Changing the setting in the RAC one node
I want to change the log_buffer following in the CCR cluster with two nodes.change the log_buffer set system is 5242880 scope = spfile;.
To ensure availability, how the command can be issued on each node to avoid any interruption of the two nodes. Ways, reflecting the change in a node first do it after completing the tasks, the same thing on another node.
Thank you.
When fatim to another all the Please read the manual Fine sub
change the system
in particular the
SID =
qualifier
Please keep your questions doc out of this forum in the future.
---------
Sybrand Bakker
Senior Oracle DBA
Tags: Database
Similar Questions
-
I can create instances of the RAC one node so I have this option, Oracle RAC?
Hello
If you have the license Oracle RAC, it seems that you can use even for RAC one (it will be unavailable for himself).
According to the document. 220970.1
--> Assuming that the existing ELA/ULA includes Oracle RAC. The guide to licence stipulates that all licenses option Oracle RAC (no SE RAC) include all the features of Oracle RAC one node
At the same time, you may need to know information...
A CCR node is not available in SE.
for EA, cost of a CCR node will be very less than option CARS, but if you have the license BECAUSE you can use a node of RAC, but not in the opposite lane
https://docs.Oracle.com/CD/E11882_01/license.112/e47877.PDF
You can also check 2078285.1
Thank you
-
Hi all, I have a question I hope someone can help me.
We must apply Oracle RAC a node, but when I install the software of oracle 11.2.0.3 database I see two options: Oracle RAC one node and Oracle RAC, so I understand that I must select a node Oracle RAC but and also I know I can convert the RAC one node to RAC my database. But my question is what that different I have to choose RAC node or CARS in the form of installation for example other executable, etc, because I want to be sure that I won't have problems in the future. Thank youA knot of CARS is something different with a different license than CARS. Install to that you have a license.
-
Is possible to change the type of node WINS with cmd command on a windows operating system that is not joined to the domain?
HelloThe question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.
Hope this information is useful.
-
FRA on NFS Oracle RAC one node
Hi all
We have installed Oracle RAC one node on Oracle Linux. Everything seems to work fine except one small thing: we try to change the database in archivelog mode, but when we try to move the database, we get ORA-19816 "WARNING: files may exist in... that are not known to the database." and "Linux-x86_64 error: 37: no available lock.
The FRA is mounted as NFS share with the following options: "rw, bg, hard, nointr, rsize is 32768, wsize = 32768, proto = tcp, noac, worms = 3, suid.
I searched a lot on the Internet but couldn't find any hint. Can someone point me to the right installation guide?
Thanks in advanceHello
user10191672 wrote:
Hi allWe have installed Oracle RAC one node on Oracle Linux. Everything seems to work fine except one small thing: we try to change the database in archivelog mode, but when we try to move the database, we get ORA-19816 "WARNING: files may exist in... that are not known to the database." and "Linux-x86_64 error: 37: no available lock.
The FRA is mounted as NFS share with the following options: "rw, bg, hard, nointr, rsize is 32768, wsize = 32768, proto = tcp, noac, worms = 3, suid.
I searched a lot on the Internet but couldn't find any hint. Can someone point me to the right installation guide?
Check if service NFSLOCK works... and if not start it.
# service nfslock status
* Mounting for Oracle files options when used with NAS [359515.1 ID] devices *.
Mounting for Oracle data files optionsrw,bg,hard,nointr,rsize=32768, wsize=32768,tcp,actimeo=0, vers=3,timeo=600
For games of backups RMAN, copies images and Data Pump dump files, the "NOAC" mount option should not be specified - it's because RMAN and Data Pump do not check this option and specifying this can adversely affect performance.
The following NFS options must be specified for 11.2.0.2 disc RMAN backup directory:
opts="-fstype=nfs,rsize=65536,wsize=65536,hard,actime=0,intr,nodev,nosuid"
Hope this helps,
Levi PereiraPublished by: Levi Pereira on August 18, 2011 13:20
-
Hello
What is really the advantage and the difference between the RAC and RAC one node, because finally we should move to another server if an instance/node goes down.
On advice of Burleson Consulting it is said:
What makes the Oracle RAC a special knot is that it performs a quick clone of the instance to a new node.
Which for me means switch to another server in the CARS.
Thanks for the explanations.-can easily be extended to multiple nodes.
-You can use "Oracle Restart' which automatically restarts your resources
-Suppose you have several rac installation among your unique databases, you can manage a single node as you do with the facilities of carsPublished by: Ronny Egner September 28, 2009 16:29
-
How can I change the color one another using "format.color = c?"
Hello
I saw AS3 code which is used to change the color. How to edit to change a different color, red, green or yellow.
format. Color = c;
Help, please.
