Changing the IP address of the server running vCenter 2.5 U4 affects Update Manager Plugin

Similar Questions

• IOM server can be started without an administrator of the server running?

  We have configured a 11 GR 2 IOM in high availability environment, we set up two nodes and an administrator of the server, the server administrator is running on node 1, If this node fails for hardware problems, we risk not being able to start the node 2 If this does not work too. The question is: can be Server IOM be launched on node 2 without the administrator of the server running?

  
  

  Any help is appreciated.

  Thank you and best regards,

  You can start servers managed weblogic which is running IOM on even when the administrator of the server is down.

  Basically, once there is a managed instance has started successfully (IE with the connection to the server administrator), these details are cached locally to the managed server and it can use that starts when the administration server is not available. This type of startup is called MSI, see http://docs.oracle.com/cd/E28280_01/web.1111/e13708/failures.htm#START162

• How to change the unit cost of USD $ INR in vmware IT management.

  How to change the unit cost of USD $ INR in vmware IT management.

  in ITBM, console device itself will give you an option to change currency.

• How to change IP address of Agent connection on the server running?

  I have problem with the change of IP address of the agent as opensource Hyperic 4.0.2
  I changed the IP address of the agent system and after a reboot it show up on the dashboard for autodiscovery with note new IP address. I can open in Autodiscovery and click on 'OK '. So far so good. Can I browse the resources and find this platform and I'm taking the inventory. Now, it is not so good - I can see old IP address in 'properties Type and network '. I can add the new set IP address, mask of MAC manually and remove them manually the old IP address and it seems better. But the big problem is "Agent connection" field - it's still shows old IP agent. I run the query to change the IP address in the EAM_AGENT table for the corresponding id. It still shows the same old IP address in 'Agent connection' and it's drop-down list where I can't find the wiring is correct!
  Now, it's a way of communication - it seems that I get the measures defined previously, but I can't define new service to monitor. A quick test is to run live Exec 'df' command -, error message indicates that the server is trying to connect to the old IP address of the agent.
  I searched through all tables in database and it is not there. My guess is "cache". Is it possible to invalidate cache entries? Or hide it all?
  I restarted the Hyperic server, which is already bad in itself - why I have to restart the server if the broker IP address? This solved the problem with value of agent connection - now it shows the right IP address (it looked really as if it were in the cache), but it did not help too much. Now when I do ' live Exec - df "I get"unauthorized"error message. I have not deleted the directory of 'data' still on the side of the agent, but it seems a little too much work when the stockbroker IP address:
  -Restart agent
  -recognize the IP address change in the dashboard on HQ Server
  -to run the query to edit the EAM_AGENT table
  -(via user interface or through SQL query) remove old IP address manually and add a new IP address in the network platform properties
  -restart the server
  -delete data on the agent, and then restart the agent.
  
  Is there a better way to deal with it? I'm mainly looking for a workaround to restart the HQ server to change 'Agent connection. And blowing all directory data is not a good approach either - I have spent some time to add and configure the log files and services to monitor. If I understand correctly, it must be configured again.

  Hello

  normally execution of installation interactive on the Agent (HQ - agent.sh of installation) and recognizing changes in Autodiscover should suffice.

  Mirko

• Photosmart HP 6520: lost my photosmart 6520 by manually changing the server address

  Hello
  My printer is connected wireless and prints well by AirPrint and when I send it jobs by email, but after successfully scanning to e-mail several times it suddenly wouldn't connect to the Internet, which gives an error message. Tried to turn it works several times. Leva help on the forum and follow-up of boards to manually change the DNS server to 8.8.8.8 and 8.8.4.4 another server. This resulted in my losing access to my printer via his IP on my browser so I can't undo my actions and my printer always gives the error message when I ask him to scan to e-mail. All other functions work.
  Help, please. Thank you

  Hey @Kybosh,

  Welcome to the Forum from HP Support.

  I understand that you are having connectivity problems with your HP Photosmart e-all-in-one 6520, printer.  I want to help you with this.

  I'm surprised that a manual DNS has interfered with your setup - I think generally it does the opposite and enhances connectivity.  In any case, do not despair!   I have some suggestions that can restore the features of your printer.

