charger in place Tablet hp 10(1)

Similar Questions

• Omni 10 Tablet: AC charger for omni 10 Tablet have can buy a

  Hi all

  Anyone know where to buy a charger for 10 to an Omni 10 Tablet x 64 window.

  I live in Perth Western australia.

  Hi there @justlewis,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand you are looking for assistance with the purchase of a replacement charger for your Tablet 10 Omni. I'm happy to help you with this.

  HP Pro Tablet 610 HP Omni10 Maintenance and Service of Guide, here is a list of the different power adapters and the numbers for different countries and models of Tablet.

  Sector 18 W adapter:
  To be used on the models of Tablet HP Pro Tablet 610 in Australia 741855-002
  For use on all models of tablet in Europe and Korea South 741855-009
  To be used on the models of Tablet HP Pro Tablet 610 in India 741855-005
  For use on all models of tablet in 741855-008 North America
  For use on all models of tablet in the United Kingdom 741855-003

  You can try the HP parts store, just make sure that you are in the country / the correct region. You can do so by clicking on the little flag at the top right of the page next to the sign in link.  Or you can try to contact support, using the following http://www.hp.com/contacthp and create a case for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Please let me know how it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Elitex2 HP: Tablet HP Elite x 2 charger

  Can someone tell me how to buy a charger for the Tablet?, or an adapter for official AC charger? What model?

  Hello

  What is the product of your Tablet? Please check the following:

  http://store.HP.com/us/en/PDP/accessories-88342--1/HP-X2-20W-AC-adapter-p-h7a03aa-ABA--1?JumpID=re_r11662_redirect_ETR & TS = 20150622093746_Z6mCEGTuKCCP & HP - x 2-20W-AC-adapter

  Kind regards.

• XPS 18 Tablet does not charge while plugged in that?

  Hello people,

  I need help with a problem. When I plug the charger on the Tablet directly, it is shows "connected but no charging current", but when I plug it into the cradle, it works very well. I was wondering if it is a software switch that I could have activated. I just updated the drivers, BIOS and disconnected and reconnected the battery. Still having the same problem. I also checked the charger and it works as should be...

  Help, please.

  Thank you

  I had contacted support and talked to a guy of course India and went through it all.  He sent a techy above and replaced my motherboard.  All fixed.  In my own research and educated, it was very probably the regulatory load on the motherboard that went wrong.  Nothing to do with the updates or BIOS.

• Microsoft Office for Dell place 8 Android Tablet?

  I am looking to buy an Android Tablet and am interested in the Tablet 32 GB from Dell place 8. My only problem is, I can't find if it comes with Microsoft Office? If this is not the case, can be installed. If this isn't the case, nobody knows any Android tablets that can be used with Microsoft Offices. Android is a must if. Thank you!

  Office for Android is available for devices with Arm chips at this time.  All Dell place tablets running on Intel hardware. An Intel version is supposed to be in the pipeline.

• Satellite P200 - 17 c PSPB6E - battery and charger delivers

  Hello

  I was wondering if anyone can help.

  I had my laptop Satellite P200 - 17 c PSPB6E for about 2 years. For the last 6 months the battery and the AC adapter have been gradually getting worse.

  The adapter is now very loose and I need to hold it with one hand while using the laptop. The same battery with the AC charger in place does not increase (it shows 0% available plugged in, load). If the AC adapter slips, the laptop is dead and I need to recharge.

  Essentially, it seems the only thing keeping the laptop on, is the adapter (which itself is very loose).

  I need to know whether a battery or a problem with the AC adapter. I had only the laptop for a short period and would not have expected problems early.

  Thank you

  Baker

  Hello

  In my opinion, that your laptop is quite old (2 years) and these things can happen, mate.

  But I think you need new batteries and AC adapter or motherboard. If the battery doesn't charge with adapter connected the case is clear: the battery is faulty because she will not be charged.

  Regarding the connection of the adapter problem AC/DC it's hard to say because theoretically, it could also be a problem with the socket on the motherboard. This is why you should ask a technician for laptop. The technician can tell you what the problem is.

  Welcome them

• Different cables for Tablet of Yoga and the yoga keyboard

  I have a Yoga 2 and the keyboard is equipped with a micro usb for charging and the Tablet has a micro usb for charging. They both regularly USB ends on them but Uncable has what looks like a round capacitor buit in the cable, it looks like a round case plastic just before the end of the cable. Which cable is for the keyboard and that is for the Tablet

  the cable from the round box is for the keyboard

• HP Slatebook x 2 does not charge

  Hello. My x 2 Slatebook does not load. The base unit is fully charged, but the Tablet does not charge. When I turn it on, I get the symbol of battery with a red bar.

  Contact HP

• Know how to make automatic charger flat?

  OfficeJet 6110 all-in-one / vista 64-bit

  For the copy, how can I switch from ADF flat?

  Hello

  Whenever you want to copy from flat you should not place any document in the charger and place in the dish... incase you are still unable to do so and get an error message... Please visit the link below and follow the steps...

  http://support.HP.com/us-en/document/npu06189

  And for printing problems, you can visit the link below and follow the steps...

  http://support.HP.com/us-en/document/buu05210

  Concerning

  Aneesh

  I represent HP
  You can say thank YOU by clicking on the STAR of CONGRATULATIONS. If my suggestion solves your problem Mark as a 'SOLUTION' in this way, others can benefit thanks in advance!...

