GANYMEDE + peripheral unknown network or Client AAA package

Similar Questions

• Network that connects to the unknown network will NOT cut

  My computer automatically connects to an unknown network that does not appear on the available wireless networks. It does not disconnect and to log only when I turn off the wireless network. If I connect to another network, it disappears. I can't find any info through the help who can tell me how th shut down my computer to connect to this network. It's windows vista 32 bit

  Try to remove all the networks listed there and restart.

  Network discovery: WE (if you can see other computers)

  All private network (Public's hotspots, airports, etc.)

  What you set security on?
  Rob - bicycle - Mark Twain said it is good.

• "The feature you are trying to use is on a network containing the installation package"status.msi"in the box below.

  Original title: the status message appears on the start page.

  Message that appears at startup to the top: the component you are trying to use is on a network containing the installation package "status.msi" in the box below.  Click OK to try again or enter a different path to the folder containing the installation package "status.msi" in the box below.

  Hello

  Have a few questions that might help me to analyze the cause of the issue you're having with your computer.

  ·         When you get the message that says, "Status.msi file missing?

  ·         You have an installed HP printer?

  ·         You made any hardware or software changes the computer recently?

  Method 1:

  You can try to clean boot and check if you still get the error message.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the article.

  Method 2:

  If the problem persists, you can try to restore the system on your computer and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Hope this helps

• WiFi connected but unknown network and internet access

  Hello

  I think I've read enough forums and done enough research I finally post my question. My other laptop is Dell Inspiron 1545. It connects to my home network, but says unknown network and no internet access. I tried wifi and ethernet cable. The IP address is set to auto detect, I have reset the router, reinstalled the drivers for the card wifi, without success. Any ideas?

  -Taylor

  Only, I solved this problem on my Dell XPS, so I decided to share with the community.

  After the call to Dell and discover my warranty had expired (a little more than one year) and knowledge it would cost me $129 to get a response from time, I decided to go look for solutions. I found a thread of 2009, attributing the cause to a thing of access network Mcaffee. I knew that's the question because I don't personally like the major anti virus makes (they tend to pull up of stunts like this) so I had ripped my PC McAfee, as soon as I started. But this thread has helped me understand how to solve this problem.

  The problem seems to be an Agent of network access Protection on your system configuration (your start up programs). Make sure it is off. It wouldn't hurt also to try to disable the Internet Explorer ETW Collector Service (has a name shady so I nuked it too: P). this fixed my connection problem not identified immediately.

  Follow these steps (Windows 7):

  1. click on start.

  2. click on search at the bottom bar.

  3. type: msconfig

  4. press enter

  5. you should have a new window named System Configuration

  6. click on the Services tab.

  7. scroll down until you find: Network Access Protection Agent. It will be defined as stopped. It's normal.

  8. uncheck the box next to the network access Protection Agent.

  9. click on OK.

  10. restart your computer.

  Your internet connection should work now. If this is not the case, repeat the procedure until step 6, and then follow these steps:

  1. scroll down until you find: Internet Explorer collector Service to ETW. It will be defined as stopped. It's normal.

  2 uncheck Internet Explorer collector Service to ETW.

  3. click on OK.

  4 restart your computer.

  If these two steps don't fix your problem, go back to the Configuration of the system (Services tab) and it look for any other Network Access Protection Agent, such as Macafee named ones or something similar. Please be aware that uncheck essential services can cause pc problems, so make sure you know what you're unchecking before you do. If in doubt, feel free to google it.

  Another solution would be to temporarily disable your antivirus and firewall and see if that helps. If Yes, then you know where you need to focus.

  Good luck and hope it works!

• All the networks, when connected, display an unknown network without internet access.

  I have a laptop windows 7, and all recently internet my laptop has stopped working. Each network I want to connect to always says that he is an unknown network and that it is connected but has no internet connection. Anyone know what could be causing this? I can't update my drivers, as I do not have to download it from internet. One of my friends recently tried to configure something to its WiFi network via my computer, something in this direction, pourrait it screwed my computer somehow?

  Hello

  Thank you for contacting Microsoft Community.
  Perform the following steps in order:
  1. click on start.
  2. type network and sharing Center , and then press ENTER.
  3. in the left pane, click on change the parameters of the map.
  4. Select the network adapter appropriate (wireless or wired).
  5. right-click on it and click on Properties.
  6. in the Properties dialog box opening, networking, tab scroll down until you see Internet Protocol Version 4 (TCP/IPv4).
  7. select it, and then click Properties.
  8. in the dialog box, select IP address get automatically and DNS server automatically get an address.
  9. go to the next (alternate Configuration) tab.
  10. Select automatic private IP address.
  11. click on Ok.
  12. click on Ok.
  13. repeat the steps for WLAN and wired connections.
  14. now, try to connect to a network and check.
  If the problem persists, click Start-> type cmd-> press ENTER. Type ipconfig/all, press ENTER, and then provide the information displayed there.

