changing the location of the log archiving PLZ flash recovery area HELP!
Hi allMy journal archive is stored in an area of memory flash that got the full and the production server is down.
Details of the alerts log file...
ORA-19809: limit exceeded for recovery files
ORA-19804: cannot reclaim 43432960 bytes disk space from 2147483648 limit
*** 2010-04-25 14:22:49.777 62692 kcrr.c
ARCH: Error 19809 Creating archive log file to
'/oracle/product/10.2.0/flash_rec
overy_area/EDWREP/archivelog/2010_04_25/o1_mf_1_232_%u_.arc'
*** 2010-04-25 14:22:49.777 60970 kcrr.c
kcrrfail: dest:10 err:19809 force:0 blast:1
I deleted the files and started the database,Can a good person kindly tell me how to avoid this problem in the future by keeping the destination of the newspaper archive in the flash recovery area.
I want to change the location of the files to archive log, can someone ' a please guide me about hiow to do
I changed the size of the area of recovery flash for now, but I fear that it will be again!
SQL> select * from v$flash_recovery_area_usage;
FILE_TYPE PERCENT_SPACE_USED PERCENT_SPACE_RECLAIMABLE NUMBER_OF_FILES
------------ ------------------ ------------------------- ---------------
CONTROLFILE 0 0 0
ONLINELOG 0 0 0
ARCHIVELOG 99.44 0 57
BACKUPPIECE 0 0 0
IMAGECOPY 0 0 0
FLASHBACKLOG 0 0 0
6 rows selected.
SQL> alter system set DB_RECOVERY_FILE_DEST_SIZE = 4G ;
System altered.
SQL> select * from v$flash_recovery_area_usage;
FILE_TYPE PERCENT_SPACE_USED PERCENT_SPACE_RECLAIMABLE NUMBER_OF_FILES
------------ ------------------ ------------------------- ---------------
CONTROLFILE 0 0 0
ONLINELOG 0 0 0
ARCHIVELOG 49.72 0 57
BACKUPPIECE 0 0 0
IMAGECOPY 0 0 0
FLASHBACKLOG 0 0 0
6 rows selected.
Kind regardsPublished by: user10243788 on April 25, 2010 06:12
following steps should be ok
(1) create pfile from spfile;
(2) remove the unnecessary params
(3) configure log_archive_dest_1
Note: do not remove the db_recovery_file_dest, db_recovery_file_dest_size, and parameters. they may be required at another time
(4) stop and start your database using this new pfile
(5) check if the archives are in one place
(6) create spfile and bounce database to ensure that it uses spfile
Please try all the steps test env first and go ahead in the event of success, to production
Tags: Database
Similar Questions
-
When I scroll a certain Web page, browser reloads the page upward, this happens even if I change the browser... Why? Help, please!
-
When I open the files they are always displayed as a default icons, I would like to change the default setting so my files are displayed as a LIST. How to change this default setting.
Hello combat
Open Windows Explorer/Tools/Folder OptionsOn the general tab, click the options you want.
In the view tab, click the options you want.
On the view tab, click apply to all folders.
Click Yes, then OK
. -
I can't change the creative cloud to ENGLISH, there are Chinese, please help
I can't change the creative cloud to ENGLISH, there are Chinese, please help
-
How can I change the Version Code in Flash Android from the Android market app settings?
I recently tried to update my app on the Android app market and when I downloaded it I got the following message:
"News of the apk (1000000) VersionCode already exists."
In Flash Adnroid settings I changed the version label, but that did not help.
So I have two questions:
- How can I change the Version code in Flash Android settings? I changed the version number and the version label, but it does not work.
- What is the difference between the version number and version label?
1.1.0 That should fix it, you must download the wrong file. I got this error before, by simply changing the flash version number and reexporting solves the problem. Flash can sometimes reroute your destination the exit .apk file folder, when your double apk download check that it has been created when you think it is, best way to do so is to publish and then transfer it, and after download be sure that it has been created a minute ago or so not on 30 March. Also try without the version label, it would be in conflict with something.
-
in the life situation, is the flash recovery area used often?
Hi all
in the life situation, is the flash recovery area used often? or being extinguished?
What is general practice?
Thank you
AndrewAndrew,
First that you must answer - what you want to with flash recovery area (FRA). FRA may or may not be used with another technology - flashback database.
(i) are you using a base of data of flashback (database +, not table or query flashback flashback), i.e. you have lit the flame of the database? If so, you need to use CRF because that's where the FB connect to go.
