Check box in the table

Similar Questions

• If else check box in the table does not properly

  I'm new to this forum and hope someone can help me with that.

  I created a dynamic array and I have 2 types of boxes.

  One is a check box for the individual lines that fills a value in a cell. Otherwise, it will be zero.

  Another is a master checkbox that activates the check all lines and value box

  Problem statement:

  When I click on the master check box, every individual is selected. However, the value of the cell is incorrect. Value of all the rows is based on the value of the first row.

  Here is my code:

  Master Checkbox (using the formcal in click):

  If (CheckBoxAll == "1") then

  Table.Row1 [*]. CheckBox1 = "1";

  Table.Row1 [*]. Cell4 = table.row1 [*]. Cell2;

  on the other

  Table.Row1 [*]. CheckBox1 = '0 '.

  Table.Row1 [*]. Cell4 = 0;

  endif

  Check box for the individual line (using the formcal in click):

  If (CheckBox1 == "1") then

  Cell4 = Cell2

  on the other

  Cell4 = 0

  endif

  Otherwise, I tried to turn the master value of the box fill off & put a validation in each line instead. This time it works! but it kept prompting a message for each rows whenever I unchecked the box: "the value of Checkbox1 is not valid.

  Here is my code:

  Master Checkbox (using the formcal in click):

  If (CheckBoxAll == "1") then

  Table.Row1 [*]. CheckBox1 = "1";

  on the other

  Table.Row1 [*]. CheckBox1 = '0 '.

  endif

  Check box for the individual line (using the formcal to validate the event):

  If (CheckBox1 == "1") then

  Cell4 = Cell2

  on the other

  Cell4 = 0

  endif

  Appreciate all the help that I am at a loss as to why the tis error occurs and how to solve it.

  Thank you!

  Hello world

  I managed to find a solution to my problem. I write for the benefit of any1 facing the similar problem.

  I changed formcal to Javascript.

  Master box (Click event):

  vRows var = Table._Row1.count;

  for (var i = 0; i)

  {

  If (this.) RawValue is "1")

  {

  xfa.resolveNode ("Table.Row1 [" + i + "]"). CheckBox1.rawValue = "1";

  xfa.resolveNode ("Table.Row1 [" + i + "]"). Cell4.RawValue = xfa.resolveNode ("Table.Row1 [" + i + "]"). Cell2.RawValue;

  }

  on the other

  {

  xfa.resolveNode ("Table.Row1 [" + i + "]"). CheckBox1.rawValue = "0";

  xfa.resolveNode ("Table.Row1 [" + i + "]"). Cell4.RawValue = 0;

  }

  }

  Another point to note, it only works for the table of data binding. If the row in the table has been created original, somehow the Table._Row1.count does not work. It detects that the value = 1.

  Thanks to all who tried to help me!

• Select the check box for the table of the ADF

  Hi all
  
  I want to add the check box in front of each line. The user will select the row by clicking the box and going to treatment by clicking on a button.
  
  I just almost all possible discussions on OTN.
  
  What I've done so now
  1] added a transitional Boolean attribute in my VO. added as a selectBooleanCheckbox in .jspx page.
  [2] a button with backing bean that will do the processing. [He will pick up the attributes of all ranks and be written in a file]
  [* 3] it works fine if I use the default option of line by Ctel selection + A, or by pressing Ctrl + click or SHIFT + arrow key. Backing bean is not the issue.*
  [4] try to intercept the TableSelection Listner also.
  
  It comes
  
  When I select the check box, only the last selected line is processed and not all lines. How to make the selectable online by clicking on the checkbox.
  
  I use JDeveloper 11.1.1.5
  
  Refered links
  http://www.gebs.ro/blog/Oracle/Oracle-ADF-row-selection-using-checkboxes/
  http://technology.AMIS.nl/2010/07/29/ADF-11g-select-all-rows-in-an-ADF-table/
  http://Sameh-Nassar.blogspot.nl/2009/12/use-checkbox-for-selecting-multiple.html
  http://www.Oracle.com/technetwork/developer-tools/ADF/learnmore/99-checkbox-for-delete-in-table-1539659.PDF
  
  Mukesh.

  https://www.dropbox.com/s/1gqsaobgyjycie6/AddDeleteEmployees.rar
  

• Clear the check box in the new if invalid table line

  Hi all.

  I use JDev version 11.1.2.4.0.

