changing the settings of display on reboot

Similar Questions

• Changing the settings to display randomly - 1152 x 864 resolution changes randomly to 1024 x 768

  At seemingly random times, the display settings change of 1152 X 864 pixels, I put it to 1024 X 768, that moves a lot of icons.  I then have to go to customization - display back change and move icons where I want that they on the desktop.  It's very annoying.  I have a Gateway computer and have seen similar complaints from Dell and HP users.

  How can I get the display of 1152 X 864 to stay?

  What causes the display to change?

  Thank you

  Bill Kenney

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Try to check and clean boot if this can help.

  How to solve problems using the clean boot in Windows 7: http://support.Microsoft.com/kb/929135  
  Note: once the diagnosis has been made, make sure that you try to step 7 of the article to reset the computer as usual.

  Method 2:

  Run the scan of auditor of file system (CFS) and check if it helps.

  How to use the tool File Checker system to troubleshoot missing or corrupted on Windows 7 system files: http://support.microsoft.com/kb/929833

  Note: this will help you to replace the system file that is causing the problem.

  Method 3:

  Try to update the display driver and check if it helps.

  Updated a hardware driver that is not working properly:
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope that helps!

• I change the settings of firefox and accidentally closed on the display tab, which displays the files, settings, and tools. I can't see how to reset it back to default where I can see those?

  I change the settings of firefox and accidentally closed on the display tab, which displays the files, settings, and tools. I can't see how to reset it back to default where I can see those?

  You can hide the menu bar in Firefox 3.6 on Windows, on "view > toolbars" or via the contextual right click menu on a toolbar.
  Press in and hold the Alt key to display the menu bar.
  Go to "view > toolbars", right click on the menu bar, or press Alt + V T to select the toolbars to show or hide.

  See also what happened to the file, edit and view menus?

• How can I change outlook settings to display the field 'to', so that I can see that the emails were sent at a glance?

  How can I change outlook settings to display the field 'to', so that I can see that the emails were sent at a glance?

  Outlook:

   

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

  http://answers.Microsoft.com/en-us/Office/ee861097.aspx

  Outlook Help Forums at the link above.

  They will help you with your Outlook questions when repost you in the Office Forums above.

  See you soon.

  Mick Murphy - Microsoft partner

• Why first changing the Windows 7 display settings?

  Hi all

  I am running Windows 7 on a brand new i7, two monitors and a nvidia Quadro 4000. I have most of the Windows display settings (Aero-stuff) turned off to speed up Windows performance.

  When I opened the first, first changes the windows settings - something - display. Both monitors flicker black and the Windows taskbar change color and opacity, as if someone had gone in the command menu customize and changed my look colors and display.

  The question is this - because the first is changing my display of the Windows desktop, other programs are still using the previous (correct) display settings. Causing other programs to crash whenever I try to alternate between them. It translates into me being able to run the first to him alone, which significantly slows the multitasking.

  WHY FIRST CHANGE MY SETTINGS IN WINDOWS?

  Better yet, how can I stop this? I can't find any project, General or sequence settings that give any hint.

  If I need to change the settings of Windows customization to match first is to choose himself, it's good, but I still need to know what are these parameters, so that all programs use.

  Thank you

  -Matt

  I use a full Win7 Aero desktop computer on my Quadro 4000.  I had a problem similar to yours; "Aero" turned off when Pr and then open 'Aero' turns after the release of Pr.  If you go to the NVIDIA Control Panel, under Management 3D settings, on the global settings tab, select a color deep for 3D applications and assign the disable.  Then check that Pr uses this setting by looking at the Pr entry on the program settings tab (if the Pr does not list programs you can Add this).

• How to change the settings for screen rotation?

  How can I change the screen on my Symphony GoFox F15 rotation parameters? I don't know how it has changed, but before change it worked normally. Now I want to change the settings manually on the rotation of the screen. How can I do?

  Go to settings, display, and then select "lock direction" off screen rotation and disable to stop rotation of the screen.

• change the settings of the view variable value

  Hello

  I want to know if it is possible to change the settings for the debugger, including the display of the "view variable values" settings in labwindows cvi 9.0.

