Change wallpaper in Cisco Touch 8

Similar Questions

• I can't change wallpaper in Windows 7 Starter

  Original title: wallpaper

  My Acer laptop has windows 7 starter edition. A few days ago, I met a problem of the missing desktop wallpaper and become black. I tried to solve this back, but I can't. I can't change wallpaper?

  Here are a few references...

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/unable-to-change-Windows-7-Starter-wallpaper/cf67c2ad-FD07-465A-9173-5f6771c334b6

  The above discussion has a lot of messages, but READ THEM ALL before attempting to change your wallpaper... those who have tried to change the paper painted made them unusable PC... Be careful.

  http://www.TechSpot.com/guides/264-change-wallpaper-on-Windows-7-Starter/

  http://www.Instructables.com/ID/Windows-7-Starter-easy-way-to-change-wallpaper/

  You can also try searching for additional references.

  Microsoft has not provided a way to change the wallpaper, but the references above each show a way to do it. I have not validated/tried the methods described in the links above.

  Don't forget to back up all critical files (and make a restore point) before making changes to your system.

• Cannot configure the static IP address for Cisco Touch 8 "

  Hi all

  I found that I can not configure the static IP address for Cisco Touch on TC7.0.1 / 7.0.2 with the procedure described below.

  1. upgrade a codec (e.g. SX20 TC6.3 or less) and a touch paired with the codec for TC7.0.2.

  2. after the upgrade, désapparier (with the help of désapparier Touch button) touch and it reboot.

  3. tap on "IP settings."

  4. Select "Manual IP allocation".

  5. Enter the IP address, subnet mask, default gateway, and then press "Save".

  Even though we have configured the static IP address with the above procedure, IP allocation remains 'Auto' (= DHCP) and the IP address, subnet mask, default gateway is also empty.

  In this situation, the only way to configure the IP address for the Touch is to use the DHCP server.

  I guess many users uses the static IP assignment like us, so please fix it as soon as POSSIBLE.

  Best regards

  Kotaro Hashimoto

  Hi Kotaro,

  It is a known problem in TC7.0.1 and TC7.0.2. The id of the bug is CSCum82147.

  To work around the problem, set IP address you want the button before moving on to TC7.0.x.

  The bug has been fixed and will be included in the next version of the TC software.

  Kind regards

  Jonas Tysso

• Hi, when I change my wallpaper or display the taskbar then restarted windows 7 (asus laptop) taskbar autohide, and change wallpaper unwelcom why I don't

  Hi, when I change my wallpaper or display the taskbar then restarted windows 7 (asus laptop) taskbar autohide, and change wallpaper unwelcom why I don't

  Hello

  This who exactly are you referring to when you say "change unwelcom why I do?"

  If the taskbar is hidden, point to where you saw last it show again. If you don't remember where you saw it, try pointing to the bottom of the screen first, then to the sides or top of the desktop, if necessary. You may need to move the pointer almost off the desktop computer to show the taskbar.

  Show or hide the taskbar

  You can check the status of the question in a new user account:

  Step 1: Create a new user account.

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Step 2: If the problem does not persist in the new user account, then you can try to copy the files from the existing to the new user account profile.

  Difficulty of a damaged user profile

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Please after return of the State of the question.

• C50-B-13D - Win 8.1 satellite can't change wallpaper

  Hi people,

  I'm new to this forum, please bear with me.

  I bought a new laptop of Toshiba Satellite C50-B-13D yesterday with Windows installed 8.1 and I can't change the screen to a black and white of a picture of my choice... I tried everything and even watched videos on Youtube to see if there is a cure for it.

  When I look at the Panel of the thumbnail shown in the photo, I chose, but real desktop (not the smart display bit) is always black. All my icons work fine, but the background won't change.

  If anyone can help me with this issue, I would be really grateful?

  Thank you all: O)

  You ask how to change the background of Windows?
  It's not very delicate.
  Microsoft has published a helpful article about customizing the Windows System.

  Please check this article:
  http://Windows.Microsoft.com/en-us/Windows-8/personalize-PC-Tutorial

  Note: there is a difference between the wallpaper and the lock screen.
  The lock screen is the screen that you see when you lock your PC (or when it crashes automatically after you have not used for some time).

• Portege R830: changing wallpaper

  I want to have a background screen or different wallpaper of the Toshiba one.
  I cannot put through windows. I use a Portege R830 and Windows 7.

  MIA.

  The Office can be customized.

  Make a right click on desktop-> customize

  Now, you can check all the available themes, which also contains background pictures.

  Save the changes.

• No changing wallpaper

  Using Windows 7, I am unable to change my wallpaer. The area where the change should be entered is inactive. Other AIDS sites try me browse HKEY_Local etc, but I do not see the final element - Active Desktop. Any suggestions?

  Sterling Hello,

  Thanks for posting the request in the Microsoft Community.

  This problem can occur for the following reasons:

  • There is a third party application like installed Samsung display manager.
  • In Control Panel, the wallpaper in the Power Options setting is disabled.
  • In the control, remove the background images is selected.
  • A domain policy can prevent the background to change.
  • You may have a corrupt file TranscodedWallpaper.jpg.
  • You use Windows 7 Starter Edition. Windows 7 Starter Edition does not support changing the screen background image.

  To resolve this problem, I would ask you to try the troubleshooting steps provided in the below provided Microsoft Support article.

  Impossible to change the background image in Windows 7

  Hope the helps of information provided. Let us know in case you need more help.

• Time changes of WLC cisco by default whenever the controller restarts

  I have cisco wlc 2500 series and 1700 AP I configured the controller, but to my surprise, whenever it restarts, the time is adjusted to the time default 2000 AD.

  1. do I need to change the NTP server? We do not have the NTP server, so in this case what IP should I use?

