Changing the settings after startup

Similar Questions

• Whenever I try to change the settings for startup from the Control Panel, a pop up tells me that I need to activate Windows Defender and open

  I installed Microsoft Security Essentials today and I'm trying to edit startup programs. Whenever I try to change the settings for startup from the Control Panel, a pop up tells me that I need to activate Windows Defender and open.  However, most of the security will not allow Windows Defender be turned on and I want to change the startup parameters.  How can I accomplish this?

  Hello

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And now edit startup in Vista without using Defender programs, use one of the following methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• Cannot change the settings after the take snapshot in VM

  Hello forum, I need to increase a disc size and the number of virtual processors on couple of virtual machines, the last week I have instant tool of these virtual machines. Today, when I try to change the settings, I see that the options are grayed out. Why is it so? This is a limitation of vmware. Do I have to delete the snapshots before making changes? Which will remove the ability to roll back changes if necessary. I'm under Windows 2008 R2 virtual machines.

  Virtual disks can only increase if they have no active snapshots. The snapshot files contains modified data blocks that correspond to their parent records, and this mapping I lost if you have increased a virtual disk with snapshots.

  André

• Vista Home Basic - changing the settings after restart

  1. I need to use the mouse with my left hand, so I swap the buttons in the control panel.   However, If I restart Windows, the keys are not exchanged.  I changed the registry key, but I do not do this.

  2. I set the control panel to display a list of items, not the icons, but it is up to the icons, whenever I close.  I use the classic look.

  3. I put the mouse pointer to go automatically to the default button in a dialog box.  It does in the majority of cases, but many there no, Notepad for example. I guess it's to do with the show but y at - it a fix for Notepad, for example?

  Does he know about fixes for these problems (I have installed all the updates I don't know).

  original title: Vista Home Basic - boring bugs

  Go to start / Control Panel / file settings / display and check the box then remember each folder view settings.  That should fix the problem with the Control Panel views (but to be honest, I'm not sure that it will work with control panel because it is another type of folder - but it's worth a try).  If this does not work, I don't know how to get the system to keep the details of opening view (this is the only control that I know to keep folder settings).  For what it's worth, this does not happen on my system - when I put on the details and close it, then open it it is still in the Details view.  I have 32 bit Vista Business SP2 but I don't think this should make no difference to the same problem.

  We will check your file system and hard drive for all the corruption that may cause this problem:

  Go to start / all programs / accessories / command prompt, right click command prompt and click Run as administrator (you can skip this step if you are using the disk).

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.  Try to put all the corrupt files here so that we can see if they can be repaired with good copies of the installation disc (unless there are too many).

  While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and attempt to resolve any corruption or bad sectors on your hard drive and remove especially as a potential cause.

  If this does not work (or or show corruption it cannot repair), the only option I know eventually the problem is repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. You can have a lot of updates to re - install (including all you need to remove service packs).  If the version of the system came with SP1 or SP2 preinstalled and the disc is an earlier version, then you will need to make a record of slipstream as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.  The decision is yours, if you want to go through that much trouble to fix this (assuming you have the disc).

  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------

  It seems that your left mouse button problem is already solved by changes to the registry.  I don't know why it didn't keep its settings just to configure in Control Panel - that's what's supposed to happen (not what happened to you).

  The other problem with the mouse can be a problem with the individual programs (such as Notepad) or since you have detailed two separate problems with the mouse, it may have something to do with your mouse, software, firmware driver (or your mouse with Vista compatibility).  I would go to the manufacturer website and download the latest versions for your system and compatible with your version of Vista (making SURE it is compatible with Vista) and install them (or reinstall if you already have this version here).  There may be something to do with these elements to reinstall trouble.

  In Notepad, there is no solution for this problem.  There is no separate for Notepad - download this is the part of the operating system and re - install you will need to re - install the complete operating system (and who may not even solve the problem). What you said about it being a problem specific to the programs is probably correct - especially if she does not work in most of the programs (and I've never seen a mouse pointers control feature in any program I have ever used - it is assumed that is controlled globally of the settings in the control panel).

  Sorry, this was not in fact of great help (unless the mouse, software drivers and firmware option works).

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Can't make a HD video, after that I updated the product? and there is that a message says it can't encode video and will have to change the settings to try again!

  Can't make a HD video, after that I updated the product? and there is that a message says it can't encode video and will have to change the settings to try again!

  jilll

  What version of Premiere Elements you use, what computer operating system?

  What would you update... have you had 12 and 12.1 updated or have you 13 and 13.1 updated? Or did you upgrade may 14 from a previous version?

  Where are you in the settings for your version where you get the message saying you cannot encode the video and you may need to change export settings?

  What is your planned export?

  Please explain, give more details.

  I will review your wire in the morning morning look to follow so that I can help you succeed in your Premiere Elements project.

