changes not applied

Similar Questions

• Windows media player will not apply changes to databases of media

  Arrgh.  Windows media player has great potential but is so volatile.  I already reset the program and now I find I have to re - enter old info on the songs I copied analog.  the final problem is that it does not apply the information from the databases of media.  Looks like it's going to make the changes - but it doesn't.  Is there a way to reset the protocols for the application of media without resetting my together huge database.  hoping you can help.

  What type of file in your music files (MP3, WMA, WAV...)?

  To resolve this problem, delete the Windows Media Player database. To do this, follow these steps:

  Usually, also, had to stop the WMP network sharing Service before you rebuild the library. Click Start, type services.msc in the search field and press ENTER. In Services, locate the Windows Media Player Network Sharing Service. If its status is started, double-click the service, and then click stop.

• Cannot change the calibration of the IPR. screen does not apply, say it will become changed after stopping but never changes. All solutions?

  the screen that allows you to change the calibration of dpi is not a button apply and so you can never change the size. Any suggestions

  Click OK - Ok means apply and close

  --
  ..
  --
  "John Dratch" wrote in message news: 4d2f6f68-4357-4252-820b-bef9b2463ca3...
  > the screen that allows you to change the calibration of dpi is not apply it
  > button and, therefore, you can never change the size. Any suggestions

• Batch edition do not apply any changes, what happens?

  I have a problem for years, but only decided to ask for help now.

  Usually I would import all my photos (smart preview convert) then...

  (1) select all (usually from 500 to 1500 images)

  2) press AUTO adjustment

  (3) and then adjust the exposure 0

  4) wait for the settings to be applied

  I do this because usually everything works fine except except automatic exposure, I want to take care of that myself.

  I find that not every image will show set to 0, there will be lots where exposure is not resetting.

  The same goes for any other adjustment of the lot, I can select all and change say points, contrast, black or white, but the changes

  not apply to all images.

  What I am doing wrong?

  Hi rueyloonRufus,

  It is hard to say based on your description exactly what might happen. However, I can offer some tips to help just shoot and maybe to get to the bottom of this. (According to me), I would like to start with the premise that you not actually select all images in the folder (for various reasons).

  1 make sure you are in a view of the folders (under 'files' in the left pane) and none is not a 'previous import' or 'Collections '.

  2. open the film and watch the status message to see how many pictures is selected.

  3. make sure to develop all the batteries. Here in this screenshot, you can see the shows of the film ' 82 109 / 82 selected ' once I pressed on "Edit > select all.» This is because I have collapsed of batteries, and pictures in a reduced battery are not selected. Use ' photo > stacking > expand all stacks.»

  

  Try these steps and see if you can reproduce this problem or track. In particular, the status of the film strip line should give you some clues. Let me know what you find.

  Mike

• When I try to change the PS CS6 workspace, I get the following error message: "Could not apply the workspace because of a program error." Does anyone have a solution to this problem

  When I try to change the PS CS6 workspace, I get the error message of passage: "Could not apply the workspace because of a program error." This happens when I try to change the default setting (Essentials) to any other predefined workspace.  Does anyone have a solution for this problem?

  If this fails, Menu Finder > go > go to folder

  ~/Library/preferences/Adobe Photoshop CS6Settings/workspaces (modified)

  Move the change case of workspaces on the desktop, and then restart the Psalm

• Master Page Bugs? Do not update the changes or apply correctly, New Page.

  I work for our new models of project with master pages and have found what appears to be several major problems:

  1 when I make changes in the Master Page (.htt file), none of those changes propagate to the topics that have been attributed to this Master Page. He shouldn't do that?

  2. as an alternative, I tried to apply a Master Page to several topics on the pod to the list of topics. The first problem with this is that you can not apply the existing Master Page. So, I had to create a new Master Page with my changes and then tried to apply it. However, several problems occur. First of all, none of the new Master Page formatting appears correctly. Second, for some reason it is duplicate the breadcrumbs at the top of the page (each master page, before and after only had a breadcrumb). It seems to have combined some of the formatting both before and after the template.

  I must also point out that when I apply the Master Page with changes to a new topic, it works correctly.