Change the value of c to another color.
-
Oracle 11 GR 2 CARS + ADG + RAC one node Architecture
Hello
I would like to ask you a few tips on the following architecture if this design is possible
- 2 node RAC on the production data center
- A CCR on DR Datacenter node
- DataGuard replication active between the 2 RAC and RAC node a node
It was a request by the customer, so that the installation of the RAC software on the physics of the eve instead of the usual physical standby of single instance. They do not want another node 2 CARS on the Dominican Republic.
Thank you!
Yes.
-
Change the graph with nodes of property
I've been struggling with this problem for a while now. I have a graph of simple waveform I want to set the horizontal scale to and then make a .png to file. The vi is attached. This vi is up to a lot more great vi. Does not work when I run the first level vi of the adjustment of the horizontal scale. The .png file I receive shows the unadjusted graph. However, if I open this vi and then run the first level vi it works - the graph shows the .png file scale properly. Also, if I just run this vi se it works correctly.
I'm guessing there is a timing issue and the .png file is created before the scaling takes place, but I don't see how.
Does anyone have any ideas as to why the scale does not if the vi is not open, when it is executed?
If the front of the VI is not open, the nodes property can do nothing because they run in the UI thread. This is consistent with the behavior you report with it works when the VI is open.
Can you try to open the façade but putting off the screen (if the user does not see it) and then set the properties of the graph?
Lynn
-
Too many IP addresses on the RAC cluster node
I have 2 Virtual Box computers running a 11.2.0.3 RAC cluster using Oracle Linux 6.3.
It is / etc/hosts on the first node:
[root@vmoe1 etc] # cat/etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
: 1 localhost localhost.localdomain localhost6 localhost6.localdomain6
#
# Public
192.168.56.51 vmoe1.localdomain vmoe1
192.168.56.52 vmoe2.localdomain vmoe2
# Private
192.168.43.51 vmoe1 - priv.localdomain vmoe1-priv
192.168.43.52 vmoe2 - priv.localdomain vmoe2-priv
# Virtual
192.168.56.61 vmoe1 - vip.localdomain vmoe1-vip
192.168.56.62 vmoe2 - vip.localdomain vmoe2-vip
#
192.168.56.74 ol6elsa0
#
192.168.56.251 c11.localdomain c11
[root@vmoe1 etc] #
IP configuration scripts are:
[root@vmoe1 network-scripts] # cat ifcfg-eth0
DEVICE = 'eth0 '.
IPADDR = 10.0.2.15
HWADDR = "08:00:27:D5:E5:93."
TYPE = "Ethernet".
[root@vmoe1 network-scripts] # cat ifcfg-eth1
DEVICE = 'eth1 '.
IPADDR = 192.168.56.51
HWADDR = "" 08:00:27:7 C: 08:7F ""
TYPE = "Ethernet".
[root@vmoe1 network-scripts] # cat ifcfg-eth2
DEVICE = "eth2".
IPADDR = 192.168.43.51
HWADDR = "08:00:27:E9:E8:99."
TYPE = "Ethernet".
[root@vmoe1 network-scripts] #.
But if I run ifconfig, I see that too many IP addresses are assigned:
[root@vmoe1 network-scripts] # ifconfig
eth0 Link encap HWaddr 08:00:27:D5:E5:93
INET addr:10.0.2.15 Bcast:10.255.255.255 mask: 255.0.0.0
ADR inet6: fe80::a00:27ff:fed5:e593 / 64 Scope: link
RUNNING BROADCAST MULTICAST MTU:1500 metric: 1
Fall of RX packets: 146 errors: 0:0 overruns: 0 frame: 0
Dropped packets: 219 TX errors: 0:0 overruns: 0 carrier: 0
collisions: 0 txqueuelen:1000
RX bytes: 11370 (11,1 KiB) TX bytes: 22754 (22.2 KiB)
eth1 Link encap HWaddr 08:00:27:7 C: 08:7F
INET addr:192.168.56.51 Bcast:192.168.56.255 mask: 255.255.255.0
ADR inet6: fe80::a00:27ff:fe7c:87f / 64 Scope: link
RUNNING BROADCAST MULTICAST MTU:1500 metric: 1
Fall of RX packets: 2982 errors: 0:0 overruns: 0 frame: 0
Dropped packets: 2063 TX errors: 0:0 overruns: 0 carrier: 0
collisions: 0 txqueuelen:1000
RX bytes: 355353 (347,0 KiB) TX bytes: 478295 (467.0 KiB)
eth1:1 Link encap HWaddr 08:00:27:7 C: 08:7F
INET addr:192.168.56.61 Bcast:192.168.56.255 mask: 255.255.255.0
RUNNING BROADCAST MULTICAST MTU:1500 metric: 1
eth1:2 Link encap HWaddr 08:00:27:7 C: 08:7F
INET addr:192.168.56.65 Bcast:192.168.56.255 mask: 255.255.255.0
