Changing the locale setting on the printer

Similar Questions

• HP 2050 j510 series change the print quality options all greyed out help? Project custom quality etc.

  Hi I just installed this printer on an operating system of Windows 7 32 bit, but on the quality of implementation page/impression of two tabs only page layout can be changed all options are greyed out it is deliberate to stop printing in draft print quality or quality options above that this has no sense here that I hadn't bought this printer now as she gobbles up ink and I can't change the print quality at first, I was disappointed that now I would never never buy another printer HP unless HP or someone can help you. Printer is brand new, right out of the box, but HP only support expensive paid as it has been manufactured since more than a year! How bad are only only he registered today for the first time!  Thumbs down for HP!

  Hi charlieelston,

  Follow the instructions below.

  1. open devices and printer

  2. click on add a printer

  3. click Add a local printer

  4. from the use existing port, select the USB option and then click Next

  5. click the button of Windows Update to get all the support window 7 drivers updated

  6. once the update is complete. Click HP from the menu on the left, then select the printer Deskjet 990c in the right menu, and then click Next.

  7. follow the remaining instructions to complete the installation.

  Once you have the printer added 990c make sure it is the default printer, and then try to print using this driver for the Deskjet 3050 printer. I would like to know if you have the same problem?

• print size too large after changing the print cartridge

  Sounds like an easy fix should be up there, but I'm not super computer savvy... after that we changed the print cartridge for the first time with this printer (and who knows what may happen after when my husband tried to fix it), the font of printing is too large AND prints a blank page of paper before the actual page prints with a font that is too large to fit properly on paper 8.5 x 11 inches. Normally, there are all the parameters that must be set after simply change an ink cartridge? Help!

  Hi Wendy,.

  You can also check: http://h10025.www1.hp.com/ewfrf/wc/manualCategory?lc=en&dlc=en&cc=au&lang=en&product=4089468&

  I hope this helps.

• Is it possible to change the printer function to accommodate the thicker paper

  Need to print on thicker card, but the paper is a little too think to roll smoothly through the printer.

  Anyone know if there is a way to change the printing options to solve this problem?

  This would be a limitation of the printer, so I suggest to contact the printer manufacturer for advice. My suspicion is that it will take another printer.

  -steve

• How can I change the print in grayscale settings?

  How can I change the printer (3050 J611) of colour printing for printing in grayscale print fast by default?

  soaprhm wrote:

  How can I change the printer (3050 J611) of colour printing for printing in grayscale print fast by default?

  What operating system?  For Windows 7, you would go to start, devices and printers, right click on the HP Deskjet 3050, printing preferences, select the paper/quality tab and some Plain paper media quick project, apply, then click on the Advanced tab and under the characteristics of the printer, select printing in levels of gray and black ink only, apply, OK.

  

• Can I hide or change the print window not pop up when printing?

  Original title: hide or print shown window?

  Can I hide or change the print window not pop up when printing? I want to still print but just to hide so it does not appear.
  Is it still possible?
  Thanks for all help

  Hi rustylzard,

  It is not possible to hide or change the print window when you try to print something.

  Hope the helps of information.

• I can't change the printing on PSC2175 preferences. When I click on Preferences nothing happens.

  I can't change the printing on my HP PSC2175 preferences. When I click on it, a window will appear, and then disappers instantly. May not print correctly (using Microsoft Office 2010) Word documents or PDF documents correctly. It can print text perfectly, but diagrams, text boxes and grids do not print, and other times it prints only part of it.  I am using Windows 7 32 bit.  It started after the upgrade to Vista.

  Hello

  Have you tried to uninstall and reinstall your driver located within the Windows 7 operating system?  You probably know that HP did not create a downloadable driver for Windows 7.  I would try uninstalling and then reinstalling the driver.

• How to open the maintenance Manager to change the printer ink

  How to open the maintenance Manager to change the printer ink

  Do you mean physically change the ink cartridge?

  I would check with the manual that came with your printer.

• Change the printing WillPrint settings

  I see that the WillPrint event is raised after the user dismisses the dialog box print. I have a PDF file where I want to only allow them to print page 1. Can I use the WillPrint event and change the print settings as well as the first page is printed? Thank you very much.

  Rick

  As try67 says, the event does not work like that.

  WillPrint is exactly like that - he is fired when the user presses the Print button in the print dialog box, so at this time the printout will be no matter what you do with the event. and they have already made their choice on what is happening out of the paper tray. If JavaScript could intercept these choices it caused no end of problems.

