Charging with the USB adapter.

Similar Questions

• Satellite L450-136 no longer charge with the AC adapter

  I was wondering if someone can help me.

  My laptop Toshiba Satellite L450-136 charge is no longer with the AC adapter.

  It is now run out of dead and the battery power.
  I don't know if the problem is with the computer or the power cable.

  It was working fine yesterday and then not work this morning.
  Nothing happened as the computer having fallen or anything.

  Does anyone have any ideas on how I can understand the problem and then fix it?

  Thank you!

  To be honest, I have two different laptops Toshiba (U400 and Tecra A11).
  The two race perfectly and never had problems charging the battery or similar
  I have other laptop which is 8 years from another manufacturer but the battery is dead, but it's nothing unusual for laptop that is so old ;)
  One of my friends has the same laptop as your Satellite L450 and this also works

  > I don't know if the problem is with the computer or the power cable.

  This can be verified if you would connect a power adapter new and tested.
  However, I think that it s not worth it to buy a new adapter only to run some tests, this should be done by technicians for laptop
  If your warranty is still valid, get in touch with the ASP guys and check this box

• Iconia W4-820 will not charge with the power adapter USB Std

  Bought my W4 Iconia four weeks ago, a demonstration model, the last of them. It was packed in the box with a micro USB x adapter USB OTG cable and a power adapter. Back at home I discovered that the power adapter has been to Asus, possibly mixed in the shop. The prospective buyer of the Asus Tablet demo likely will get the Acer adapter. Adapter Asus with micro USB male connector works fine; specs are 5.2V - 1.35 amps; seems to be a STD USB adapter. The Asus adapter has a connector to USB female port to connect to a USB x microphone cable to USB adapter (with cable power adapter came in the box). Bought a 2nd power with USB 2 socket adapter to connect my W4 Iconia and my Garmin Zumo390 browser to an adapter. Specs are 5V - 3.5 amps.
  The Zumo works very well with the new card, but does not work my W4. Charge light stays off. USB ports switched to he Zumo and the Iconia W4, but same result. Zumo fresh, but W4 not. Borrowed another power adapter USB, 5V - 2 mines anti-personnel and new Zumo accusations, but the W4 still does not work. Also tried different USB adapter cables, but the same thing; Zumo invoice, W4 does not work.
  How is that possible? I can't tell the difference of 0.2 V between the Asus adapter and a USB adaptor STD would make the difference. But maybe I'm wrong. Wanted for adapters for the W4 Iconia and found several, but all the 5V as expected.
  Can anyone help.
  Will go to the shop again next week, but if I need an adapter V 5.2 I should order with Acer. 5.2 V adapters do exist not (readibly).

  Resolved issues. A dark and humid Sunday afternoon back to the store with the Tablet and all the bells and whistles. Changed the card Asus for the original Acer 5V - 2Amps (10W). Took the time to find the Acer adapter in the store. Demonstrated the adapter 2nd with 2 output USB ports and it wouldn't work with the Tablet W4. Tried another and found to be ok. 2 USB ports have a different power, a port for a smartphone and the other port is one tablet. Total power rating of the adapter is 17.5W (5V - 3.5Amps); some 2.5 and 1Amps. A happy man is back home again.

• BlackBerry smartphones can not synchronize with the USB cable plugged into charge pod

  Hello

  I read on the web site of shopblackberry.com, in the details of charge pod ( http://www.shopblackberry.com/_blackberryaccessories/cgi-bin/pd.cgi?frompage=category&page=product_d... ) that the pod can handset with charger travel or data cable for charge and/or sync with a BlackBerry smartphone. So, my question is related on a problem or a misunderstanding of me to this description.

  I want to know if we could recharge and synchronize the BlackBerry via USB cable or is only responsible for the BlackBerry when connected that way. My second question is, is it possible to synchronize the BlackBerry with the USB cable plugged into the pod or not?

  Because I got a request from one of my users about the fact that his BlackBerry 9000 can not synchronize when it is on his group.

  Thank you very much!

  Hello

  It's a loading dock. It is useful, because just drag you your "BOLD" in there and it will load (just like the 8300 Curve).
  If you want to synchronize, you can plug a usb on the side of the appliance cord. This can be done while the machine is in its dock, where the description.

  I have the same crib, but for the 8300. It's really worth buying. I'm happy with it every day.

• Satellite Pro L20: battery not charge when the power adapter is connected

  Hello

  all advice appreciated.

  I had a Satellite Pro L20 for about 18 months. Recently, battery does not charge when the power adapter is connected. The battery light starts yellow (which means more liberated, I think?), then will both green, the machine sat for awhile. However the ACPI often said that AC is "offline."