(ii) If you don't use flashback database, you can, but you don't need to use FRA. FRA can be used for database backups and archived logs archived backups of logs.
I strongly suggest not to use FRA for archived logs. As a corollary, I strongly suggest backups seprating and newspapers archived on separate file systems (and underlying disks), if possible. Don't forget, you can always re-create a lost backup using logs archived. but never an archived newspaper lost. If you have lost journal #345, but all the others to have #346-#1000, it doesn't matter; recovery stops at 345. So imagine put backups and newspapers archived on a single point of failure - you lost two of them.
Therefore, I use different locations for backups and archived logs, somewhat defeat the purpose of the FRA, where both are supposed to go.
Caveat: I do this for all important databases. If a database is not so important, well...
I hope this helps.
Arup
-
Remove the Flash recovery area
Hello
IAM on oracle 11.2.0.1 on windows 2008 64-bit. We have a database with the recovery flash set up in her area. We want to delete (IE completely remove the flash recovery area without affecting the DB). So, what should I do? I can find one of my files to control it. I want to completely remove the flash recovery area so that my data files and files redo, control files can be on the same location. Thanks in advance.Hello
In addition to having a control file in the flash recovery area, which is strange, not desired, I wonder if you have covered Google for the answer: http://www.lmgtfy.com/?q=oracle%20remove%20flash%20recovery%20area
Transfer the control file to another location means a change in the spfile and restart the database.
For the rest, refer to the manuals
Success
FJFranken -
management of the Windows flash recovery area
Hi experts,
We use oracle 10G R2, enterprise edition on windows 2003 Advanced Server...
We have a size 20 GB database with archive log mode and archiving destination specified to Flash the recovery area. We don't use RMAN as a backup strategy. and are flash recovery size is set to 5 GB. as it is an OLTP system, it generates a lot of log archiving in the flash recovery area, order of frequent newspaper with the redo log file size is 100 MB.
I would like to know, how can I manage the flash recovery area, if I do not use RMAN to specify archivelog retention policy? How can I specify that oracle should keep log archive files to flash recovery are for 5 days? as we know that oracle won't remove any permanent file at least flash recovery area that it is obsolete, and database may hang if there is space in recovery is full... I can take the log backup archive to another disk, but is it possible to say oracle keeps log archiving for 5 days and remove them to recover space in case of disk space full for the flash area?
or if I put the retention using RMAN policy, it will take effect for maintain the retention policy and remove the log archiving obsolete in the area of flash recovery after 5 days, even if I do not use RMAN to back up my database?
any suggestions would be much appreciated
Thanks and greetings
VDVikrant dixit says:
We use import export for backup of database (political company it's not mine)Then suggest or explain this imp/exp is not any type of backup. It's a data dump. And it won't save disaster. There will be data loss. If it's good to society, then it's ok.
And then perhaps it is not necessary to keep the database in log mode archive if exp/imp is used... .and archive logs are generated and not backed up yet... that's why I asked this question here how manage space flash in a future close if space is complete in the same...
Then, you must implement the log backup archive and deletion with rman. And if already happens with rman, then why not go further and use rman for full database backups.
What you need to do:
1 understand how often do you need to archive backup logs
2. When you save them (tape, disk)
3. making scripts to archive log backup or remove and obsolete backup deletion.
It may be just a script
delete any backup archivelog entry;
remove obsolete;Look here for more details on orders:
http://youngcow.NET/doc/Oracle10g/backup.102/b14192/Bkup.htm#g1050005 -
Add redo log Member Flash recovery area
I have an Oracle 10 g server.
Database is in archivelog mode, using the Flash recovery for storage area redo files archive.
He doesn't use Oracle-managed files (db_create_file_dest is not set) - all the examples use until this OMF to multiplex the redo and control FRA files.
Is is possible to multiplex files redo log to the flash recovery area? Same question for the file control also.
What I tried, but not successfully:
My FRA is set to C:\ORACLE\PRODUCT\10.2.0FLASH_RECOVERY_AREA\ALEQ.
I added a redo log Member
C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\ALEQ\ONLINELOG\
The problem is through EM I can't see any use of "Online Journal", but also when I query V$ FLASH_RECOVERY_AREA_USAGE (now I see only the use of archivelog and backuppiece)
My assumption is that the FRA is not used.
