character input

Similar Questions

• Can not enter caps

  I have a BDP-S570 for Christmas. I have a wireless router that works very well. The network is not broadcast the name RITS, it must be manually typed without password. The problem is that the network name has capital letters in there. When I get to the screen to type the name of the remote network, yet there is no key to Cape TOWN. All I can do is put in the name of the network in lower case and it does not work.

  How should I enter caps with the remote control?

  Hi, I'm confused by that too, but the solution was simple. Go to the screen where you enter the characters of your password. In the lower right corner of the character input box, there is a box with "123" in there. Select the check box, and then press the 'OK' button (in the center of the cursor keys). This will change the character set. One of sets a uppercase (others have symbols, figures, etc.). Furthermore, the character input area resembles a keyboard phone for some reason, you can use the numeric keypad on the remote control to enter characters like you do on your mobile phone. I hope this helps.

• serial port error

  I have Labview read in 14 bytes at a time of the serial port. It works fine except if labview meets the 0x0A byte. If she meets this byte, then it stops in addition to the 14 reading bytes. Can someone explain why this could be? Thanks for any help.

  This is because you have not defined the character input allows the serial port to configure visa on false arrest. As you can see, the default termination character is 0x0A.

• Create account dialog

  I want a dialog box to create an account. The dialogue window closest to you, that I found for this is the change password dialog box, the only problem with that is that I can not change a character input boxes do not hide. Any ideas?

  Thank you.

  You will need to create your own then.

• How to use the Chinese on-screen keyboard?

  How you press 'shift' using Windows 7 on-screen keyboard?  I don't want to press shift + a few other keys.  I just need to press on and release the SHIFT key.  It doesn't seem to be a way to do.

  We develop a kiosk-app with Windows Embedded Standard 7, and we support the Chinese input.  With the keyboard for Chinese, the user must press shift to the left to switch between the input of Chinese characters and the English character input.  But it seems not possible to press SHIFT using the on-screen keyboard.  If you click on the SHIFT key, it displays the key as inactive, but shift is not really pushed.  You click another button, and then it sends shift + that key.  But will not activate the input Chinese.  You have to press shift with no key down.

  This limitation seems to make it impossible to enter the Chinese with the on-screen keyboard.  Is it possible to do?

  Hi Moby,

  The question you posted would be better suited in the MSDN Forums since we have dedicated to this support; We recommend that you post your question in the MSDN Forums to get help:

  http://social.msdn.Microsoft.com/forums/en-us/WinForms/threads

  Keep us informed on the status of the issue.

• selection remains after the removal of the text, unexpected text now selected

  DW 13.2 build 6466

  Mac OS X 10.9.3

  Repro: select characters or lines of text.  (JS, CSS, HTML) content type is not relevant.  Delete the text.

  Expected: deleted text, without the selected text.

  Real: deleted text, remains of selection, but with the new selected text (selection not deleted).

  Result: Deleted unexpected text (equal to the size of the selection).

  No matter if I delete the text, and then type a character or just type a character to replace the selected text.   I always lose the removed part, and character input replaces the new text (incorrectly).

  This isn't the bug "my selected text was deleted.

  I tried:

  • deactivation of the voice/dication
  • reset
  • rebuild the site cache
  • deletion of the user configuration files
  • hit his head on the table.

  any suggestions are appreciated...

  Thank you

  Michael

  This is me!!!  ... lazy new user trackpad!

  (1) select text with lazy 3 fingers.

  (2) KEEP lazy fingers on the trackpad while pasting or typing

  (3) now - replaced text not desired to get selected, resulting in head banging on the table.

  solved!

• ORA-01461: can bind to a LONG value only for insert into a LONG column

  Hello
  
  Oracle XE on RHE dedicated server
  

  create table cvDetails(
  cd_id number(14) primary key,
  cv_id number(14) constraint education_fk references CvProperties(cv_id),
  nationality varchar2(230),
  objectives varchar2(3900),
  name varchar2(230),
  fatherName varchar2(230),
  motherName varchar2(230),
  dob varchar2(230),
  gender varchar2(230),
  mStatus varchar2(230),
  passportNo varchar2(110),
  email varchar2(230),
  phone varchar2(45),
  mobile varchar2(25),
  address varchar2(2500),
  state varchar2(230),
  zipCode varchar2(230),
  city varchar2(230),
  education clob,
  experience clob,
  skills clob,
  languages varchar2(1400),
  hobbies varchar2(3200),
  achievements varchar2(3900),
  references varchar2(3900)
  );
  
  create sequence cvDetails_seq
  start with 1 increment by 1;
  
  create or replace trigger cvDetails_trig
  before insert on cvDetails
  referencing new as new
  for each row
  begin 
  select cvDetails_seq.nextval into :new.cd_id from dual;
  end;
  /

  Why do I get the error of subject?
  
