Charge connector needs to be waved to load
iPhone 6: recently my iPhone 6 do not get loaded when I connect my iPhone to the charger cable. Is there a specific position in which I need to connect my iPhone to charge him. I tried different cables but without success?
Now to be sure I used the new cable supplied with this new iPad Pro to make sure it isn't a cable problem. It degrades is there anything short of taking in an Apple Store I can do myself I spritzed with air retains no efect as well
So what can we do at my end?
There are two possibilities, if you eliminated the cable (it doesn't happen with other devices):
- There are dirt Pocket lint or other cruft in the connector on the phone which prevents the cable from seating properly. It is the response of '' good news. '' If you clean the connector with a bright light and a probe not of metal (for example, a toothpick) it should solve the problem. Even a little dirt can cause a problem so get spotlessly clean.
- The bad news; the connector has a broken PIN or other damage. Apple has no solution for this if the phone is out of warranty, except a replacement at a reduced price. If it is under warranty, they will replace the phone. The replacement price of the package for any iPhone 6 is $ 299 in the United States, the price in other comparable countries.
Tags: iPhone
Similar Questions
-
I just upgraded to the latest version of Firefox and noticed that there doesn't seem to be a way to stop loading completely while he is in the process of loading a page. Older versions had this feature and I use it often. One site in particular that I deal with on a daily basis, has tons of advertising which can sometimes take forever to load, while making my every move unnecessary. I found that by stopping the entered page EQUIPPED does not affect the parts of the page that I had to do what I had to do, in other words, all the information that I needed the list of my articles were there long before all responsible ads. So rather than wait a minute or two, while the ads all charges, I could click on 'stop' and then do my work. Maybe I'm just missing where this feature is? I should mention that I have really problems to this place but I use it every day. For any help or suggestion would be greatly appreciated. Thank you for your time:
DennyI suggest an anti-ad like Adblock Edge addon
-
I need flex sdk 4 do load data file
Looks like I need flex sdk 4 to do the loading of the data file as seen on the following thread:
http://forums.Adobe.com/thread/510429?TSTART=0
Hi, I'm now trying to use the new features of file Flash 10 but I get this error when I try something like
fileRef.load ();
ReferenceError: Error #1069: charge of property not found on the flash.net.FileReference and there is no default value.The "require flash player version" also in Flex Builder setting change your build configuration. Specifically, it changes the version of playerglobal.swc is included in your compilation.
If you do not want to change then you need to make this change manually in order to take advantage of the features of Flash Player 10.
-
Not charging with cell phones but computers to load adapter
Hello
I have iPhone 6 more. I am having some problems. My phone will not charge with laptops, computers desktop or Mac Book. But she sees a power adapter. I tested with another official cable and also does not work. I tunes sync also does not work.
Please help me solve this problem.
Thank you
Hello Win Htut Aung,
I understand that you have had problems of load on several different computers and I want to help you get the issue resolved and isolated. Just for you help determine the cause could you let us know if your devices are still perceived by your computers, USB devices or iTunes?
If not you can try the steps outlined in this article: If iTunes does not your iPad, iPhone or iPod
If the problem persists, let us know. The entire community is here to help.
Best regards -
I tried to charge my iphone 4s, but has not loaded
Hello! A few days ago, I tried to charge my iphone 4s, but not loaded, it helps has completely downloaded, and now I no longer use I already changed the plug and the cable USB but nothing. What could I do? Thank you and I await answers
< re-titled by host >
It could be the port on the phone itself which is damaged or dirty, you can try to clean if there is visible debris, the best option would be to send it to Apple for review as self-cleaning can cause further damage.
-
Since a recent automatic update, I was not able to print by clicking on the firefox tab icon. I have pages that I need to print, that do not load with the toolbar complete with the key of menu etc. I could always print by clicking on the icon, but no more. Help please.
you could try pressing and use 'ctrl' then 'P' on your keyboard
We also write 'ctrl + P', it's the printing system wide combination of shortcut keys.Alternatively, you can try, right-click in the title bar (where your loading tabs) and selecting 'Menu Bar', which will show the menu bar (with file, editing, display, etc.) on the tabs allowing you to print from the submenu file
hope that helps!
See you soon
-
My Apple Watch doesn't work despite the charge. Need help!
MY Apple Watch feeds not on despite the load? Need help!
Have you tried to force the reboot of the Apple Watch?
Forcing Apple Watch to restart: press and hold the side button and the digital Crown at the same time for at least ten seconds, until the Apple logo appears.
