Repair after you create the new Boot Camp partition

Similar Questions

• Repair your startup disk Bootcamp disappearing after you create the new partition

  . After some research, I found that it was the way forward to create a separate partition, and so I did another partition.

  I didn't know it would affect my Windows partition that I thought it was completely different.

  So now, when I start it up, there is no option to start with Windows. But when I boot the Mac and select Startup disk, it displays Boot Camp is still there, and all my files etc. are still there.

  I tried to create one separate partition (other than Bootcamp). After that its done and I started my computer, I found that the option to boot Windows (Bootcamp startup disk) has disappeared. But I still see boot camp Mac files. Any solution for this? Thank you.

  (I tried to find this solution on the discussion Forum, and I found: repair Boot Camp after having created the new partition, however, I'm not able to follow these instructions. any help would be appreciated)

  For reference:

  Aerospews-MBP: ~ the marcuslo list $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh HD 350,7 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Apple_HFS 47.6 Untitled GB disk0s4

  5: Microsoft database BOOTCAMP 101,0 GB disk0s5

  Aerospews-MBP: ~ list of cs marcuslo$ diskutil

  No logical volume group CoreStorage found

  Aerospews-MBP: ~ marcuslo$ sudo TPG - vv - r show/dev/disk0

  See the TPG: / dev/disk0: mediasize = 500277790720; SectorSize = 512; blocks = 977105060

  See the TPG: / dev/disk0: PMBR to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 977105059

  start index size summary

  0 1 PMBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 684969040 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  685378680 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  686648216 92929128 4 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  779577344 262144

  779839488 197265408 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  977104896 131

  977105027 32 table dry GPT

  977105059 1 dry GPT header

• Issue after you create the new partition, Bootcamp expansion

  Hello

  I hope someone can help with a problem I'm having.

  I found an old Apple discussion on how to resize a partition, bootcamp, by reducing the size of the OS X partition, then using a Windows based tool to then extend the Bootcamp partition. Big mistake! I'm done with the same problem as the creator of this thread with my Windows no longer bootable partition.

  I followed the steps described by lonely T, which worked perfectly! Thank you very much!

  Then, I went into Windows and use the Partition Mini tool to extend the Windows partition in the unallocated partition, which worked fine in Windows.

  However when I boot in OS X and open disk utility I see now 3 separate partitions. (1) mac HD. ((2) Untitled (the one I created) 3) Windows HD (Bootcamp). Then OS X is not recognizing that I extended the Windows HD partition in the Untitled one.

  Is there a way to solve this problem without ruining it now expanded Windows partition? Windows does not seem to see two separate partitions, only in OS X I downloaded GPT Fdisk

  Thanks in advance!

  Output below:

  diskutil list

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage Macintosh HD 121.0 GB disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.0 TB disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_CoreStorage Macintosh HD 637,5 GB disk1s2

  3: disk1s3 Apple_Boot Recovery 650,1 MB HD

  4: Apple_HFS 173,7 GB disk1s4

  5: Microsoft Windows HD 188.0 GB disk1s5 data base

  / dev/disk2 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 750.0 GB disk2

  Logical volume on disk0s2, disk1s2

  D3F5913D-0A32-4BE8-BD44-A65885746DA0

  Fusion unencrypted drive

  / dev/disk3 (external, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.5 to disk3

  1: EFI EFI 209.7 MB disk3s1

  disk3s2 2: Apple_HFS My Book Studio has 1.5 TB

  / dev/disk4 (external, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.5 to disk4

  1: EFI EFI 209.7 MB disk4s1

  2: Apple_HFS My Book Studio B 1.5 TB disk4s2

  Cs diskutil list

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group 23846179-0CBE-42F5-A375-0D969F4C789E

  =========================================================

  Name: Macintosh HD

  Status: online

  Dimensions: 758507479040 B (758.5 GB)