Thanks in advance.Yes, if you create base without specifying CONTROL_FILES but whose value DB_CREATE_FILE_DEST and DB_RECOVERY_FILE_DEST, then your controlfiles get automatically appointed duplex and OMF. You could do this later with a create controlfile statement. But a more simple and better method would be to use the two parameters from the start.
Kind regards
Uwehttp://uhesse.WordPress.com
-
change the location of the log archive
Hello
DB is 9.2.0.7
Operating system is HP - UX 11.23
Log_archive_dest = archivelogs/backup /.
This site is located on a single hard drive.
When this disc goes down, database stops. Need to change the location to another drive online.
I have a procedure to follow
SQL > change the start of the archive log system of ' < nouvel_emplacement >;
Once the disc problem is resolved.
back from the old location.
-----
what you guys think... any other procedure
Note: I'm just asking questions about my practical purpose. in practice, we will put the location of the newspaper archive in the mirrored partition or archive 2 destinations.oradba2,
You're still using log_archive_dest. You are running Enterprise or Standard?
When you run Enterprise, you must use log_archive_dest_1, log_archive_dest_2 etc.And you must archive log start!
Just alter system set log_archive_dest (_) will do the trick. --------
Sybrand Bakker
Senior Oracle DBA -
How do I change the log mode archive in 12 c
Hello
[oracle@localhost Desktop] $ rman
Recovery Manager: release 12.1.0.2.0 - Production on Mon May 4 00:38:33 2015
Copyright (c) 1982, 2014, Oracle and/or its affiliates. All rights reserved.
RMAN > Connect target sys/oracle@cdb1
connected to target database: CDB1 (DBID = 828012650)
RMAN > backup database;
From backup may 4, 15
using the control file of the target instead of recovery catalog database
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID = 284 type device = DISK
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of the backup command at 04/05/2015 00:38:51
RMAN-06149: cannot BACKUP of DATABASE in NOARCHIVELOG mode
RMAN > exit
Complete recovery manager.
[oracle@localhost Desktop] $ sqlplus
SQL * more: Production release 12.1.0.2.0 on Mon May 4 00:38:57 2015
Copyright (c) 1982, 2014, Oracle. All rights reserved.
Enter the user name: sys as sysdba
Enter the password:
Connected to:
Database Oracle 12 c Enterprise Edition Release 12.1.0.2.0 - 64 bit Production
With the options of partitioning, OLAP, advanced analytics and Real Application Testing
SQL > shutdown immediate;
Connectable to closed database.
SQL > startup nomount;
SQL > startup;
Connectable to open database.
SQL >
Please tell me how to change the mode of journal archive in db oracle 12.1.0.2.0
Please tell me how to change the mode of journal archive in db oracle 12.1.0.2.0
Please mark the thread ANSWERED and repost it in the forum shared.
Before you repost again the "Archiving for control" secion of the Oracle documentation
http://docs.Oracle.com/database/121/Admin/archredo.htm#i1006208
Archiving control
This section describes how to set the mode of the database archiving and control the archiving process. The authors discuss the following topics:
This article shows you step by step how to change the mode of journal archive.
-
How can I change the logging settings in Vista Home Premium?
I was in the management of the computer and discovered a few troubling record, such as how he was following my use of the office. Worse, I couldn't find no way to enable or disable the newspapers, as the procedures I used XP Pro and 2K 3 server did not work.
How can I disable logging of my use of Microsoft office, so that change the other settings for logging in Event Viewer? I had a class on the audit for XP & Server and I had to sometimes see newspapers located in a business environment (never had to do anything with Vista or 7 well) so I have a good idea of what to leave past generations of operating systems. How do I change however logging in Vista Home Premium? I can't access "local security policy" in my version of Vista.
SlickRCBD salvation,
There is no way to disable the use of Microsoft office in the event viewer.
However if you want you can completely turn off event viewer of logging of all events performed on the computer by disabling the service on the computer Windows event log.
(a) click on the start menu, type services.msc in the search box and press ENTER.
(b) click on services in the list now locate the Windows event log service
(c) right-click on the service and click on disable
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
If it is Possible to change the log for Exchange 2010 running on Esxi 5 drive
Dear Experts,
We are running exchange 2010 on Esxi 5, this Exchange 2010 has recently been installed and all the mailboxes have been transferred from exchange 2003 which was a physical server. At the time of migration in exchange 2010 we created newspapers drive 100 GB since big newspapers vmdk is generated when you migrate the mailboxes. As now migration is performed a few months back and now I observed for 2/3 weeks, the behavior of the reader of newspapers for a week only 5 GB is consumed in disk vmdk of newspapers, and that is also supplemented with a backup complete weekly to Exchange.
