Changes according to the size of the rectangle corner radius...
With CS5 and I draw a rectangle, change the top rounded angle, to the rayon.125. Depending on the size (height) of the rectangle, the RADIUS is different. If the rectangle is. 1875 "the RADIUS is"inferior"to the search boxes that are. 25' or more... How can I fix?
will this work?
Create an image with your corner radius.
Create a frame slightly larger than your desired head block.
Cut the second frame (or copy) to the Clipboard.
Select the first image and object > paste inside.
Select the image smaller, just stuck in (you may need to use the direct Selection tool or object > select > summary occasionally) and move it to your taste.
I went a little over Board with the screenshot example, but all the elements are displayed.
Bonus points, enter this group last image and drag it to your desktop or graphics folder. You can import/place/drag in any document as necessary afterword. (.inds = extract of InDesign)
Tags: InDesign
Similar Questions
-
The menu system default language does not change according to the location that uses in-app
Hello
I have an emergency in application if you can reply me as soon as possible.
In fact, I've implemented localization in application for Os 5.0 for 7.0.But, I extract some problems on specific devices so can you help me out for short.
My problem: -.
I use both languages in my application 1. Netherland and 2. English.
Then 2 type of different scenario produced
1. whenever the user change language of application at this time menu default language (Close, keyboard and Application Switch) no change. These are the ways that they change language according to the language of the camera. But this problem go get some specific device as 9850 for Os 7.0 and 9300 for Os 6.0.
2 even conducted no user in another device like 9300 Os 5.0,8900 Os 5.0,9800 Os 6.0, 9900 Os 7.0 and Os 7.0 9320 ect... When this default menu (Close, Application Switch) changing the language according to the language of demand. These are the ways that they do not change language according to the language of the camera.
Hello
It's the Os.
I confirm with the BlackBerry support team.
-
Change according to the instructions of vmware tomcat http port, still gives error
According to this doc, Centre of Documentation of vSphere 5.5 I should be able to change the tomcat port http. But once I do, I see the errors below. I guess there are other conf files to change, but I can't find those who. I need to change the port to something else than my failure to support another agent of products I need on the vcenter server.
Impossible to recover data on the health of https://localhost:443/VSM/health.XML
Impossible to recover data on the health of https://localhost:443/EAM/eamService-Web/health.XML
Thanks for the reply. After working with support and troubleshooting a bit to mine, vmware help has found a workaround.
I stopped the services of vcenter server and Web services.
I changed the port 8082 to meet my needs in the bio line - vmssl.http.port = 8082 in the file C:\Program Files\VMware\Infrastructure\tomcat\conf\catalina.properties
VMware support also noted this line in that same case, bio - vmssl.https.port = 8443
We changed the 8443 port to meet my online "
https://localhost:8443/eam/eamService-web/health.xml " present in the sectionconfiguration in the file C:\Program Files\VMware\Infrastructure\VirtualCenter Server\extensions\com.vmware.vim.eam\extension.xml We changed the 8443 port to meet my online "
https://localhost:8443/vsm/health.xml " present in the sectionconfiguration in the file C:\Program Files\VMware\Infrastructure\VirtualCenter Server\extensions\com.vmware.vim.vsm\extension.xml I changed the port 8082 in line
http://127.0.0.1:8082/vsm/ovfConsumer / in the file C:\Program Files\VMware\Infrastructure\VirtualCenter Server\extensions\com.vmware.vim.vsm\extension.xmlI started the server vcenter and webservices. Then I start the service in a conflict that also used the port 8081, I have since the change of port 8082 in my configuration of vcenter. In my case, port 8081 used for communication of McAfee Agent throughout our whole environment. After all this, no error is reported by the vcenter service monitor, and I can hit the URLS of health via a browser and get a valid answer.
-
Hallo,
I'd like to go to the page that contains an af:table of 2 different menus: "Edit/insert data" and "read data".
Is it possible to make a page that is read-only when the user accesses by "Read data" and that allows for changes when you access it through 'edit/insert data?
Or do I have to create 2 different pages?
Thank you
Federico
If the menu is outside the region, you must pass a parameter in the area and read this parameter passed within the region. You cannot directly access the bean of expanded view of inside the workflow.
You can check out my blog 11.1.1.5.0 JDeveloper: router to use to create new or modify existing line | JDev & ADF Goodies
That uses a router within a workflow to decide which page to display based on the parameter. Using this solution you can easily implement your use case using two different pages to show the table, a read-only, and the other to change.