  I have a table with 2 columns, which one of them is a checkbox. I want to clear this check box if the user inserts a newline invalid. So far, I have an EL expression in my field to disable: disabled = "#{viewScope.viewBean.disable}", where a Boolean variable disable is. "

  I put the variable Boolean true when the user inserts a line not valid, but I am not able to update the fields. The only way I can do this is to update the entire table, but then I lose the filters.

  For example, I want to do something like this:

  I have a VO employed with the salary attribute where the user can search/insert/update / delete. The user searches for all employees with > 30 k salary. Then, the user inserts a new employee, but he or she inserts one that's already in the DB. So, the line is not valid. I want to disable the all check box in my table WITHOUT losing the > 30 k search salary. If I update the entire table, the search has disappeared and all employees are shown.

  Any ideas?

  Edit: I also tried this approach, but I had the same problem with a refreshing existing lines: https://udayarocks.wordpress.com/2011/07/30/how-to-conditionally-enable-disable-the-column-contents-in-the-adf-11g-table...

  The transitional value will remain if it is added to the OS, not the VO.

  Timo

• check box use the temporary Interface as a derived Table

  Hello
  in some guides and oracle websits, they want to check the box use the temporary Interface as a derived Table (Sub-Select).
  but the topology and datastor KM or target, I can't click on it...
  is - anyone know why? what setting I need to change?
  
  reason
  I want to create a temporary interface to use as a source.
  MySQL-> temp. interface-> join oracle of temp table. interface.
  
  Thank you..
  Michael

  Hi michael,.

  When you create a temporary interface, an interface in which the target data store does not exist, you can then use this temporary interface as a source in a different interface. Once you add the temp as a source interface on the mapping tab, select the temporary interface. You should see the check box in the Properties window of the Source to 'Use the temporary Interface as a Derived Table (Sub-Select)'. To use the code integrated into the interface of temp, check this box. The code will then be added as a subselect for this interface.

  See this post for more details: http://www.rittmanmead.com/2011/06/odi-11g-new-mapping-and-interface-features-part-1/

  Enjoy!
  Michael R.

• value of the check box in the insert statement

  I'm hand-coding an insert from the insert record sb construction will do for this application. The values of several form elements are inserted into the fields in the table. The problem that occur is a checkbox value in the form. If the box is checked, all is well and the value is 'True' inserted in the appropriate database field. However, if the checkbox is not checked I get syntax error message. The reason being that, while are passed on to the fields with null null, the checkbox is not transmitted at all. This is evident when changing the method of the form to 'Get' for testing purposes. There is no reference to this field check box in the query string.
  
  My assumption is that this would require an If statement changing the value of the 'False' check box when the box is blocked. How I would go to this topic. With my knowledge limited to the ASP, I wrote the following, but it doesn't seem to work:
  
  < input name = "emailprob_mor" type = "checkbox" id = "emailprob_mor" value = "< % If Not (IsNull (Request.Form ("emailprob_cus")) then Response.Write"True") Else Response.Write ("False") End If % >" >

  When you use the boxes, it is better to separate your Request.Form statement and your insert statement:

  cbVal = '0 '.
  If (Request.Form ("emailprob_mor") <> "") then cbVal = Request.Form ("emailprob_mor")

  Then in your SQL statement:

  "& cbVal &"..."

  For your real HTML:

  "" ) then response.write(" checked='checked' ") %>>

  It is true that if the user does not check the box, then it appears as if there is no when it is submitted, that is the reason why he must be given a default value when the record is inserted.

• Firefox crashes in typing or by clicking check box or the radio button, even with all the plugins / extensions removed. Check with many types of malware scanners.

  Firefox crashes in typing or by clicking check box or the radio button, even with all the plugins / extensions disabled, then deleted. Sometimes it hangs for five minutes. I checked the PC with several types of scanners of evil-ware, but none to be found. All hidden and deleted cookies, all DELETED & extension plugins. Remove all instances of Firefox PC and registry, then restored to bookmarks. The only thing that I did not is to remove and reinstall not my favorites.
  Windows Vista (yes I know) and FF 13.0.1

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://hacks.Mozilla.org/2010/09/hardware-acceleration/
  • https://support.Mozilla.org/KB/how-do-i-upgrade-my-graphics-drivers
  • http://KB.mozillazine.org/Firefox_hangs
  • https://support.Mozilla.org/KB/Firefox+hangs

• Conditionally Enable and Disable select any check box in the report position only?