  My problem is that in my project, it is essential to be able to debug and I came across some difficulities with the array of structs containing pointers to structures. So, I did a demonstration to show project:

  typedef struct {}
  short sVar1;
  short sVar2;
  char cVar1 [512];
  } MyStruct2;

  typedef struct {}
  MyStruct2 ReadMyS2;
  MyStruct2 WriteMyS2;
  MyStruct2 * pReadMyS2;
  MyStruct2 * pWriteMyS2;
  } MyStruct1;

  int main()

  {

  MyStruct1 MyS1_Phis [3] = {0};
  int i = 0;

  init
   
  for (i = 0; i<>
  {

  MyS1_Phis [i] .pReadMyS2 = & MyS1_Phis [i]. ReadMyS2;

  MyS1_Phis [i] .pWriteMyS2 = & MyS1_Phis [i]. WriteMyS2;
  }

  }

  Unfortunately, the debugger handles .pReadMyS2 pointer [0] MyS1_Phis as if that it points to an array of 10 elements of type MyStruct2.

  Anyone know the reason for this?

  Thanks in advance,

  Laszlo Nagy

  Hi Laszlo,

  Yes, it is a known problem in CVI. This can happen because of the way the CVI user protection is implemented. It is certainly not desirable, but we probably won't be able to change it at least still a year or two.

  A solution you have is to disable the protection of the user and then rebuild your program (Options > Compiler Options > level debugging: no execution check)

  Luis

• "Svchost.exe has tried to change the settings. Blocked attempt. »

  Original title:

  Svchost

  When I installed the anti-virus program, I put it up to block any attempt to change my home page, my search engine, or my Web browser.  Since that time, I get a message every time I reboot the computer and whenever I go out to the Internet.  The message from my anti-virus program is "Svchost.exe has tried to change the settings.  Blocked attempt. "Whey is svchost.exe keep, try to change my settings you want?  Is it possible that I can prevent this so that those irritating little messages will disappear?

  Hello

  Read this information:

  http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-svchostexe-and-why-is-it-running/

  And also Malware scanner

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• Windows Photo Gallery. How can I change the settings in the Windows Photo Gallery to automatically open the image without going to the index first?

  Windows Photo Gallery.  How can I change the settings in the Windows Photo Gallery to automatically open the image without going to the index first?

  Additional information: there are 2 computers that I use on the first Gallery Photo of Windows will open the image and allow me to use the left and right buttons to scroll through the rest of the photos in the folder, that's what I want.

  On the 2nd computer when I open an image it will open the Windows Photo Gallery in an index with thumbnails of the displayed record.  How can I change so that it opens the same thing as the first computer?

  I did the following on both computers; Right-click on the image and select open with...--> choose the default program--> go--> Program Files, Windows Photo Gallery, but it will be open always differently on computer 2.

  Both computers use Windows Vista 32-bit.

  Thanks in advance.

  Australian salvation,

  This would happen if the file associations are corrupted on the computer, try method to set Photo Gallery Windows as the default program for opening files jpeg or png below image types.

  (a) open default programs by clicking the Start button, click default programs.

  (b) click on associate a type of file or Protocol with a program

  (c) in the following list of file protocol search jpeg and make sure that you have associated with the program that uses it and then check if it works.

  Change the programs that Windows uses by default

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is it possible in Windows Live Mail to change the settings for the images remain in the body of the email, not in a slide show?

  change how I get pictures on incoming emails

  Most, but not all emails that I receive that contains images come as 'slide show', and where the image should be, there is a blank box with a red x.  Is it possible in Windows Live Mail to change the settings for the images remain in the body of the email, not in a slide show?

  I know that they are sent correctly, because I send on my iPod and the photos are where they should be.

  I have Windows 7 and I hope you can help me.

  Thank you

  Hello

  ·         What browser do you use?

  ·         What happens when you click on the slideshow of the photo? The photos are displayed when you click the slide show?

  If you use Internet Explorer, then I would suggest that you follow the instructions in the link and check if this can help:

  http://support.Microsoft.com/kb/283807

  If operations since the link above does not help then I suggest that you post your query on the Windows Live forum for assistance:

  http://windowslivehelp.com/product.aspx?ProductID=15

• change the camera Flash Mode without rebooting the viewfinder,

  Hi, is it possible to change the flash of the camera mode without having to restart the viewfinder?

