Channel 100 on airport Time Capsule

Similar Questions

• Time Machine (on Mac) does not detect the airport Time Capsule

  Originally posted on the page of the airport, but seems to be the better question for this group. Sorry for the double post

  Looking for advice on how to get the Time Machine utility for access to my Time Capsule. I use an iMac in late 2012 with MAC OS 10.12 TimeCapsule is 2015 7.7.7 running latest firmware. Airport utility is the latest firmware 6.3.7.

  When I run the application Time Machine, Time Capsule is not detected. I tried the two WiFi and with cables connected Ethernet (not tried USB yet) and my Time Capsule doesn't have a lightning bolt or firewire ports.

  Open Airport utility & see the airport time capsule. I can see all connected devices, including the MAC, but no prompt activation Time Machine on the Time Capsule.

  I recently used TM on this iMac with a G-Technology drive. It auto detects the time machine and executes a back up. But airport Time Capsule will not.

  Any suggestions?

  Sierra has been problematic with the TC.

  1. make sure you don't have any charge virus protection software. In fact, I would say that disable all software 3rd part at the moment.

  2. make sure that you can actually write to disk of TC.

  Attach the TC disc in the finder and copy a file on disk, you can delete it later... It's just to ensure that you have full write permission. If it does not for the most part, you won't be able to use Time Machine... If you can then try TM immediately...

  Just to be clear, the TC is a network device. You have tested with ethernet and wireless... Ok.. They are only suitable methods. You cannot use USB. And clearly, TC has never had nor will never be ports Firewire or lightning.

  3. no chance that a reset complete TC. This will not delete the files on the hard drive, but you must make sure that the device is configured on the current computer.

  4. There are many positions in these days... read through them and do some research. Sierra is a bleeding edge new... So wait you to spend a lot of the precious liquid if you choose to be an early adopt.

• HOW THE AIRPORT TIME CAPSULE WIRELESS NETWORK IS PROTECTED?

  I implemented the airport Time Capsule, using a DSL modem connected to the internet as its bridge.  MacBook Pro was used for initial set up by the bolt of lightning to Ethernet connector and then disconnected and works perfectly.  Now, I would like to use Wi - Fi for my Samsung phone not iOS.  On the Samsung wireless I connect to my home network using a password.  Well, I don't think that a password was never set.  How can I configure my wifi at home to establish a password?   I don't think that the modem settings should enter in solving this for me, but I'll add that the modem required a static IP address be entered for this connection when its router features have been disabled for the connection of bridge.

  If the Time Capsule (TC) provides the wireless network, then you can secure it using AirPort Utility, as follows:

  • Run the AirPort Utility.
  • Select the TC and then, select change.
  • Select the wireless tab.
  • In the wireless security, select the type of security. I highly recommend that you choose: WPA2 Personal
  • Enter a password in the field password wireless. Enter the same password in the verify password.
  • Select Update.

  

• Airport Time Capsule and WD MyBook

  I'm a newbie Macbook Pro owner, about a week now, El Capitan running.

  I've just hung up my Airport Time Capsule (3 t) and it seems to work, as the reports of Time Machine backup complete.  I am also connected to the WiFi Airport.

  The Installation Guide says I can connect a hard drive via the USB port.  I have connected a WD MyBook USB port; It is in the format exFAT and contains the data from my old computer to Windows 7.

  What should I do to make this available for the Macbook Pro?  I don't see anywhere in the finder.

  The time Capsule cannot read USB drives to NTFS or exFAT format. Plug it directly into the Mac.

  (144647)

• AirPort Time Capsule Help!

  I have an airport Time Capsule, which supported my computer for the last 2 years.  We have recently changed our router and now cannot save.  This is obviously because of the wifi name and different password for what is stored in the time Capsule.  I looked at various manuals and notes help but it says click on edit and I don't see it.  There is no change when I go to Applications - Utilities - airport, just my time capsule with

  Open Airport utility. Go to wireless setup using the menu of the button on the upper part of the Airport utility display window. Here, you can change what you need to change - the network name Wi - Fi and the new password. Click Update when finished.

• How many ethernet modem ports should have to support the airport Time Capsule

  I have a question: how many ethernet ports if a modem must support the airport Time Capsule?

  One (1)

• Parameter problem to the airport Time Capsule

  Already, we currently have a WiFi system with a NetGear router and a modem from Time Warner.

  I just want to use the airport Time Capsule to back up my Mac.  My husband has a PC.  I followed the instructions but the airport still comes up in the utility.

  Mac OS X El Capitan 10.11.6 and the latest 802.11 ac 3 TB so I don't know what I'm doing wrong.  I plug an Ethernet cable at the airport, then in the Modem - nothing after I plug the power - Amber flashing light.  I have changed ports unplugged and plugged back in French - restart the Modem.  Nothing works.  I bought it so it would work straight out of the box - so far, I have spent a lot of time trying to understand it.

