Changing servers GANYMEDE

Similar Questions

• I changed servers from Comcast of Qwest and now all the games that came with my Windows XP have disappeared. How to recover?

  I'm trying to find my games came with my computer, mainly solataire. When I changed the servers disappeared somehow. I want to find them. My Games folder on the accessories link says it is empty.

  Hello

  You can add games by following the steps mentioned below:
  1. with the CD Windows XP in the CD drive, click Start, and then click Control Panel.
  2. double-click on add or remove programs.
  3. click on Add/Remove Windows components.
  4. in the Windows Components Wizard, click Accessories and utilities (the words, not the box), and then click details.
  Use the appropriate method.
  5. If the Games check box is not checked (no games are installed), and you want to install all of the games, click to select the Games check box
  Click OK, and then click Next.

  Refer to this article for help:
  
  How to add or remove games in Windows XP:
  http://support.Microsoft.com/kb/307768

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Changing servers vCenter

  Hello

  I have a vCenter Server 4.0 U1 with a bit of Connection Manager servers connected to it. I need to change the server vCenter for an another 4.0 U1. I can simply change the vCenter server info in the connection without interupting Manager any of my stocks of VDI?

  Thanks for the help

  Aaron

  We had a particularly bad experience with view after a vCenter server change, so I may be too paranoid, but I highly recommend opening a pension with VMware case before making the change.  I believe that the VMs system (ESX host also) are saved with vCenter and that the 'recording' information is the database of the view, it is essential that this information is not changed in vCenter.  If it is changed, the pointers of the database of the view will not be up-to-date and you will have big problems.  I think that as long as you point your new instance of vCenter to your existing database of vCenter, everything will be fine, but I just would make sure with support before doing so.  Good luck.

• I can't send pictures. I need to change servers.

  I can't send pictures. I have a different server now than trying to send

  I can't send pictures. I have a different server now than trying to send

  =====================================
  Maybe you have a problem with the settings
  for your default e-mail client. What follows
  links may be worth a visit:

  Windows Vista-
  Change the default e-mail program
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-default-e-mail-program

  Windows Vista-
  The default mail Client configuration
  http://freeemailtutorials.com/microsoftWindows/setDefaultEmailClientOnWindowsVista.CWD

  How to restore or remove Windows
  Mail of default programs
  http://www.Vistax64.com/tutorials/186933-Windows-Mail-restore-remove-default-programs.html

  Windows Vista-
  How to add backs and together
  Windows Mail default associations
  http://www.Vistax64.com/tutorials/83185-Windows-mail-default-associations.html

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Problem setting 7606 router for authentication GANYMEDE +.

  Hello community support.

  I have two routers Cisco 7606 I tried in vain to have users authenticated using servers GANYMEDE +. As noted below, I have two servers (1.1.1.1 and 2.2.2.2) accessible via vrf OAM which is accessible from desktop to ssh login. The real IPS and FFS have been changed because it's a router of the company.

  I use two servers to authenticate on a lot other devices Cisco network that they work properly.

  I can reach the vrf servers and the source in use interface. I can also port telnet 49 if the source interface servers and the vrf.

  The server key is hidden, but at the time of configuration, I can see that it is correct.

  The problem is that after confuring for authentication RADIUS, the router always uses the password to enable instead of GANYMEDE. While debug output shows "incorrect password", why not the router authenticates using GANYMEDE? Why is he using the enable password?

  Please review the outputs below and help point out what I may need to change.

  PS: I have tried many other combinations, including obsolete without success, including the method proposed in this page.

  http://www.Cisco.com/en/us/docs/iOS/sec_user_services/configuration/guide/sec_vrf_tacas_svrs.html

  Please help I'm stuck.

  ROUTER #sh running-config | s aaa

  AAA new-model

  AAA server Ganymede group + admin

  Server name admin

  Server name admin1

  IP vrf forwarding OAM

  Ganymede IP interface-source GigabitEthernet1

  AAA authentication login admin group Ganymede + local activate

  AAA - the id of the joint session

  ROUTER #sh running-config | dry Ganymede

  AAA server Ganymede group + admin

  Server name admin

  Server name admin1

  IP vrf forwarding OAM

  Ganymede IP interface-source GigabitEthernet1

  AAA authentication login admin group Ganymede + local activate

  GANYMEDE Server Admin

  1.1.1.1 ipv4 address

  button 7 XXXXXXXXXXXXXXXXXXXX

  GANYMEDE Server admin1

  2.2.2.2 ipv4 address

  button 7 XXXXXXXXXXXXXXXXxxxx

  line vty 0 4

  authentication admin login

  ROUTER #sh Ganymede

  GANYMEDE + - public server:

  Server name: admin

  Server address: 1.1.1.1

  Server port: 49

  Opening of socket: 15

  Firm grip: 15

  Write-offs of socket: 0

  Socket errors: 0

  Socket timeouts: 0

  Failed connection attempts: 0

  Total packets sent: 0

  Recv packets total: 0

  GANYMEDE + - public server:

  Server name: admin1

  Server address: 2.2.2.2

  Server port: 49

  Opening of socket: 15

  Firm grip: 15

  Write-offs of socket: 0

  Socket errors: 0

  Socket timeouts: 0

  Failed connection attempts: 0

  Total packets sent: 0

  Recv packets total: 0

  Oct 22 12:38:57.587: AAA/BIND(0000001A): link i / f

  22 Oct 12:38:57.587: AAA/AUTHENTIC/LOGIN (0000001 a): Select method list "admin".

  Oct 22 12:38:57.587: AAA/AUTHENTIC/ENABLE(0000001A): action of treatment application LOGIN

  Oct 22 12:38:57.587: AAA/AUTHENTIC/ENABLE(0000001A): reported GET_PASSWORD

  Oct 22 12:39:02.327: AAA/AUTHENTIC/ENABLE(0000001A): action of treatment application LOGIN

  Oct 22 12:39:02.327: AAA/AUTHENTIC/ENABLE(0000001A): reported FAIL - wrong password

  22 Oct 12:39:04.335: AAA/AUTHENTIC/LOGIN (0000001 a): Select method list "admin".

  Oct 22 12:39:04.335: AAA/AUTHENTIC/ENABLE(0000001A): action of treatment application LOGIN

  Oct 22 12:39:04.335: AAA/AUTHENTIC/ENABLE(0000001A): reported GET_PASSWORD

  Oct 22 12:39:08.675: AAA/AUTHENTIC/ENABLE(0000001A): action of treatment application LOGIN

  Oct 22 12:39:08.675: AAA/AUTHENTIC/ENABLE(0000001A): reported FAIL - wrong password

  22 Oct 12:39:10.679: AAA/AUTHENTIC/LOGIN (0000001 a): Select method list "admin".

  Oct 22 12:39:10.683: AAA/AUTHENTIC/ENABLE(0000001A): action of treatment application LOGIN

  Oct 22 12:39:10.683: AAA/AUTHENTIC/ENABLE(0000001A): reported GET_PASSWORD

  Oct 22 12:39:14.907: AAA/AUTHENTIC/ENABLE(0000001A): action of treatment application LOGIN

  Oct 22 12:39:14.907: AAA/AUTHENTIC/ENABLE(0000001A): reported FAIL - wrong password

  ROUTER #sh worm

  Cisco IOS software, software of c7600rsp72043_rp (c7600rsp72043_rp-ADVIPSERVICESK9-M), Version 15.1 (3) S3, RELEASE SOFTWARE (fc1)

  Technical support: http://www.cisco.com/techsupport

  Copyright (c) 1986-2012 by Cisco Systems, Inc.

  Updated Saturday, March 30, 12 08:34 by prod_rel_team

  ROM: System Bootstrap, Version 12.2 SRE (33r), RELEASE SOFTWARE (fc1)

  BOOTLDR: Cisco IOS software, software c7600rsp72043_rp (c7600rsp72043_rp-ADVIPSERVICESK9-M), Version 15.1 (3) S3, RELEASE SOFTWARE (fc1)

  The availability of ROUTER is 7 weeks, 5 days, 16 hours, 48 minutes

  Availability for this control processor is 7 weeks, 5 days, 16 hours, 49 minutes

  System returned to ROM by reload (SP by charging)

  System restarted at 20:00:59 UTC Wednesday, August 28, 2013

  System image file is "sup - bootdisk:c7600rsp72043 - advipservicesk9 - mz.151 - 3.S3.bin.

  Last reload type: normal charging

  Reload last reason: power

  This product contains cryptographic features and is under the United States

  States and local laws governing the import, export, transfer and

  use. Delivery of Cisco cryptographic products does not imply

  third party approval to import, export, distribute or use encryption.

  Importers, exporters, distributors and users are responsible for

  compliance with U.S. laws and local countries. By using this product you

  agree to comply with the regulations and laws in force. If you are unable

  to satisfy the United States and local laws, return the product.

  A summary of U.S. laws governing Cisco cryptographic products to:

  http://www.Cisco.com/WWL/export/crypto/tool/stqrg.html

  If you need assistance please contact us by mail at

  [email protected] / * /.