  4.2.1

  THM: 2

  Hello

  I have a classic report with an apex_item.checkbox2 as the first column. I also had to add a "Select all" check box in the header. I did it by adding this to the column header

  < input type = "checkbox" onclick = "$f_CheckFirstColumn (this)" / > "

  However, there is a requirement where in I need to disable this "topic" check all (line remain) when a certain field is not filled.

  For example: P2_fLAG which is a page element is null, then select it title all the checkbox should be disabled.

  Is this possible?

  Thank you

  Ryan

  ryansun wrote:

  This bump. Wondering if anyone has done this before?

  A took a look yesterday. May have the time to finish today.

  In this page if F1 and F2 are null and the user has selected "Select all" and click on the button. A message to standard error or alert apex must be indicated, asking the user to fill something in the fields F1 or F2.

  I think that the idea first of activation and deactivation of select box everything is the best approach. Always better to prevent the user from doing something than to allow them to do it and then tell them they can't.

• Check box in the report header

  Hi all.
  I have a simple question, but couldn't find the answer myself.
  I need to create the check box in the report header and clicking on it to check all lines.
  Something like in this example ] of Denes Kubicek.
  And another question: How can I do this in interactive report?
  
  Thanks for your replies.

  Hello

  Go to the attributes of the report of the report and in the header field, add...

  Also, make sure THAT SQL the source in your area has a column of the box...

  select
  APEX_ITEM.CHECKBOX(1,COLUMN_HERE) "Check",
  .....
  

  I hope this helps.

  -Chris

• Can a checkbox State (true/false) another State (different) check box in the control?

  Hello

  I am trying to find the answer in the internet and here in the support forums, but so far without success.

  So, I was wondering is it possible to make a CheckBox control (checked/unchecked) other (different) box in the same table.

  Lets say I have a list of items to take on the assignment in the field (in separate lines) in my checklist. Some of these items will be check together so that both can work as one.

  For example - gas generator and fuel tank:

  You can check the box next to "gas tank" if you need to take only,

  But if you check 'gas generator' numbers should automatically check the "fuel tank" so I remember to take it as well to the generator.

  So, please help me with the formula if there is possibility to do so in the last app (OSX) number. Thank you.

  Hi Shkacas,

  Perhaps you might consider to penetrate your activities field trip.

  

  The elements required for each activity are in another table. You can 'hide' this table by moving (copy / paste) to another sheet. The formulas will adjust automatically.

  Formula in the Input Table C2 (and fill down)

  = IF (B2, CONCATENATE (Required::B2 elements ",", Required::C2, ",", elements Required::D2, ",", elements Required::E2),' ')

  Ignore the additional decimals in the result. These are refills for empty cells in the table of the required elements.

  Another example where insГЁrent the check boxes unchecked "" (NULL, empty)

  

  Kind regards

  Ian.

• Check box in the header of the classic report: select all the report Archives

  Hi friends,

  I use Apex 4.2 worm.

  I've created a classic report and create the check box (apex_item.checkbox (1), EMPNO, 'DISABLED' tick,) in this report.

  My Code

  Select * from)

  Select

  apex_item. CheckBox (1), EMPNO, "DISABLED" tick.

  "EMPNO', 'ENAME', 'JOB', 'MGR', 'HIREDATE',"SAL","COMM","DEPTNO. "

  from EMP)

  where)

  InStr (upper ("ENAME"), upper (nvl (: P6_REPORT_SEARCH, "ENAME"))) > 0 or

  InStr (upper ("JOB"), upper (nvl (: P6_REPORT_SEARCH, "JOB"))) > 0

  ) and

  (nvl(:P6_ENAME,'0') = '0' or ENAME =: P6_ENAME) and

  (nvl(:P6_JOB,'0') = '0' or JOB =: P6_JOB) and

  (nvl(:P6_MANAGER,'0') = '0' or MGR =: P6_MANAGER)

  and

  (nvl(:P6_DEPT_NO,'0') = '0' or DEPTNO =: P6_DEPT_NO)

  I need to create the checkbox in the header of the classic as tabular report where if I click in the header box then all archives should be checked.

  How can I do this with classic report.

  If you want to see this issue in the workspace, then you can use the workspace details below

  Workspace: APEX_ISSUE

  User name: [email protected]

  Password: kaushik1@34

  Page no.: 6

  Thank you

  Hi Maxence,

  The above problem is solved. Please check the same.

  I added the following code in the header of the first column:

  NOTE: I used Carl Backstrom solution for this: Blog of Carl Backstrom: Mini check all HowTo

  But this solution works only when the first column in your report / table is a checkbox.