  I recommend a fresh start by restoring the default settings of your printer to avoid any persistent configuration problem.  Here's how:

  • Front panel of the printer, press the key
  • Touch tools
  • Touch Restore Factory Defaults
  • * Note that this will reset your settings wireless and webservices.  If you have an address custom ePrint it is deleted permanently.  Click here for more information about setting up a custom address ePrint.

  With your restored default settings, continue on as indicated:

  • Touch the wireless icon ()
  • Run the Wireless Setup Wizard and reconnect to your network (SSID)
  • Enter the wireless password if prompted
  • Once you have created a wireless connectivity, reactivate your webservices/ePrint feature (essential for the use of scan to e-mail)
  • Tap the icon of webservices ()
  • Enable Web services and press OK to enable your printer will automatically update
  • Once completed, it will print a page of information.  If you are looking to complete an ePrint installation, it will be useful later - click here for more information.

  Now, if all goes well you can rebuild your Setup email scan:

  • Tap the scan icon
  • Tap the scan to E-mail
  • Enter your personal email address
  • Retrieve the PIN code of your Inbox
  • Enter the PIN on your requested to complete printer installation

  The above restore the functionality you were missing?

  Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem, feel free to give me a virtual h.o.t. by clicking on the 'Thumbs Up' icon below.

  Please post in the Forum of HP's Support and have a great day!

• Changing the server IP in an ASA 5505?

  Hi everyone, I know don't know anything about cisco devices. I just wanted to go on the spot. I recently did a job that has a configuration 5505 as the network gateway and a vpn for employees to work from home via the Cisco VPN remote client program. We had a main server which is the domain controller, dns, and dhcp. It was an old box 03, and I install a new 08 r2 on a different IP address box and all of the above functions migrated to it. Old server was a xxx.xxx.xxx.31, the new server xxx.xxx.xxx.6. I found the java (6.1) ASDM program and connected to the ASA, and I change.31 a.6 in as many places as I can find, however, vpn clients on the outside can connect is more to their workstations, because when I open a prompt on his computer, only IP they can ping is xxx.xxx.xxx.31, ping xxx.xxx.xxx.6, or any other address fails. I guess maybe it's in the firewall of the asa, but don't have really not ideal. At it no matter what else was I supposed to do? Somewhere I forgot? I did save for flash and reload the current, but not a physical power Reset Since I made the changes.

  Thank you.

  This new server (. 6), has he any windows firewall that might block incoming access? Well pls want to check on the server itself.

  If you can always test the old server (. 31), then the configuration on the SAA does not really much matter it has been configured to allow the subnet (192.168.0.0/24).

• Is there an impact on the database if we change the server time?

  Hello
  
  Our DB server time is 45 minutes before our application server. We have to reset the database server time. Is there an impact on the database if we change the synchronization of the server?
  
  Platform: Solaris
  DB version: 10.2.0.2.0
  
  bash $
  
  bash-3. $00 date
  
  Thu Apr 23 20:26:19 2009 IST
  
  bash-3. $00 sqlplus/nolog
  
  SQL * more: release 10.2.0.2.0 - Production on Thu Apr 23 20:27:15 2009
  Copyright (c) 1982, 2005, Oracle. All rights reserved.
  
  SQL > conn virtue sysdba
  
  Connected.
  
  SQL > select sysdate to double;
  
  SYSDATE
  ---------
  23 APRIL 09
  
  SQL > select systimestamp from double;
  
  SYSTIMESTAMP
  ---------------------------------------------------------------------------
  APRIL 23 09 08.27.53.250947 H + 05:30

  It's a matter of enforcement, not a question of Oracle.

  Oracle doesn't care what time it is, or when the weather changes. Your applications, however, can occupy. If you use SYSDATE to fill a line and depend on the date later to be unique or to indicate that the actual command lines have been inserted, changing the date on the server, in particular, he back off, could cause problems for your application. Your application has problems running when daylight saving time to save changes?

  Justin

• BlackBerry smartphone how to change the server password

  Hi, yesterday we changed the password on the server.  Since then, I have a couple of 9300 Blackberry's that no longer work.  I think I need to go to the blackberry and the change of the password but Im not sure what are the options that I have to go.  I trired options - device but I don't have the possibility to advance options, but do not have the option of advanced system settings.   Can someone help me were I can find the option for the mail server if I can change the password. I hope the above makes sense

  BIS is not able to interface directly with Exchange, but have to use OWA, IMAP or pop. However, see:

  • Article ID: KB05255 Associated e-mail account is no longer accessible by the BlackBerry Internet Service account

  Cause 3 may be what you need.

