Check around the mouse on the screen

Similar Questions

• I tried the clean boot and now the hard drive works simply and screen went black. The mouse still moves around the screen without any outher work keys? That is what it is?

  I tried the clean boot and now the hard drive works simply and screen went black. The mouse still moves around the screen without any outher work keys? That is what it is?

  Hello

  You will need to reverse the clean boot, as it is either incidental compared to
  the real cause of the problem. What, where you try to fix initially using the cleanboot?

  You can access Mode safe? Repeatedly press F8 as you start? If so you can try the configuration - control panel
  The Device Manager - graphics card - Double click on - driver tab - click the driver UPDATE - then
  Right click on the device and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure) is
  CTRL + ALT + DEL and the processes tab find EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Don't forget to make a good backup or
  3.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can do a repair installation that needs to save the data, but you will
  to reinstall the programs. This also requires correct Vista disks especially for OEM versions. You
  will need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - enter a bracket )
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• NB100 - mouse cursor flies around the screen

  Hello

  So, I bought the NB100 and noticed that something was not right but stupidly put upward with her for over 2 years. Now he is just really annoying as its happens more frequently and, possibly, gets worse!

  Randomly, the mouse cursor flies around the screen, by clicking at the opening programs and files, etc. The only way to stop it is to turn off the laptop holding down the power button. She also does when I plug in a usb mouse (and disable the touchpad) so I assume that it is not the hardware, but I have reinstalled as the driver...

  Usually, if I turn the laptop on its always crazy but if I start it in safe mode its fine. This made me think I had a virus but I did a scan and nothing shows.

  In addition, I don't think that turn it off by holding the power button down is very good for the system that sometimes, when I try to turn it back on, it doesn't load at all (just a black screen with the cursor).

  Help, please! I would be eternally grateful...

  Thanks in advance, Nadia

  need you pretty much time to fix. My advice is to reinstall Windows from disk image or hard drive recovery. Please, understand me, it's easier and quicker to reinstall rather try to fix it.

• Windows 7, normal use - mouse freezes when you move around the screen

  Hi there I use Win7 since the RC1 of scene and found it rock solid, I'm now running Windows 7 Enterprise. I installed it on a Dell XPS 1710 and had few problems so far. When I start my computer and you move the mouse around the screen, the mouse "hangs" for a second or two, then moves, then crashes again. In even the startup sound I is unstable, as are MP3 when I play those. All these things worked * perfectly * until a lock suddenly toward the top of the computer having been on during a few hours, which was a new event. The computer haddnt overheating but since then this nervousness thing that happened.

  What I tried:

  Selective startup, without the elements of startup and services, without change.
  Search for new drivers for my card (Nvidia 7950GTX) gfx, no change.
  Shut down the computer to turn off this device to save power 'allow' in the option of USB hub root

  None of that helped him. The CPU spikes 16% at most when you the mosue blocking, I have a lot of RAM available. Occurs when I use the touchpad as well and even when I'm not running all programs - oh, I have a Microsoft Intelli Mouse 5 button.

  Hopfully somebody can provide some more ideas for me. Thanks in advance

  Hello

  Please scan your computer of viruses, you can also perform a full scan online.

  Here is the link:

  http://OneCare.live.com/site/en-za/default.htm?mkt=en-za

  Try to clean boot your machine, here is the link:
  http://support.Microsoft.com/kb/929135

  Kind regards
  Jackson.

• NB200 - cursor jumps around the screen while typing

  Hello

  When I type in MS Word or OpenOffice or any other text box on a Web site for example flushing prompt that identifies where the next word/character must be placed around the screen jumps.

  So when I type a line of text I then start another line below and then without reason, that the text cursor jumps to the top line. This inserts text in the wrong place, which is incredibly annoying!

  Any help or ideas greatly appreciated!
  Thesis writing will be more months if the problem persists! :)

  John

  Here is the solution I've used and displayed a few threads down...

  Under the properties of the mouse, click on the "Advanced" tab, click on the pointer speed and Tapping settings, in the new screen click setting Tapping, on this screen, check the box that says disable Tapping during the key entry.

  You will suffer is not since the Cursur jump you met more...

  HTH,

  The f

• When turned on my laptop, there is a black border around the screen.

  Original title: screen resolution problem

  Hello

  A few weeks ago, I turned on my laptopn and there was a black border around the screen. I managed to change the screen resolution, but my laptop seems to think that I have a dual monitor? And my resolution is still not like it was before. Obviously this isn't a huge problem, but it's annoying to have to go and change it regularly.

  In addition, given that this has started to happen, I noticed that when I turn on my laptopn, instead of the usual Acer / Windows startup screen, the screen is all black, until the login screen appears. I don't know if this is related or how, once again, this isn't a big deal in the grand scheme of things, but if an update is installed, you do not see the progress it's making!

  I ran a system restore, without success.

  Running Windows 7 on a laptop Acer Aspire. Any suggestions welcome, although I'm not that tech-savvy!