  Processor CISCO7606 - S (M8500) Cisco (revision 1.1) with 3670016 K/K 262144 bytes of memory.

  Card processor ID FOX1623G61B

  PLINTH: RSP720

  CPU: MPC8548_E, Version: 2.1 (0 x 80390021)

  KERNEL: E500, Version: 2.2, (0 x 80210022)

  CPU:1200 MHz, CCB:400 MHz, DDR:200 MHz,

  L1: D-cache 32 KB active

  I'm hiding active 32 KB

  Last reset of tension

  3 virtual Ethernet interfaces

  76 of the gigabit Ethernet interfaces

  8 ten interfaces Ethernet Gigabit

  3964K bytes of non-volatile configuration memory.

  500472K bytes of the map of PCMCIA ATA internal (512 bytes sector size).

  Configuration register is 0 x 2102

  To resolve this problem. Please replace the below listed order

  AAA authentication login admin group Ganymede + local activate

  with;

  Enable AAA authentication login default local admin group

  You have set the group name server as a list of methods and instead use admin as a group of servers, you used Ganymede +.

  Note: Please ensure that you have local users and enable the password configured in the case of Ganymede inaccessible server.

  ~ BR
  Jatin kone

  * Does the rate of useful messages *.

• Windows 7 continues to change my time!

  And which is screwed to the top of my watch and record TV.  It is very annoying.

  I saw the problem with Vista (even if the laptop with Vista my husband never does) and the only answer is about changing the boot time and have to do with the BIOS.

  Well, my Dell with Windows 7 will change time even when it is turned on and I checked the BIOS.  The BIOS is the right time.  When I noticed this tonight (there not save survivor), Win7 says it's 03:00.  It was at 21:15.  I shut down the computer and check the BIOS: 21:15.

  I even put this update automatically every 4 hours. How did get to 03:00?

  There will be a fix for this problem in Win7?  I tried to disable automatic synchronization, changing servers.  And for awhile, it remained solid but then again changed!

  Gabina

  MSDST

  Windows 7 there maybe a bad UTC offset setting?  It is perhaps timing hurt because of this.  Check your zone time and (less obvious) your regional settings in Control Panel.

  If it was useful, you can vote by clicking on the green triangle. If it solves the problem, click on propose as answer. Thank you!

• GANYMEDE + and local access connection

  Basic summary is that I want to have GANYMEDE + and local connection to access router on the vty lines.  So, I did the two groups below.  Goody obviously is what will use GANYMEDE and Console uses the local connections.  I divide them between 0-4 and 5-15.  It seems that whoever is more get first priority for authentication.  If I move the Console to 0-4, knit then the local users and GANYMEDE do not.   If I have Goody at 0-4, then GANYMEDE works, but local doesn't work.  I know I'm missing something simple.  Have two RADIUS servers, I doubt that the two will never back down, but in case I want user names Local to work.   If I apply an access list to 4-0 and use SSH, as well as a list of different access to 5 15 and use telnet, it seems to work that way but doesn't help me if the internet goes down and I am trying to access the router via SSH on-site.

  Thanks in advance.

  David

  AAA authentication login Goody group Ganymede + local
  local authentication AAA Console connection

  Line con 0
  the Console connection authentication
  line to 0
  line vty 0 4
  session-timeout 7
  exec-timeout 5 0
  authentication of connection Goody
  entry ssh transport
  line vty 5 15
  session-timeout 7
  exec-timeout 5 0
  the Console connection authentication
  entry ssh transport

  Hi David -.

  Correct me if I'm not understanding this correctly, but you want to use RADIUS servers for authentication ssh/console type and if they fail, you want the network device to use its local database.

  If that is correct you should not need dividing lines and assign authentication lists. The first tribute that you have:

  AAA authentication login Goody group Ganymede + local

  Lists the Ganymede + and the local database as a possible authentication methods. They will be processed in the order they are configured so that the device will be:

  1. use your servers GANYMEDE +.

  2. If the GANYMEDE servers + inaccessible then the local database is used

  You can test this by assigning 'Goody' to all your vty lines and then do your servers GANYMEDE + unavailable. To do as possible you can:

  -Restart the server

  -Stop the server interface

  -Disconnect the device its uplink network

  -Create a list of access on the uplink interface and connection block to the IP addresses of the servers GANYMEDE +.

  I hope that helps!

  Thank you for evaluating useful messages!

• GANYMEDE + traffic over the public Internet

  Hi all

  We have the network devices that do not have intranet/VPN connections on internal Central GANYMEDE + servers behind firewalls corp, I wonder what an acceptable practice to send the traffic of GANYMEDE + on the public Internet? GANYMEDE + payload is encrypted, but the attacker can always say that a package is the package GANYMEDE + with a sniffer.

