Changed the size of the Windows Boot Camp Partition - now merger does not
My Windows partition was too large, so I used the scroll bar in Boot Camp to reduce its size. Start directly on Windows (via system preferences) works very well. However, I got an error message (I should have written it, but it didn't) when you try to start Windows using the merger. I uninstalled and reinstalled the merger, but now when I start it up I got a message "no boot device found". I would still be able to use the merger through the Boot Camp partition. My thought is that the easiest way would be to completely remove Fusion, because the Boot Camp partition works fine on its own. Apparently, the rest backout package still some files on the hard drive that caused the errors after reinstall.
Any ideas on how to remove all traces of Fusion I can do a completely new reinstall?
VMware Fusion of uninstalling/reinstalling will not solve this problem, and all you have to do is delete the partition Boot Camp package of Virtual Machine that is basically just meta-data and does not affect the physical Boot Camp partition by deleting.
Note: These senses are different which have already been posted so read and follow through... Note: These steps assume that you have a single Apple to default installation of Windows on a single Boot Camp partition and Boot Camp of VMware Fusion single default partition Machine virtual (without a snapshot *) and if you have changed the partition Boot Camp Virtual Machine to add additional hard disks to be virtual or RAW disk then do not use these instructions unless you backup the Boot Camp partition the Machine package virtual first. * Also note that Fusion 2.0.0 may accidentally have a snapshot with the virtual partition Boot Camp Machine and it should not have, then you should check to ensure that the condition does not exist as well. (With merger closed if the partition Boot Camp Virtual Machine package is over 1 MB in size, then you might have a snapshot in place and do not continue with these instructions.)
===
1. If the merger is open, close it.
2. in a Terminal (/ Applications/Utilities/Terminal) copy and paste command, as the following and then press Enter and it will delete the partition Boot Camp Virtual Machine of the metadata and the Virtual Machine to help.
Note: This does not affect the Boot Camp partition install windows in that it does not remove it. Also be sure you copy all the command line below, as well as, "RM" at the beginning of the ' (quote) after the s in the Machines. "
RM - dfr "/Users/$ the specified item was not found./Library/Application Support/VMware Fusion/Virtual Machines/Helper/naos-1.0.vmwarevm/vmware.log ' ~/Desktop/Helper_vmware.log
Tags: VMware
Similar Questions
-
I had a windows 2008 r2 domain 1 DC everything worked fine, I added a second windows of DC 2012 now Kerberos does not work for the RDP, Hyper V replication is nothing below a couple of samples of what I see I do not know where to begin finding the problem
+ System
-Supplier
[Name] Microsoft-Windows-Security-Kerberos
[Guid] {98E6CFCB-EE0A-41E0-A57B-622D4E1B30B1}
[EventSourceName] Kerberos
-EventID 3[Qualification] 32768
Version 0
Level 2
Task 0
Opcode 0
Keywords 0 x 80000000000000
-TimeCreated[SystemTime] 2016-01 - 03 T 01: 34:27.000000000Z
2991 EventRecordID
Correlation
-Execution[ProcessID] 0
[ThreadID] 0
Channel system
Computer DC02.xxxxxxonline.com
Security-EventData
LogonSession xxxxxxONLINE.COM\xxxxxx
ClientTime
1:34:27.0000 03/01/2016 Z ServerTime
Error code 0 x 19
ErrorMessage KDC_ERR_PREAUTH_REQUIRED
ExtendedError
ClientRealm
CustomerName
ServerRealm xxxxxxONLINE.COM
ServerName krbtgt/xxxxxxONLINE.COM
TargetName krbtgt / * address email is removed from the privacy *
ErrorText
E file
Line d3f
30773054A103020113A24D044B3049301FA003020112A1181B16524F434B45594F4E4C494E452E434F4D726F636B65793005A003020117301FA003020103A1181B16524F434B45594F4E4C494E452E434F4D726F636B65793009A103020102A20204003009A103020110A20204003009A10302010FA2020400--------------------------------------------------------------------------------
Binary data:
In the words
0000: 54307730 010203A 1 044DA213 3049304B
0008: 0203A01F 18A 11201 4F52161B 59454B 43
0010: 494C4E4F 432E454E 6F724D4F 79656B 63
0018: 03A 00530 30170102 0203A01F 18A 10301
0020: 4F52161B 59454B 43 494C4E4F 432E454E
0028: 6F724D4F 79656B 63 03 HAS 10930 A2020102
0030: 30000402 0203 HAS 109 02A 21001 09300004
0038: 010203 A 1 0402A20F 00In bytes
0000: 30 77 30 54 A1 03 02 01 0w0T¡...