  Thank you

  Hello

  The first thing to check is your theme controls. Go to the control panel and select personalization. When this window opens, go down and select wallpaper. When this window opens go to the lower left corner and make sure that the background that position of the image is set to 'bridge '. Save the changes and return (right click on the name of the theme in the theme dialog box).

  Let me know if this solves the problem for you.

  Kind regards

  BearPup

• On my ipad3 I rectangles blue moving around the screen. Momentarily switches to an article before moving on. Very irritating

  I have an iPad 3. Model MC707B/A. Version 9.3.2 (13F69).

  Blue rectangles are continually moving around the screen from one section to the other. Also a blue stripe sometimes crosses the screen. Has started yesterday for no apparent reason.

  I have tried rebooting with no luck. Helpline Apple could suggest only reset to factory settings. Does anyone have a less radical solution?

  This is one of the accessibility features. It's the switch command. You will need to go into settings > general > accessibility > switch control and turn it off. It is possible, that's what the setting is triple clicking the home button. Try triple clicking again and see if that if he stops, otherwise, use the road that I explained earlier.

• Satellite Pro M30: rim around the screen is broken

  I have a problem with the screen on my M30.

  He began to blur and sometimes it goes black, but turns on instantly.

  The black border around the screen is broken in the lower left corner, it never really seemed to be able to follow the screen correctly, and there are some time (a month or two) he snapped.

  It seems to me that there could be a loose or faulty connection somewhere. The problem often appears when I try to adjust the screen or move the computer. Someone has an idea of what might work?

  Hello

  Looks like this isn't something "fix-it-yourself". You should consider contacting an ASP for the fixed machine.
  The LCD mask is cosmetic and could be left off-, but the question of the LCD (screen goes fuzzy and come back) looks like to a defective part (LCD, wiring, PCB) or a bad connection on this path.

  If you still have the warranty - go to an ASP. If this is not the case, ask for a quote.

  BR

  Tom

• My iPhone 6s has lines of black border around the screen. Is this normal?

  My iPhone 6s has lines of black border around the screen. Is this normal?

  A screenshot would help us see what you see.

• When we turn on my wife's ipad, a box of red line begins to jump around the screen, and then a pale red stripe moves back on the screen. Any ideas on how to stop it? Thank you

  When we turn on my wife's ipad, a box of red line begins to jump around the screen, and then a pale red stripe moves back on the screen. Any ideas on how to stop it? Thank you

  The standard specifies:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  -Restore factory settings/new iOS device.

  If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

• How to open photoshop with tools window around the screen?

  How to open photoshop with tools window around the screen?

  Try this:

  

  I hope this helps!

  Julia

• The mouse icon moves firmly around the screen

  Original title: floating freely icon mouse?

  When you move the icon on the screen, it does not move firmly/precisely...feels almost as another hand is control.

  Hi Claire,

  Thanks for posting your query in Microsoft Community.

  In order to help you better, please provide us with the following information:

  1. Using a wired or wireless mouse or a touchpad?
  2. Using a laptop or desktop?
  3. Check the behavior by plugging another mouse.

  According the description, I understand that the mouse icon is not mobile firmly across the screen. I suggest methods and check them off below if it helps:

  1. check your mouse for dirt or debris if you use a wired mouse. To check debris, flip the mouse and twist the casing around the ball. It should run free, allowing you to remove it. Check the mouse cover and the area around the compartment of mice for the forests of dust that can keep the ball from rolling freely.

  2. determine if a recent update is causing your mouse drifting on a laptop. Click on the "Start" menu and open the "Control Panel". Click on "System and Maintenance" and then click "Backup and Restore Center." Select a restore point and to reinstall updates one by one to determine what update causes your cursor problem.

  3. disconnect your mouse if you use a cable one and make sure that your USB port is free of debris. Plug the mouse back and if the problem is resolved.

  4 update your device driver by right-clicking on "My computer", then clicking on "Properties" and then clicking on the tab "Hardware" "Device Manager." Find your mouse driver, right click and select "update driver software".

  I suggest you to refer the below link and try to change the mouse settings and check:

  http://Windows.Microsoft.com/en-us/Windows/change-mouse-settings#1TC=Windows-7

  Also check out the link:

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-keyboard-problems-in-Windows#V1H=tab01

  Return with the required information, so that we can help you resolve the issue.
  For any Windows help in the future, feel free to contact us and we will be happy to help you.

• When we try to use our multipoint system 2010 with more than 2 users the mouse around the screen to move.

  Original title: problems using multipoint server 2010.

  When we try to use our multipoint system 2010 with more than 2 users mice become uncontrollable and move the screens themselves. How to fix this.

  Hi thomasgk,

  The issue of Windows Multipoint Server 2010, you have posted is better suited for the IT Pro TechNet public. Please ask your question in the TechNet forums for assistance.

  Hope the helps of information.

• How are checks on the screen?

  Hello

  I want to add on the screen controls to custom FCP generators and effects. How are controls in movement on the screen?

  Thank you

  Ivan

  Basically, you need to use those already provided in motion (unless you can program the FxPlug plugins).

