If else check box in the table does not properly
I'm new to this forum and hope someone can help me with that.
I created a dynamic array and I have 2 types of boxes.
One is a check box for the individual lines that fills a value in a cell. Otherwise, it will be zero.
Another is a master checkbox that activates the check all lines and value box
Problem statement:
When I click on the master check box, every individual is selected. However, the value of the cell is incorrect. Value of all the rows is based on the value of the first row.
Here is my code:
Master Checkbox (using the formcal in click):
If (CheckBoxAll == "1") then
Table.Row1 [*]. CheckBox1 = "1";
Table.Row1 [*]. Cell4 = table.row1 [*]. Cell2;
on the other
Table.Row1 [*]. CheckBox1 = '0 '.
Table.Row1 [*]. Cell4 = 0;
endif
Check box for the individual line (using the formcal in click):
If (CheckBox1 == "1") then
Cell4 = Cell2
on the other
Cell4 = 0
endif
Otherwise, I tried to turn the master value of the box fill off & put a validation in each line instead. This time it works! but it kept prompting a message for each rows whenever I unchecked the box: "the value of Checkbox1 is not valid.
Here is my code:
Master Checkbox (using the formcal in click):
If (CheckBoxAll == "1") then
Table.Row1 [*]. CheckBox1 = "1";
on the other
Table.Row1 [*]. CheckBox1 = '0 '.
endif
Check box for the individual line (using the formcal to validate the event):
If (CheckBox1 == "1") then
Cell4 = Cell2
on the other
Cell4 = 0
endif
Appreciate all the help that I am at a loss as to why the tis error occurs and how to solve it.
Thank you!
Hello world
I managed to find a solution to my problem. I write for the benefit of any1 facing the similar problem.
I changed formcal to Javascript.
Master box (Click event):
vRows var = Table._Row1.count;
for (var i = 0; i)
{
If (this.) RawValue is "1")
{
xfa.resolveNode ("Table.Row1 [" + i + "]"). CheckBox1.rawValue = "1";
xfa.resolveNode ("Table.Row1 [" + i + "]"). Cell4.RawValue = xfa.resolveNode ("Table.Row1 [" + i + "]"). Cell2.RawValue;
}
on the other
{
xfa.resolveNode ("Table.Row1 [" + i + "]"). CheckBox1.rawValue = "0";
xfa.resolveNode ("Table.Row1 [" + i + "]"). Cell4.RawValue = 0;
}
}
Another point to note, it only works for the table of data binding. If the row in the table has been created original, somehow the Table._Row1.count does not work. It detects that the value = 1.
Thanks to all who tried to help me!
Tags: Adobe LiveCycle
Similar Questions
-
a key for the table does not exist in the table
Hi guys,.
I imported several tables of physical layer in the administration tool. So, I want to do new foreign key between tables join in the physical schema.
Required fields for posting a link between these tables are set up. When I press the ok button, an error message is displayed:
"a key corresponding to the table does not exist in the table blablabla. You want to create a? »
In fact, what is this error? I don't have all the idea about it. The number of the type of the fields is the same, the names are also the same. I think that he should not have problems to make the new foreign key. But why is it happening?
Thank youHello
It is the primary key of the first table. You might not have set this column as the primary key of this table at the level of the db.
Thank you
Imtiaz. -
Scrolling the page does not properly respond to BlackBerry Curve9360
Hello friend
I have developed applications for BlackBerry (JqueryMobile, Phonegap) the application works fine in BlackBerry Torch 9800.
But once I've installed in BlackBerry Curve9360, scrolling of the page does not properly, that I am not able to view the complete list of items and long text.
Help, please
I came up with the solution, the problem occurs because BlackBerry Curve 9360 isn't a touchscreen, there fore scroll doesn't work.
In my applications, I add 2 pages "index.html."
on the first page, you have to test if the device is not touch and redirect to the second page.
Do not use the page for "BB Curve" scroll and any other animation like CSS "" - webkit - transform: translate3d "»
The other js script go without a problem.
The page "BB Curve" to redesign the html for use with the cursor,
For example, the menu is smaller, the police is smaller.
the size of the screen is fixed.