  Good luck and let us know!

• R12.2.4 cloning - failed to start the server, run oacore_server1 / oafm_server1

  Hi people,

  I am cloning EBS R12.2.4 for the first time. Database is in read/write mode. After clone then managed fs1. But while I was trying to services to run two services named (oacore_server1 and oafm_server1) not upward before clone, and ended with the error:

  ERROR: Could not start the managed server oacore_server1

  ERROR: Could not start the managed server oafm_server1

  Later, I tried to them manually, but the same results as the previous. I paste the details from the journal of oafm_server1.

  
  

  [Journal of the applmgr@abcddb] $ cat adoafmctl.txt

  07/26/15-00: 51:20: admanagedsrvctl.sh version 120.14.12020000.10

  Validated the arguments passed to the ebs-get-serverstatus option

  oafm_server1 is in STOP mode.

  Validated the arguments passed to the ebs-nmstart-managedsrv option

  The server oafm_server1 is not up. Procedure to start the server.

  Check if the Node Manager is already in place...

  Connection to the node Manager...

  Connected to the node Manager.

  The Node Manager is already in place.

  ERROR: Could not start the managed server oafm_server1

  26/07/01-15: 07:57: admanagedsrvctl.sh: exit status 1

  ================================================================================

  26/07/01-15: 19:04: admanagedsrvctl.sh version 120.14.12020000.10

  Validated the arguments passed to the ebs-get-serverstatus option

  oafm_server1 is in STOP mode.

  26/07/01-15: 20:48: admanagedsrvctl.sh: exit with status 0

  ================================================================================

  26/07/01-15: 21:12: admanagedsrvctl.sh version 120.14.12020000.10

  Call txkChkEBSDependecies.pl to make the dependency checks for oafm_server1

  Perl txkChkEBSDependecies.pl script has run successfully

  Validated the arguments passed to the ebs-get-serverstatus option

  oafm_server1 is in STOP mode.

  Validated the arguments passed to the ebs-nmstart-managedsrv option

  The server oafm_server1 is not up. Procedure to start the server.

  Check if the Node Manager is already in place...

  Connection to the node Manager...

  Connected to the node Manager.

  
  

  The Node Manager is already in place.

  ERROR: Could not start the managed server oafm_server1

  07/26/15-12: 49:18: admanagedsrvctl.sh: exit status 1

  ================================================================================

  Kind regards

  Ali

  Ali and Sandeep, follow these steps:

  starting at $ perl admanagedsrvctl.sh oafm_server1 - Dweblogic.security.allowCryptoJDefaultJCEVerification = true

  ARO

• Change the server time

  Hi all,
  
  I have 10.2 g database on a Windows Server 2003 in production.
  
  What would be the impact on the database if I change the time on the server, i.e. If I roll the clock back?
  My database server takes time to my DC server and I used to roll the clock back on the server to DC.
  
  Thank you!

  871486 wrote:
  Hi all,

  I have 10.2 g database on a Windows Server 2003 in production.

  What would be the impact on the database if I change the time on the server, i.e. If I roll the clock back?
  My database server takes time to my DC server and I used to roll the clock back on the server to DC.

  Thank you!

  Planners will be affected. I mean by planners; Oracle has defined planners (maintenance window, etc.) and user-defined planners.

• How to change the server session time out?

  Hello

  When I start writing a file of more than about 2 MB of files using Java APIs writeResource(). My application upward changes and he says that the server time is out by throwing Exception...

  But I don't face any problem when writing to a file of about 1 MB.

  Can you tell me how set\increase the server time of the configurations.

  Concerning

  Sunil Gupta

  You should have write access to the jboss installation folder to change this settings.

  for example, if the Jboss installed on a computer, the connection in the machine and locate the following file:

  for example c:\Adobe\Adobe LiveCycle ES2\jboss\server\all\deploy\jboss-web.deployer\server.xml

  The path is just for your reference; Contact your system administrator for the exact location of this file.

  Look for the sessionTimeout and change/increase in the value attribute.

  It is clear now?

  Nith

• After the server running for a period of time, get connection errors

  Hi all
  
  We meet a few serious problems during the performance tests.
  Its does not occur with WebLogic 10.3 and does not occur with connections of type oracle.jdbc.driver.OracleConnection.
  
