Characterization of FET.

Similar Questions

• 6221 2182 A to draw IV of FET

  My teacher asked me to do a program to measure the IV of a FET to 6221 (source/scan current) and 2182A (to measure the voltage). We use these instruments as the device is made of very delicate material and can support current under 100nA extended, which means that the voltage across the device will be very very low (where using 2182 has Nanovoltmeter to measure blood pressure)...

  After the measurement, I want to draw IV.

  I can program the 6221 to sweep, but I can't the 2182A to measure the voltage to measure the progress of scanning. The problem is that I can't have the trigger to work. (I use GPIB card for connectivity between the equipment no RS-232 cable). Also I'm not using delta, delta pulse or conductance mode. I need the 6221 at source and release trigger and the 2182A measure and send a trigger that will change the level of the source of 6221.

  Anyone know how I can accomplish this... Source 6221... 2182 has... Mark IV after the measurement.

  A more general question is what buffer instrument will save my result. I mean the 2182 is were my only measure or have this level of source and extent or be the 6221?

  Any help will be appreciated...

  Thank you

  I agree, a lot of improvements make your program better.

  First of all, why not use the instrumentdrivers available for these instruments.

  These drivers are not perfect, but help focus you on your real problem.

  And another note, first of all. If you have wires connected between vi you have more a frame of the sequence.

  This is called the sequencing of wiring and is much less disturbing than the images in the sequence.

  And it already works...

• characterization of iv of LabVIEW

  Hello

  I'm writing a LabVIEW 8.5 program to complete I - V characterization on PV modules. I know I have seen a toolkit OR to this before, but now I can only find a version for LabVIEW 8.6.

  Anyone know where I can find a tollkit for LabVIEW 8.5, or any other code in the example or help with this?

  Clara

  Try these.

• 40g of Cisco Nexus-FET

  I'm trying to choose the right cable to connect to a Cisco Nexus 40 G - FET (on a Nexus 6004). I saw on Cisco's Web site that says the FET transceiver has 12 fibres inside. Yet, when he broke out to connect to four FETs of 10G on a FEX (2232TM-E), only 8 fibers would be used.

  so... What type of connector DFO buy? A 12 FTU fiber or fiber 8 FTU? Are they interchangeable? I might as well use an 8 or a connector DFO 12 fiber on my fan-out cable?

  Cisco uses 8 fiber lit even if standard DFO is of 12 fibers. Please refer to Figure 23 here.

  As described further down in this document (figures 25 and 26) some (cited Corning) providers offer only fiber 8 DFO and which can be used for interconnection as well.

• Cable passive to connect the FET - 40 G and FET - 10 G

  Hello

  I'll get right to the subject. The Cisco Nexus 2348TQ have an affair rising SKU N2K-F40G-F10G option, which consists of the following:

  TRANSMITTER-RECEIVER 2xFET - 40G (with DFO-12 connector)

  TRANSMITTER-RECEIVER 8xFET - 10G (with LC connector)

  Maybe we could assume that there should be two "male 1xMPO12 > female 4xLC" passive extension cable included in the package, but the tricky part is that there is no included cable, and I am unable to find any mentions of these objects being available to Cisco.

  The question itself is if the cisco have these available passive extension cables and if yes - what are their credentials?

  Halp? Please? It makes me crazy already...

  Yes, that's correct.

• Help me fet on my account. Norma Ávila * address email is removed from the privacy *.

  somehow, I was told my account has been changed, it wasn't plese help not to revert to my account - norma Ávila - * address email is removed from the privacy *.

  Hi, Norma.

  I suggest that you post the question on the Forum Windows Live Hotmail, because the problem is with Windows Live Hotmail.

  http://answers.Microsoft.com/en-us/windowslive/Forum/mail

• I have hsve msn email on my laptop and on my RT of Surface. FET emails are not insync or I do not receive the email in my area that I receive on my laptop. Please notify.

  My email on my laptop at home is not synchronized with the enamel on my RT. surface. Please notify.

  Celia Wu

  MSN mail, I believe, was supposed to have been passed to Outlook.com.  Go to http://www.outlook.com and open a session with your MSN account and you can find all your emails it with your contacts.  If they are, on your Surface RT use IE10 to record on Outlook.com and "pin" in your START screen.

  If you do, and it works, the two machines will look at the same exact account and all the emails you receive will be there.

  Microsoft has eliminated Hotmail and I just watched on the MSN home page and the E-mail link is no longer there, so MSN e-mail accounts may have been moved as well.  If they did not move the account, everything is supposed to have been transferred, and you always use your same login and e-mail as before.

  Your contacts on Outlook.com are found by clicking on the arrow down beside the title "Outlook" and click on the application of 'People '.