  Thank you in anticipation

  >
  in any case, I checked manually according to your instructions and found that this objective column is of character input more than specified.
  >
  Glad you found the problem, but I hope that you learned a lesson that is time consuming.

  It must be remembered that we have no access to your environment. If we do not know which servers, clients, tables and users that you use.
  It may seem simple to you but doesn't realize that you provide us with two slightly different versions of the cvDetails table.

  The original post had this
  >
  objectives varchar2 (3900).
  >
  But when you have provided your 'cvDetails desc' journal text has
  >
  OBJECTIVES VARCHAR2 (3950)
  >
  It is the same table that you started with how the column suddenly grow 50 bytes?
  This means that you did from different parts of the present in the two schemas or on two servers or you change the table between the two.

  You can't address properly when you do this. By chance it is the column that you said is now the problem.
  In SQL, the maximum length of a VARCHAR2 is 4000 bytes; no characters but bytes. Nothing more than 4000 bytes would probably be a LONG in the generic sense.

  If your error
  >
  Re: ORA-01461: can bind to a LONG value only for insert into a LONG column
  >
  means that you try to 'bind a LONG value' to a column VARCHAR2 and you can't you can 'bind a LONG value only for insert in a LONG column.

  In the proper context, the error makes sense.

  You probably have a problem with

   ps.setString(2,  objectives);
  

  because the 'objectives' has a length of more than 4000 bytes.

  Remember this answer from you?
  >
  I have read and found that there may be a problem with the driver JDBC or Characterset. Am I wrong?
  >
  The 'Hello' ASCII string is five characters and five bytes because the ASCII code is a set of characters in a single byte. The same string internally in Java is five characters but ten bytes because Java uses UTF16.

  So, if the character set of the data itself is double-byte character set then anything more than 2000 characters (4000 bytes) is a "LONG". And if your column is defined as VARCHAR2 (3950), which means bytes a doublel-byte character set which are characters of 1975.

  Then you said in a response later
  >
  I checked by the SNA Server and oracle that are both of the same but new thing I found is that oracle does not allow more than one clob column in a table. Is this true?
  >
  Somehow a hypothesis has crept it that the problem was not a driver JDBC or Charaterset, but because you can not have more than one clob column in a table.

  You could have easily tested for yourself by doing what P. Forstmann - tried to create a table and see.

  Then you completely ignored my advice
  >
  I suggest to you isolate the columns actually causing the problem.
  Change your code to insert only a few columns. When it works, add more than a few columns.
  This will then tell you which column or the columns are at the origin of the problem.
  Display the results once you determine a column that causes the error.
  >
  When you have finally made the simplest things, you have found what was causing the problem almost immediately.

  Many times you don't need 'experts' - you must use a rigorous, methodical, process step by step.

  ALWAYS, ALWAYS, ALWAYS reduce the simplest possible code example that illustrates the problem.
  If you had followed this a rule would have probably found you the problem and makes you look like the 'expert '.

  There are no shortcuts.

• HR HTML 9.02 and Source Control 3.1 will not save files in design mode, only the HTML view.

  We use RoboHelp 9.02 (just 9 and charged the next day so up-to-date, we 9,02) and Robo Source Control 3.1 and when we check a file and change the file, we can not save the file in Design view.  If we click on the HTML mode, we can save the file.  We have reproduced this on multiple files at the same time our computers accessing the server.  Now using RoboHelp HTML on a local project is functioning normally, only when we have access to the files on the server we select the HTML mode in order to save the topic.

  While this is an acceptable work around short term, we need this bug to get fixed unless someone knows of a checkbox somewhere that we must check in design mode to record and studied.