  Free space: 229376 B (229.4 KB)

  |

  +-< physical="" volume="">

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-< physical="" volume="">

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk1s2

  |   Status: online

  |   Dimensions: 637518626816 B (637.5 GB)

  |

  + -> 41CF6816-F84F-4D76-A6FD-97288E448BF7 family of Logical Volume

  ----------------------------------------------------------

  Encryption type: no

  |

  +-> Logical Volume D3F5913D-0A32-4BE8-BD44-A65885746DA0

  ---------------------------------------------------

  Disc: disk2

  Status: online

  Size (Total): 749999882240 B (750.0 GB)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  sudo TPG - vv - r see the/dev/disk0

  See the TPG: / dev/disk0: mediasize = 121332826112; SectorSize = 512; blocks = 236978176

  See the TPG: / dev/disk0: PMBR to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 236978175

  start index size summary

  0 1 PMBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 236306352 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC

  236715992 262144 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  236978136 7

  236978143 32 table dry GPT

  236978175 1 dry GPT header

  sudo TPG - vv - r see the/dev/disk1

  See the TPG: / dev/disk1: mediasize = 1000204886016; SectorSize = 512; blocks = 1953525168

  See the TPG: / dev/disk1: MBR suspicious to sector 0

  See the TPG: / dev/disk1: Pri GPT to sector 1

  See the TPG: error: wrong card

  See the TPG: could not open device ' / dev/disk1 ': Undefined error: 0

  sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 14751/255/63 [236978176 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-236978175]

  02:00 0 0 0-0 0 0 [0-0] unused

  03:00 0 0 0-0 0 0 [0-0] unused

  04:00 0 0 0-0 0 0 [0-0] unused

  sudo fdisk/dev/disk1

  Disk: geometry / dev/disk1: 121601/255/63 [1953525168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 0 0 2 - 25 127 14 [1-409639]

  2: AF 25 127 15 - 1023 254 63 [409640-1245153568] HFS +.

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [1245563208-1269760]

  * 04:07 1023 254 63-1023 254 63 [1246834688-706689024] HPFS/QNX / TO THE

  Did you install GPT Fdisk as described in Re: can not start windows after resizing partitions ? If so, can you post the output of 'p' command of Gdisk?

• After you create a new playlist in iTunes, every song has the cover of the album and no box on the left side. How can I remove from the work and recover the box? TIA

  After you create a new playlist in iTunes, every song has the cover of the album and no box on the left side. How can I remove from the work and recover the box? TIA

  You can change the appearance of a selection by clicking on "reading list" in the upper right of the iTunes window. The desired view is probably "tracks"

• Satellite P100-429, stopped after you create the partition on the HARD disk

  After you create the partition on the HARD disk. PC just stopped.
  After using the restore CD, nothing happened again, any ideas?

  Hello

  Express media player has been installed on the partition of the laptop?
  I can give you a good solution for 100%, but there may be a conflict between the express media player partition and the new partition.
  Have you installed the OS on the new partition?

  Hey Buddy, try to delete the entire partitions in the HARD drive and format the HARD drive completely. Then try to use it again the Toshiba Recovery CD and install Toshiba image on the HARD drive.

• HP 5510 will be not printed black before and after you installed the new cartridge. the specified controls did.

  Photosmart HP 5510 will be not printed black before and after you installed the new cartridge.  The specified controls did.

  Yes, I was referring to manually clean the print head. I see that the 5510 lacks the possibility of leaving the print head manually.
  
  You can click on the menu of your SETUP program on your screen and go to TOOLS and clean the print head from there.
  
  If this does not resolve your problem, you may need to replace the print head.
  Contact HP Total Care (1800-474-6836), and if your unit is under warranty, its free.
  
  Let me know if this can help, thank you.

• Changed the size of the Windows Boot Camp Partition - now merger does not

  My Windows partition was too large, so I used the scroll bar in Boot Camp to reduce its size.  Start directly on Windows (via system preferences) works very well.  However, I got an error message (I should have written it, but it didn't) when you try to start Windows using the merger.  I uninstalled and reinstalled the merger, but now when I start it up I got a message "no boot device found".  I would still be able to use the merger through the Boot Camp partition.  My thought is that the easiest way would be to completely remove Fusion, because the Boot Camp partition works fine on its own.  Apparently, the rest backout package still some files on the hard drive that caused the errors after reinstall.

