DVD - Rom SD-M1712 is able to burn discs double layer?

Similar Questions

• Toshiba DVD - ROM SD-M1612 cannot read a burned disc

  Hello

  I have a problem. I wonder if anyone can help please.
  I tried to view a DVD-R on my pc using my dvd player which is a Toshiba DVD - ROM SD-M1612, but it keeps giving me the same error message:
  Windows cannot read from the disk, it is may be corrupted or in a format that windows recognizes.

  The disc was burned on another computer and plays very well on this and on a normal dvd player, so I excluded that the disc is damaged.
  After talking to some people, they suggested me update called firmware?
  I looked at this and can't find it anywhere on Toshibas support or downloads pages feel like looking for a needle in a haystack :)

  I have provided this figure as it apparently is the firmware that is currently installed on the pc.
  I wonder if anyone knows where I can get the current version and if it will help me perhaps discovered the burned DVD-R.
  TOSHIBA_DVD-ROM_SD M1612___1806___\5&C21666E&0&0.0.0

  Thank you for your time and help

  Derek

  Hello

  Sometimes this happens to me also, and to be honest it's nothing unusual.
  All CD or DVD is supported by the CD/DVD drive.
  I put t know what laptop you have, but in most cases the user's Guide provides information and details on the mids compatible and taken in charge.

  I ve experience with TDK CD and DVDs and I convinced Mr. I ve tired different CDs and DVDs from various manufacturers and all were not entirely compatible.

  The update of the firmware is not always a solution, but it is sometimes useful to improve compatibility. The update of the firmware can be downloaded from the Assembly of the computer.
  It seems that Toshiba provides updates of the firmware for the series of notebook clean on the European driver Toshiba page.

  To cut a long story short, try a few different CD or DVD from different manufacturers and check what support is no longer supported.

  Good bye

• DVD Rom won't recognize there is a disc in the drive

  My uncle gave me his old computer for Christmas. Before it was given to me it was sent for a tech restore the computer to factory setting. I think that they wrote zeros to the hard drive and started it completely.

  I used a few weeks after I had put the computer because I had installed something that did not work, System Restore. I had not won it first, but always ended up doing a system retore to when the computer is first restarted.

  Now my DVD Rom will not notice when a disc is in.  Him sometimes turns on, but the computer does not appear there in a disk. I looked in my computer and the CD drive is listed as empty.  Even when I try to play a DVD. The drive appears in the list player however.

  Any idea what I could have done wrong or how to fix this problem?

  Thank you.

  LisaAC salvation,

  · What is the service pack installed on your computer?

  · What is the number and the model of the computer?

  Follow the steps listed in the link below: how to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD: http://support.microsoft.com/kb/321641

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• (Redirect) DELL XPS 8700, the dvd burner burn discs dual layer

  Hello

  I think of buying an XPS 8700, can someone tell me please, the dvd writer has to burn dvd discs dual layer (dvd9 8.5 GB) thanks in advance.

  Hi bigkevin,

  I don't know if this is the case. I'll have you repost this in the forum Office for a more expert opinion.

  http://en.community.Dell.com/support-forums/desktop/

• Problem reading disc double layer, DVD player

  Windows DVD Maker burned fine on my drive of Verbatim DVD + R double layer.  But he won't play in any dvd player, we have.  Also tried to play in our portable dvd player and the PS3 with no luck.  What Miss me?  The 4.7 GB DVD works fine at our DVD players.  Thank you

  Thanks for your reply KSib.  I had the dvd recorded in the standard wmv file that windows saves in, which is very good.  But if you try to go to where you saved it on your computer and try to write on a double layer dvd, it is write it, but don't allow you to watch on your computer or another computer... not on a dvd player.  The only way to be able to play the DVD double layer on a dvd using Windows player is to burn the Windows DVD authoring application DVD (not the location to save to your hard drive).  It takes forever to burn, of course... but so well worth it in the end when he actually plays.

  Yay for me!

• CD/DVD will not read however I can burn discs

  OK computer gurus can you help me please understand this... I can burn a cd, however, any cd I put in not read or install new software.  Any help?

  Hi gurucarcar,

  1 when was the last time it was working fine?

  2. you receive an error message?

  Method 1

  Check out the link and run the below the fixit tool available in the link below.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Method 2

  If the previous step fails, then check out the Microsoft article and try the steps mentioned below.

  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  http://support.Microsoft.com/kb/321641

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can my laptop burn double layer DVD + R discs?

  Hey, I have a laptop of HP G60-213EM

  And I know that I can burn a DVD + R etc but can I burn double layer DVD + R discs? On my PC, I usually use Verbatim discs double layer. And really want a quick answer if anyone knows if my laptop will burn Verbatim dual layer DVD + discs R. thanks

  Easy trolling for the congratulations but not so easy to give the right info. Yes, you have the DVD Multi burner double layer, so you can burn discs double layer. You must also good burning software. Two layers are difficult to do and you get a lot of roller coaster. The jump from Layer 1 to layer 2 to the burning often causes a problem. The best way to do it is to make a .iso to first and then burn.

  Message edited by Hüffer 22/08/2009 16:30

• DV6 6B47DX laptop with DVD SuperMulti burner. Can burn Double layer DVD?

  I have a one year old laptop and I am trying to burn DVDs. I can't tell if my DVD burner, a DVD SuperMulti burner, can burn DLs manual online user documentation?

  Can anyone help?

  Thank you very much.

  Hello

  I would be pretty certain that it can burn discs double layer, but you can check it using the free application at the following link.

  http://www.VSO-Software.fr/products/Inspector/Inspector.php

  Kind regards

  DP - K

• Satellite U200: I am not able to burn DVDs

  I have a problem with the DVD writer:

  Since I formatted (and then reinstall with the restore CD that was with the computer at the beginning), I am not able to burn DVDs!