0008: 13 4 04 4 B 30 49 30 A2. ¢ M.K0I0
0010: A0 03 02 01 12 A1 18 1F. ....¡.
0018: 1 16 52 4F 43 4 B 45 59 B... XXXXXX
0020: 4F 4 49 4F 4E 45 2ND 43 ONLINE. C
0028: 4 72 6F 63 6 b 65 79 OMxxxxxx 4F
0030:30 05 A0 03 02 01 17 30 0. .... 0
0038: A0 03 02 01 03 A1 18 1F. ....¡.
0040: 1 16 52 4F 43 4 B 45 59 B... XXXXXX
0048: 4F 4 49 4F 4E 45 2ND 43 ONLINE. C
0050: 4 72 6F 63 6 b 65 79 OMxxxxxx 4F
0058:30 09 03 02 01 02 A2 A1 0... ¡¢
0060: 02 04 09 03 02 A1 00 30... 0.¡..
0068:01 A2 02 04 00 30 09 10... ¢... 0.
0070: A1 03 02 01 0F A2 02 04... ¢...
0078: 00 .+ System
-Supplier
[Name] Microsoft-Windows-Security-Kerberos
[Guid] {98E6CFCB-EE0A-41E0-A57B-622D4E1B30B1}
[EventSourceName] Kerberos
-EventID 3[Qualification] 32768
Version 0
Level 2
Task 0
Opcode 0
Keywords 0 x 80000000000000
-TimeCreated[SystemTime] 2016-01 - 02 T 16: 52:38.000000000Z
2943 EventRecordID
Correlation
-Execution[ProcessID] 0
[ThreadID] 0
Channel system
Computer DC02.xxxxxxonline.com
Security-EventData
LogonSession xxxxxxONLINE.COM\xxxxxx
ClientTime
16:52:38.0000 02/01/2016 Z ServerTime
Error code 0 x 19
ErrorMessage KDC_ERR_PREAUTH_REQUIRED
ExtendedError
ClientRealm
CustomerName
ServerRealm xxxxxxONLINE.COM
ServerName krbtgt/xxxxxxONLINE.COM
TargetName krbtgt / * address email is removed from the privacy *
ErrorText
E file
Line d3f
30773054A103020113A24D044B3049301FA003020112A1181B16524F434B45594F4E4C494E452E434F4D726F636B65793005A003020117301FA003020103A1181B16524F434B45594F4E4C494E452E434F4D726F636B65793009A103020102A20204003009A103020110A20204003009A10302010FA2020400--------------------------------------------------------------------------------
Binary data:
In the words
0000: 54307730 010203A 1 044DA213 3049304B
0008: 0203A01F 18A 11201 4F52161B 59454B 43
0010: 494C4E4F 432E454E 6F724D4F 79656B 63
0018: 03A 00530 30170102 0203A01F 18A 10301
0020: 4F52161B 59454B 43 494C4E4F 432E454E
0028: 6F724D4F 79656B 63 03 HAS 10930 A2020102
0030: 30000402 0203 HAS 109 02A 21001 09300004
0038: 010203 A 1 0402A20F 00In bytes
0000: 30 77 30 54 A1 03 02 01 0w0T¡...
0008: 13 4 04 4 B 30 49 30 A2. ¢ M.K0I0
0010: A0 03 02 01 12 A1 18 1F. ....¡.
0018: 1 16 52 4F 43 4 B 45 59 B... XXXXXX
0020: 4F 4 49 4F 4E 45 2ND 43 ONLINE. C
0028: 4 72 6F 63 6 b 65 79 OMxxxxxx 4F
0030:30 05 A0 03 02 01 17 30 0. .... 0
0038: A0 03 02 01 03 A1 18 1F. ....¡.
0040: 1 16 52 4F 43 4 B 45 59 B... XXXXXX
0048: 4F 4 49 4F 4E 45 2ND 43 ONLINE. C
0050: 4 72 6F 63 6 b 65 79 OMxxxxxx 4F
0058:30 09 03 02 01 02 A2 A1 0... ¡¢
0060: 02 04 09 03 02 A1 00 30... 0.¡..