  Any ideas on how to remove all traces of Fusion I can do a completely new reinstall?

  VMware Fusion of uninstalling/reinstalling will not solve this problem, and all you have to do is delete the partition Boot Camp package of Virtual Machine that is basically just meta-data and does not affect the physical Boot Camp partition by deleting.

  Note: These senses are different which have already been posted so read and follow through... Note: These steps assume that you have a single Apple to default installation of Windows on a single Boot Camp partition and Boot Camp of VMware Fusion single default partition Machine virtual (without a snapshot *) and if you have changed the partition Boot Camp Virtual Machine to add additional hard disks to be virtual or RAW disk then do not use these instructions unless you backup the Boot Camp partition the Machine package virtual first. * Also note that Fusion 2.0.0 may accidentally have a snapshot with the virtual partition Boot Camp Machine and it should not have, then you should check to ensure that the condition does not exist as well. (With merger closed if the partition Boot Camp Virtual Machine package is over 1 MB in size, then you might have a snapshot in place and do not continue with these instructions.)

  ===

  1. If the merger is open, close it.

  2. in a Terminal (/ Applications/Utilities/Terminal) copy and paste command, as the following and then press Enter and it will delete the partition Boot Camp Virtual Machine of the metadata and the Virtual Machine to help.

  Note: This does not affect the Boot Camp partition install windows in that it does not remove it.  Also be sure you copy all the command line below, as well as, "RM" at the beginning of the ' (quote) after the s in the Machines. "

  RM - dfr "/Users/$ the specified item was not found./Library/Application Support/VMware Fusion/Virtual Machines/Helper/naos-1.0.vmwarevm/vmware.log ' ~/Desktop/Helper_vmware.log

• InDesign CC closes unexpectedly when you create the new document

  Hi, my CC Indesign closes unexpectedly whenever I try to create a new document.

  Also, it closes when I use the plugin Blurb Indesign, to create the new document or for download from my books - during the pre-flight, she leaves.
  

  I've updated to CC2015. I also re-installed the plugin blurb. These two measures do not seem to work.

  • The InDesign file in the cache folder, delete.
  • In the preferences/Adobe InDesign / Version 11.0/en_US (or any language folder you see there), locate the InDesign Defaults file and place it on your desktop (this way you can always copy it back if necessary). If there is a file, InDesign SavedData offers also the office.
  • Restart InDesign after doing that, fingers crossed it will launch.
  • If you are satisfied with the result and don't need your InDesign preferences previous folder (InDesign Defaults), then delete the two files to the desktop computer. I usually keep a copy of them just in case ;-) But 99% of the time that I do not put them back, as clearing caches and prefs seems very often cure the problems.

• CS6 Illiustrator crashes when you create the new file

  Hello.

  I'm using windows 7 x 64. And I installed the two Illiustrators x 64 and x 32. I open the Illiustrator but when I try to create the new file Illiustrator stop working.

  Windows 7 Hompe premium x 64

  processor i3 4x2.93

  RAM: 4 GB

  network with printers

  

  error reaport

  

  Hi Philippe,.

  We are really sorry for all the inconveniences that made you.

  Try the following steps to check the issue.

  1 try resetting preferences

  Press Ctrl-Alt-Shift on PC as soon as you click on the Illustratir icon to reset the preferences to the default settings.

  2. If this help not try to remove all printers from the system one & check.

  3. in addition, you can try to set the boot system & check if still HAVE plant if you try to create a file.

  At the same time if these steps does not resolve your problems you can contact Adobe support by following the link below:

  http://helpx.Adobe.com/contact/

  Thank you

  Florian

• BOOTMGR is missing after you mount the new hard drive

  I have an acer 6930g laptop using windows vista. My laptop crashed and left the hard drive corrupt / unreadable, so I set up a hard drive again.
  When I start it shows message BOOTMGR is missing.on restart alt f10 not work.i have the 2 dvd backup which I was invited to burn when I first bought computer I tried to load these, but the ability to load backup Hi drive light not so can not click on it. This option is the factory restore and it shows error impossible restoration - reason 0xd000000d. Click ok to restart the computer... and then I am back to BOOTMGR missing again.