I intend to ask, is that I think have newspaper vmdk 30GB instead of 100 GB, so the current of 100 GB of log reader, I can't reduce, but yes, I can create vdisk another to swap, but need advice if anyone has a similar experience to change the disk vmdk of newspapers for the Exchange? With this approach, I try to save 70 GB of storage space.
I hope my question is clear.
Waiting for your answers with the thoughts.
Thank you
Yes, you must stop the Exchange Services. But Exchange 2010 has a nice Wizard to do this, who can stop the database services, newspapers move automatically and back up the database.
It is located under the Organization-> mailbox
Leave the database, but only to change the path of the log file.
-
Removal of the log archiving using RMAN Target in Oracle 10 g
Hi all
Recently, I noticed that archive logs have been 102 GBs out of the car and I need to free up space. When I tried to connect using the RMAN catalog
I got error message likeconnect catalog user@db
But I could get through the useRMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-06445: cannot connect to recovery catalog after NOCATALOG has been used
My query is that I can useconnect target user@db
as shown in [how to remove the log file archive | https://forums.oracle.com/forums/thread.jspa?threadID=2321257 & start = 0 & tstart = 0]RMAN> delete noprompt expired archivelog all;
Or I'll take another approach to remove obsolete archive logs?
Kind regards
* 009 *.Hello;
Recently, I noticed that archive logs have been 102 GBs out of the car and I need to free up space. When I tried to connect using the RMAN catalog
connect catalog user@db
I got error message like
RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-06445: cannot connect to recovery catalog after NOCATALOG has been used
But I could get through the use
connect target user@db
Are you trying to connect through Grid control? If you connect via a script, then please post its content.
Make sure that you are not connected to the database target using "nocatalog.rman target sys/
@ catalog / @ My query is that I can use
RMAN> delete noprompt expired archivelog all;
as shown in [how to remove the log file archive | https://forums.Oracle.com/forums/thread.jspa?threadID=2321257&Start=0&tstart=0]
Or I'll take another approach to remove obsolete archive logs?Kind regards
* 009 *.These archives are saved? The command above does not update the RMAN Repository if in case, the archives have been manually delete at the OS level.
I recommend you save these records and then remove them.RMAN>backup archivelog all not backedup 1 times delete input;
If these archives are already saved and were not deleted from the disk, then you can use the below command
RMAN>delete force noprompt archivelog all completed before 'SYSDATE-n';
where "n" is the number of days of delay on the current date. Be sure to check if these archives have been saved before deleting.
Kind regards
Shivananda -
change the log file of size hyperion shared services
Hello Experts,
I´d want to change (decrase) the size of the sharedservices_security.log.
There are always 5 files sharedservices_security.log + sharedservices_security.log.2 - sharedservices_security.log.5 (file size is 51 201 kb).
How can I change the size of sharedservices_security.log?
We have EMP 11.1.1.3 (Essbase / HFM / planning) on WINServer2003.
Thank you very much
Concerning
KFORTake a look at
\deployments\ \SharedServices9\config\HSSLogger.properties
Look at the MaxFileSize setting for each log.
Restart the web application if you make changesSee you soon
John
http://John-Goodwin.blogspot.com/
Maybe you are looking for
-
Auto unblocking does not connect to Apple Watch
Mac OS can not the Apple Watch checked all setting and still does not... its a pain in the tip of the ideas of troubleshooting?
-
On my Firefox page there is no menu history in the "three vertical dash" button on the upper right corner of my Firefox page. What happened to him? The things that I am saying go to the button and click history, who's not here.
-
Windows Vista to Windows 7 upgrade results in annoying message every time I reboot.
Results in annoying message whenever I start "Microsoft .net Framework on 2.0 is required to continue." Windows Vista upgrade to Windows 7 when I try to download from the MS site, get a message that says that this is not the version for my 64-bit mac
-
Any idea when they will solve the problem of incorrect password for hotfixes?
-
HP ENVY 17-j061ss Notebook PC: 2 missing drivers
I have 2 missing drivers for unknown devices 1 ACPI\VEN_HPQ & DEV_6007 2 ACPI\VEN_INT & DEV_33A0 Thanks for your help