  RTA

• LiveCycle ES4. I am trying to move a picture online with a text box to create a header.  I had to create a subform that flows to generate multiple pages of text.  After changing the settings, it seems that I can't place images and text where

  LiveCycle ES4. I am trying to move a picture online with a text box to create a header.  I had to create a subform that flows to generate multiple pages of text.  After changing the settings, it seems that I can't place the images and the text I would like.  I tried moving them to the bottom, but does not work.  Is there a way to encapsulate the images so that they can be places as much as I want?

  Select your photo and text inside the subform flowed. Right-click and select wrap in subform do the positioned Subform subform. This will allow you to move objects in this subform positioned the way you like them.

• Lightroom Sdk: How avoid the re publish all after changing the settings of service?

  Hi all

  I'm working on a publishing service for lightroom. I would like to have the build of lightroom in the dialog box "you have changed the settings for this publish connection" to show.

  All my settings affects all pictures and we don't need to re publish all. But when users see this dialog box, they don't understand and re publish all a lot of time.
  It is useless and wasting time.

  I have no idea to avoid the tthat. I wish I could say (as for metadata) what parameters trigger a re publish action.

  Thank you for your help,

  All the best,
  Martin

  If you repost this in the Lightroom SDK forum, it is more likely, someone knowledgeable could see and answer.

• In Windows Vista, I can not change the settings in my 'reports on problems and Solutions' Please help

  I'm the administrator of this PC, and it is the only account that I have.

  Quick fix pls help thnks

  Hello
  • What happens when you try to change the settings?
  • You receive an error message?
  • What were the changes made before the problem occurred?
  • Which settings you want to change?
  
  You can view these methods:
  Method 1:
  I suggest you to disable any program of security on your computer and check if it solves the problem.

  After reviewing the question you must reactivate the security on your computer program.

  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  Method 2:
  I recommend you perform the clean boot.

  Configuration of your system in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

   

• Tecra A10 - cannot change the settings of the BIOS with supervisor password enabled

  Hello
  I activated a supervisor for 1.50 acpi BIOS password.

  Since then, I am not able to change the settings (for example etc. - the right of the screen of the BIOS boot order does no more).
  I access the bios with pressing ESC on the boot process, then F1 when prompted "" check system, then press [F1] key. Problem is that I don't ask the supervisor password.
  There should be a prompt for the supervisor password, but it's not. So I am not able to connect as a supervisor.
  I know I can manually change the boot sequence by pressing F12 during startup, but this strict solve my problem.

  THX in advance
  elitecamper

  Have you tried to update the BIOS? On the Toshiba site, I can find a newer version that you have right now. Check it!
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Before setting a supervisor password load default settings in the BIOS and then you can set the password and try again. Maybe it works.

• Ability to remotely change the settings of the BIOS on the Thinclients T610?

  Hi all!

  We use thin clients HP t610 for digital signage and we have deployed more than 40 years in the field. They seem to work just fine for our needs.

  After a few failures caused by construction crews an i've had phyiscally visit each sign to reactivate them. Since then we have deployed the t610s with the ' after the loss of power = on "setting in the BIOS. This seems to fix the problem and they light up immediately once the power is restored. Now that we have solved our problem, I would like to change the client deployment light setting as well.

  Is there a way I can change the settings of the BIOS on the t610 remotely? Or do I have to visit each change them manually and the machine with a keyboard? Some are installed in small spaces which are no easy access to remotely change would be better.

  Thanks for your help!

  Depending on what OS you have on the t610 you can download BIOS utilities for this on the HP website: http://h20565.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?cc=us&cc=us&lang=en&lang=en&sp4ts.oid=5226817&ac.admitted=1404312731554.876444892.492883150

  There is an included cmd line tool that captures the BIOS settings that you can edit in a text file and deploy it to other units remotely via HP device for example Manager.

• Document and changing the settings

  Computer's hand and have no disk Windows XP Prof. of origin.  Unable to access up-to-date Outlook 2010 without him to be lacking in the original Server Configuration and password.  How can I fix it, put in place the new "documents and settings" folder with the new username?

  Get disks.
  Format and clean install.
   
  Why?  Not sure what all could subsist on this 'hand '.  If you can see the type of Windows XP Professional is installed (OEM, retail - usually can tell the product ID found in the property system, under the general tab window in the section ' recorded at the ') and you can find someone with a generic version (unedited) of said operating system installation media (Windows XP Professional OEM or retail - in accordance with what you have discovered)-then you can get the product key from the system work (Belarc Advisor) and do a clean install.
   
  Make sure that you back up all important data for you.
  Make sure that you have the installation media product keys/serial numbers and separated from the machine for everything that you will need to install.
  Make sure that you have the list of the material and/or have already downloaded the drivers for the hardware to install after clean installation.
  (The last two are greatly helped by using Belarc Advisor, print the results.)
   
   
  * You should be able to change the settings for Outlook via--> MAIL control panel - at least for the current user.
  