  Hello

  If you created the backup restore disc complete by using Windows backup and restore, you try to perform the system restore. If you have not created backup disk using restore option, I suggest you to contact the computer manufacturer to restore Windows vista.

  Warning: When you use a Windows complete PC backup image to restore your computer, it is a complete restoration. You cannot choose to restore individual items and all of your current programs, Control Panel, and the files are overwritten. You must regularly back up your files by using the back up files Wizard.

  For your reference, follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

• Unable to access the Vista Boot Camp partition.

  I've got Snow Leopard 10.6.2 on an iMac Intel Core 2 Duo 3.06 GHz with 4 GB of ram.  My version of Fusion is 2.0.6.  Vista Home Premium (32-bit, of course) is upgraded to SP2.  All I am able to do is a blue screen of death when I try to access my Boot Camp by merge partition.  This senario has never worked for me.  I just use Fusion to access another copy of Windows that I designated merger.  The exact code is available on the attached screenshot.  I am able to access my Boot Camp partition without problems on a restart.  I looked for a specific answer to my problem with no luck.  The only thing I've tried so far is increase the default 512 MB available ram (I think) to about 2 GB.  Please help me to solve my problem.

  Thank you

  Sean

  This gives a test:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1007351

• Problem of database after you create a new library and drag it to the desktop. How can I cancel that.

  I created a new library, was asked to analyze media. The original library and the new have been listed. I thought that I had to drag the new desktop to add music. It was a serious mistake. I can't get it back with the other. The two files show 10. GB but we have 5 points and 11 other elements. Most of the music (Christmas) does not appear.

  The original library and the new have been listed. I thought that I had to drag the new desktop to add music. It was a serious mistake. I can't get it back with the other. The two files show 10. GB but we have 5 points and 11 other elements. Most of the music (Christmas) does not appear.

  That's where I did not understand your explanation.  Registered? Registered where?  How is - what drag you a library on the desktop?

• After you add the new toolbar after clicking on the fact, made new TB cases disappear. Has worked w / all the worms. FF so far.

  I got a toolbar additional ((àle total de 3 personnalisé ajouté deles de barres d'outils) that was just too much to place & need 2 remove it.) No option to remove the toolbar named singularly, only option available was 2 toolbar reset, I did & began to build again once I added called "weather", he created & defining the space available, but after I hit 'complete' on customize toolbar, he disappeared. Find that I am unable to create and maintain new toolbars to help customize the toolbar. This is the first I have reset my toolbar and found this problem.

  Have you done something to the new toolbar before you clicked Add? Empty custom toolbars are removed automatically.

• After you download the new version of firefox, I didn't like it and tried to restore my system to an earlier time and version of firefox. Now that firefox does not open, even the old version isn't there more.

  I want to get firefox, keeping all bookmarks.

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

  Uninstall your current version of Firefox.

  • Do not remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data in the profile folder.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup

• LaserJet 1150: Laserjet 1150 problems after you insert the new ink cartridge

  Hi, I am the owner of this very good printer for 10 years now.  Used only a single all these years ink cartridge (I use it only for work related missionery) with not a single problem.  When we bought it we also bought a replacement ink cartridge.  However, when I put in place the new ink cartridge, I have a problem of printing documents.  Each document gives me the same results.  I took it to the store of the local computer, which shook the cartrdige vigorously and I also ran the service option in the HP printer Toolbox. The guy at the computer said I need to print a lot of papers and see what is happening... what I did.  But the result in each impression remains exactly the same. The annex in the printed document.  Can we still do this ink cartridge work after having been stored for 10 years?  Thank you for reading my message.

  You have a bad toner cartridge.  Given that this printer is very old, there is a lot new in the old box of cartridges of toner there stock.  Over time, the wiper blade will hurt comes from there.  Think that buy you a new toner from a big box store which should have new actions and you will come back if the cartridge is bad.