  I will be happy to provide you with any input and or test the additional fixes to help to fix this bug.  It is completely reproducible and constant on all tested subjects.  Source code control works insofar as this case the subject is verified by one the other cannot access the topic.  Once the topic is saved in HTML, then the subject can be archived and changes are visible by the other author.

  After the installation of Robo 9, Adobe Acrobat Professional 8 has been removed from the computer and MS Word 2000 did not work.  I've upgraded to Office/Word 2003 and I can now use Word 2003.  I have not attempted to reload Acrobat yet but that is next on my list.  Acrobat Professional was removed from these two computers during the installation.  Word 2000 exists only on the laptop.  I was in the queue to get updated later in the year, so they gave me a key and Word 03 seems to operate normally.  Did not check the Excel or PowerPoint 2000.

  Other news, you may be interested to know:

  • Both computers use Windows XP.
  • Both have office 2003.  -C' is because Word 2000 stopped working when Robo 9 has been installed.
  • Both have with max memory 32-bit operating systems.
  • Both have multiple monitors.
  • One is a laptop, the other is a desktop computer.
  • Both computers had 8.02 Robo? but RH8 was uninstalled before installing RH9.
  • 3.1 source code control has not been reinstalled on the server since version was the same that came with RH9
  • Source control has been reinstalled as a step of troubleshooting on the laptop without change.
  • RSO3 middle-tier service is running on all 3 computers and RSO3 server runs on the server pc.
  • Two users have administrator rights so all of the checkboxes are checked for access and control.

  Kind regards

  DV

  Having identified some problems in our global variable file in another project, I had a look at this project and found a few variables were empty, have a mystery character input or information applied to the variable fonts.  Rather than change back the variable only one digit or a character with no set form and text input in variables of the virgins, I deleted the unused variables of the project that just happened to 99% of the variables because we divided this part of the project in a booth along the project.  Remove the variables solved the problem where we had to switch from Design view to HTML view in order to save a topic.  I find this rather strange since none of the topics referenced stray variables.  Now we have only the variable of the version that refers to all subjects in the foot.  Everything seems to work fine now.  If you encounter this problem, have a good look at your file of global variables, line by line, to see if there is something other than text or numbers and delete everything except for the text.

  DV

• AF:autoSuggestBehavior in af:inpuptText of postbacks problem w / BACKSPACE key

  Hi all, I am new to ADF and need help with workaround for this problem. Basically, when I try to use the af op: autoSuggestBehavior in the af:inpuptText component it seems that after you enter two characters, one at a time with the break between the two (for example, where the first character is of ' brings back all of the suggested items 10, and the second character is 'y' which narrows down to a single proposed item) and then clicking the BACKSPACE key once to get rid of the last character input the return key back does not initiate the postbacks so the result set of suggested elements never refreshes and remains at 1 instead of back to 10. Here are snippets of my BackingBean and the jspx page. Any help would be greatly appreciated.
  
  
  JDev Build: JDEVADF_11.1.1.2.0_GENERIC_091029.2229.5536
  
  = BackingBean.java
  Overview;
  
  import java.util.ArrayList;
  import java.util.List;
  
  javax.faces.component.UIComponent import;
  Import javax.faces.context.FacesContext;
  Import javax.faces.model.SelectItem;
  
  public class BackingBean {}
  
  private list < SelectItem > suggestions = new ArrayList < SelectItem > ();
  
  public BackingBean() {}
  Super();
  
  initialize the list of choices
  suggestions. Add (new SelectItem("Sydney"));
  suggestions. Add (new SelectItem ("Melbourne"));
  suggestions. Add (new SelectItem ("Singapore"));
  suggestions. Add (new SelectItem ("Tokyo"));
  suggestions. Add (new SelectItem ("Beijing"));
  suggestions. Add (new SelectItem ("San Francisco"));
  suggestions. Add (new SelectItem ("New York"));
  suggestions. Add (new SelectItem ("Houston"));
  suggestions. Add (new SelectItem ("Seattle"));
  suggestions. Add (new SelectItem ("London"));
  suggestions. Add (new SelectItem ("Paris"));
  suggestions. Add (new SelectItem ("El Cajon"));
  suggestions. Add (new SelectItem ("Palo Alto"));
  suggestions. Add (new SelectItem ("Dunsmuir"));
  suggestions. Add (new SelectItem ("Eastvale"));
  suggestions. Add (new SelectItem ("Dublin"));
  suggestions. Add (new SelectItem("Duarte"));
  suggestions. Add (new SelectItem ("Downey"));
  suggestions. Add (new SelectItem ("Hayward"));
  suggestions. Add (new SelectItem ("Hemet"));
  suggestions. Add (new SelectItem ("Hercules"));
  suggestions. Add (new SelectItem ("Hesperia"));
  suggestions. Add (new SelectItem ("Gilroy"));
  suggestions. Add (new SelectItem ("Galt"));
  suggestions. Add (new SelectItem ("Glendora"));
  suggestions. Add (new SelectItem ("Goleta"));
  }
  