Dimension height is better indicate a value min eg 300px
etc... -
Select the check box for the table of the ADF
Hi all
I want to add the check box in front of each line. The user will select the row by clicking the box and going to treatment by clicking on a button.
I just almost all possible discussions on OTN.
What I've done so now
1] added a transitional Boolean attribute in my VO. added as a selectBooleanCheckbox in .jspx page.
[2] a button with backing bean that will do the processing. [He will pick up the attributes of all ranks and be written in a file]
[* 3] it works fine if I use the default option of line by Ctel selection + A, or by pressing Ctrl + click or SHIFT + arrow key. Backing bean is not the issue.*
[4] try to intercept the TableSelection Listner also.
It comes
When I select the check box, only the last selected line is processed and not all lines. How to make the selectable online by clicking on the checkbox.
I use JDeveloper 11.1.1.5
Refered links
http://www.gebs.ro/blog/Oracle/Oracle-ADF-row-selection-using-checkboxes/
http://technology.AMIS.nl/2010/07/29/ADF-11g-select-all-rows-in-an-ADF-table/
http://Sameh-Nassar.blogspot.nl/2009/12/use-checkbox-for-selecting-multiple.html
http://www.Oracle.com/technetwork/developer-tools/ADF/learnmore/99-checkbox-for-delete-in-table-1539659.PDF
Mukesh.https://www.dropbox.com/s/1gqsaobgyjycie6/AddDeleteEmployees.rar
-
Go back to the snapshot does not properly
Hello everyone
I did a VM machine to make images on, in order to get own image as possible. And during this process, I took a lot of pictures and came back, but now it seems that the revenant does not work. It does not the machine in the State wherever it was, even if the server indicates its restored.
Any suggestions on this?
Greetings Slasky
No, do not remove them. There are references to these. Create a new snapshot and remove it via the Web GUI. Then all the others should go, as well.
If this does not work, we can manually delete snapshots.
AWo
VCP 3 & 4
Author @ vmwire.net
\[:o]===\[o:]
= You want to have this ad as a ringtone on your mobile phone? =
= Send 'Assignment' to 911 for only $999999,99! =
-
Hello
on my jspx page I want to delete lines that are selected by box in a table.
I took a temporary variable in view, I need a viewRowImpl method that returns the key of the selected lines.
If possible give me a code example.
Thanks in advance
VikasHello
Here's an example how you can do this:
String selectedColumnName = "IsRowSelected; transient domain name
CollectionModel tableModel = (CollectionModel) table.getValue (); the table is richeTableau object bound to a component af:table
JUCtrlHierBinding = adfModel
(JUCtrlHierBinding) tableModel.getWrappedData ();
Rank [] allRows = adfModel.getAllRowsInRange ();
for (int i = 0; i)< allrows.length;="" i++)="">
Line line = allRows\ [jemti];Selected Boolean = (Boolean) row.getAttribute (selectedColumnName); transient field type cast
If {(selected)
Row.Remove ();
}}
or using ViewRowImpl:
....
Selected Boolean = (Boolean) rowView.getAttribute (selectedColumnName);
If {(selected)
rowView.remove ();
}
...Hope it helps you,
A beautiful day,
Bogdan -
the tables does not work in flash lite
I couldn't get a multidimensional array to work in flash lite, then tried a regular table - is not no longer works.
Copy the following code works:
var myVar;
myVar = 5;
answer_true_button_btn.onPress = function() {}
points_txt. Text = String (myVar);
};
This code does not work:
var myVar:Array = new Array (5);
myVar [0] = 5;
answer_true_button_btn.onPress = function() {}
points_txt. Text = String (myVar [0]);
};
Now do multidimensional arrays.
I tried in Flash Lite 2 and 2.1.Here's the problem: I had 1 selected ActionScript (even if Flash Lite 2.1 has been selected in the box 'Version') in the publication settings. Apparently, you write in AS 1 or 2 AS and publish in Flash Lite x.x.
Flash Lite 1.1 does not support tables, with the exception of the latest version.
-
'Lines' of the table does not automatically extend as added content?
This is a table of Storyboard, built with a simple table. Three columns: one for the images, one as a spacer, a text.