  Thank you

  GANYMEDE servers + are available from Internet sources? (basically, it's a combination of if there is a static address for GANYMEDE servers + public address translation, and whether it is on the firewall devices Internet access policies to initiate traffic to the servers GANYMEDE +). If the answer to any of these conditions, it is not, there is no point in considering the possibility of sending the traffic of GANYMEDE + on the Internet because it would not succeed. If these conditions are met, then the traffic GANYMEDE + could be transmitted.

  And if the traffic could be passed then it becomes a question of what the company towards risk Internet access. The good news is that GANYMEDE data + encrypted so an attacker will not observe the data ID or password of the user. But the bad news is that you have now opened an attack vector to critical network devices. Only one person knowing the business position risk can determine if the benefit of GANYMEDE + for remote sites is worth the risk.

  HTH

  Rick

• GANYMEDE + peripheral unknown network or Client AAA package

  Hi all

  I can do connect using the set of credentials to the ACS server, log it showed:

  "Reason for failure: 13017 receipt GANYMEDE + peripheral unknown network or Client AAA package."

  I know there are a few changes on GANYMEDE + room for new catalyst IOS, so I consult the guide and it is the end of my config:

  AAA server Ganymede group + TAC_PLUS

  the AUTH server name

  RADIUS server AUTH

  ipv4 10.10.21.251 address

  key xxxxxx

  AAA TAC_PLUS authentication connection group Ganymede + local line

  TAC_PLUS AAA authorization exec group Ganymede + none

  AAA authorization commands 15 default authenticated if

  accounting AAA periodic update 1

  exec accounting AAA TAC_PLUS start-stop group Ganymede +.

  network accounting AAA TAC_PLUS start-stop group Ganymede +.

  connect accounting AAA TAC_PLUS start-stop group Ganymede +.

  My platform is

  -C6500 running on IOS 12.2 (33) SXJ1

  -ACS 5.2.0.26

  Need advice on this subject, thanks

  Noel

  Hello

  What is IP IOS appropriate set to network devices and the AAA Clients for the candidate countries? If Yes, what IP address is indicated on the failure of the ACS that includes the error "GANYMEDE + unknown cover peripheral network or Client AAA? ACS reports as unknown IP address when it is already set appropriately?

  Kind regards.

• Server outgoing apple ID address does not

  I can not send (but can receive) mail to my address ID on my Macbook Pro. It; s a pain because I have to keep switching servers when I try to send. I can paste it into another server to stop it, but why can't the address has its own mac for outgoing mail server? He has one for incoming. I think that it started after I upgraded to El Capitan but am not sure.

  Hey studiowriting,

  If I understand correctly, you have difficulties, sending mail from the Mail application in Mac OS.  Looks like you have changed servers in order to send.  I recommend you to read this article, it may be able to help solve the problem.
  

  If you cannot send or receive e-mail on your Mac.

  You can also use this link to find the settings for your e-mail account
  Search for e-mail settings

  Thank you for using communities of Apple Support. Have a good.

• Is it possible to edit URL bookmarks directly in large groups?

  I've got around a large amount of bookmarks including changed links because the site that it was changed servers/domains. As is a different URL than is in the bookmarks, Firefox doesn't recognize as the same page. In this case, the identification for each page remains the same; I just need to change the beginnings of each URL - for example, http://www.example.com/Lorem/Ipsum/ID34566 to https://pages.example.com/Lorem/Ipsum/ID34566.

  Is it not possible to go to the file where the list of bookmarks is stored and then just use a "find all" and "replace all" function or a similar way edit bookmarks massively?

  I guess ISPOL talk not in double Favorites, but rather many bookmarks for the same domain and for individual pages in this area.

  Firefox stores the bookmarks (and the history of navigation and downloads) in the places.sqlite file in the profile folder. With Firefox closed, a user could edit this file using a Sqlite Manager - external program or add-on to Firefox, but would require some knowledge of the sqlite query commands and be able to recognize a bookmark of the navigation history. But the last could be solved by deleting the browsing history before starting to change.
  http://www.sqlabs.com/SQLiteManager.php
  https://addons.Mozilla.org/en-us/Firefox/addon/SQLite-Manager/

  If I wanted to, I export my bookmarks in bookmarks.html format and save this file on my hard drive. Can I open this file in a text or HTML editor and change the URL as needed - using 'find '. Then I would put this file to import into Firefox.
  But before you import it in Firefox, I would delete all of the existing bookmarks in Firefox. HTML files imported into Firefox bookmarks, Add existing bookmarks, not replace them as with JSON backups.