RUNNING BROADCAST MULTICAST MTU:1500 metric: 1
eth2 Link encap HWaddr 08:00:27:E9:E8:99
INET addr:192.168.43.51 Bcast:192.168.43.255 mask: 255.255.255.0
ADR inet6: fe80::a00:27ff:fee9:e899 / 64 Scope: link
RUNNING BROADCAST MULTICAST MTU:1500 metric: 1
Dropped packets: 197896 RX errors: 0:0 overruns: 0 frame: 0
Dropped packets: 128717 TX errors: 0:0 overruns: 0 carrier: 0
collisions: 0 txqueuelen:1000
RX bytes: 160437548 (153,0 MiB) TX bytes: 62783891 (59.8 MiB)
eth2:1 Link encap HWaddr 08:00:27:E9:E8:99
INET addr:169.254.237.102 Bcast:169.254.255.255 mask: 255.255.0.0
RUNNING BROADCAST MULTICAST MTU:1500 metric: 1
Lo encap:Local Loopback link
INET addr:127.0.0.1 mask: 255.0.0.0
ADR inet6:: 1/128 Scope: host
RACE of LOOPING 16436 Metric: 1
Fall of RX packets: 32960 errors: 0:0 overruns: 0 frame: 0
Dropped packets: 32960 TX errors: 0:0 overruns: 0 carrier: 0
collisions: 0 txqueuelen:0
RX bytes: 19428995 (18.5 MiB) TX bytes: 19428995 (18.5 MiB)
[root@vmoe1 network-scripts] #.
According to syslog, it seems that NTP uses IP addresses a lot for example 192.168.56.65:
[root@vmoe1 network-scripts] # grep "56.65" var
Mar 19 14:35 vmoe1 ntpd [1545]: listening on the interface #11 eth1:1, 192.168.56.65 #123 Enabled
Mar 19 14:43:23 vmoe1 ntpd [1735]: listening on the interface #12 eth1:2, 192.168.56.65 #123 Enabled
[root@vmoe1 network-scripts] #.
Can someone explain why 192.168.56.65 this IP address is used by eth1:2?
I found the reason why: IP addresses ending with 64, 65 and 66 are used by the listener to SCAN:
[root@vmoe2 ~]# srvctl config scan SCAN name: vmoe-scan.localdomain, Network: 1/192.168.56.0/255.255.255.0/eth1 SCAN VIP name: scan1, IP: /vmoe-scan.localdomain/192.168.56.65 SCAN VIP name: scan2, IP: /vmoe-scan.localdomain/192.168.56.66 SCAN VIP name: scan3, IP: /vmoe-scan.localdomain/192.168.56.64
-
Because a node on the Rac servers
Hi Xperts
We have this environment:
2 cars 11.2.0.3 Enterprise Linux Oracle 5.9 knots.We have a production of data base on this car and the users request to create two unique instance on each node, something like this:
Node1-> Rac Prod1, only Test
Node2-> Rac Prod2, single DevI want to create Rac one node for these databases (Dev, Test) and create the new starts for ech of database.
Can I install a Rac one node on the server with DBCA?
Can I Normand to install new database software?
The RAC installed there some assignment?I just want to be sure on this procedure, before you do anything.
Thank you
JUDGE
Hello
Well, it does not use emotive, they call just the technology for failover planned like that. To order one RAC node, you must use srvctl utility. The documentation is good starting point:
http://docs.Oracle.com/CD/E11882_01/RAC.112/e16795/oneNode.htm
Patches could come from MOS (My Oracle Support), here are the numbers:
Patch 10404530: 11.2.0.3.0 PATCH SET FOR ORACLE DATABASE SERVER
Patch 13390677: 11.2.0.4.0 PATCH SET FOR ORACLE DATABASE SERVER
EVS
-
Change the color of the nodes in the tree based on a regular expression
Dear Experts,
Given:
Sample:
http://Apex.Oracle.com/pls/Apex/f?p=53647:5
Test/test
Information from the workspace
Workspace: ralab
user: test
password: test
application: trees-samples
page: 5
Mandatory
I can change the color of node using jQuery contains() selector based on a value, for example the project
Now, the question:apex.jQuery("#eba_demo_tree").find("a:contains('Project')").css("color","red");
How can I update the jQuery code to change the node based on a regular expression as
or in other words for all the nodes starts with P, the color needs to be changed in red?^[P]
Best regards
Mahmoud$("#eba_demo_tree a").filter(function(index){ var lRegExp = /^m/i; //or new RegExp('^m', 'i'); //trim to get rid of leading space due to space in encapsulated ins-element return lRegExp.test($(this).text().trim()); });
http://API.jQuery.com/filter/
http://www.w3schools.com/jsref/jsref_obj_regexp.asp
http://www.regular-expressions.info/JavaScript.html -
Presentation of form data XML - Can change you the structure of nodes?