• Archive utility: temporary folder?

  Hello

  Where is the "temporary folder" when 'extraction' of an archive using the utility to archive Mac?

  The archiving utility not always use same folder of temporary mining, say, for example during extraction of a file on a network share? I had a problem when extracting large .zip files, the archive utility is crushed, where temporary files extracted would possibly clean?

  Thanks for all the answers,

  Joe

  Look in these folders at the root of the drive...

  /private/tmp/private/var /var

  I doubr rge file temp help, I would try FET Unarchiver...

  http://Wakaba.C3.CX/s/apps/Unarchiver

• All my docements now lacking at web pages firefox how to undo this?

  I reloaded firefox after having problems with my printer access.

  Now all my documents on my computer except for word and great have been converted into web pages "Firefox". This creates problems when I need to edit, print, and distribute my files especially if I use a site PTF or "dropbox".

  Can you give me advice on how to block the automatic default value?

  Very appreciated

  Gary

  Hi Gary, Firefox 31 and 32 are designed for themselves added as an extra Viewer for PDF files, but on some systems, the characterization of the PDFs also is changed accidentally.

  This approach was proposed by a user in another thread:

  1. Open Adobe Reader
  2. Edition-> Preferences
  3. In the categories column, click "General".
  4. At the bottom of the page, click on the button marked «Select default PDF Handler»
  5. In the dialog box, select 'Adobe Reader XI' and click 'apply '.
  6. A Configuration of Windows screen. Let him do his thing (takes a few minutes), and then restart your computer when you are prompted.

  Which solves the problem for you?

• How Amazon smart search restarted my computer and how do I prevent it?

  Amazon smart search has not only taken over Firefox, but Google Chrome and IE. I tried to uninstall anything Amazon other than the Kindle reader, that was installed several weeks ago. It didn't happen immediately after that I installed Firefox. I was looking for some cleaners, PC, accession and pilot, but read carefully and don't have a clue how Smart Search resumed. I am really upset at Amazon and will let them know. In the meantime, I have to remove my other two engines. I did the method a bit 'dangerous' to remove Firefox. This cannot be the forum for how make it off my computer, but if someone has any ideas of how do not enter in this situation again, I would appreciate your comments.

  For anyone to see this question, the answer was found by Googling the question.

  Amazon smart search has been characterized by some as a virus, and I agree with this characterization. Anything that takes over a part of my computer without my permission and on top that takes several hours to get rid of is a virus. On the side of the lessor, it is called a PUPPY, can not remember what represents the first P, but basically it is an unwanted program (TOP).

  Amazon smart search comes with other free programs. More successful you will be asked if you want. I read very carefully and all the programs that seem interesting that I'm not familiar with, including the review of research on the Internet. I do not think I accepted this, considering the articles about it, but not sure. It is worth noting that this is not always asked and it downloads just with the program you're after.

  Anyway, there is no excuse for not having an uninstall program that removes all) (*) (& (& _ program and all its parts.))

  I tried following some of the manual suggestion in the article that I found. He has been to remove settings personal and just hard to follow. After three hours, in total annihilation, I examined the malicious software on the Internet. Can't find any bad reviews and downloaded their free version. It has not only removed what was left of Amazon smart search, but another PUPPY I was working to get rid of. Then on top of that, all of my personal preferences in windows has been restored. I got my computer back once again. The relief was immense.

  I did the full scan which took more than an hour. I'm sure there are other similar programs that could be used and just trying to give my experience, do not sell malware.

  The response to prevention, it is not download any freeware. Not an acceptable solution for me. Carefully read all the fine print, it is always a necessity.

  I've seen items that Amazon has done this for some time in 2013. I'm still mad that they designed something that stole 3-4 hours of my life. They should not be able to get by. It is now high time for social action.

• How can I avoid firefox reset my browser preferences when my antivirus software scans my computer

  Starting on 19/02/2013 every time that my antivirus software scans my computer (per day), various Firefox browser preferences are being reset. (It seems that Firefox can be reset to the default value.) My home page is reset to mozilla etc...

  I have reset Firefox, un-installed and re-installed Firefox to no avail.
  Each time the computer is scanned my browser preferences are lost.
  

  The following information system:
  Windows 7 pro 64-bit
  AVG antivirus 2013 current build.

  Firefox v19.
  

  I don't remember anyone to another report that AVG has done this. In fact, it would be useful to know exactly what did AVG. Your home page is stored in a file named prefs.js in your personal settings Firefox (your Firefox profile folder). It deletes this file? Replacement of a 'clean' copy it right? He characterizes the read-only file so that your changes are not saved between sessions?

  Could you make a backup copy of your profile folder if you have around comparison after running the analysis? You will need to store on a USB key and it is not be analyzed, too.

