognized by my pc where it was originally regestered, but is not recognized by another identical pc. It also has no usb mode in the settings menu, so I couldn't use the suggested by forum solution.

  Thank you very much! I understand it on my own through the main page of Sansa.com. Now, after the last firmware download it has 3 settings/USB modes: detect the DPW, msc and auto. Still no problem on my PC. The another, unfortunately, is 5000 miles away. Hope, it will work here, too. Thanks again.

• How to register for an event when the device is connected to the PC in USB mode or sync

  I develop application on blackberry with phonegap.

  I want to hear event when the BlackBerry device is connected to the PC by USB MODE or sync.
  I saw mediagallery and applications Filemanager showing the dialogue that the application cannot be used when connected to the PC in USB mode.
  I want to display dialog similar to my request.
  Can anyone please help on how to do it.

  I saw blackberry webworks API

  public static Boolean blackberry.system.isMassStorageActive)

  who says if massstorage is active or not.

  But I can't keep on request this API every time. I'm looking for an API that gives me the reminder.

  Can you please help.

  On the side of Java, this can be done by implementing a FileSystemListener and the rootChanged method:

  public void rootChanged(final int state, String rootName) {
      if (rootName.equalsIgnoreCase("sdcard/")) {
          if (state == FileSystemListener.ROOT_ADDED) {
              /* SD Card is available. */
          } else if (state == FileSystemListener.ROOT_REMOVED) {
              /* SD Card is not available. */
          }
      }
  }
  

  I was not able to find a corresponding WebWorks API or API community well, so I think you need to create your own custom extension to implement this feature of the listener.
  https://developer.BlackBerry.com/HTML5/documentation/using_javascript_extensions_1866976_11.html

• j611 3050 a convert print USB mode

  I have a J611 3050 a printer with a windows 7laptop - how to convert usb mode from mode current wireless that I moved to a wifi not environment? The options do not seem to be available. Can I do a factory reset and reinstall the printer? If so how to do that?

  I do not remember the error message (something like the connection failed!) and I am now away from the printer. It was for my son in College, and I think I'll now use HP on my WIFI and give my son the Canon MP160 to use on USB in college. Maybe one day I'll have another game - but life is too short. Thanks for your help anyway.

• HP 230W docking station USB 3 port works in usb mode 2

  Hello

  I have a HP 8770W laptop and I bought a docking station HP 230 on amazon (this docking station: http://h30094.www3.hp.com/product.aspx?sku=10432928&pagemode=ca)

  also this page mentions that are all 4 ports usb, usb docking station 3

  but when I insert a usb device in them that works on usb mode 2

  computer laptop usb 3 ports works well by themselves, but host usb ports 3 station always operate in mode usb 2...

  and also there's no guarantee

  so is it possible to fix or at least try to solve this problem?

  Thank you

  Hello Ali_AlipourR

  Thanks for posting on the HP Forums!

  I understand that you have a problem with your laptop. However, since it is a commercial laptop, you should post your question on the map cell of the HP Enterprise Forums for a better answer.

  Have a wonderful day!

  Mario

• How can I change transfer modes? I can't find the option.

  I tried to learn a little bit more advanced After effects and had to change the mode of transfer (several times). I know there is a way to activate the modes of transfer in the user interface, but can not quite figure out how.

  Thank you!

  Owen

  Down the bottom left of your layer stack, there is a button 'toggle switches/modes.

• Put the pre in usb mode

  When I connect my Pre to your computer, it will appear as a removable drive. When I try to add a file, I get the message "Insert a disc into drive N."

  How can I put the Pre in USB mode?

  When you connect your phone to usb, the phone should be three choices 'Media Sync' "Usb Mode" "Dependants" choose usb to manually add files.

• Why is the bottom of the artboard changing under mode of RGB CMYK color not?

  Why is the bottom of the artboard changing under mode of RGB CMYK color not?

  Also in Photoshop CC2015.1 the export dialog box as does not work. Why?

  Hi Moly,

  1. Fist create an RGB document
  2. then change it to the artboard of layers.
  3. Now click on the image - mode - CMYK
  4. When a pop up appears, click on merge.

  And now you should be able to change the color of the background

  Concerning

  Rohit

• vCenter - Change Disk Mode depending on

  Hello

  We have a virtualized server vCenter Server on a site and there 'Independent - persistent' drives together.

  I would like to change this to load, so that we can snapshot the virtual machine.

  Usually, I would stop the virtual machine, cannot host via Desktop Client and change the mode however the VM version is 10 so I'm unable to do this.

  And because it's the vCenter server, when it is off, I can't access vCenter.

  Does anyone know how to change the disk mode using another method?

  Thank you.

  Install the latest vSphere Client (v5.5 Update 2). This should allow you to change the settings. To install the new vSphere Clinet, you must first uninstall the current customer of v5.5.

  André