Hi guys, I was wondering if there was a way to change the structure of nodes in an xml file [submitted via a form by e-mail], instead of that livecycle creates by default. or is it a case that once you select "submit as: data XML (XML)"-it is out of your hands? " In the meantime thanks for any help / suggestions. At soon Dyr
You can create an XML schema and map it to the form fields by creating a data connection (see Help file). In this way you structure the XML into any format you want.
-
Change the thickness of a font.
Hello good evening.
I have a challenge to change the thickness of a font, I use Illustrator to create the Visual identity or the famous logo.
The principle is to be one of the easiest, but it became a book challenge. A friend has the identity of his company in the PS, but low resolution, such as an exchange of services, I offered to vectorize on illustrator, got the logo and the police found a 90% similar, but much thicker thick, it has the original file, to do this in PS this would be a matter of selection > modify > contract and loan , but the problem when I go back to the source for the Illustrator uses the image and the trace of the police is slight distortion.
Let the challenge, necessary to reduce the weight of the font in Illustrator without losing the features.
I know only two options.
1 because it uses a graphite color background and put in the same color and sussa to use the web with applied the same background color is perfect. But if you change the background you need to keep changing the race and soon png or thinking. (This was the solution I found initially)
2nd trace source in the tool pen and will merge together to form the letters of the name. It will take some work but I'll be able to deliver the logo without restriction and dependence to change this and that.
I wonder what other options I have to reduce the thickness of this source in the illustration, if you use the PS without problem, but when you open the precise IT sure features to vectorize know only the image option it draw.
Let the police.Source language
You want
The solution that I found without merits.
- Set the "frame of character', 'None '.
- ' Use 'Lag' effect on an attribute of ""fill object "in the appearance Panel.
Edit:
In fact, you can assign only the "offset" to the object Type. The character frame is affected.
-
Change the public Interface on Clusterware
Hello
I have a node RAC 4 10.2.0.3 under RedHat Linux AS 3. Recently I noticed that eth0 on one of the departures nodes up and down for short periods of time. If this happens long enough it affects connections established for her etc.
I'm afraid that the network card is about to fail, because this material is old enough. The machine has 2 other NICs unused on it and I want to change the public interface the clusterware uses one of these ex eth2.
I know how to do, is using oifcfg, but my question is. If I change the interface on node 4 ex $ORA_CRS_HOME/bin/oifcfg setif-eth2/192.168.1.0:public overall, this would amount to this public interface uses eth2 to node 4 or 3 elsewhere. Just to be clear, I would like to than the other 3 nodes to always use their interface public current IE eth0.
Thanks in advance.You must have the same interface name on all nodes to the public. You could ensure that the other card on the 4 node becomes eth0.
Kind regards
Marielle Naud
Global technical Manager / Oracle Clusterware and RAC
Support of Oracle.
Maybe you are looking for
-
Laptop HP 650 - network wireless problem
Hello I have a laptop HP 650 I installed windows 7 x 64 sp1 I downloaded all the drivers for the HP product page I installed all the drivers, but I have a problem with the driver for the wireless network. All drivers works fine, except wireless drive
-
Satellite L750D - 1CP - how to reinstall Windows
Hi all I had my Toshiba for three years, which means that it becomes slower and fuller every day. I bought the laptop with Windows 7 pre-installed, so I never received a disc to re - install Windows if wanted. But at this point, I am a lot would like
-
L10-202: ACPI Module does not work with Linux SUSE 10
I bought a Toshiba laptop L10-202 a few weeks ago and tried to install SUSE 10 on it. The installation went well but I have some problems with ACPI modules.I know that Toshiba recommends Windows XP but I have nowhere to ask for help because I could n
-
Failed to instantiate new custom class object - no trace of the stack
Hello I have a little maddening problem. I created a custom class called 'Notification '. When I try to create an instance of the latter, I don't get any stack trace. Here's the class: package net.creative.core.util; import net.rim.device.api.system.
-
How to create a secure page. Not a secure area, just a https page to a form?
How to create a secure page. Not a secure area, just a https page to a form? I can't find a way let me by creating or copying a page in dreamweaver and admin console is only showing the current http pages. I created before secure areas and included s