  Thank you!

  void CameraTest::changeFlashMode()
  {
      if(currentFlashMode==CameraFlashMode::Off)
      {
          currentFlashMode=CameraFlashMode::On;
      }
      else if (currentFlashMode==CameraFlashMode::On)
      {
          currentFlashMode=CameraFlashMode::Auto;
      }
      else if(currentFlashMode==CameraFlashMode::Auto)
      {
          currentFlashMode=CameraFlashMode::Off;
      }
  
      cameraSettings->setFlashMode(currentFlashMode);
      camera->applySettings(cameraSettings);
          camera->open();
  
  }
  

  When I change the settings of QML, the viewfinder of the camera doesn't have to be restarted. I can't do it on C++, and if it does not restart without the last line, so I hope someone else can jump in and help.

  Good luck!

  Edit: I' read part of the API of the camera, and nothing not said that this

  // Use the camera pointer to get
  // the current settings.
  cameraObj->getSettings(settings);
  
  // You must cast newFlashMode to a CameraFlashMode::Type
  // to pass it to the setFlashMode function.settings->setFlashMode(CameraFlashMode::Type(newFlashMode));
  cameraObj->applySettings(settings);
  

  will force a reboot of the viewfinder.

• How can I change the settings in the appearance of a user without admin rights?

  Hello! Here's the deal: when I logged as a nonadministrator user, I can't customize some settings for this account in appearance.

  After that I have to change some settings, for example to disable smooth list scrolling areas, all these settings back after reboot.

  I think that this somehow related to the fact that these actions require administrator rights and basically at the end of the day I change the settings to another account (Administrator).

  Hello

  Thanks for the quick response.

  Based on the screenshot provided by you and my research, this problem seems to be related to the (UAC) user account control.

  Please check the suggestion provided by Andre.Ziegler August 5, 2010 in the link below and if that helps.

  Visual effects settings will remain disabled after a restart on the limited user account...

  Note:

  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  You can use the following link to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756/

  Hope the helps of information provided. Let us know in case you need more help.

• Hardware acceleration, change the settings for troubleshooting is grayed out.

  Original title:

  Hardware acceleration, change the settings for troubleshooting is grayed out. Help?

  I can not turn off hardware acceleration because to solve the problems of change of settings is grayed out. How to sober up there make out or how to access hardware acceleration via the command line? Help is appreciated.

  Hello
  Updated graphics card drivers and check if it works:
  See the Microsoft article below for more information on updating drivers: update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links
  Also check the display setting and locate the driver for the additional settings interface.
   
   

• How to change the settings on the computer so I can read the fonts adobe photoshop on Windows 8?

  Police is size 2 - Impossible to read, display in the Panel settings do not change the Adobe applications and other applications?

  Hello

  
  Let start with a question.
  The question is limited to Adobe Photoshop?
   
  
  If it is only with adobe Photoshop you will need to change the settings in Photoshop and check.
  I suggest that post you the same question in the adobe community to improve assistance.
  Check out the link and your question bouquet
  http://forums.Adobe.com/community/Photoshop
   
  
  Reference: http://help.adobe.com/en_US/photoshop/cs/using/WSECD532BA-A34D-494b-BF39-8A583667413Ca.html
  
  Hope the above information helps.

• How can I change the settings so that when I delete a file, it asks me to confirm

  I just got a new computer with Windows 8.

  I have not changed the settings, if its because it has been implemented.

  When I have a file, such as an e-book, if I want to delete, I'm used to by clicking on the delete key, then a box saying to come to confirm that I want to delete.

  This box is NOT coming. I need him.  Deletion of just the delete key, without confirming.  I hit by mistake in the key deletion files!

  I checked in the APPEARANCE AND PERSONALIZATION, click RECORDS OPTIONS Control Panel section, and there is no option to make this change.

  Hello

  Right click on the shortcut to the Recycle Bin and select Properties.

  There is a checkbox for "Display Delete Confirmation Dialog".

  PERFECT!

  I worked!
  Thank you very much for being so quick!