  You'll find commands to the screen in several filters. The most common is Poke (in the set of filters of distortion.) However, * any * filter CSOS have to publish in its parameter list can be used and there are several different types. ('Exotic' favourites are blur > blur Gradient, tile > Kaleidotile and aesthetic > extrusion.)

  Create a new top-level group - rename CSO (or CSO if you have more than one). In the Group Inspector (you * must *) set a fixed resolution 2D. (Otherwise will be very unexpected effects.)

  The group selected, add filters > distortion > Poke.

  In the Inspector of Poke, find and check CSOS to publish.

  Note: the group still has a length of 0 images. You can in properties > calendar > and set the time to the length of your project (or more) or more simply, just add a shape: rectangle, circle, what is practical and then put it in the wide (or turn off the group so it does not appear). The group will have its length defined for the duration of the project (if your preferences > project > create a new layer at the beginning of the project is on or your playhead is 0.) Onscreen controls appear only in FCPX to the number of frames including the object/group parent in the timeline panel. Simply adding a filter does not add an object and filters have no length if there is nothing to act accordingly.

  Add behaviors to link to the X and the parameters Y of your object under control. (You need add separate links to individual settings, because there is a mismatch of types of settings.)

  In Wells of the behaviour Source object, add the group to the OSC. For the Source parameter in the compatible settings drop-down list, select Filters.Poke.Center.X and Y respectively.  Your object will move to the upper right corner of the canvas. At the bottom of each link behavior Inspector, there is an Offset value. Define each of these to-0.5 (which resets the object in the middle of the canvas.)

  Your object will now be controllable in FCPX with the control on the screen.

  You know how application relates to several destinations resolution and how it applies to what you were doing just a little.

  Motion (very skillfully I must add) treated all resolutions screens as having the coordinates of 0 and 1 (inclusive). No matter what draft resolution you have, SD, HD, 4 K, etc... Controls of the OSC are considered as having the same dimensions. Real pixel values are calculated from the screen resolutions for horizontal and vertical to the destination video (project) dimensions. [Fixed resolution dimensions help you determine the proportions in FCPX, but according to me, are automatically set to adapt to the target FCPX project when it is applied.] Maybe it's not always true, and if you make adjustments, then you essentially override this behavior in your specific model project. See below.]

  In the middle of the canvas to an object, as a form, etc., is (0,0), but for a CSO is 0.5, 0.5. When you create a relationship between an object and the parameters on-screen control center, you're "setting" the Center in a different coordinate system. Compensation for these values to the negative terminal of the Center value resets the position to the original 'normal '.

  Whatever he says, you can actually fool onscreen controls by setting a custom 'resolution' of the group you places in the dimensions of fixed resolution (say: 300x500pixels). So if you want to create something like a "HUD" to appear in FCPX and have the only control flow within its limits and control another object on the screen, which can be done (using the behaviors of clamp to restrict the Center.X and the Center.Y to between 0 and 1 and the OSC will remain within the limits of the resolution group fixed dimensions you set).  If you don't 'get' this still, forget about it then for now, it is not so important and has nothing to do with what you were asking. [In the case of a "HUD" type configuration, you can create another group with other CSO to control the placement of objects on the screen HUD Group, and everything in this group would be sent as CSOS, including the CSOS of the object of HUD designed... get some practice with CSO, then venture into complicated. You are only limited by what you can put together with what you have available in motion if you do not program such things at the level of the application/plugin. [Here is an example of this type of control project - it's very simple and used to define the background color: https://www.youtube.com/watch?v=jpIxuuZuko8 - it has been designed to be taken apart and studied.]

  If you build a model with CSO and the OSC does not appear in FCPX: return in movement and check that his group has length (Timing) and make sure that you have checked the box publish CSOS (and that the effect is selected in the Inspector of FCPX - click the title bar of effect).

  On the resolution fixed. Motion, by default, the account of dynamic groups - they grow and to shrink to just be the bounding box of all that they contain. By setting the fixed resolution, you force Motion to limit the group size to what you have defined. When control of the center of CSOS goes beyond the limits of a dynamic group, it acts as a multiplier of positional - and your purpose (most of the time immediately) disappears very quickly off the screen. If your initial group of the OSC has no physical object in it, it's dynamic ratings are 0 x 0 and * any * movement of the control on the screen increases by whole numbers for each pixel, it moves. If you move the OSC 1/2 pixel in any direction, the object's Center is already aligned with the edge of the canvas.

  If you have any questions, do not hesitate to ask. This topic may be a little hard to grasp until you actually out by yourself and see it in action.

• I want to disable my touchpad. Cursor/pointer keeps jumping around the screen

  Original title: wandering cursor

  I have a dell inspiron 1720 with Windows Vista 32-bit. I want to disable my touchpad. When I check in the Device Manager files, nothing has offered disable the touchpad. My cursor jumps around and I read that disable the touchpad will help to stop this. I downloaded Touchpad Pal, but that did not help. Thanks for any help!

  Hi murph528,

  I suggest that you contact Dell support for more information on disabling the touchpad.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_technical_support