  I have read the documentation carefully and that you feel that I'm doing this correctly. The problem seems to be that the feature does not as promised. I see this as a serious problem. Our models are likely to change over time, and I need the ability to apply changes massively.

  Anyone know what could be the problem?

  Hello

  You must first understand Master Pages are used in two completely different ways. Looks like you make changes to the space reserved for the body of the Page Master and expected to see changes influence-related topics. Sorry, but that never worked.

  There are therefore two ways Master Pages are designed to work in RoboHelp.

  Method 1 - used to infuence the EXISTING content.

  Maybe you have created 1,000 and now you want to add a header, footer, or both to these existing entries. You set a Master Page and add a header, footer, or both to the Page Master and you associate it with topics. All of these topics now have a header or footer. Any changes made to the header and/or footer is filled throughout with all related topics.

  Method 2 - used to influence the new items that you create.

  You may know that you want to create many subjects that should have the same look and feel. Maybe all of them begin with a table that contains an image and text. So you set a Master Page and configure the space reserved for the body you want to see it. When you create new topics, you point to the Master Page so that as the topics are created, the content of the body of the Page master is filled in on the subject as a starting point. Once the topic has been created initially, the changes to the Master Page ARE NOT reflected in the topics. This method works identically to make a copy of a document. The copy is identical to the original. And any changes made to the original will be never copied during the copy. Only NEW copies will receive the changes.

  The breadcrumbs go, you have probably GLOBAL breadcrumbs activated in the recipe for the presentation of a single Source. This means that everything gets crumbs during the creation of the exit process. If you try to use the SELECTIVE Breading by adding space to the Page master, you must disable the breadcrumbs GLOBAL to avoid double.

  I hope that helps a little... Rick

• First HP settings not applying is not the CASE

  I just got the first HP, and I live where the default decimal mark is the decimal and thousands separator is the point.
  Having the ability to change the decimal mark on the parameters is great, the only problem is that it does not apply to the CASE method, which makes it very confusing.
  
  I do something wrong, is it meant to be like that or is this a bug?
  
  T.I.A., Gabriel

  Hello

  No, you're doing nothing wrong.

  The CASE used by HP does not support the selection of decimal point.

  Cyrille

• Cannot install KB980182 + 17 other updates - error 0x8007371c or "does not apply to this system".

  I am running Vista Home Premium with Service Pack 2, 32-bit. For example, I have the 8.0.6001.18828 version. I use AVAST AV and Comodo Firewall. I've never had McAfee.

  I have 18 'Important' Windows Vista updates will not be installed: several updates, several windows Vista updates, etc. Back to 08/12/09 and 27/04/10 the most recent. They start to add up. Here is a screenshot of them:

  http://img94.imageshack.us/img94/5003/updatesl.PNG

  For about 11 of them, let's say in the meantime (until restarted), but then after the resumption, that they do not have to install but have no error code. The event viewer indicates that they are 'not applicable for this system' (then why they have been downloaded?). Who does not apply are: KB905866 KB971468, KB972270 KB979683 KB978601, KB977816, KB978338, KB979099, KB974318, KB980248, KB980232.

  The rest of them, as (for example, KB980182) will fail because of an error of 8007371 C. In Event Viewer, they all have a sequence of error similar to this one (it's for KB980182):

  ###

  11:10 - Windows Servicing has completed the process of configuration KB980182 (update) package in State to install Requested(Install Requested)
  11:10 - Windows Servicing has not completed the process of change update 980182-39_neutral_PACKAGE of packaging KB980182 (Update) in Staged (Staged) State
  11:10 - Windows Servicing has completed the process of configuration KB980182 (update) package in State to install Requested(Install Requested)
  11:10 - Windows Servicing has not completed the process of change update 980182-38_neutral_PACKAGE of packaging KB980182 (Update) in Staged (Staged) State
  11:10 - Windows Servicing has completed the process of configuration KB980182 (update) package in State to install Requested(Install Requested)
  11:10 - Windows Servicing has not completed the process of change update 980182-37_neutral_PACKAGE of packaging KB980182 (Update) in Staged (Staged) State
  11:10 - Windows Servicing has completed the process of configuration KB980182 (update) package in State to install Requested(Install Requested)
  11:10 - Windows Servicing has not completed the process of change update 980182-2_neutral_GDR of packaging KB980182 (Update) in Staged (Staged) State
  ...
  [several other of these errors, with '2' to 36, even numbers only]
  ...
  11:11 - Installation failure: Windows failed to install the following update with error 0x8007371c: Cumulative security update for Internet Explorer 8 for Windows Vista (KB980182).