0068:01 A2 02 04 00 30 09 10... ¢... 0.
0070: A1 03 02 01 0F A2 02 04... ¢...
0078: 00 .This issue is beyond the scope of this site which is for the consumer to related issues.
To ensure that you get a proper answer, ask either on the Technet site, if it is a type of Pro problem, or MSDN if it's related to the developer
http://social.technet.Microsoft.com/forums/en-us/homes/en-us/home
http://social.msdn.Microsoft.com/Forum
-
Unable to access the Vista Boot Camp partition.
I've got Snow Leopard 10.6.2 on an iMac Intel Core 2 Duo 3.06 GHz with 4 GB of ram. My version of Fusion is 2.0.6. Vista Home Premium (32-bit, of course) is upgraded to SP2. All I am able to do is a blue screen of death when I try to access my Boot Camp by merge partition. This senario has never worked for me. I just use Fusion to access another copy of Windows that I designated merger. The exact code is available on the attached screenshot. I am able to access my Boot Camp partition without problems on a restart. I looked for a specific answer to my problem with no luck. The only thing I've tried so far is increase the default 512 MB available ram (I think) to about 2 GB. Please help me to solve my problem.
Thank you
Sean
This gives a test:
-
I've just updated my LR to the latest version. Now, it does not read my files. I tried different cards on different devices, and none of them can be read by LR! Help!
It turns out I had to right-click on the LR icon and then select "Run as Administrator". That solved the issue!
-
How to change the windows boot screen image 8 other than the default values
How can I change the screen image of departure other than those supplied by microsoft.
I want to change the image of metro/Start screen because I do not have the funds provided by microsoft.Help!I know that your frustrations! I have the same preference, it is currently not possible - but there is an update on its way (you can search for information on - it is called 8.1 Windows or blue Windows) which allows you to put photos or whatever behind the Windows 8 UI splash screen. Update should be soon maybe some time this summer - August.
-
Repair after you create the new Boot Camp partition
Hi, I know there have been many discussions on this topic, so apologies for the same question, but I hope someone will help me with my problem-specific instructions.
My configuration:
MacBook Pro, end of 2014
10.11.2 OS
Partition Bootcamp running Windows 10
Situation
- reduction in the size of the Mac partition in disk utility
- created new partition in the space not allocated, then removed, with only the Mac and Bootcamp partitions
- However 'option' button doesn't show Bootcamp at startup, only Mac
- Bootcamp is visible in disk utility and mounted and accessible in the Finder
diskutil list
/ dev/disk0 (internal, physical):
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * GB 500,3 disk0
1: disk0s1 EFI EFI 209.7 MB
2: Apple_CoreStorage Macintosh HD 435,4 GB disk0s2
3: disk0s3 Apple_Boot Recovery 650,1 MB HD
4: Microsoft database BOOTCAMP 64.0 GB disk0s4
/ dev/disk1 (internal, virtual):
#: NAME SIZE TYPE IDENTIFIER
0: Apple_HFS Macintosh HD GB + 435,1 disk1
Logical volume on disk0s2
E060DCB6-14B6-4F2C-91B9-0134D9D0B3FC
Unlocked encrypted
/ dev/disk2 (external, physical):
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * GB 64.0 disk2
1: disk2s1 EFI EFI 209.7 MB
2: Apple_HFS WININSTALL 63.7 GB disk2s2
sudo fdisk/dev/disk0
Disk: geometry / dev/disk0: 60821/255/63 [977105060 sectors]
Signature: 0xAA55
From end
#: cyl hd s - cyl hd s id [Start - size]
------------------------------------------------------------------------
1: EA 1023 254 63 - 1023 254 63 [1-409639]
2: AC 1023 254 63 - 1023 254 63 [409640-850425816]
3: AB 1023 254 63 - 1023 254 63 Boot Darwin [850835456-1269760]
4: 0C 1023 254 63 - 1023 254 63 FAT32L Win95 [852105216-124999680]
sudo gdisk/dev/disk0
GPT fdisk (gdisk) version 1.0.1
WARNING: Open with shared lock devices will not have their
table partition automatically reloaded!
NOTE: Pass the test failed with the error number 1. It will be impossible to save
changes to the table to partition on this drive!