• I am unable to connect with GANYMEDE + connection after the addition of aaa authorization network command

  Hello

  I test an aaa authentication switch when it does not communicate to ISE, and I found a strange behaviour. After that I added the aaa accounting and authorization authentication controls and reloaded the switch I was not able to connect to the switch with the GANYMEDE login

  The switch continued in cycles showing the banner give 3 times authentication failure message and then the cycle begins with the failed, banner and sign message

  I removed the aaa authorization network command and I reloaded the switch and I was able to connect successfully.

  could someone help me with this problem.

  Hi Nitesh-

  This command (... aaa authorization network) has nothing to do with the admin authorization on the n basis (in this case, the switch). This command applies to the network connections such as PPP, SLIP, etc.

  In addition, aaa authorization can be performed by Ray and not only GANYMEDE +. RADIUS is not too powerful and you can provide authorization command sets but you can always return roles and different levels of privilege.

  Have you tested the above configuration syntax? I did and it works as expected!

  Thank you for evaluating useful messages!

• Wrt1900acs nine installed today - peripheral unknown offline appearing in the network map

  Installed my new wrt1900acs today, began to connect devices, signed for the Smart Wifi Linksys. The network card correctly displays all connected devices, but there is a mystery device appear offline. I have used Parental controls to block access to this device until I can find more.

  How would a device appear? It should be linked at some point?  The new router has only been for 3-4 hours.  I connected only 2 laptops, a desk and a phone to iOS. Have not connected my non - iOS wifes phone still.  There are also 2 other routers and networks connected to the same Comcast modem.

  The mystery device is presented as "generic device" with only a name and a MAC address.  I was able to remove, but did not know if there was a simple explanation for it.

  Yes it should have been connected or on the network at any given time.

  Use the clear network adapter icon in the top-right corner of the user interface to allow the map to regenerate. I could take a few minutes.

• Microsoft Security Essentials Client Update Package - KB2754296 has not been installed due to a file epp.msi missing in the network directory, anyone have this problem?

  When automatic update trys to install a Security Essentials update, I get a message saying that the update has not been installed and that the epp.msi file cannot be found in the directory.  I tried to uninstall security essentials and start the uninstaller on but could not find the file epp.mis as well.  The file simply vaporize?

  In these forums, you will find some support for Microsoft Security Essentials (MSE): http://answers.microsoft.com/en-us/protect/forum/mse

  Additional references may include:

  Checklist for installation of Microsoft Security Essentials
  http://experts.Windows.com/w/experts_wiki/89.aspx

  Can I install Microsoft Security Essentials [or any other anti-virus/anti-spyware application] to clean my already infected computer?
  http://answers.Microsoft.com/thread/87058857-D181-4019-a723-efd9a49d9275

• Portege R700 - peripheral unknown in hardware

  Hello

  Win 7 Pro, after installation clean (I installed all the drivers Toshiba again), I have 2 unrecognized currencies left.

  1 a:
  AuthenTec Inc. AES1660
  Location: Port_ #0002.Hub_ #0003

  It works fine, but no driver is shown and it is not recognized by windows.
  Yes, I installed drivers for the fingerprint and Touchpad.

  2 a: unknown device
  Other devices
  on system compatible ACPI Microsoft
  The drivers for this device are not installed. (Code 28)

  Details: ACPI\TOS6205
  * TOS6205

  Any ideas? Thank you!

  The first should be fingerprint sensor and a second module BT. If you have installed BT stack installation activate BT (FN + F8) to complete the installation of the BT module.

  To be honest I n don't know what is wrong you but here's the Win7 installation order. All the things listed must be installed in this order:

  Win 7
  USB3.0 Driver 1.0.20.1
  Driver USB-Serial 1,00,000
  TOSHIBA Assist 4.00.00
  Security TOSHIBA Assist 2.0.8
  TOSHIBA Bulletin Board 1.6.08.0
  TOSHIBA ReelTime 1.6.06.0
  Infineon TPM software professional v3.60.2071.00
  SW 9.1.1.1024 Chipset installation utility
  Intel Management Engine Interface 6.00.40.1215
  Intel AMT 6.00.40.1215 software
  Driver Intel 8.15.10.2125
  Driver Intel Rapid Storage Technology 9.6.1.1001
  Realtek Audio Driver 6.0.1.6083
  Driver Intel LAN 14.8.3.6
  Synaptics Touch Pad Driver 15.0.12
  TOSHIBA value added package 1.3.12_64
  Ricoh 2.08.03.04 card reader
  Wireless LAN driver
  ConfigFree 8.0.30
  TOSHIBA Network Device ID registry setting tool 3.0.32.4 - 7
  TOSHIBA Fingerprint Utility 1.0.2.27
  TOSHIBA Web Camera Application V1.1.2.13
  3.1.3 TOSHIBA face recognition
  Bluetooth Stack for Windows by Toshiba
  TOSHIBA eco Utility 1.2.12.64
  TOSHIBA HDD_SSD 3.1.64.6 attention
  TOSHIBA HDD Protection 2.2.0.4
  TOSHIBA Service Station 2.1.40
  TOSHIBA PC Health Monitor 1.6.2.64
  TOSHIBA Sleep 1.4.1.3 utility
  TOSHIBA Disc Creator 2.1.0.2 for x 64
  TOSHIBA Media Controller 1.0.80.7
  TOSHIBA Media Controller plugin 1.0.5.10
  UPDATE2 PCIIDEREG - 1.1
  Update3 FixFPService_REG_1.0
  Update4 TosVolRegulator_x64_1.1