  --
  Martin Stanley
  MS - MVP
  --
  How to ask Questions the Smart way
  http://www.CatB.org/~ESR/FAQs/smart-questions.html

• My screen keeps dimming every few seconds, even if I changed the settings and saved!

  Hi I have Windows 7 and I have passed to the control panel and changed the settings for power. I got my high-performance switch mode, changed the settings so that it only fades every 10 minutes and saved. However, my computer keeps dimming of the screen at very low about every 7 seconds! I have to make it brighter, but it fades again! Sometimes it fades it right after she cheer up! I even tried to make a personalized plan, but it did not work. What can I do to make the screen stop all seconds dimming! I've tried everything!

  You are using a laptop computer monitor or a desktop monitor / external?  This is much like a monitor that has its own management food or, as with many TVs, the ability to change the brightness in response to changes in ambient light levels.

• Cannot view or change the settings of backup - error Code 0 x 80070422

  I am able to run a backup using the existing settings/settings I put when my system was new two years ago.  I just ran a backup and finished without any problems.  But when I click on "Change settings" to view the settings, I get the error code 0 x 80070422.  Error message States "the backup application could not start due to an internal error" followed by "the service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  I already read many posts on this site about this error and how to correct.  I followed the suggested steps to fix the problem, but the error persists. =(

  Specifically, I checked that the following Services are enabled.

  -"Remote Procedure Call" (RPCSS) must be active, Automatic.

  'COM + Event System"(EventSystem) must be active, Manual.

  -'System Event Notification Service"(SENSE) must be active, Automatic.

  -"Volume Shadow Copy" (VSS) must be active, Manual.

  'Microsoft Software Shadow Copy provider' (SWPRV) must be active, Manual.

  I also ran an SFC scan and received the following confirmation at the end-

  "Windows resource protection has not found any breach of integrity."

  Any suggestions on the next steps, I could try to fix this? 

  Thank you!

  Hello

  Please provide detailed information on this issue and I appreciate your valuable troubleshooting efforts toward the resolution of the problem.

  However, we are still missing about two or three services so that this error happens when the necessary services are disabled.

  Method 1: Please check these services.

  • Block level backup engine - active - repair manuals
  • -Active - backup manual Windows

  If the settings above does not work, you can try to adjust Volume Shadow Copy (VSS) on Automatic and check if that helps. Then change it back to Manual after verification.

  Once you make changes according to the above specifications, you can try a backup and check to see if that solves the problem.

  If the problem persists, follow the next method.

  Method 2: Disable the antivirus.

  You can also try to temporarily disable the security software of the computer and try to create a backup and check if it works. If you are able to create a backup, you can contact the manufacturer of security software and check if you need to change the settings. Later, re-enable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Reference:

  Set up or change automatic backup settings

  Back up your programs, files and system settings

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

  ____________________

  Thank you best regards &,.

  Isha Soni

• How to change the settings for the taskbar in Windows 7.

  Anyone know if its possible to change the settings for the taskbar for the other windows or games can cover or be on top of the taskbar. I have my taskbar set to the top of the screen and when I start Flight Simulator Microsoft in full-screen or 1920 x 1080, he fills the entire screen except the upper part which is the bar of tasks, and because of this the windows sim who loses more space and shows its own menu with windows that... yet once loses more than space. The vertical extent of real world it takes away 1 inch of space on the screen that I find pretty ridiculous. These two programs are both manufactured by Microsoft, in my opinion, that they must work with each other, so I hope that im missing something in 2015?

  Thank you all

  Win 7 64

  AMD 955

  NVIDIA 460se

  4 GB

  Edit: Auto Hide on the top is not a solution but a miserable boring frustration.

  (Taskbar + tabs/url/search/minimize/output = someone must die)

  

  Thank you program is in windowed mode full-screen because of the taskbar.

  * See below screenshot of restoration

  for everyone who has this problem, I found a solution!

  Download rammichael.com/7-bar of tasks-tweaker

  Right click on the bar tasks once run-> advanced-> click disable_topmost options->, icon 7TT

  Enter 2 (starting from 0)-> click on apply and ok

  * Note that the program must execute to the difficulty of working so defined to run at startup during installation

  This program does a lot of things, but this will allow your taskbar to stay in place and allow it to be covered by windows.

• How can I change the settings in the appearance of a user without admin rights?

  Hello! Here's the deal: when I logged as a nonadministrator user, I can't customize some settings for this account in appearance.

  After that I have to change some settings, for example to disable smooth list scrolling areas, all these settings back after reboot.

  I think that this somehow related to the fact that these actions require administrator rights and basically at the end of the day I change the settings to another account (Administrator).

  Hello

  Thanks for the quick response.

  Based on the screenshot provided by you and my research, this problem seems to be related to the (UAC) user account control.

  Please check the suggestion provided by Andre.Ziegler August 5, 2010 in the link below and if that helps.

  Visual effects settings will remain disabled after a restart on the limited user account...

  Note:

  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  You can use the following link to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756/

  Hope the helps of information provided. Let us know in case you need more help.