• Dell place 11 pro power adapter problem

  I have two power adapters replaced already. Power up cold start, it displays a message: "warning!" A power 3W AC adapter has been detected, is less than the recommended Latitude xx 23W adapter originally shipped. This will increase the time to charge the battery... "We told only load to the top of the Tablet and then unplug the charger. If the charger is plugged into the Tablet permanently charger will be damaged as indicated above. It seems that it is quite annoying to have to remember to unplug the charger when the Tablet is fully charged. Does anyone have a similar experience?

  The message of 3watts means that your power adapter swacked, probably due to a short circuit in the USB cable.   To find out, unplug the adapter from the wall and the tablet.   Plug it into the wall, then the tablet.  Put the Tablet and see if you still get the same error.  If so, you must replace the adapter and cable.   If no error, you need to replace the cable.   If this continues with a cable new, you may have damage to the internal microphone USB connector in the tablet.

  Leaving the adaptor plugged into the Tablet, after that the battery is fully charged is quite well and will cause no problem.   The Tablet and the battery are smart enough to stop loading once 100%.

• Tablet stuck in boot loop

  I have a Dell 10 5055 place tablet.

  I had windows 10 on it since I have the Tablet and never had any problems until today. A couple of months I have reset back there and it works beautifully. I have reset this morning only to find it in a boot loop where it shows the dell logo and then flashes an error and restarts. The error is "reboot system to make adjustments tpm2 indeed"

  I tried to plug and unplug. I even tried to press the volume up, which highlights the F12 boot menu, it displays the same error and restarts. I tried to go into the bios with the same question. I tried to hold the volume up and volume down to go into recovery mode and it displays a loading bar. After a few seconds it flashes the error and restarts. Not sure how he has adjusted very well a few months until this morning when my warranty has expired recently. I tried to contact support, and they said it would be $ 150 to get which is sent to them that they can fix. For $130, I can buy a used one online. If I knew I would get this issue I would not have reset. Don't know why and what could be the cause.

  Note this thread for anyone watching one.

  The poster has another thread on this problem, on the plateau Mobile Devices, which is a better place for discussion rather than here on the sound card from the laptop.

• Venue Pro 8: use the charger with a little more voltage and current?

  I just bought a Dell came Pro 8 tablet used running Windows 8.1. The seller didn't have the original charger, so he gave me a 12W of Apple loader that had taken out nominal 5.2V and 2. 4A

  Is it okay to use this charger for my Tablet? Any potential problems in the long term?

  Thank you!

  I'm sure that the voltage is OK to 99.9%.  The extent of the current note goes, which is often misunderstood.  The rated current for a charger power or power is the maximum that the charger/power is able to provide. It could be evaluated to a zillion amps, but the equipment to which it will draw only what it requires.

• 7 place of Dell does not illuminate

  I turn on my place Tablet 7 dell, dell logo appears, it gets all the way to almost and shuts...

  According to Dell, my warranty has expired, but still has 107 days?

  I am facing same problem with my Dell place 7 3740. .i bought Dell place 7 3740 Gallery of dell on 18 January 2015 and give my Tablet 3 - 4 times for repair of software and hardware service dell Center of date... plus, I bought last repair it's same not update device Dell when I go to the update of my place of dell device 3740 7 he stuck in the boot and then display an error logo... I look everywhere who how to recover or not flash this device some some and promising information is available on the internet... This peripheral Dell venue Android 7 3740 is not friendly to do bye not this type of JOKE or funny device for Rs.15000 /-well known company of DELL... Don't wait no not this crazy type of dell... I'm sick of dell... Do not reference dell bye products

• Touch screen driver Dell missing 11 5130 place

  My cousin recently gave me her 11 place tablet that I need a device to use to type just coursework at the College, as my 17 "MacBook Pro would be too heavy and fragile to carry in the London underground, five times a week. So I reinstalled windows 8 on the Tablet and when it started, the touch screen wouldn't work at all. I can not even find the Synaptics driver for touchscreen Windows and drivers listed on the Dell Web site do not yet work. I have reinstalled Windows many times that I know that Windows 8 contains a form any screen touch generic driver himself.  The screen works when in UEFI configuration of the Tablet, but when Windows starts, it is not. Device Manager does not even recognize the screen as a touch compatible HID and the system menu in the Control Panel indicates no touch input available. Does anyone have an idea where are the drivers for the screen?

  You must load the chipset and/or video drivers to resolve this issue.   Go to support.dell.com and load the page drivers for the product that you have (5130, 7130 and 7140).   Pull down those and install and it should solve the problem.

• HP Jet 8: 8 HP flow is dead.

  I bought a HP flow 8 at Best Buy on March 14, 2015. The Tablet has worked fine so far. I always leave the charge the tablet at night so I 100% the next day. But when I went to turn it on, nothing happens. No sign of life, battery does not charge. I tried to get on with and without the charger, but still no power. I don't know what could have happened. Could someone help?

  Thank you!

  When you connect the charger with the Tablet turned off, make sure you see the pictogram of loading on the screen for 10 seconds and then it should disappear for the rest of the time the charger is connected.  If you do not see the Tablet, charger or charging cable is defective.