  How can I do to get that!

  And also, it's weird, instead of showing a DVD player, there are 2: one for the CD, a DVD, when it's the same thing...

  I am able to read the DVD, but I am not able to burn them :(

  > And also, it's weird, instead of showing a DVD player, there are 2: one for the CD, a DVD, when it's the same thing...

  It's very strange it s confusing two s WEIRD appears in MY computer

  What you could do is remove the player of ODD (CD/DVD) Device Manager, then restart the laptop.
  Please check if the CD/DVD would be recognized correctly after reinstalling again.

• double layer dvd win 7 x 64 does not burn

  I can't burn a double layer DVD (Memorex) in Win 7 x 64. Used to be able to but not now. Search many forums, no help. DVD burners have inclluded HL, HP 1260 t and Asus BW-12B1ST. All software and drivers up-to-date, I think. Even tried different DVD, no luck. Single layer all mfg all right, just not burn DL. Frustrated.

  If you can, lower the burning speed.  Double layer DVD are much more sensitive and downright temperamental than 4.7 standard.  And as you know, they are 5 or 6 times more expensive, too!

  Good luck.

• Cannot burn DVD + R double layer in CS5.5

  Hey everybody,

  I can't burn a double layer (8.5 GB) DVD + R in CS5.5 again. I tried burning the same project on a regualr DVD (4.7) and it works fine. When I go to build the project, it begins to prepare to build and then I get the error message "access denied!" A little more information would be appreciated!

  I wonder if it's because it's a DVD + R and not DVD-R, but I don't see how it would make a difference, maybe I'm wrong...

  My drive Burns DVD, Blu - Ray etc so it should do.

  Any useful information would be greatly appreciated.

  Thank you.

  Right click on the shortcut of en and choose Run as administrator.  Then you should be able to burn a disc double layer.

  -Jeff

• HP ENVY 17-R102NL: dvd burner double layer HP ENVY 17-R102NL

  Hello

  I would like to know what kind of burner is installed in HP ENVY 17 - R102NL laptop computer?

  What is the burner model number?

  It is a DVD burner double layer RW-/ + or not? or another type?

  Thank you

  From the Manual:

  Fixed optical drive, Series SATA, DVD +/-RW Double layer SuperMulti Supports zero power optical drive Supports M-drive 9.5 mm tray loading

  Optical drive DVD +/-RW Double layer SuperMulti 813784-001

  So yes, it will read and burn supports double layer.

  

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Double layer DVD ROM

  I want to know if my burner is double layer. This is the model DVD-RAM GH10L

  I tried to search on the net to find, but I had no luck.

  Thank you

• 1805 - S154: DVD - ROM is not working properly.

  I have a toshiba satellite 1805-S154, and I just started to use it again. The dvd - rom is more will play DVD, it will run CD but whenever I put in a dvd - rom, nothing, it will not read the disc. Anyone know why this happens and how how can I solve this problem?
  Thank you.

  Hello

  Well, have you tried to remove the DVD drive of the device?
  You must remove the drive from Device Manager. After the restart of the unit of the OS will recognize the DVD player again. Perhaps this procedure will help you fix this strange problem.

  Good bye

• Not able to burn blank discs in Windows Media Player 11

  Original title: NEED TO re - INSTALL WMP11 PROGRAMMER

  MY WINDOWS MEDIA PLAYER 11 IN WINDOWS XP VERSION 5.1 SP3 DOES NOT BURN THE SONGS ON A CD AUDIO VIRGIN. WHEN I CLICK "START BURN" AFTER A VIRGIN DISK IS IN THE DRAWER 'E', THE 'MEDIA INSERT BOX' THEN "DRAG TO DISC BOX" POSTER AND THE PROGRAM NEVER "AUTOMATICALLY STARTS TO BURN THE DISK OF VIRGIN.

  THE SOFTWARE HAS BEEN INSTALLED ORIGINALLY AS AN "OEM" IN MY DELL COMPUTER. I LEARNED THAT MY WMP11 IS PROBABLY DAMAGED AND MUST BE REPLACED.

  (1) DO I DELETE THE "WINDOWS MEDIA PLAYER 11" AND THE "WINDOWS MEDIA FORMAT 11 RUNTIME" PROGRAM BEFORE INSTALLING THE NEW WMP11 BY DOWNLOADING FROM THE MICROSOFT SITE?

  (2) I CAN DOWNLOAD THIS PROGRAM FROM MICROSOFT EVEN THOUGH MY ORIGINAL SOFTWARE WAS "OEM" INSTALLED BY DELL?

  (3) I AM 79 YEARS WITH BASIC COMPUTER KNOWLEDGE. CAN YOU GIVE ME A FEW POINTERS AS TO HOW TO DO THIS PROCESS "UNINSTALL AND REINSTALL?

  THANKS A LOT FOR YOUR HELP

  Hello

   
  1. were you able to burn disc using Windows Media Player 11 earlier?
  2 have you tried burning the disc manually?
  3. What is the exact error message you get?
  4. were there any changes (hardware or software) to the computer before the show?
  
  Download the Windows Media Player 11 from the link below and see if the problem persists.
  http://www.Microsoft.com/download/en/details.aspx?ID=8163
   
  Previously, reinstall WMP (Windows media Player), you try to burn manually.

  Change the settings for burning, then check.
  http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/burn

   
  
  Note: Yes, you can install Windows Media Player 11 from Microsoft, even if it has been installed by Dell. No, you do not have to remove the previous Windows Media Player 11, that it will update after you download and install from the link mentioned above.
  
  Hope that helps.