  To access this folder, you can use

  Help > troubleshooting information > "view file" button.

  Navigate from one level to Ctrl + drag the folder to the destination of the copy.

• Is - slow down Firefox Sync, editing the bookmark library?

  Since I started using Firefox Sync, I noticed only edition or organize my library of bookmark has become slow or lazy.
  Characterizes this synchronization behavior? Or...
  I'm having a problem unrelated?

  Thanks for the reply,
  Bryan

  It is possible.
  
  We have seen other reports that Firefox is trying to synchronize bookmarks changes too quickly.
  
  You can try to exclude bookmarks in sync to see if that helps.

• HP10 1901 Tablet: Tablet 10 1901 hp stops immediately after the start, despite the load fully

  Hello

  My hp 10 Tablet has less than two years, and I don't use much.  The problem started with the volume suddenly down to zero out of control, and even if I press the volume up button, the volume is just down once again, when I let the button.  And then the Tablet has started to close automatically, even when it has a lot of power left, as more than 50%.  Now, even if I have fully charged, when I press the power, immediately after the start, it says, 'stop' and he just stops.  I try to turn it on again, and the same story is repeated.  I'm just fet upward.  What is a mechanical problem or a software problem?  I don't understand.  Please help me.

  Hello and welcome to the HP support community!

  It is difficult on this side of the screen of remote diagnosis your problems!

  You should try to eliminate the causes of the problem.  Only thing we recommend is to first try a Factory Reset.  It recharges a clean copy of the OS.  If she solves problems, then you're done!

  If problems persist or get worse, then it is probably related to the material.  Damaged the volume button, USB port, due to lack of battery, etc.

  Perform a factory reset on your tablet.

  WyreNut

• Scanner only works on some computers

  I recently bought a Canon LiDE 220 scanner which is supported by El Capitan according to apple of supported scanners page, but whenever I try to scan on my computer it says "Scanner reported an error. Cannot communicate with scanner ". I installed the Canon software before you try to analyze, and I wonder if that's a problem because it works on two MacBook Pro (Non-retina display) without the Canon software. I restored my computer from a time machine backup I made before I installed the software, and I still had no luck. Any ideas?

  So in summary:

  Does not work on MacBook Pro (Retina Display) OS X El Captain with or without software and drivers from Canon.

  Does it work on MacBook Pro OS X El Captian without Canon software.

  I tried to use a snippet, page printers and preferences system, Capture of Image Scanners and scanner Canon proprietary application all to nothing done.

  Has anyone run into this or know why it works on some computers, but not mine? I love a fix or work around.

  Thanks in advance

  Hello Mos Fett,

  Welcome to Apple Support communities.

  Looks like one of your MacBook Pro has a communication problem with your scanner, and you have tested the device with multiple applications and drivers.  If you haven't already done so, try to run through the printer General troubleshooting tips in the article below.

  Get help to solve the problems of printer on your Mac - Apple Support

  If you have another question of impression

  These steps may resolve with no other obvious cause printing problems:

  1. Open the Printers & Scanners System Preferencespane, then select your printer and click the minus (-) to remove the printer from the list.
  2. Follow the steps described in the previous section to add your printer.
  3. If the problem persists, reset the printing system, then follow the steps in the previous section once more.

  If the issue is not resolved, these final measures to avoid that any currently installed printer drivers:

  1. Reset the printing system again.
  2. Rename the file to/Library/Printers:
     • From the Finder, choose go > go to folder. Then type /Library and then click OK.
     • Click once on the back of the printer to select, and then press ENTER to start to rename the folder. Type Printers-old , and then press ENTER to save the new name.
  3. Follow the steps in the previous section once more.

  If the problem persists, you can use the information in this article to further isolate and solve the problem:

  Insulation in Mac OS X - Apple support questions

  See you soon.

• IOS 9.2.1 broke the accuracy of the touch screen

  After my upgrade to 9.2.1 the precision of touch screen makes the phone almost useless.  I can not type accurately and cannot even open the applications I want without having to open other applications.

  When I lock the screen and then unlock it seems to fix the precision of touch screen for about 10 seconds, then it will return the incorrect touch screen.

  Another question, I noticed is 2 white vertical lines that appear in the home screen randomly, but when I lock screen is not there... so I'm glad this isn't HW issue.

  This started last night after being upgraded to IOS 9.2.1

  someone at - it solutions on it?

  Reset. Restoration. Restore as new.

  Those who characterize the troubleshooting steps. I have no problem with the precision of touch screen, nor anyone I know.

  Your description of the "white lines", would seem to indicate corruption of iOS, in which case a restore should fix the problem, or a display failed.