  ###

  Things I've tried:

  1. installation after a clean boot - at first, seems to be successful that I can get the list to the left of 1 or 2, but at some point given shortly after they all reappear.

  2A ran the System File Checker that comes up: "Windows Resource Protection has not found any breach of integrity."

  3 reset Windows Update components (manually or with the "FixIt" solution to http://support.microsoft.com/default.aspx/kb/971058?p=1)

  4. stop of services related to Windows Update, rename system folders, saving and then associated DLL files by restarting services (as described here: http://social.answers.microsoft.com/Forums/en/vistainstall/thread/ed275467-5580-41dc-9ccc-3c1e22c6fd28)-same result

  5 install in safe mode - gives me "Setup has encountered an error: 0x8007043c.» This service cannot be started in safe mode. »)

  6. scan the hard disk for errors (e.g., check disc) - Nothing found

  7. search for viruses, Trojans and malware - do not have

  8. install with UAC, anti-virus and firewall off the coast - same result

  9 install the upgrade preparation tool system for Windows Vista (KB947821) [January 2010] (with UAC, AV, etc off), but the installation 'failed' (no error code). Installation in safe mode it gives me the «...» "0x8007043c. this service cannot be started in safe mode."

  10. manually install them - same result

  A short circuit contact MS have exhausted the options?

  Thank you. This is not a beta or Release Candidate build both fuhgeddaboutit and open a free support incident.

  PS: I think you will find that the updates are not installed due to infection hijackware, Kurt.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Wallpaper not apply and there is no restriction placed on it by society. What should I do?

  The wallpaper on my cptr will not apply and it is not available in the control panel/office menu.  There is not a restriction placed on it by society. When I try to apply a photo "sample" to set as the background, the screen flashes (sort of) but nothing changes. When I restart my cptr as it stops I see wallpaper for about 2 seconds, s ' Please help!

  Hi ShannonThornsbury,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  3. What is not available in the Office of the control panel menu?

  The article below and check if it helps.

  Options to change the desktop wallpaper may be missing or unavailable on a Windows XP-based computer

  http://support.Microsoft.com/kb/921049

  If the article above does not help then I would suggest that you install the updated drivers for the graphics card on the computer by visiting the card manufacturer or the computer manufacturer Web site to download and install drivers, check if it helps.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• The Windows Update stand-alone Installer returns an error: "update does not apply to your system.

  Preparation of my laptop running windows Vista Business SP2 to upgrade to Windows 7; Downloaded Windows Easy Transfer for Windows Vista to Win 7 32 bit format. run the download and the "Windows Update Standalone Installer" then begins poster "the update does not apply to your system"

  Have you tried several downloads, including the 64-bit version (I checked that my system is actually 32-bit); logged on as Admin; tried to change the security settings for file - no change in this inability to install.

  Ideas?

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=1B544E90-7659-4BD9-9E51-2497C146AF15&displaylang=en

  Download and run the Windows 7 Upgrade Advisor to see if your PC is ready for Windows 7. It scans your hardware, devices, programs for known compatibility issues installed, you gives advice on how to fix any problems found and recommends what to do before upgrade you.

  See you soon.

  Mick Murphy - Microsoft partner

• True color has not applied the requested settings - Dell Inspiron 5547

  I bought Dell Inspiron 5547 last wee.

  Since day 1, I get error of "True color has not applied the requested settings" . Now running Windows 10 (upgrade of 2 days).

  Tried to update all the drivers. Is there anyone facing the same issue and got a fix?

  Thanks in advance!