  Any help would be so appreciated!

  Hello

  Try the help in this support article > Wifi hotspot: understand and resolve a blinking light of amber status - Apple supported

• Why didn't I go and turn my Airport Time Capsule to be able to backup?

  Hello.

  Why didn't I go and turn my Airport Time Capsule to be able to backup? It has been like this from day one. At the point where I keep my iMac off for a few days, my Time Capsule airport must be enabled and the new in order to save. Any suggestions?

  Concerning

  Simon

  Hello Ladro Maltese,

  Thank you for using communities of Apple Support.

  If I understand your message when you shut down your iMac a few days and then go back on you have to turn off your Time Capsule, then on again as well. I know how it is important for you to be able to have your Time Capsule works well. The first step that I recommend is to make sure that your Time Capsule firmware is up to date.

  This article includes information about how to manually and automatically check updates the firmware for your Time Capsule:

  Keep your base station to day.

  After updating the firmware see if the problem persists.

  Best regards

• Files of WD My Cloud Airport time capsule

  I use 2T WD My Cloud as a hard disk to backup to my MacBook Pro 13 "2.5 GHz Core i5. How can I do all of my WD My Cloud backup files, transfer to the airport time Capsule. So did anyone get an answer to this question?

  Copy and paste the sparsebundle Time Machine.

  But we do not recommend usually people do. It is much better to just start a new backup for the TC and the old backup on the WD mycloud until you build up a sufficient history... say 3 months on the TC... then you can wipe.

• Airport Time Capsule 2 TB blocking my internet access.

  I just bought a new airport Time Capsule 2 TB. When it is plugged in and running, I lose access to the internet! There is a wifi wireless in the House. What is the cause?

  There is a wifi wireless in the House. What is the cause?

  Potentially, Yes. Network Wi - Fi of the new Time Capsule can interfere with this other Wi - Fi router. What is the brand and model of the other device? What are your objectives of networking for the Time Capsule (TC)? In other words, do you want to expand the wireless of the other device, or create another Wi - Fi network, or something else?

• Need help with the implementation of a replacement airport Time Capsule

  Hi... Recognizing the help. My 1 TB airport Time Capsule (ATC) crashed and I bought a new 2 TB ATC to replace. In my preference system, Time Machine reflects that my ATC 1 TB is still active. How to pay safely my 2 new cases of tuberculosis ATC to replace the 1 TB ATC?

  Assuming that you 1. already connected the new TC on your network, and/or 2. you were able to save all data on TC 1 TB, or simply do not take care of him You can just open Time Machine preferences, turn the Time Machine off, and then select the disk in the new time Capsule. A brand-new first backup starts to run, and it will certainly take time.

  Another option is to connect the new TC on ethernet directly on your Mac and then select the Time Machine preferences, this will speed up the first backup.

  In case you were able to archive the old backup and transfer it to your new TC, you will continue your backup schedule by simply selecting the new TC in Time Machine preferences.

  I hope this helps.

• Is it possible to remote access to files on airport time capsule without a great second computer mac at home?

  Hello!

  I read the articles on access distance to another mac, but what I need is to remote access to files on airport time capsule without a great second computer mac at home.

  Only Mac... Mac you will use for remote access to files on the Time Capsule... is necessary.

  Set up and use Back to My Mac

• Time machine can finish no backup on airport time capsule

  Time machine can finish no backup on airport time capsule.

  explanation: there is no access to the/volumes/data-1/macbook diskcopiefile xxxx.sparsebundle that is used to back-up pro (error (null))

  The network failed to halfway through the backup.

  To resolve this problem, we need to know your complete network type.

  This modem do you have? Brand and model please.

  Who is your ISP? It is important for the IPv6 configuration.

  What model is the TC?

  What the configuration of TC in the network?

  How old is the MBP? If you have an ethernet port that you use it instead of wireless?

  Is this a first backup? Or were you works well for awhile and it's broken now?

• How long to zero 3 Tb airport Time Capsule?

  How long to reset the hard drive on an Airport Time Capsule to 3?

  One pass... 10-12 hours.

• My LAN airport Time Capsule 802.11ac began to abandon their studies on the Cox network.

  My local network that the internet began to abandon their studies in airport Time Capsule 802.11ac associated with my network of Cox. The green light stays on. Unplug it and plug it back bring it will return immediately.

  I disabled IPv6 on the suggestion of the counsel of COX because Cox and Apple have a problem with these capsules of time regarding IPv6 and IPv4 is supposed to work.

  It is a question of cox or should my time capsule service?

  This modem do you have? Brand and model please.

  It may be a contributing factor, where the transition to IPv6 is causing issues, but raised another problem.

  He has also reported a DNS issue... Please fix the DNS servers of your TC... (IPv6 is set to link-local now in your TC?) Assign the values google DNS and see if it improves things.