  After the test, the server fills up with the following exceptions...
  
  < 9 October 2009 15:34:17 IST > < WARNING > < JDBC > < BEA-001129 > < receipt exception creating connection to pool ' jdbc/sdoPool': IO exception: the network adapter could not establish the connection >
  
  
  Here is the configuration of the jdbc/sdoPool:
  Driver class name: oracle.jdbc.OracleDriver
  -> Properties
  user = SOL_ISMART_USER
  Class = Oracle.JDBC.pool.OracleConnectionCacheImpl
  Protocol = thin
  Initial capacity: 1
  Maximum capacity: 100
  Capacity: 1
  Delete the infected connections
  
  
  
  Code to get the connection...
  DataSource data source = null;
  
  VR;
  {
  dataSource = (DataSource) ctxt.lookup ("java: comp/env/jdbc /"+ poolName ");
  }
  catch (NamingException only)
  {
  dataSource = (DataSource) ctxt.lookup (poolName);
  }
  
  Connection Conn = dataSource.getConnection ();
  
  OracleConnection vendorConn = (OracleConnection) ((WLConnection) conn) .getVendorConnection ();
  
  vendorConn.setClientData ("LOGICAL_CONNECTION", conn);
  
  Return vendorConn;
  
  
  Here is my code to close the connection...
  If (con instanceof OracleConnection)
  {
  If (((OracleConnection) con), .getClientData (C_LOGICAL_CONNECTION)! = null)
  {
  Connection logicalCon = (connection) (con (OracleConnection)) .getClientData (C_LOGICAL_CONNECTION);
  
  connection - defense against leaks of output connection
  (Con (OracleConnection)) .setClientData (C_LOGICAL_CONNECTION, new Object();)
  
  logicalCon.close ();
  logicalCon = null;
  
  con = null;
  }
  on the other
  {
  con = null;
  }
  }
  on the other
  {
  If (! con.isClosed ())
  {
  con. Close;
  }
  }
  
  
  
  Any advice / help greatly appreciated.
  
  Ronan

  The DBMS does not give new WebLogic connections when running. Try to set
  the initial capacity of the pool to 35 and the login delay to 1, so the pool
  makes 35 connections at startup, one at a time, with a delay of 1 second
  between each of them. (The DBMS can sometimes get overloaded if it becomes too
  connection requests in a short period of time and don't miss some people).

• Can I change the server port, but Windows Mail continues to change at 25

  I can get my outgoing mail working by changing the port from 25 to 587, but whenever I close the Windows Mail application and re-open it, it comes back to port 25 (and will not work). Thanks for the help!

  You should always back up when you use a Microsoft product.  Your hard drive may die too.  But deleting the e-mail account does not delete messages, and repair the database will not ruin it.  I have not had one person complaining about this program (WMUtil) except for one person who said their antivirus software falsely reported that the file is infected (it was not).

  Steve

• Task Scheduler error 2147944309 when I change the task ' Run only when the user connects ' to 'use execute is connected or not' _

  I have a simple task (cmd batch file). Whenever I try to change the settings, I get a dialog box that reads as follows:

  "An error has occurred for task RemoteBk. Error message: the following error is reported: 2147944309 ".

  My computer is on a domain.

  Someone in another forum explained the error:

  0n2147944309 = 0 x 80070775

  Installation: 8007 = Win32 (it's a status code "Win32")

  Status: 0 x 775 = 0n1909

  Q:\>net helpmsg 1909
  The referenced account is currently locked and cannot be logged on to.

  Hope, it may be useful to others.

• Changing the server publishing point Mobile

  Hello
  
  A question:
  
  We have added fields in a table in the repository.
  
  For these fields are downloaded on the client:
  
  Is it necessary to drop and re-create the publication element?
  
  or
  
  It would suffice to change the element of 'request' for the publication?
  
  Greetings

  Hello
  I usually follow the number following and found issues.
  IM using MDW

  1. first remove the item from publication to publication
  2 remove the repository publication point
  3 publishing point with a new query to recreate
  4. Add to the publication
  5 reset the repository mobileserver
  6. it should be ok for most customers. But if any issue I reset the client setting in MDW for a specific user and it's a complete customer required not refresh for all.

  Paninie.