You may have to disable the Protection of the integrity of the system to use this program. See
https://www.Quora.com/How-do-I-turn-off-the-rootless-in-OS-X-El-Capitan-10-11
For more information.
Scanning partition table:
MBR: hybrid
BSD: absent
APM: absent
TPG: present
Found a valid GPT with hybrid MBR; using GPT.
Command (? for help): p
Disk/dev/disk0: 977105060 sectors, GiB 465.9
Logical sector size: 512 bytes
Identifier (GUID) of disc: 09E0BC34-38AB-4D4D-9739-8054E7CD02D6
Partition table contains up to 128 entries
First usable sector is 34, last usable area is 977105026
The partitions will be aligned with the boundaries of sector 8
Space free total is 137 sectors (68.5 KiB)
Starting number (sector) end (sector), Code name of size
409639 40 1 200.0 of MiB EF00 EFI system partition
2 409640 850835455 405,5 giB AF05 customer
3 850835456 852105215 620,0 MiB AB00 Recovery HD
4 852105216 977104895 59.6 giB 0700 BOOTCAMP
Thank you!
Please after the release of
sudo dd if = / dev/rdisk0s4 account = 1 2 >/dev/null | hexdump - C
-
After the restoration, I did the update of windows, but all failed, I can't open internet explore (only in safe mode) I don't have the installation for windows vista disc, but the only three recovery disc the store gave me when I bought the laptop (an ACER aspire 6920g)
Hello
1. What is the exact error message you received?
2. How did you know there is corrupted in windows files?
3. what exactly happen when you try to make SFC?
4. what exactly happen when you try to restore, you received an error message?
I suggest you perform the clean boot with safe mode.
How to troubleshoot a problem by performing a clean boot in Windows Vista.
-
The Windows 7 user account control settings does not open
Hello
Someone knows a problem where a computer launches the application "change user account control settings? We are dev work on multiple PCs and need to disable this feature. Normally, I would run the UAC and just drag the bar down, but I can't even the application to load. I even tried running: C:\Windows\System32\userAccountControlSetings.exe and it does nothing.
Thank you
SeanWell, I was not able to understand why the window UAC doesn't appear, however, I managed to disable UAC via the local policy settings. For reference purposes:
- Start > run > gpedit.msc
- Computer configuration > Windows settings > security settings > local policies > Security Options
- Then define:
- User account control: behavior of the guest of elevation for administrators in Admin Approval Mode – set its value toElevate without asking for confirmation.
- User account control: detect application installations and prompt for elevation - set its value todisabled.
- User account control: only elevate the UIAccess applications that are installed in secure locations - set its value todisabled.
- User Account Control: Run all administrators in Admin Approval Mode - set its value todisabled.
Sean
-
How can I change the settings of heap memory when CF does not start?
I am rewriting a web application that someone else has done a very bad job on, including database design.
While reviewing the existing database, I came across a "OutOfMemoryError: Java heap space" error, I went to the CF Admin and hit the setting between 512 to 2048 (CF8 Developer Edition).
Now I can't get CF at startup, and as such I can't get in the CF Admin to change the setting back. Is it possible to fix this without reinstalling CF?
It's a little version and edition of charge, so just open a CMD window CD at the base of your installation (for example, C:\ColdFusion9) and dir a ShadoMX/util/Flex/SDK/bin/jvm.config DIR/S to search for the config file. Then just open it in Notepad, etc. and set the parameter memory.
-reed
-
Hey guys, so I bought this Mac Mini back in September and installed Windows 10 through an iso image on the subject. The problem occurred when everything started trolling. As I speak everything crashing... Same Finder. Then I reinstalled everything lost a part of my data because it does not transfer to the Back Up Hard Drive is correctly. Anyway, now I'm on El Capitan, and I can not install Windows 10 ISO images. He is constantly asking me to have a USB key where previously it was not.
Everyone knows these issues? I don't really have a USB key, a gigantic 5 TB hard.
1. in which year is the Mini?
2 yosemite and El Capitan differ by the BCA UI.
3 was W10 on-site as an upgrade of an existing W7 / W8 + installation using the ISO? Are now trying a clean install?
4. your Mac can use either an external optical drive or a USB key (or both) to install the W10.