  2. is there a way to fix this? I had configured other 2 controllers as well but it I do not encounter this kind of problem, so did I missed something?

  Help, please.

  1. do I need to change the NTP server?

  A NTP is strongly recommended.

  We do not have the NTP server, so in this case what IP should I use?

  Configures the Basic (core router or switch) device to go to the internet for NTP synchronization.  Then configure the WLC to synchronize to the core router or switch.

• Can you change wallpaper on windows 7 starter edition?

  I can't change my wallpaper on my acer inspire one. what I can? Is there a way... its really weird that you can't.

  No, you can't.  It's one of the reasons that Windows 7 Starter is free on these devices.

• The cisco touch 10 Soundbar does not work

  Hello

  The devices are registered on CUCM 10.5.

  We use a SX20 with Touch10, it works fine except the Touch10 Soundbar, it cannot work.

  What could be the problem?

  Thank you for your support

  Homayoun

  What do you mean by soundbar? Is the volume control button Unit 10 touch?

  Have you tried factory reset of the device touch 10?

  Check out the video link below and you will guide you how to the factory to reset the device:

  https://www.YouTube.com/watch?v=bTGuxht_7Ww

  If factory reset does not resolve the issue, contact Cisco TAC if your contract of service for this device. They would replace the hardware problem if discovered unit.

  Kind regards

  Acevirgil

• Management of the display is disabled and unable to change wallpaper

  original title: my management of the display is disable the wallpaper changes to the all.what doesnot n must I do now?

  even when I apply a theme his modifications produce auf all papers n screensaver... What is its solution

  Hi naumanaslam,

  Try to run Desktop Windows Manager Session Manager in Services. See the steps below:

  1. Click Start
  2. Right click on computer
  3. Select Manage
  4. Select Services and Applications
  5. Select Services
  6. Right-click on the Desktop Window Manager Session Manager
  7. Select Properties
  8. Use the drop-down list of Startup type to Automatic
  9. Select apply
  10. Click OK

  If it is a recent issue, you can use System Restore to restore your computer to a point before the show. Also, check out the site of the manufacturer to ensure that you have the most recent video/graphics/display card driver installed.

• How to change the permission to touch the key settings for all users?

  Original title: Howsto permission change to change the touchpad settings

  Members of the Forum,

  My windows7 OS is implemented for several different users.  The touchpad is very sensitive, it is difficult to work with EXCEL or WORD.  Whenever possible, I use a USB keyboard and mouse, but it's not always convenient.  I would like to change the permissions on the mouse settings to allow all users to disable or customize the touch pad settings.  How did you do that.  Any assistance is much appreciated.

  Lemorse

  Mahesh,

  Thank you for your response.  First of all to answer your questions.  I do not work in a domain environment, my computer is custom built, and I am the administrator.  I changed the touchpad settings in the past, but it I need to make on behalf of users administrator when I want to change. As it's boring, I wanted a more convenient way to change the settings. (It was much easier with XP and previous editions of Windows because they would ask permission to make the change and if you have the administrator password, you can change the settings).  I usually work as a user limited to guard against unauthorized or accidental system changes.  After posting my question, I kept sleeping with her and found that if I changed the permissions of pilot pad touch and shared with me as a limited user, I was able to customize I like it as a limited user.  By placing the shortcut to the driver on the desktop that I am able to disable the touchpad at will whenever I work on WORD or EXCEL.  Therefore, I solved the problem.  Once again thank you for taking your valuable time to answer my post.

  Lemorse

• Cannot change wallpaper after you disable Windows Search.

  I had to disable windows search on my tablet. It was consumed all the resources.
  Original title:

  Unscrewed libraries with Windows Search

  But now my libraries get affected.
  When I try to change the desktop background, for example, if I select the picture library, it does not load, is just going to solid colors.

  The pictures in the folder is still there, but it is not updated...

  Is there a solution?
  Only for wallpaper problem would be necessary.
  No 3rd party.

  Hello

  You can read the following article:

  What happens if I disable Windows Search?

  http://Windows.Microsoft.com/en-us/Windows7/what-happens-if-i-turn-off-Windows-search

• How can I configure my constsntly change wallpaper once I taped?

  I set the desktop background to the 'United States', all of them have been marked, I've 'saved', so I thought!

  He worked for a while - but it changed to another image that T has not been chosen.

  How to save the chosen background?

  How the theme to get involved here?

  Video: Change your desktop background (wallpaper)

  • How-to: change your desktop background (wallpaper)

• Change once Lumetri and touch all the clips.

  I've done a bit far in the editing process and now I need shade of color (big mistake, I know that, don't remind me).  However, I'm just curious (and it would be useful for future reference, regardless of the preliminary planning), , but is it possible to change the Lumetri to a clip on a Premiere Pro timeline (imported in SpeedGrade) and have that change automatically ripple through all the other clips with this same effect of applied Lumetri?  It would be useful if I wouldn't apply for re - apply the new Lumetri effect to thousands of other components of the package individually if I change one aspect of quality (for example, a contrast of shadow).  Is there a way to do this easily within SpeedGrade?

  I use CC 2014, by the way.

  The best way to do... like you do a link Direct from PrPro? ... is to put a layer of control over the area of the timeline that you want to change in PrPro, then when D - L on SG, rank this adjustment layer. Or if say you have a clip of 'master', a long, you have cut & used pieces, you can use the Master Clip effect and all ranks, long you do the first instance of which your sequence will be automatically passed to all other cuts that longer clip.

  Past typical practice was to change to lock in "final" edition, and then send colorist of ranking, then Fx, then return to the editor for the final touch. In fact, with the model CC they set up so that one can rank at any time if you have your own editing & ranking.

  Neil