  There are two recent occurrences that coincide with this problem, I try to eliminate:

  1. my friends rat chewed by the feeder for pets! Power is Mobile OK insofar as he fled sector - the rat seems to have simply chewed by the outer cover (I see some threads, but I think that is just a shield, although I'm not an electrician).

  2. I put the laptop in hibernation for the first time. That seemed to mess up the system a bit, which was what initially drew my attention to the problem. This question is a bit complicated because I'm under Linux (Xubuntu).

  I updated the drivers etc from windows when I bought the laptop. Never had any problems until now and have been running linux for centuries. Also, I have mainly the laptop the power supply turned off, but do not remove the battery (is that really a problem these days?)

  I obviously need to replace the adapter, but is - it is likely (and how I can check) that the battery was borked until?

  see you soon
  Chris

  First, please check if the other are lit.
  If the AC led and power led are on the adapter sector is ok and it provides the power to the laptop.

  > The battery light starts yellow (which means more liberated, I think?), then will both green, the machine sat for awhile
  If the battery LED is yellow, this means that the battery is not fully charged and if the Green led changes then recharging is caught and the battery has been recharged.

  So I really don t see any problems with the charge process.

  Maybe the battery is old and so you cannot use it for an extended in such a case only the replacement of the battery could help.

• Satellite A200 - problems with the AC adapter / CC

  Hello

  The problem concerns a Satellite A200 (PSAF6A-02H01N).

  Recently, there was problems with the laptop, taking several attempts to boot to Vista, it would lock up while loading or just hang and freeze just after loading Vista.
  But once it was up and the laptop running would be happy working for hours with the AC adapter is plugged in.

  The problem got worse now and the laptop will not load Vista end without crashing.
  We have now reduced the computer down to have only a problem when the power adapter is connected.
  The laptop battery will charge normally with the AC adapter is plugged in and the laptop on standby or off.

  The problem persists with the AC adapter is plugged in and the battery removed.
  The laptop will start and run perfectly with battery and no power adapter plugged. Once the AC adapter is plugged in the laptop indicates that the battery is charging and then after a few seconds it crash or freeze and the only escape is a full stop.
  The laptop will not work under the battery power for 30 minutes max.
  I checked the output voltage of the AC adapter and this seems to be a consistent 19.4 Volts.

  Is this only a problem of AC adapter or the problem with the laptop?

  Thanks in advance...

  The Canada Gazette

  I lifted the previous discussions on this problem and found one that was very similar, but unfortunately the user decided not to find the problem of the road, save money and buy a new laptop instead! Hmm. !! .. seems to me like this might be a prob. material. Maybe a new motherboard?... anyone have an idea of what are the costs for that perhaps? .. an ASP or decent technician backstreet?...

• IBM Thinkpad message: 'this machine can run faster with the USB 2.0 hub.

  Original title: Thinkpad USB 2.0 Hub.

  Hello:

  I have an IBM Thinkpad T-21 which is under Ubuntu & Windows xp.  I primarily use Windows XP.  The pop-up that keeps occurring is "this machine can run faster with the USB 2.0 hub.  Can you tell me how to upgrade my USB 2.0 Hub?  Would like to know because I can't sync my Android phone with my computer until I do it. Thank you.

  Are you sure you copied this error message properly?  In other words, he says that the hub could perform better if connected to a USB 2.0 port?  As far as I can determine that the T21 is not come with a USB 2.0 port, even if you connect a USB 2.0 device (for example a hub), the unit will only race as fast as the port allows it.

  What is the brand and model of your terminal?

  It is possible that the message means the opposite (i.e., your computer has a USB 2.0 port, but the hub is only a USB 1.1 device).

  USB 2.0 was introduced in 2001, so if you bought your computer before 2001, it is likely that you use USB 1.1 or 1.0.

  Open the Device Manager (start > run > devmgmt.msc > OK)
  Expand the category of 'USB Bus controllers'.
  If you see the "Enhanced" work for one or more of the listed devices, you have a USB 2.0 port.  If you do not see "Enhanced", you have USB 1.1.

  

  If the problem is that the USB port on the computer is not 2.0, so your only solution is to buy a USB 2.0 PC Card adapter.  Example and example 2
  If the problem is that the hub is not 2.0, then you will need to buy a new hub.

• Started at Mo and not charging with the charger connected. Charger works. Keyboard not workin except power button / stop. Restarted using ex in car without success. SW

  Started MacBook and not charging with the charger connected. Charger works. Keyboard does not not except the power button / stop. Restarted ex drive no available help hoping that it was a matter of SW. SW and the operating system works very well. Read some info online. Tried to reset the SMC. Now, the MacBook does not start. Can U help me please. Thanks in advance.