I did the storyboard to the origin in the Pages, and then converted in Word to work with a partner, now converted to Pages yet. It seems to be OK except for one thing:
Before, when I would write in the text of the text column... the line would extend automatically as the text was written, at least in the size of a page.
Now, I think lines are somehow "locked" and does not (at least one page), extend this text and images, are "hiding" because the line is not normally develop as she would have.
Is there some click preferably a place that keeps my lines to a constant size, any content is in every cell?
Or maybe it's a corruption caused by going to Word and back?
All ears,
Ben
V4.3 Pages ' 09, or permit Pages v5.6.2 splitting a line beyond the limits of the page, so limit the content of text in a cell a to a single page. I just copy and paste a page full of text and he dropped in the first row, cell 3. It is automatically extended to the bottom of the page and not details. There is no hidden settings in Pages that will be substituted for this limitation.
-
Insert in the table, the table does not grow
I'm currently learning Labview 2009.
Problem:
I have a chart 2D with 3 columns I initialize outside my main loop. In my loop, I want to add new lines in the table as I collect the data. I tried to use "Insert into array" but can't seem to get new lines to add.
I've attached an example VI to show you what I'm doing. Basically, I initialize the table outside the loop to 0 rows, 3 columns. Inside the loop, I look at the number of rows found and then try to insert a 1 d of the 3 column table.
I am an old VS / encoder VB trying to adapt some skills to Labview.
The purpose of this table is also to collect temperatures over a period of time and to determine the overall variation over a given period. Additional ideas would be welcome.
You can use a shift register and build the table. See attached example
-
color of the table does not reset
My table (TABLE of SUM AVG) is supposed to show entries below zero in red. He has a little problem. The first time that it works, but the second time that the color of the text will not return to black when I run again.
He remembers the entries that were red on front. Based on my wiring below, the second time I run it, it must set the background color to the light yellow and black text, then make loops for.
BTW, I also used a sequence flat to force this order, but that did not help.
Hi murchak,
What can be seen in your picture you
-only value a "yellow light" cell background: ActiveCell = (2, 2)
-and then you assign the first 3 lines "light green" background
-then you set some cells, according to their value to red. (Btw. There is a special ' ")<0" function="" in="" the="" comparison="">0">
There is no place where set you a black background for all cells.
Maybe you should try ActiveCell (-2; -2) instead?
-
How to generate a value of 0 if the table does not value contain?
Hello
I have a nice select gives me these results:
f? p =: 2::GET_DETAIL_REPORT:NO:P2_VALUE:01 36.6 01/2008
f? p =: 2::GET_DETAIL_REPORT:NO:P2_VALUE:02 63.4 02/2008
f? p =: 2::GET_DETAIL_REPORT:NO:P2_VALUE:03 73.2 03/2008
f? p =: 2::GET_DETAIL_REPORT:NO:P2_VALUE:04 78.6 04/2008
f? p =: 2::GET_DETAIL_REPORT:NO:P2_VALUE:05 98.8 05/2008
f? p =: 2::GET_DETAIL_REPORT:NO:P2_VALUE:06 2008-06-30.4
f? p =: 2::GET_DETAIL_REPORT:NO:P2_VALUE:07 23.8 07/2008
f? p =: 2::GET_DETAIL_REPORT:NO:P2_VALUE:08 70.8 08/2008
f? p =: 2::GET_DETAIL_REPORT:NO:P2_VALUE:09 14 2008-09
f? p =: 2::GET_DETAIL_REPORT:NO:P2_VALUE:10 60.4 10/2008
f? p =: 2::GET_DETAIL_REPORT:NO:P2_VALUE:11 46 11/2008
You see, the month 12 is missing, because no data exists in the table. OK, that's normal.
But I want to display the result 0 even if nothing in the table for the month 12. The result would be:
f? p =: 2::GET_DETAIL_REPORT:NO:P2_VALUE:01 36.6 01/2008
etc...
f? p =: 2::GET_DETAIL_REPORT:NO:P2_VALUE:11 46 11/2008
f? p =: 2::GET_DETAIL_REPORT:NO:P2_VALUE:12 0 2008-11
I know that I have to generate a list of values for each month and join them.