-
I bought a data transfer cable and I tried to make a transfer of data from the laptop with non - English Windows XP Profesional a laptop with Windows 7 Home via WINDOWS EASY TRANSFER viz English.
http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-easy-transfer
but I was surprised that I got a message "that a different language to the windows version has been so that data transfer can not live there. And above all, there was a message "that the data cable has not been detected."
Microsoft is working with so many language versions, then why this simple problem is not solve upward? It cannot be too big problem to compensate for a versatile application that would work on all versions of Windows.No, it doesn't work of course between the various language versions, has never and will never be. Will not be fixed either, because Windows XP is in the extended now support (only security patches issued) and becomes entirely non supported in about a year. Save and move documents using a different method.
-
I bought Photoshop Elements in March 2014. Yesterday, I had to reinstall the Mavericks (Apple).
Now the elements no longer opens. Do I need to download the trial version again or how
I have it to get back to work?
You can check your Adobe account online to see if there is a link available for download of the application. If it isn't there, you can download the trisl on the following link...
http://www.Adobe.com/cfusion/TDRC/index.cfm?product=photoshop_elements
for older versions:
PES 10: 11 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
PSE 7, 8, 9 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-7-8-9-downloads.html
-
Windows 7 update msxml now wirerless does not work
install router wireless n again portable sony with windows 7. Windows msxml update and now the wirerless does not work
Hi Mary1965,
Welcome to the Microsoft answers site.
· What is the error message or the error code that you get when you try to access the wireless internet?
I suggest that you run a troubleshooting utility that might help you to connect wireless online.
1. click on start.
2. troubleshooting in the start search type.
3. click on network and Internet in the Troubleshooting window.
4. click on the NIC to resolve problems with the wireless connection.
Check now if you are able to communicate online wireless or not.
If the problem persists, I suggest you uninstall this particular update which was responsible for programs and features and check.
Now start the Windows updates once more and check.
You can try to install the stand-alone package to update manually and check.
Swathi B - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
IE9 changes the windows mail preview pane header police and not show attachments
This question was apparently answered by uninstalling ie9, but the time is coming where ie9 will be installed by windows update. I have a laptop running Vista Edition family Basic, and a desktop running vista Home premium and both have the same problem since ie9 installed. The preview pane header seems to have had its fonts changed or altered to the leaner and the trombone for attachments disappeared completely. Remove ie9 is not a solution.
WYSIWYG. IE9 is not compatible with Windows Mail. When the update is provided by WU/MU, hide it.
-
My HP c309a recently started giving me starting problems. We moved and I had to set up my office at home again. I thought that all I had to do was just plug everything back into the wall and use it, but now whenever I turn on the printer, I get a message on his window please wait while it starts, but nothing happens after that. I can leave it on for hours at a time to start completely, but it won't work. My control panel shows the printer installed and that it appears on my wireless network, but if I try to print something it says the printer is offline. The printer just freezes at startup and it reset by disconnecting the power source does nothing. I even tried to delete and reinstall it with the usb cable but that did not work or the other. Can someone help me?
OK, let's reset the printer: turn the power off, press and hold # and 6 keys on the printer all in a little after I turn it back on.
Maybe you are looking for
-
iPad Pro not really Pro without a keyboard, trackpad
I want to know if other users Apple faithful feel the same way I do. I think that Apple should develop a trackpad for iPad Pro keyboard. I can see how this would potentially cannibalize macbook sales, but the reality is that, when the dust settles on
-
I am part of a family sharing account as my wife configuration. She chose the payment method is not valid, but I have another method of payment which is valid, but when I try to make a purchase, I thought that the paymemt on the part of the family is
-
Build specifications - option REMAINS unavailable
I'm unable to create a RESTful web service because the option is not available in my version of LabVIEW. I followed this tutorial: http://zone.ni.com/reference/en-XX/help/371361G-01/lvhowto/build_web_service/ (see step 6 of creating a Web Service pr
-
RED CROSS IN THE AREA OF THE IMAGE
Hello, on some of my boxes of the image, I have a red cross only. Can you tell me what im missing?
-
DETECT if bluetooth is running GOLD Detection phone
Scenario: I have an application that needs bluetooth to connect to a bluetooth serial port device. App has always runs and starts at startup The app is eliminated through BES with ALL permissions on the phone. Bluetooth on phones is set to "enabled"