  MacBook, 2010, Mac OS X 10.6.8

  Hi Veronica Steward,.

  I understand that you have turned into a series of questions about your MacBook and want help getting the computer to turn on. Here is an article that can help you through the steps to fix this problem:
  

  If your Mac will not turn on - Apple Support

  Let us know how it goes and thanks for coming to Apple Support communities.

  See you soon.

• USB port from a digital Multiport card will not read the external SSD drive. Right USB - c for the USB adapter works fine.

  USB port from a digital Multiport card will not read the external SSD drive. Right USB - c for the USB adapter works fine.

  It's a new 12 '' MacBook

• Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  What Mac? (details)

• bad display wddm is not compatible with the vga adapter

  transparcency is horrible, wddm is not compatible with the vga adapter

  Hello

  1. who is the operating system installed on the system?

  2. do you get an error message?

  Method 1:

  Follow the link and check if the VGA card is compatible. Check if it helps.

  Windows 7 Compatibility Center
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/

  Method 2:

  Follow the link below and install the drivers in compatibility mode. Check if it helps.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  For more reference: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/problem-with-windows-display-driver-model/a98ccf9a-da4a-465d-bc69-4d0e88470057

  Let us know if it helps.

• 3 laptops different ALL been facing intermittent problems with the USB ports.

  We have 3 laptops at home, running 3 different versions of winsows 7... Home, Professional and Ultimate. They have in recent months ALL given intermittent problems with the USB ports. A device that worked on a port stops working. It may or may not work on another port. A week later it could very well lead again on the port that wouldn't work. This applies to all types of devices.

  A few more questions:

  Is there a USB device that you use with all three computers?

  This problem occurs with all kinds of USB devices?

  The is the problem with all the USB ports on each laptop?

  Have you tried to reinstall the USB drivers? As in, uninstall via the Device Manager, restart your PC and allowing Windows to reinstall?

• e9280t cannot start with the USB 3.0 card (tried several providers) new version of BIOS e9280t necessary

  Hello...

  I bought a new e9280t year last on the HP site complete with 9 GB of memory (now 16), Blu-ray/DVD writer & reader, tuner TV digital Hauppauge, ATI Radeon 4850 video card bi-ecrans, etc... Since then, I've added more memory and a Firewire 400/800 3 card. His running Win 7 Pro (sp1) and the BIOS is v5.29.

  I bought an external drive to USB 3.0 WD (3 TB) and a StarTech USB 3.0 card (Amazon.com). After installing a USB 3.0 card, the system would be powered on for a second then die and then do it again a few seconds later and the cycle continues until the power cord was pulled. Then, I pulled the USB 2.0 card and tried again only to have the same results. The only cards that remained in the system during the trial was the ATI card and the TV Hauppuage card.

  Thinking that the problem was with the USB 3.0 card, I bought another provider (Rocketfish of BestBuy) and installed. The same problem as with the other card USB 3.0, the system does not start.

  No software driver or other changes have been made to the system before installation tent (according to the vendor's installation instructions).

  Given that all failures occur during the power first sequence and cards have been tried with and without power tied to them, that the problem cannot be fixed with an upgrade of the BIOS for the motherboard of TRUCKEE. I could be wrong, but I'm going on 30 years of experience of material as my framework for this review.

  If anyone else has this same problem, it would be good to rally them around and see if HP notice us.

  Thank you

  Norm

  I upgraded my power supply 650w (thermal take) and it all works - USB 3 controller (Koutech Dual Channel SuperSpeed USB 3.0 PCI Express Card (2 x internal) model IO-PEU232) - he also has a SATA power connector, but it works very well with just a power bus.
  -also updates card reader (put it in the 2nd DVD Bay): internal Koutech IO-RCM630 Multi-in-1 USB 3.0 SuperSpeed Front Panel card reader with a USB 3.0 Port (3.5 ")

• Good afternoon, buy online lightroom, and I was charged with the first tranche and not yet count on the version full, what can I do?

  Good afternoon, buy online lightroom, and I was charged with the first tranche and not yet count on the version full, what can I do?

  This is an open forum, not Adobe support... Click below to contact Adobe staff for help

  While the forums are open 24/7 you can't contact Adobe support at any time

  Chat support: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• I have a G61 that won't start with the power adapter in, is this normal?

  My CA G61 - 320 will not start.  With the battery and the power adapter in, front power light blink 3 times.  With and without battery power adapter only, there is no lights at all and computer remains off.  Should not the computer always start and run with the power adapter even if the battery is dead?

  Have you tried with another plugged AC adapter and remove the battery?

  Kind regards
  ERICO