Timo
-
Page layout continues to change according to the configuration of the computer
I created a very simple webpage beginner with a simple spry menu bar. It works fine, but when I open the page on a screen larger than the standard, it continues to change my layout. My menu bar Spry on my screen is 4 columns. When my CFO opens to her, she pushes the last column under the first. Is it possible to lock columns so that this does not happen?
Ok. Change all that:
To do this:
And you should be good to go.
Nancy O.
-
error message Popup on change based on the value of selectlist
Hello
I am new to Oracle Apex. I have a selectlist in my page. I need popup, an error message when the value is changed according to the value of selectlist. For example, the selectlist can have "Approved", "Rejected", "Started", value "not started". When I changed the value "Rejected" if it is already "approved" a popup/inline error message should appear and say that we cannot change "Approved" to "rejected". Similarly, I need to have 5 these validations on the fly (when the selectlist is changed). Also when the condition is the error value will not change (in the previous example, the value will not change to 'Rejected'). Is there a way to do this?~ Best regards,.
Nadège
Hi Jeevin,
You can use jQuery or Javascript to manage validations customized to your selection list onchange.
Something like
OnChange = "your_custom_function (this.value); »
and you can define your function as
function your_custom_function (value1)
{
If (value1 == "Rejected")
Alert ('Test Alert');
}
Logic may be all you need.
It may be useful
Thank you
Sunil Bhatia
-
Search bar and address bar change size according to the length of the URL. How to keep my search bar the same size?
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.org/KB/safe+mode
-
Can I use actionscript to change the size of an object displayed according to the proximity of objects 2?
As in the 2 closest objects get, plus another Gets?
Yes, simply change the properties of scale based on the distance.
-
change the size of the swf according to the size of html page
Hi experts
I want to change my swf size according to the size of the html page in which she opens
such as if the page size is 1024 x 768 then swf should scale to this size
If its 700 per 500 also sw should change its size is possible
I want this for my animation initially FRO m edge on the page
Basically, I do not know how this has tried various options for last week no chance
There are 100% option for swf that will scale the size of the swf to 100% of the page, but it does not toedge of page edge
can anyone helpQuote:
Posted by: newsgroup user
Thanks urami who workedDarr_darshan wrote:
> Hi experts
> I want to change my swf size according to the size of the html page in which it
> open
> such as if the page size is 1024 x 768 then swf should scale to this size
> If its 700 per 500 also sw should change its size is possible
> I want this for my animation initially FRO m edge on the pageFirst of all, the size of the screen is never the same as the size of the browser to not use if
you want to keep the proportions when scaling your files and do not distort the
content. Keep in mind that the browser has its chrome all around, more grand, being on top
of the screen (navigation), bar State and borders on the left and right sides.
Second, always resize movie to the top, never down. While the scaling of movie you able to
Keep your text, not the case when you descale movies especially with small text.
who become illegible. Then you make movies in (example) 600 x 400 and intensify their
instead.To fill the browser window, go to file - publish setting and on the HTML tab
change the PIXEL size of PERCENT and set 100% x 100% - publish.
Open the published html document recently opened in your favorite HTML editor, such as Notepad.
Dreamweaver and Frontpage, adjust the margins up, down, left and
right to zero pixel. This will make it fill the window entirely. Flash is
not give this possibility.--
Best regardsUrami
--
!!!!!!! Merry Christmas!
&
Happy new year
If you want to send me a message - DO NOT LAUGH at MY ADDRESS
-
Why I can't change the size or orientation of a figure that I did with the rectangle tool?
Hello, today I updated my CC and when I use the rectangle tool, it does not give me the nodes to scale or rotate, but if I create a character with the pen tool nodes appear, I am on a MAC, I already try on PC and it has no problem, someone knows what's going on?
Hi Karla Leo,
The problem has been reported to engineering, and they are working on it.
However, the problem seems with an earlier version of MAC OS x. It works great in 10.9.x leave.
I hope this helps.
Kind regards
Sumit Singh
-
Satellite L50 - A-1 DG: according to the colors, lighting changes automatically
Hello
I have a Toshiba Satellite L50 - A - 1 DG with Windows 8.
Only if my computer is on battery power, the brightness of the screen seems to adjust automatically according to the displayed color.You have a solution to this problem?
Thanks in advance
> I have a Toshiba Satellite L50 - A - 1 DG with Windows 8.