  public list getSuggestions (string input) {}
  
  create a new list to contain no matching items
  List < SelectItem > items = new ArrayList < SelectItem > ();
  
  Scroll through the list of suggestions
  for (SelectItem point: suggestions) {}
  check if each element contains the input string
  Convert them to upper case, a case-insensitive comparison
  If (item.getLabel () .toUpperCase () .contains (input.toUpperCase ())) {}
  If the element contains our input string, add it to our list of matching items
  Items.Add ("Item");
  }
  }
  
  return the matching items
  to return elements;
  }
  
  public list getSuggestionsThatStartWith (string input) {}
  
  create a new list to contain no matching items
  List < SelectItem > items = new ArrayList < SelectItem > ();
  
  Scroll through the list of suggestions
  for (SelectItem point: suggestions) {}
  Convert them to upper case, a case-insensitive comparison
  Check if the point of starting with our input string, add it to our list of matching items
  If (item.getLabel () .toUpperCase () .startsWith (input.toUpperCase ())) {}
  Items.Add ("Item");
  }
  }
  
  return the matching items
  to return elements;
  }
  
  
  public void it3_validator (FacesContext facesContext,
  UIComponent uIComponent object object) {}
  Add the code in the event here...
  }
  }
  
  = MyPage.JSPX
  
  <? XML version = "1.0" encoding = "windows-1252'?" " >
  < jsp:root xmlns:jsp = "http://java.sun.com/JSP/Page" version = "2.1";
  xmlns:f = "http://java.sun.com/jsf/core".
  xmlns:h = "http://java.sun.com/jsf/html".
  xmlns:af = "http://xmlns.oracle.com/adf/faces/rich" >
  < jsp:directive.page contentType = text/html"; charset = windows-1252 "/ >
  < f: view >
  < af:document id = "d1" >
  < af:form id = "f1" >
  < af:panelGroupLayout layout = "scroll".
  xmlns:af = "http://xmlns.oracle.com/adf/faces/rich".
  ID = "pgl1" >
  < af:panelSplitter id = "ps3" splitterPosition = "142".
  orientation = "vertical" >
  < f: facet = 'first' name >
  < af:panelBox text = "Of the ADF AutoSuggestBehavior (Contains)" id = "pb2.
  Type = "stretch" >
  < name f: facet = "toolbar" / >
  < af:inputText label = 'City' id = 'it3.
  Validator = "#{BackingBean.it3_validator} '"
  autoSubmit = "true" >
  < af:autoSuggestBehavior suggestedItems = "#{BackingBean.getSuggestions}" / >
  < / af:inputText >
  < / af:panelBox >
  < / f: facet >
  < f: facet 'second' = name >
  < af:panelBox text = "of the ADF AutoSuggestBehavior (StartsWith).
  ID = "pb3" type = "stretch" >
  < name f: facet = "toolbar" / >
  < af:inputText label = "City" id = "it4.
  Validator = "#{BackingBean.it3_validator} '"
  autoSubmit = "true" >
  < af:autoSuggestBehavior suggestedItems = "#{BackingBean.getSuggestionsThatStartWith}" / >
  < / af:inputText >
  < / af:panelBox >
  < / f: facet >
  < / af:panelSplitter >
  < / af:panelGroupLayout >
  < / af:form >
  < / af:document >
  < / f: view >
  <!--oracle-jdev-comment:preferred-managed-bean-name:BackingBean-->
  < / jsp:root >
  =====================================================

  Hello

  I created SR 3-2230550051 yesterday for that matter because I have the same problem.
  The problem seems to be associated with IE7. With Firefox, the BACKSPACE key works as expected.