-
I need to display the CPU load of the controller under Veristand real-time on a copycat.
But one did not find a canal system (or equivalent) with these data.
I have a controller with 8 processor cores (RMC8355), so I need to have the CPU 8 charges.
Does anyone have a solution?
Thank you
The custom device available on the addons page System Monitor will allow you to get this information and much more than the tracks in your system definition.
-
Can I use charger property on a main sequence to load the properties in the subsequence?
Hi, I tried to use the shipper of the property to load limits and variabels local values in subsequences of the main sequence.
I can export all properties for my main sequence and all subsequences in the export function within selecing
. When I try to load the file exported by using the property loader I get different errors depending on the format, with that I imported/exported.
For the error of iget text files or csv-17100
"The file format is incorrect near 'StationGlobals' section. Make sure you use start and end markers correctly. »
To get an xl format I get error - 18
"Stage of charger property has no import or export properties.
310 property values have been found.43 property values were imported from 920 or lines of data.
There is no where close to 920 data lines or 320 properties in the file exported.
If I use the property loader to load the properties to just hand it works very well, is it extra formatting that I do for the file before you import it or is it not possible to load the properties in a subsequence of a property to hand charger?
-
I plug into the connection starts to load but after like 10 seconds it stops... the computer remains switched on with the charger but it does not load. What can be?
Hello
This should ask in answers - Forum Windows for your version of Windows.
Answers - Windows Forums
http://answers.Microsoft.com/en-us/Windows======================
References to Vista also apply to Windows 7.
Check with support from the manufacturer of their books online and the drivers and their forums system
(as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
problems.=================================================================
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html=================================================================
Other information that might help:
Control Panel control - plan change Options - power plans - power - advanced settings
Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
long to load).In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
systems overload are not a problem.Here are some tips to help and troubleshoot battery issues.
Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
them and be careful). Batteries are old, or it could be a problem with the computer.
Check with the support of the machine system, and many of them have on line forums.New Lithium-Ion type battery usually last longer if you do not unload their less than 30%
However on a laptop that not extend their life a lot. Best is to use the a/c adapter
When this is possible.I use the free version of BatteryBar to monitor my battery. Click on the green button on the
Yellow box on the right side of the page to download the latest stable version.BatteryBar - free version available
http://osirisdevelopment.com/BatteryBar/index.htmlAnother good program
Vista battery saver - free
http://www.codeplex.com/vistabatteryProblems with the lives of its use and the battery of power - Mr Fixit
http://support.Microsoft.com/GP/windows_battery_power_settingsYou can also check with the manufacturer of system and forums that many use their own
proprietary software to monitor the battery and they could be known problems with your battery.============================================================
Battery meter: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/battery-meter-frequently-asked-questionsBattery saver
http://Windows.Microsoft.com/en-us/Windows7/conserving-battery-powerSolutions to common battery problems
http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problemsWhat is the precise the battery meter?
http://Windows.Microsoft.com/en-us/Windows7/how-accurate-is-the-battery-meter============================================================
Try this - to make a Restore Point
How to create a System Restore Point in Windows 7
http://www.SevenForums.com/tutorials/697-system-restore-point-create.htmlHow to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.htmlThen Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
Update the drivers (which can do nothing) - then do a right click and UNINSTALL each - RESTART
who will update the driver stacks.Problems with the lives of its use and the battery of power - Mr Fixit
http://support.Microsoft.com/GP/windows_battery_power_settingsI hope this helps.
I hope this helps.
-
X 1-charger (Kensington Absolutepower) detected but does not load
Recently I bought a Kensington Absolutepower (http://www.kensington.com/kensington/en/gb/s/1717/absolute-power.aspx) as a replacement for the charger standard 65w which was delivered with my X 1.
It seems to be compatible with other laptops Lenovo model X, and Lenovo are listed as a mark of support, but when it is plugged the X 1 does not load. The charger is recognized, (the familiar sound of the beep and the green light next to the laptop input lights upward when it is plugged) but does not not the battery. The machine is designed for the correct voltage setting, and all the Lenovo firmware is up to date. Someone at - it any suggestions or experience with this combination of product before I return the charger?
Hello
According to the following link: http://www.kensington.com/kensington/en/gb/p/1440/K38080EU/absolutepower%e2%84%a2-laptop-phone-table... the X 1 model is not compatible with the absolute Kennsington power adapter.