  If you have more columns rather than the first column where you want to check and uncheck all the features then follow the solution of Jeff Kemp:

  http://jeffkemponoracle.com/2012/11/15/select-all-Unselect-all-checkbox-in-interactive-report-header/

  I hope this helps!

  Kind regards

  Kiran

• Yet another question "check box in a table"

  Hi everyone - I feel like this issue has been beaten to death, but I'm not super techno and it is very hard for me to decipher the many solutions that have been offered in this forum.
  
  I downloaded and installed the plugin simple checkbox. I want to use it to allow the user to select a checkbox that should be updated then a varchar2 column (1) in my table of database with a "Y" or "n" depending on whether the box is checked. In a simple form of APEX it works easily and without any problems that I can choose the plugin Simple checkbox in the dropdown list of "display as" for a given when creating the form item.
  
  In a tabular presentation there is no option to select the plugin simple checkbox for display "like." So can I assume that this is not supported and so I need to use the apex_item.checkbox function in my select statement?
  
  I tried this and I see a box on my sub form of table, but when I select the check box for a given row, and click Update I get this error:
  

  'Current version of data in database has changed since user initiated update process. current row version identifier = "9660AA52272606105296577232D033C7" application row version identifier = "AC661FC2F31800615ABE16CA014BB96F" (Row 1)'

  I looked at the example of the Dene here > http://deneskubicek.blogspot.com/2008/10/tabular-form-checkbox-for-setting.html, but I just can't believe that this a lot of code is needed to do something so simple.
  
  I have a http://apex.oracle.com sample app installation where I have reproduced my setup:

  Workspace: Leppard
  username/pw: guest/app_1000
  MyTestApp > MyTabularForm.
  The column in question is 'Checkbox' and the db column in Emp is also named chechbox.

  Any suggestion would be appreciated.
  
  Thank you
  John

  Hi John,.

  Thanks for the creation of an example, this of course made easier :-)

  The error you are getting is because your column name is different from the column name in your query.

  I changed your query to this ("CheckBox" checkbox)

  select
  "ROWID",
  "EMPNO",
  "ENAME",
  "JOB",
  "MGR",
  "HIREDATE",
  "SAL",
  "COMM",
  "DEPTNO",
  "CHECKBOX"
  from "#OWNER#"."EMP"
  

  Your box was also no definition LOV so I wrote 'Y, N' it

  It seems to work now.

• Select all the check box in the grid

  Hello

  Creating dynamic multiple checkbox which are placed in a table format in the grid.

  (a) how to select the check box and clicking a button

  (b) how to find how many check box are selected at the click of a button

  Thanks in advance

  Hi Srinth,

  Have you tested the code... He works for you...?

  His perfectly straight work on my side...

  Thank you

  Jean Claude Chari

• To access the check boxes in the user interface programmatically

  Hi all
  I have the following usecase.
  1. I have a table that has 3 columns, first two columns are read only output of the label component and the third column is a checkbox.
  2. I have three lines in the table.
  
  Now:
  1. when a user selects the check box and click on a "submit" button I want to check that it should have selected at least one checkbox.
  2. for which I tried to access the table from the user interface programmatically, but it does not work.
  Is there a way I can access the values?
  
  Thanks in advance,

  Hello

  The box must be bound to an attribute line in the table is related to data collection. If yes then simply loop through the lines and check if the attribute has been set. For example, if each line has a "checked" property, so you can ensure at least a line "checked = true' in your action. To access the collection, you can use something like:

  Object initialRowKey = table.getRowKey();
  try
  {
      int count = table.getRowCount();
      for (int i = 0; i < count; i++)
      {
          table.setRowIndex(i);
          MyObject row = (MyObject)table.getRowData();
          if (row.isChecked())
          {
              // do something, set a flag to true, etc.
          }
      }
  }
  finally
  {
      table.setRowKey(initialRowKey);
  }
  

  The code above assume that you linked the table to your managed bean using the "required" attribute in the table.

  Kind regards

  ~ Simon

• What happened to the PDF check box in the Menu Overview print?

  On my Win 7 Pro computer, v41.0.2 Firefox has a checkbox adjacent to the button PDF PRINT, which changes to SAVE the PDF file when the check box is selected. This GREAT feature is missing from the Firefox v41.0.2 on computer WIN - 8.1 from my wife. How is it?

  Print Edit = > you got it on the two Firefoxes?