• Satellite A200-1The - peripheral unknown in Device Manager

  I have the suite listed under question marks in my device manager:

  ? Multimedia controller
  ? Network controller
  ? Unknown device

  I installed the sound and it works
  I installed the network card and it works

  What are the above devices?

  Stand by. Which operating system you are trying to configure?

  Have you checked on the Toshiba download section if the installations Instructions document is available? If you follow this document you will install everything you need and everything will be OK.
  Anyway, multimedia controller can be peripheral multicard reader, network controller is probably wireless card. I can't say what unknown device because I know not what drivers you have installed.

• ACS 5.1 - Ganymede + issue witch 'network access' access services

  Hello world

  can someone explain why Ganymede + cannot be used with the network access services?

  

  I know that Ganymede is mainly intended command authorization, but as I remember with ACS 4.2 it is possible. For example for the purpose of PPP.

  THX and regards

  Przemek

  GANYMEDE + applications cannot be managed by access with the Service Type «Peripheral Administration» services

  If the type is NetworkAccess, it will fail. Please check the Service Type defined for the Access Service 'VPM-access '.

• Install Win 2000 on Tecra S2 - peripheral unknown

  Hello

  I try to install win 2 k on my Tecra S2.
  I have download all the drivers and I have read the order of installation, but now I have an unknown PCI device.

  I try to check all devices such as:
  -Modem
  -Lan card
  -Wireless network card
  -Card bus
  -Audio

  etc etc (including the irda driver, mobile extension, power save the driver driver touchpad...)

  I also try to re install all the driver but I ' have already the unknown PCI, the only factor device that I have not installed is the Bluetooth.

  Please can someone help, please

  The only solution for you to find your way through this download one
  Freeware called "Unknown device identifier" of this site: http://www.zhangduo.com/udi.html

  This program will allow you to easily locate the correct device description as well as the
  pilot coresponding.

  Hope this will sort things

  Concerning

  chain

• Qosmio X 770-bar safety edge and peripheral unknown

  Hello

  a week after the purchase, I decided to replace the OEM Windows 7 Home Premium to Windows 7 Professional.
  (I am a student and I need the professional version). Everything works perfectly except the safety edge. With the Windows OEM, it worked fine, but still it no longer responds.

  When I open the Device Manager there is an unknown device. (Details: ACPI\TOS6205) I don't know what it is.

  I hope I explained my problem properly. English is not my mother tongue...

  Thank you

  Hello

  With edge, you mean the buttons illuminated on your laptop, right?
  Well for these buttons, you need to install Toshiba Value Package added that you can download from the Toshiba driver download page. This package contains drivers for the illuminated buttons, FN keys, etc. then you need to install it:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  ACPI\TOS6205 must be Bluetooth device then install the software portal BT BT:
  http://APS2.toshiba-tro.de/Bluetooth/

• Listed unknown network device

  Two unknown devices appear on my player network as 'EXPTRACKINGPC '.

  "

  These network devices are automatically added as part of the Windows Media Player sharing features? The first one above is protected by password and I can't access the file. I don't like sharing media through Windows Media Player, how can I get rid of them?... .or is that a hack program that somehow got installed despite my security measures that have been taken? I can't find anything on the web dealing with these devices. Thank you

  It looks like another computer on the network.  You could probably open a command and ping the PC name to see what IP address it has.  Perhaps even then go to your router and disconnect them from your network.

  Some ISP problems (configuration errors) can also make your neighbor computers appear in your network.

• Unknown network controller

  Only, I reformatted my HP laptop. Unfortunaly I did not write the driver information is now unable to connect to my wireless router. Actually my laptop does not recognize wireless networks.

  Device Manager indicates an unknown device, called network controller,

  Here is the hardware ID:

  PCI\VEN_14E4 & DEV_4727 & SUBSYS_145C103C & REV_01
  PCI\VEN_14E4 & DEV_4727 & SUBSYS_145C103C
  PCI\VEN_14E4 & DEV_4727 & CC_028000
  PCI\VEN_14E4 & DEV_4727 & CC_0280

  Product of my cell phone number is: XL279AV

  any advice or help would be great

  Hold on:

  Here is the version of Windows 7 x 64:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=1847703&swItem=ob-86003-1&mode=4&IDX=1

  Paul