• How to remove a local printer port, or change the printer driver associated with the port

  I added a printer local port \\MACHINENAME\PRINTERNAME to respond to a printer that is connected to an XP machine on my home network.  There is no driver for my printer (HP OfficeJet v.40 or V-series), so I tried to install it with the Officejet D series.  Well, the test page did not work.  I deleted the printer via the Control Panel, but apparently the local port does not remove. I can't add the printer again, I can't delete it, and I can't change the driver.  So I'm stuck.
  Thank you, Charlie

  Stop and start the print spooler service if you still hit a question

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• Color LaserJet CP1025nw, unable to change the print density

  Hello

  I need to raise the "print density" 5 (for pcb toner transfer) on my Laserjet
  Color CP1025nw, but when I open the properties of the printer I don't have this option
  on the device settings tab, despite what is said on the page using this model.

  OS: Windows XP
  The printer is on the USB port.
  The driver is: HP LaserJet Professional Series CP1020 + update

  How can I change this setting?

  Help, please!
  Thank you in advance for any help you can make!

  All the best,

  Hi Spencer,.

  Fine forecast here too, but only 65 F, which is above normal for this time of year.

  I finally installed a wireless router to access the printer and BINGO!, all the density settings are

  available via the integrated Web server.

  Thank you again so much for the advice for beginners I

  All the best,

  Benoit

• How can I change the print quality of 72 dpi and 300 dpi?

  When I try to print the image from my library on my printer fate at very low resolution. There is nothing wong with the printer - if I use another program to print the results are perfect. How can I change the resolution settings in Windows 7?

  Hello Robin,.

  Although some applications allow you to change the settings for printing (as parameters of the screen), print quality is generally a function of the properties of the printer. Go to the Control Panel, select devices and printers, then select the printer in question. Right-click on the printer, select Properties, and then look for quality printing or the DPI settings page to change the resolution of your default printer. Once the resolution was increased, Windows will display the new default setting.

  Let me know if this solves the problem for you.

  Kind regards

  BearPup

• Cannot change the print settings

  I have a new printer, an Epson XP 430. My previous printer was also an Epson. With my old printer, when I chose to print (for a document, web page, etc.) the dialog always had an option to choose, black and white. I also could add to the presets and edit presets.

  With this printer, I can see the presets, but I can't make changes. When I click on view Presets, it is not an option for adding a new preset as it was with my old printer and remove and duplicate boxes are grayed out.

  I guess that this is due to the printer, not OS X, as I noticed the difference when I started using the new printer. Am I missing something somewhere? I rarely print in color, so I would have a preset that specifies black & white.

  Thank you.

  Sheri

  Since you have a new printer, you can create new presets. This is done through the printer with the selected printer dialog box, not through the page view Presets. When you select this option to print do the settings that you want to create a preset for and then click on the drop down preset menu. Select "Save current settings as preset" and enter a name for the new preset.

• Change the printer to an email you have already created on connected HP?

  Whenever I re - install the drivers / software for my 7510 Photosmart all-in-one, as the time where to find a new PC or reinstall Windows, I have to go into HP connected on the web and 'add a device '. After that, it makes you choose an email address to assign to your printer. From what I see, you cannot use a printer e-mail address that you already created.  And you cannot go back connected HP and change the email of your printer that you already created - it gives you a "taking" error (Well, of course it is taken - by me!)

  See picture attached for clarification.

  Of course, I tried to submit a request for assistance and sent an e-mail after that my product is out of warranty, I knew, but connected HP is relatively new and this seems to be a bug, unless I'm missing something.

  Thanks for any info, someone has.

  

  Sorry, found my response on another thread - except connected HP is referred to as ePrint...

  Could not find a way to remove this post.

• HP Officejet 4500 crashes when you click Properties to change the print quality

  There is no answer to a minute when I want to change my print job properties after clicking on the properties button. I haven't changed anything concerned with the printer, what the problem and how can I solve it?

  beckybeib,

  Also, make sure that you do NOT connect the USB cable until the software tells you to connect, when you reinstall the software.

• script to change the print queues for use on Server 2003 winprint print processor

  Need to change the winprint print processor to 2003 Server backup and restore on Server 2008.  Was hoping to use a script to do

  Hi Randy,

  You can ask your question in the TechNet Windows Server Forums: http://social.technet.microsoft.com/Forums/windowsserver/en-us/home?category=windowsserver

  Thank you.