Here is a list of the compatible models of the X series:
X100e 3508 of X100e-2876 (L) (L) X 200 (L) X 200 Tablet X200s (L) (L) X200s (L) X 60 (L) X 60 compressed X60s (L) (L) X 61 (L) X 61 Tablet X61s (L) (L) X 201 (L) X 201 Tablet X201s (L) (L) X 300 (L) X 301 (L) X 301 (L)
-
Need help with a DC load, please help.
OK, so I installed CC, and when I try to open it, it has a constant loading screen. PLEASEEE help I need PS for the work. I'm on a Macbook air.
Hello
Please try the steps of troubleshooting here App does not open. Wheel of progress constantly calls and let me know how it goes.
^ Ani
-
I'm not very good with computers and need help. My 4 LR and LR 5 upgrade are on the disc, but do not use my new MacBook Pro drive. How can I load LR on my new computer? Also, how to make photos of LR on my old computer to the new computer?
You can download Lightroom via the link below. If you just want to install the upgrade version 5 that you don't need to install first - 4 you probably just provide the serial number for this, when you activate 5.
Lightroom - all versions
Windows
http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows
Mac
http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh
With regard to transfer photos goes, which is something you could get help in the forum of Photoshop Lightroom . But you could wait here and see if anyone knows, or you could search Google and probably know how.
-
Do we need to re - create data load rules if we move from EBS 11 to 12?
If so, please explain why. Thank you.If you switch from EBS 11-12 of the EBS, you need to create a new entry in the source system in ERPi.
Once the new source system is created, you then need to initialize the source system in ERPi.
From there, you need to associate it with a format of import and localities in ERPI and your data load rules are then based on location.
-
Need help on how to load lov accoding to the value, select locale
Hello
My scenario is, I'll have two buttons. A single button for local (English) and another button for local (Nl) Dutch.
I have a table of database that hold the 2 columns, which are en and Nl.
I load this value of columns using a Lov
When I click on the en button, Lov sholud load according to valus in the database column in and when I click on Nl it touches sholud charge Lov according to the values in the Nl column.
I use a managed Session bean that allows to set the locale.
I've implemented this scenario, but I had some bad problems.
(1) my implemented method is not recommended as a best practice
(2) lov dosagesn can't change until I click a value to this topic.
In the query select lov, I used the link variable and value as adf.context.expressionEvaluator.evaluate('#{UserPreferences.language}')
It is not recommended, so please help me to do this with best practices.
Thank you.in your bean writing managed code below
FacesContext facesContext = getFacesContext(); Application app = facesContext.getApplication(); ExpressionFactory elFactory = app.getExpressionFactory(); ELContext elContext = facesContext.getELContext(); ValueExpression valueExp = elFactory.createValueExpression(elContext, "#{data." +"APPLICATION_MODULE_NAME" +".dataProvider}",Object.class); AppModuleImpl am =(AppModuleImpl)valueExp.getValue(elContext); // here AppModuleImpl is the application module Impl class name ViewObject myVO = am.findViewObject("VIEW_OBJECT_NAME"); myVO.setNamedWhereClauseParam("BIND_VARIABLE_NAME", "VALUE_OF_BINDVARIABLE"); myVO.executeQuery();
and test, hopefully this solves the problem :)
Maybe you are looking for
-
New Firefox doesn't let me make a new bookmark in a folder.
Previously with Firefox I could drop a new bookmark directly into a new or existing folder. How can I do with the new Firefox? (without having to save it and then move it later, I don't see how to do anyway) And how do I organize and edit bookmarks a
-
DVD - Rom SD-M1712 is able to burn discs double layer?
Hi, I have a pc compaq, with toshiba dvd players. DVD - rom SD-M1712. I have windows xp. I was doing a holiday film that is too big to go on a 4.7 GB dvd + r disc (which I have done before) so I thought that I had nothing better to do that to buy a l
-
HP elitebook 8540w: recovery of the hp 8540w bios problem.
Hello everyone, I have hp elitebook 8540w that stuck on the screen of the logo with the text below "press the ESC key for startup menu '. its seems that something is not wrong with the bios, so I tried to recover the bios with usb key method and win
-
Installed the updates, but the display looks like windows 98 and the Wireless does not work
HelloI use a laptop with vista service pack 2 and I tried to update windows via windows update on the recommendation of the support page from microsoft on how to unload a debugger. There are only three optional updates available, I forgot what they a
-
After the installation of the 2nd HD internal lack of CD Rom drive letters my computer.