Could you please help me this?select add_months(to_date('01'||:P2_DATE_DEBUT, 'mm/yyyy'), level-1) dt from dual connect by level <= 12
It's nice select I already have.
Kind regardsSELECT 'f?p=&APP_ID.:2:&SESSION.:GET_DETAIL_REPORT:NO::P2_VALUE:' || TO_CHAR(TRUNC(date1, 'MM'), 'MM') LINK, To_CHAR(TRUNC(DATE1, 'MM'), 'MM/YYYY') valeur, sum(valeur) "Cumul" FROM PL_MF_JOUR WHERE cle = :P2_DEPT AND DATE1 BETWEEN to_date('01/01' || :P2_DATE_DEBUT || ' 00:00:00', 'DD/MM/YYYY HH24:MI:SS') AND to_date('01/01' || :P2_DATE_DEBUT || ' 23:59:59', 'DD/MM/YYYY HH24:MI:SS') +364 GROUP BY TRUNC(DATE1, 'MM') ORDER BY TRUNC(DATE1, 'MM')
Christian
PS: your help is very appreciated every time, thank you.You need to generate your calendar of 12 months and then left outer join with it.
Something like:
WITH dts as (select to_date('01/'to_char(rownum,'fm99')||'/'||:P2_DATE_DEBUT,'DD/MM/YYYY') as dt from dual connect by rownum <= 12) SELECT 'f?p=&APP_ID.:2:&SESSION.:GET_DETAIL_REPORT:NO::P2_VALUE:' || TO_CHAR(dt, 'MM') LINK, TO_CHAR(dt, 'MM/YYYY') valeur, sum(valeur) "Cumul" FROM dts LEFT OUTER JOIN PL_MF_JOUR ON (dt = TRUNC(DATE1,'MM') AND cle = :P2_DEPT AND DATE1 BETWEEN to_date('01/01' || :P2_DATE_DEBUT || ' 00:00:00', 'DD/MM/YYYY HH24:MI:SS') AND to_date('01/01' || :P2_DATE_DEBUT || ' 23:59:59', 'DD/MM/YYYY HH24:MI:SS')+364 ) GROUP BY dt ORDER BY dt
NB. Untested (obviously)
-
Undo the insert does not properly - Popup
Friends
To speak frankly fed up with Oracle ADF (Newbie .net was much easier)
I have a use case for the edition of Masters details... Details are displayed in the table... For detail edit and create operation I use popup with the Control Panel window.
My problem.
I used a managed bean and operation of 'Create' to add new lines of appeal. Works well, but when I cancel my code does not work, I still see a blank line in the table of means...
I get the rwStatusfrom method AM to check the status of the line. Please see the code.
If (NEW".equalsIgnoreCase (rwStatus)) {" "}
RW. Refresh(Row.REFRESH_UNDO_CHANGES |) Row.REFRESH_REMOVE_NEW_ROWS);
}
on the other
{
RW. Refresh (Row.REFRESH_UNDO_CHANGES);
}
If I add dtIter.getViewObject () .clearCache (); the code above Houston line concurrency exception is thrown, but new line is deleted.
I even regenerated my table... No use.
At the beginning I used "CreateInsert" for the insert operation and it was much easier remove the line but the question during the insertion of the first record my validation was immediately called in the showPopup (before adding data) so I tried the "Create" operation.
Advice me please. I'm in the third day with this problem. (Creation of Bothe and CreateInsert works perfectly well in a form (view) but only question in popup).
Thank you
Published by: KK_Ash on May 26, 2013 08:13Hello
in fact + "to speak frankly fed up with Oracle ADF (Newbie .net was much easier)" + "
is a very very very bad start for a question of aid - honestly. Its never a good idea to disrupt a forum before asking for their time to solve your problem. To delete the line of the display, you must remove the link layer and not in the morning (which should get updated automatically). Then in the dialog box change the logic to cancel it if you access the current row of the iterator
BindingContext bctx = BindingContext.getCurrent(); BindingContainer bindings = bctx.getCurrentBindingsEntry(); DCIteratorBinding iter = (DCIteratorBinding ) bindings.get("iterator name"); iter.getCurrentRow().remove();
See for how to handle the OK/Cancel button in a dialog box: http://www.oracle.com/technetwork/developer-tools/adf/learnmore/77-ok-cancel-support-in-dialog-351871.pdf
(which is basically your use case)
Frank
-
Re: x 505-"turn off the display" does not properly
To make a long story short, I had a load of problems with my Toshiba Qosmio X 505. I talked to tech support and they had me completely clear the computer and reinstall the OS. Everything has been fine for days until today!