I guess you wanted to say the Win 8.1 and not win 8 because the laptop came preinstalled with Win 8.1
However, on computers laptop Toshiba Utilities and tools Toshiba are preinstalled that provides and laptop different control functions.
One of the pre-installed tools is the TOSHIBA display utilityViewer includes Office text utility size, divide the screen utility and other parameters.
I assume you find responsible option of change of backlight in this display utility. -
How can I change the thickness of the line on the Rectangle tool in Adobe Illustrator 12?
How can I change the thickness of the line on the Rectangle tool in Adobe Illustrator 12?
The object selected, use the dash Panel to increase the size of the stroke.
-
Adjust the size of the rectangle of the edge?
Is it possible to adjust the properties of the size of a Rectangle from a point that is not in the middle of the rectangle?
I'm not scaling, I wonder about the evolution of these two properties:
Rectangle > Rectangle drawn > size X, Y
This expression will make the size of the rectangle to change the lock in the center of the left edge of the rectangle when you adjust the size of the rectangle:
Agree = content("Rectangle_1").content ("mapped Rectangle 1") .size [0] / 2;
y = content("Rectangle_1").content ("mapped Rectangle 1") .size [1] / 2;
[agree, value [1]]
Change the last line to it to expand from the Center to the right edge;
[-agree, value [1]]
These are the movements of the expansion to the top Center:
[value [0], y]
And this for the top left corner:
[agree, y]
You'll have the hang of it. Expressions are easy once find you the syntax.
-
Is it possible to scale the pages according to the browsers of different size?
Is it possible to scale the pages according to the browsers of different size?
Your question has been addressed in our FAQ forum under the heading: you can change the layout of your site based on the browser, the size of the screen? (delicate design)
Please see the following link for more information: http://forums.adobe.com/message/4313082#4313082
-
How can I change the frame surrounding a title created with the Rectangle tool?
Pre 7, I was create titles (for example: title > new title > default always, etc.) for a long time and using many ways to manipulate the text (type, color, size, animation, etc.). Today, I tried to use the Rectangle or Ellipse tool tool (or the line tool) and they created a nice 'framework' (like a picture frame: artistically designed and colored) and I can change the background color in the frame and the place of any text (also background image, etc.) inside. However, I couldn't find any way to change the 'framework' or the general style of the title objects. Is it possible to do, or it's the only design that can be created with these tools? I would be very happy any help (impossible to find in this site u2u). Thanks, Laci.
LACI,
Yes, you can apply Styles to several Rectangles (or other shapes), to simulate an "image." The Styles should appear as the text in the Styles Panel. As you work with shapes, but look a the Styles applied to the text, it is not perfectly intuitive as to what look like these Styles with shapes.
Personally, I find that make things like "frames" in Photoshop and then import the PSD in the meadow are much, much easier. In this case, I would place the PSD on 1 video track (except if I wanted it appear superimposed on my video (like a PiP), can make the text in a title of PrE and place it above the PSD.
Here is an example:
It is a simple "picture frame" created in PS. I used a fixed image, instead of the text in this case. These could be "grained," "granite", etc.
Much more control and tons of effects and filters that can be applied.
Good luck
Hunt
PS - It's PrPro, so the GUI will be quite different, but things work the same way.
Maybe you are looking for
-
My whatsapp necessary updated and I had problems making inturn I reset everything on the iphone5 it says my whatsapp was purchased and download free of charge despite being there download it still only downloads help please what should I do
-
Since the game The Sims DVD ROM, it has black resident of both sides of my screen
Original title: why after someone using the screen of my laptop dvd player become less than full page and enlarge it does not help either? girl plays the sims then all pages size is 11/2 Inc. black on both sides of the page?
-
Resolution of the screen too big to change it back.
I changed the resolution of the screen via the control panel - display - settings - advanced - general. The police is now huge; This is why, when I try to restore, I can't at this place or on the screen longer. (It is a computer of mercury used as
-
HELP blackBerry Smartphones ' unsupported media type: application octet_stream "?
I just installed OK icon for USA Today on my "BOLD". The icon is there, but when I select it, I get "unsupported media type: application octet_stream" or "unable to connect to the internet, try again later!" The internet is fine as can get in simply
-
Just replaced main hd, reloaded win7 and spent the last days of torque tuning system and now the 2nd today a system crash: blue screen. thought with a new disk and memory, which was bad, new W7 and meticulously careful re - build I have no breaks