  

  go to programs and features in windows 10, there you will find TrueColor application right click and press change, it will be to repair or reinstall the application. Even though I have upgraded to windows 10, true color works very well with me, yes sometimes it does, sometimes only. In windows update, you will get the update for graphics card intel it will be

  Intel Corporation - graphic adapter WDDM1.1, WDDM1.2, WDDM1.3, WDDM2.0 graphics card graphics card graphics card - Intel(r) HD Graphics Family

  just to update these things also, I remember seeing somewhere on the internet that intel could be the culprit for this problem.

  After that repair is TrueColor 99% chance that it work.otherwise uninstalls true color and redownload it from there

  

  Last thing, I would say, is dell people working on this issue itseems like they said to my friend who had the same problem when he called. wait patiently they release the fix.

  Answer to what's going on

• Intel GMA > graphics properties > not applying color correction NOT the settings automatically after restarting PC

  Hello

  I just bought a Dell Netbook for my wife and after the opening of the Intel Graphics media accelerator control panel (driver for mobile 945 express chipset family), I tweaked the color correction to eliminate the bluish by default, BUT each time that I re boot the PC, these parameters are not re applied and I got to go again the same control panel and re still apply them (they show very well on the Panel configuration GUI just as I twisted them before the process of re - start, but they have simply not applied when the re PC starts).

  Thank you all in advance for your suggestions ;-)

  Enrique Diazruanova

  Hi Diazruanova,

  You recently did a software or a hardware change?
  You have to use this option with success on your new computer?
   
  Sounds like a driver issue, I recommend you update readers of the adapter to the display of the manufacturer's Web site.
  Here is the link for the center of ddownload from intel, enter model number and search for drivers according to the 32-bit version or 64-bit Windows 7.
  http://Downloadcenter.Intel.com/default.aspx
   
  For more information see the link below:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Here is the link to the support technology guide:
  http://support.Dell.com/support/index.aspx?c=us&CS=19&l=en&s=DHS& ~ CK = mn

  Important note:
  This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• F0169 (host name ESXi) service profile could not apply the configuration

  I just created a new vNIC on 2 of my new hosts. I created the pools MAC address before you start. As I create the vNIC I got the following error:

  Your changes:

  Created VNIC FTNNIC

  Create: network fault tolerance

  Fail the Configuration of:

  Profile service (ESXi host name) org-root-[(Server:sys/chassis-2/blade-8)]

  Failure reason: connection-investment

  There are not enough global resources

  Not enough available vNIC

  Are you sure you want to apply the changes?

  I click Yes, and then get F0168 error service profile could not apply the configuration?

  What I do wrong here and how to fix it?

  Can you please more information, for example

  -What type of Blade model, input-output adapter

  -Version UCS

  -ESXi version

• Properties of the button - do not apply text selections

  I am facing a problem with the text appearance options in the button properties.  I can change the color of the border and fill color, but no matter what I do with the size of the font or the color of the text-, it will not take my changes.  When I close the edit form, what I see is an empty box.  The button is there that I applied a border, but the text does not appear. It is stuck on the white police, I guess.  Any suggestions on how to get the text changes to apply?

  Hello

  Are you facing this problem on all PDF files or just one? Also, if you want to add a label to the button go to the Options tab and name the button label.

  Thank you

  Abhishek

• predefined text will not apply - it asks me to return, but after that the text is not performed?

  Hi, im a horrible time with text presets.

  I am trying to add a blur text evaporate pre-set to my text layers.

  I dragged and dropped the preset on the text layer, and it seemed that it was necessary to make it as if a change was applied-it. but after that rendered nothing happens to the test, no changes have actually been applied. no error message appears and I can't find an answer to this anywhere.

  any help would be greatly appreciated!

  Ive attached a screenshot of what it looks like. in the screenshot I've dragged him evaporate preset above the layer, that is why this article is not green up, but even after that I return however, the text has no effect as if nothing has been applied.

  

  Edit: ive found if I double click the preset, it sends the white words and I can't make it visible? I'm so confused.

  You might have added the preset to an incorrect point on the text layer?

  The preset adds keyframes for the text in the current-time indicator layer, animating the range selector in a band called "evaporate facilitator" to compensate for the value of the scale/opacity/blur

  Move keyframes to the start & end time desired can give you what you are looking for.

  I don't think that there is no color change in this preset.