For some reason any whenever my screen turns off (for energy saving), I can't get my computer to respond. I don't know if he's asleep, going into hibernation mode, or even the difference between one of these things, but when I press the buttons, move the mouse/Touchpad, try multimedia keys, the power button, nothing makes my computer come back. I have to hold the power button / stop and completely restard come back again the computer.
Why is this happening? It worked great for everyday, but I think it has something to do with the NVIDIA driver update I downloaded. It is the main change I have made to the computer yesterday and now it seems to do. Does anyone have recommendations? How can I make my computer stop doing that? I have all the options of my black screen off for now, but that does not seem a good solution for this problem that he used to work properly.
Hey,.
Akuma is right, you should only use the display drivers provided by Toshiba and not nVidia. The nVidia drivers are not pre-tested and that's the reason why they can cause such problems. Also they don t have an overheating protection, installation happens on your own risk.
If you need to test it with the drivers from the official website of Toshiba. Prior to installation, remove the current display driver, and then restart the computer. Then you can begin with the installation of Toshiba display drivers.
In the worst case it of necessary to reinstall the whole system again, but before that, you try a system restore to an earlier point.
-
Android version of the site does not properly.
I created a site with a mobile version, that works perfectly on the iPhone, but the horizontal Android version does not seem to be scaling to fit in horizontally. There is nothing complex in the site and all images seem to stay the same size and hugging the left during a rotation.
Hello Akshay,
Thanks for the research on the question for me. I can get to the bottom of it. I was design to the default size of phone Muse. My Android device seems to have a high resolution, so it does not move up. Pushing the page width to 640px it seems to work. Probably a stupid mistake on my part!
Kind regards
Matt
-
Wind of the filter does not properly - CS5
Hello
Maybe because its Friday, but for some reason my wind filter is not create the "plotters" or "trails" that I'm used to seeing.
My goal is to create a movement on white text effect. "Tails" do not grow in length when duplicate filter on & more as it should. What I am doing wrong?
Example:
This is the text after the filter is applied once.
Here is an example after the 3rd time of application of the wind filter.
As you can see, the streaks are still in the text. It does not create fine streaks that I need.
Probably I'm missing something obvious, but I can't find a solution to this anywhere.
Thank you!
-CM
Bright pixel is blown out in the dark. See the thread: trouble with wind tool.
Maybe you are looking for
-
DVD drive sees no disc in the drive
A month or two ago, I bought 2 games. 1 has played without problems. The second drive, my drive does not even recognize. It is said that there is no disc in the drive. I exchanged the drive for another, same thing. I contacted Ubisoft (Distributor)
-
QuickBooks not compatibul with Windows 2010
I run a small mom & pop (Marinette WI). I just upgraded to QuickBooks 2016 with payroll increased to $600,00 is not compatible with the new window. WOW! Do not be angry with what I "m gong to say. My company is located in a small rural community. M
-
BlackBerry 10 cannot download BlackBerry world no more
Hi people, I just upgraded from my beloved 9900 to the classic.FO the first 2 days that I could download Apps from the BB world. Tanning without doing anything suspicious, I can't download or even spend any application to the BB world.Everything is f
-
Two independent hard drives, two flavours of boot and two independent Copies of Windows 7
I have a machine workstation with two processors, two graphics cards and the three hard drive bays. My OEM it comes with a 500 GB HDD standard on drive C:\ with Windows 7 installed. I installed all my applications and data, and I run the Windows ba
-
Good day to you all:Today, finally, after fighting my boss for 3 years, I will be upgrading APEX 2.1 (YES, I YOU READ RIGHT) at APEX 5.0.Are there specific issues I should know about? Should I upgrade to 4.0 first, and then to 5.0? Am I at risk of