  @Shay: this issue is reproducible too with Oracle and IE7 components demo.
  (http://jdevadf.oracle.com/adf-richclient-demo/components/autoSuggestBehavior.jspx)

  concerning
  Peter

• Question about the use of SQLLDR to load a date column in a new format.

  Hello.
  
  I'm having a problem using SQLLDR which is really starting to annoy me. We are running Oracle 10.2.0.4 and I am trying to load the data into a flat file generated by Excel in using SQLLDR table. The problem I have is that the date in the flat file column is in the format: DD/MM/YYYY and the user wants the data to be in format: YYYYMM
  
  Here's a copy of my control file:
  
  DOWNLOAD THE DATA
  INFILE 'c:\temp\DESKTOP_DATA.txt '.
  ADD
  IN THE OPCTI TABLE. PERF_LEVEL
  FIELDS TERMINATED BY "" "
  trailing nullcols
  (CUSIP,
  DATE_AS_OF ' TO_DATE (: DATE_AS_OF, 'YYYYMM'). "
  ONE_MO_DELINQ_30_59,
  ONE_MO_DELINQ_60_PLUS,
  ONE_MO_BANKRUPT_RATE,
  ONE_MO_FORECLOSURE_RATE,
  ONE_MO_REO_RATE,
  ONE_MO_DELINQ_60_89,
  ONE_MO_PRIN_RECOVERY,
  ONE_MO_PRIN_LIQ,
  ONE_MO_COLLAT_BAL,
  CURRENT_CREDIT_SUPPORT,
  ONE_MO_CDR
  )
  
  And when I call SQLLDR, I get the following message:
  
  Sheet 1: Rejected - error on the OPTCI table. PERF_LEVEL, the DATE_AS_OF column.
  ORA-01858: a non-digit character was found here where was waiting for a digital
  
  Any idea on what I'm missing? When I started, it seemed to be quite simple.
  
  Thank you!

  so you want to take the character input, convert it to a date and then convert back to a different character format.

  Select to_char (to_date (12 November 09 ',' MM/DD/YY '), "YYYYMM") twice;

  200911

  Try something like that.

• control of the input string to the character to character upcase?

  Is there a property or method in chain control who can change the input character upcase character?

  Try the attached VI.

  Edit: Make sure that the update while typing of property is selected.

• Delete the last character in the input field

  How to remove the last character of an input field?

  It deletes all

  When you click on:

  SYM.$("textfield"). Empty();

  Thank you!

  Try this:

  var inputTxt = sym.$("textfield").text ();

  var truncatedTxt = inputTxt.slice (0, -1);

  SYM.$("textfield"). Text (truncatedTxt);

  HTH,

  Vivekuma

• Length of the string, excluding the input character/string

  Long story short, I want to replicate the function of the length of the string , but do not include an input the number of characters in string. For example:

  The input string (search) is 'the

  My first string to test is "the big red dog."

  That would mean a 13 string length.

  My second string is "Jumps over the lazy Fox."

  That would mean a length of 21.

  ' Hello World! ' would return 12.

  'The Lion, the Witch and the wardrobe' would return 26.

  I hope that you can see what I want to achieve. How is this possible?

  -James

  (I'm driving Labview 8.5)

  Use the search and replace the string to replace your 'exclusive' with an empty string string.  Use the length of the string on the result string.  Make sure that everything is already set to TRUE.

  

• text input - character limit

  Hello. I have an input textfield that is say 100 px width. Is it possible to limit the number of characters so that they fit in the field. I don't want to use maxChars since I want to use the end of the whole field different characters has different width.
  
  Hope you understand what I mean.
  
  / Antewik

  You can use the TextFormat.GetTextExtent method to get the width of a string given for certain a textformat. Compare that with the textfield width and disable the entry if it reaches the limit.

  see you soon,
  blemmo

• Control of the enum erzeugt eine input EIB less character eine dritten instead of the Beibehalts, less Zeiches

  Ein Versuch beim less indication als text in ein control Enum erzeugt LV 8.5 ein grauschattiertes Feld einzutragen.

  ICH möchte aber das less '-' Enum ID haben als.

  Die einfachste Lösung ist ein Leerzeichen voranzustellen. Damit die Elemente sind auch bei den Prioritaten ein Leerzeichen voranstellen other possibly untereinander.