  And these two aforementioned modules would probably choke on a fully duplicated set of bookmarks, depending on how many bookmarks that you have.

• How to transfer emails in an Inbox not assets replaced to the local files.

  I changed servers and cancelled my old server (courier service). I want to transfer all my old old my Inbox emails into folders, so I can delete the old account. I have a new account and a new Inbox that works very well. When I try to transfer emails from the old Inbox, the software tries to connect to the old server, which does more - and will not let me transfer the emails. I can see and read emails - so that they are on my local computer. I don't want to lose all the old emails. I no longer have access to my old server.

  You do this in "offline"?
  Thunderbird does not try to locate the server in offline mode.

  Status bar displays 2 icon blue screen down left if online.
  Click on this icon to switch to offline mode; It will then show 2 black screen icon.
  We may ask if you want to download messages, etc... to say no or later, but does not download.

  Or
  File > Offline > work offline.

• HOW TO HIDE THE ACTIVITY IINDCATOR? IT GIVES ME the DIZZY and NAUSEAUS FOR what IT PAST 24 / 7

  HOW CAN I REMOVE THE ACTIVITY INDICATOR IN THE LOWER-LEFT IN THE NEW VERSION?

  IT MAKES ME DIZZY and NAUSEAUS MOVING 24/7

  PLEASE LET ME KNOW ASAP BECAUSE I CHANGES SERVERS UNTIL IT HAS DISAPPEARED - ME GIVES A HEADACHE

  You can get Firefox 3.6.19 here:
  
  http://www.Mozilla.com/en-us/Firefox/all-older.html

• I have post Podcast RSS feeds the posts back to subscribers, but NOT in the iTunes store... why?

  I have an account for my Podcast. I publish the RSS and posts go to the each subscriber of iTunes accounts but do not publish in the iTunes store. I changed servers recently and have, in my opinion, done all correct use for my stream change... help

  Hello.

  If you choose a new workflow, you must:

  redirect subscribers to your new workflow

  notify the iTunes Store, you have a new stream.

  The two steps above are complemented by a redirect:

  Set up a 301 redirect on your server for your old power supply.

  Add the itunes: new-feed-url tag to your old feed. Example: http://example.com/new-rss-feed.xml

  Know how to do that in the section "Change your RSS Podcast Feed URL" here: http://www.apple.com/itunes/podcasts/specs.html

  Please share:

  The old RSS feed

  The new RSS feed

  URL of your iTunes.

  It seems that this has happened:

  First RSS feed-> Submitted to iTunes > user subscribed--> user gets new episodes

  Second RSS feed-->? iTunes has been notified? --> iTunes doesn't new episodes.

  Second RSS feed--> users get new episodes

  I recommend the deletion of your podcasts in the box my Podcasts in iTunes Desktop (to avoid confusion).

  Then, search the iTunes Store for the podcast put you to the test and you subscribe.

  In my Podcasts, click on the podcast > copy the link.

  Is this link, your NEW diet or your old diet?

  -Fan

• new server, broken the podcast in iTunes

  Hi friends,

  I've recently changed servers (same hosting co.), but all the RSS URL and directories has remained the same. Rss continues to update correctly (episode #121 was after the upgrade). But my podcast in iTunes is broken (but not on the web, or using Android).  https://iTunes.Apple.com/us/podcast/Trinities-podcast-feed/id690304581 I see even he must the support URL suitable for each episode, but what I (or others) get is an exclamation point when we try to listen to or download.

  Can someone help me diagnose this? If iTunes is somehow looking at the old IP address for my media? http://Trinities.org/blog/feed/podcast

  Thanks in advance!

  Dale

  The iTunes Store use the feed at http://trinities.org/blog/feed/podcast - your message is ambiguous: is it the old or the new workflow? If it is the old food he didn't y no redirection in place process or the "itunes: new-feed-url' tag or a 301 redirect.". For more information about how to move the store using a new stream, please visit http://wilmut.uk/move

  I subscribed to this feed in iTunes and he announced initially that there was a problem and then downloaded the episode high OK. However the shop does not play it. The likely reason is the URL for him:

  Media.Blubrry.com/Trinities/Trinities.org/blog/wp-content/podcast/Trinities 121 - do Christians and Muslims worship the same God part 2.mp3

  (I removed the http:// because otherwise the forum it will not display properly).

  You have spaces - spaces are not allowed in a URL and a browser will correctly substitute the % 20 for each space code and the application itunes seems to cope OK (it used do not) store does not, of course, this correction and therefore sees the URL that ends at the first space. You must replace each space with an underscore character and do the same for all other URLS that contain spaces.